- 28 Jul, 2022 4 commits
-
-
Dario Binacchi authored
In the driver there are parts of code where the prefix `slc' is used and others where the prefix `slcan' is used instead. The patch replaces every occurrence of `slc' with `slcan', except for the netdev functions where, to avoid compilation conflicts, it was necessary to replace `slc' with `slcan_netdev'. The patch does not make any functional changes. Signed-off-by:
Dario Binacchi <dario.binacchi@amarulasolutions.com> Link: https://lore.kernel.org/all/20220728070254.267974-5-dario.binacchi@amarulasolutions.comSigned-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Dario Binacchi authored
Taking inspiration from the drivers/net/can/can327.c driver and at the suggestion of its author Max Staudt, I removed legacy stuff like `SLCAN_MAGIC' and `slcan_devs' resulting in simplification of the code and its maintainability. The use of slcan_devs is derived from a very old kernel, since slip.c is about 30 years old, so today's kernel allows us to remove it. The .hangup() ldisc function, which only called the ldisc .close(), has been removed since the ldisc layer calls .close() in a good place anyway. The old slcanX name has been dropped in order to use the standard canX interface naming. The ioctl SIOCGIFNAME can be used to query the name of the created interface. Furthermore, there are several ways to get stable interfaces names in user space, e.g. udev or systemd-networkd. The `maxdev' module parameter has also been removed. CC: Max Staudt <max@enpas.org> Signed-off-by:
Max Staudt <max@enpas.org> Link: https://lore.kernel.org/all/20220728070254.267974-4-dario.binacchi@amarulasolutions.comSigned-off-by:
-
Dario Binacchi authored
Include only the necessary headers. Signed-off-by:
-
Vincent Mailhol authored
The driver uses the string "slcan" to populate tty_ldisc_ops::name. KBUILD_MODNAME also evaluates to "slcan". Use KBUILD_MODNAME to get rid on the hardcoded string names. Similarly, the pr_info() and pr_err() hardcoded the "slcan" prefix. Define pr_fmt so that the "slcan" prefix gets automatically added. CC: Dario Binacchi <dario.binacchi@amarulasolutions.com> Signed-off-by:
Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by:
-
- 27 Jul, 2022 4 commits
-
-
Marc Kleine-Budde authored
Vincent Mailhol <mailhol.vincent@wanadoo.fr> says: ==================== The c_can, flexcan and slcan use a setter function to populate net_device::ethtool_ops. Using a setter here add one additional function call and add some small bloat in the object file. Exporting the structure allow to remove this setter. The mcp251xfd uses a similar pattern except that it does some additional initialization. As such, this driver is left untouched. * Statistics * For the slcan driver, this patch reduces the object file by 14 bytes (details in the first patch). Although we did not conduct a benchmark for the other drivers but we expect the exact same figures. ==================== Link: https://lore.kernel.org/all/20220727104939.279022-1-mailhol.vincent@wanadoo.frSigned-off-by:
-
Vincent Mailhol authored
The function flexcan_set_ethtool_ops() does one thing: populate net_device::ethtool_ops. Instead, it is possible to directly assign this field and remove one function call and slightly reduce the object size. To do so, export flexcan_ethtool_ops so it becomes visible to flexcan-core.c. Signed-off-by:
-
Vincent Mailhol authored
The function c_can_set_ethtool_ops() does one thing: populate net_device::ethtool_ops. Instead, it is possible to directly assign this field and remove one function call and slightly reduce the object size. To do so, export c_can_ethtool_ops so it becomes visible to c_can_main.c. Signed-off-by:
-
Vincent Mailhol authored
The function slcan_set_ethtool_ops() does one thing: populate net_device::ethtool_ops. Instead, it is possible to directly assign this field and remove one function call and slightly reduce the object size. To do so, export slcan_ethtool_ops so it becomes visible to sclan-core.c. This patch reduces the footprint by 14 bytes: | $ ./scripts/bloat-o-meter drivers/net/can/slcan/slcan.{old,new}.o | drivers/net/can/slcan/slcan.o | add/remove: 0/1 grow/shrink: 1/0 up/down: 15/-29 (-14) | Function old new delta | slcan_open 1010 1025 +15 | slcan_set_ethtool_ops 29 - -29 | Total: Before=11115, After=11101, chg -0.13% Signed-off-by:
-
- 26 Jul, 2022 20 commits
-
-
Marc Kleine-Budde authored
Vincent Mailhol <mailhol.vincent@wanadoo.fr> says: ==================== This is a cleanup series. The patches 1 to 8 get rid of any hardcoded strings and instead relies on the KBUILD_MODNAME macros to get the device name. Patch 9 replaces the ES58X_MODULE_NAME macro with KBUILD_MODNAME in etas_es58x. Finally, also in etas_es58x, patch 10 removes the DRV_VERSION so that the module uses the default behavior and advertise the kernel version instead of a custom version. * Changelog * v1 -> v2: * The patch for esd_usb contained some changes for ems_usb. * v1 assumed that KBUILD_MODNAME could only be used when the file basename and the module had the same name (e.g. vcan.c for the vcan.ko). The fact is that KBUILD_NAME extends to the module name and can thus be used even if the basename is different (e.g. slcan-core.c and slcan.ko) * Add patch #9: can: etas_es58x: replace ES58X_MODULE_NAME with KBUILD_MODNAME v1: https://lore.kernel.org/all/20220725153124.467061-1-mailhol.vincent@wanadoo.fr This series are the first 9 patches of: https://lore.kernel.org/linux-can/20220725133208.432176-1-mailhol.vincent@wanadoo.fr/T/ The initial intent of those 9 patches was to do so cleanup in order to implement ethtool_ops::get_drvinfo but this appeared to be useless: https://lore.kernel.org/linux-can/20220725140911.2djwxfrx3kdmjeuc@pengutronix.de/ Instead, those patch are send as a standalone series. ==================== Drop "[PATCH v2 03/10] can: slcan: use KBUILD_MODNAME and define pr_fmt to replace hardcoded names" to avoid conflicts with Dario Binacchi's work on the slcan driver. Link: https://lore.kernel.org/all/20220726082707.58758-1-mailhol.vincent@wanadoo.frSigned-off-by: -
Vincent Mailhol authored
DRV_VERSION is a leftover from when the driver was an out of tree module. The driver version was never incremented despite of the numerous changes made since it was mainstreamed. Keeping an unmaintained driver version number makes no sense. Remove it and rely on the kernel version instead. Signed-off-by:
-
Vincent Mailhol authored
ES58X_MODULE_NAME is set to "etas_es58x". KBUILD_MODNAME also evaluates to "etas_es58x". Get rid of ES58X_MODULE_NAME and rely on KBUILD_MODNAME instead. Signed-off-by:
-
Vincent Mailhol authored
The driver uses the string "usb_8dev" to populate usb_driver::name and can_bittiming_const::name. KBUILD_MODNAME also evaluates to "ubs_8dev". Use KBUILD_MODNAME and get rid on the hardcoded string names. Signed-off-by:
-
Vincent Mailhol authored
The driver uses the string "kvaser_usb" to populate usb_driver::name. KBUILD_MODNAME also evaluates to "kvaser_ubs". Use KBUILD_MODNAME and get rid on the hardcoded string names. Signed-off-by:
-
Vincent Mailhol authored
The driver uses the string "gs_usb" to populate usb_driver::name, can_bittiming_const::name and can_data_bittiming_const::name. KBUILD_MODNAME evaluates to "gs_ubs". Use KBUILD_MODNAME and get rid on the hardcoded string names. Signed-off-by:
-
Vincent Mailhol authored
The driver uses the string "ems_usb" to populate usb_driver::name. KBUILD_MODNAME also evaluates to "esd_ubs". Use KBUILD_MODNAME and get rid on the hardcoded string names. CC: Frank Jungclaus <frank.jungclaus@esd.eu> Signed-off-by:
-
Vincent Mailhol authored
The driver uses the string "softing" to populate platform_driver::name and can_bittiming_const::name. KBUILD_MODNAME also evaluates to "softing". Use KBUILD_MODNAME and get rid on the hardcoded string names. Signed-off-by:
-
Vincent Mailhol authored
The driver uses the string "ems_usb" to populate usb_driver::name and can_bittiming_const::name. KBUILD_MODNAME also evaluates to "ems_ubs". Use KBUILD_MODNAME and get rid on the hardcoded string names. Signed-off-by:
-
Vincent Mailhol authored
The driver uses the string "can327" to populate tty_ldisc_ops::name. KBUILD_MODNAME also evaluates to "can327". Use KBUILD_MODNAME and get rid on the hardcoded string names. Signed-off-by:
-
Marc Kleine-Budde authored
The driver uses only 1 TEF and 1 TX ring, but a variable number of RX rings. Fix comment accordingly. Fixes: e0ab3dd5 ("can: mcp251xfd: add dev coredump support") Link: https://lore.kernel.org/all/20220726084328.4042678-1-mkl@pengutronix.deSigned-off-by:
-
Jakub Kicinski authored
Christian Marangi says: ==================== Add MTU change with stmmac interface running This series is to permit MTU change while the interface is running. Major rework are needed to permit to allocate a new dma conf based on the new MTU before applying it. This is to make sure there is enough space to allocate all the DMA queue before releasing the stmmac driver. This was tested with a simple way to stress the network while the interface is running. 2 ssh connection to the device: - One generating simple traffic with while true; do free; done - The other making the mtu change with a delay of 1 second The connection is correctly stopped and recovered after the MTU is changed. The first 2 patch of this series are minor fixup that fix problems presented while testing this. One fix a problem when we renable a queue while we are generating a new dma conf. The other is a corner case that was notice while stressing the driver and turning down the interface while there was some traffic. (this is a follow-up of a simpler patch that wanted to add the same feature. It was suggested to first try to check if it was possible to apply the new configuration. Posting as RFC as it does major rework for the new concept of DMA conf) ==================== Link: https://lore.kernel.org/r/20220723142933.16030-1-ansuelsmth@gmail.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Christian Marangi authored
Remove the limitation where the interface needs to be down to change MTU by releasing and opening the stmmac driver to set the new MTU. Also call the set_filter function to correctly init the port. This permits to remove the EBUSY error while the ethernet port is running permitting a correct MTU change if for example a DSA request a MTU change for a switch CPU port. Signed-off-by:
Christian Marangi <ansuelsmth@gmail.com> Signed-off-by:
-
Christian Marangi authored
Rework the driver to generate the stmmac dma_conf before stmmac_open. This permits a function to first check if it's possible to allocate a new dma_config and then pass it directly to __stmmac_open and "open" the interface with the new configuration. Signed-off-by:
-
Christian Marangi authored
Move dma buf conf to dedicated struct. This in preparation for code rework that will permit to allocate separate dma_conf without affecting the priv struct. Signed-off-by:
-
Christian Marangi authored
Disable all queues and disconnect before tx_disable in stmmac_release to prevent a corner case where packet may be still queued at the same time tx_disable is called resulting in kernel panic if some packet still has to be processed. Signed-off-by:
-
Christian Marangi authored
Move queue reset to dedicated functions. This aside from a simple cleanup is also required to allocate a dma conf without resetting the tx queue while the device is temporarily detached as now the reset is not part of the dma init function and can be done later in the code flow. Signed-off-by:
-
William Dean authored
delete extra space and tab in blank line, there is no functional change. Reported-by:
Hacash Robot <hacashRobot@santino.com> Signed-off-by:
William Dean <williamsukatube@gmail.com> Link: https://lore.kernel.org/r/20220723073222.2961602-1-williamsukatube@163.comSigned-off-by:
-
Jakub Kicinski authored
Merge tag 'wireless-next-2022-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v5.20 Third set of patches for v5.20. MLO work continues and we have a lot of stack changes due to that, including driver API changes. Not much driver patches except on mt76. Major changes: cfg80211/mac80211 - more prepartion for Wi-Fi 7 Multi-Link Operation (MLO) support, works with one link now - align with IEEE Draft P802.11be_D2.0 - hardware timestamps for receive and transmit mt76 - preparation for new chipset support - ACPI SAR support * tag 'wireless-next-2022-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (254 commits) wifi: mac80211: fix link data leak wifi: mac80211: mlme: fix disassoc with MLO wifi: mac80211: add macros to loop over active links wifi: mac80211: remove erroneous sband/link validation wifi: mac80211: mlme: transmit assoc frame with address translation wifi: mac80211: verify link addresses are different wifi: mac80211: rx: track link in RX data wifi: mac80211: optionally implement MLO multicast TX wifi: mac80211: expand ieee80211_mgmt_tx() for MLO wifi: nl80211: add MLO link ID to the NL80211_CMD_FRAME TX API wifi: mac80211: report link ID to cfg80211 on mgmt RX wifi: cfg80211: report link ID in NL80211_CMD_FRAME wifi: mac80211: add hardware timestamps for RX and TX wifi: cfg80211: add hardware timestamps to frame RX info wifi: cfg80211/nl80211: move rx management data into a struct wifi: cfg80211: add a function for reporting TX status with hardware timestamps wifi: nl80211: add RX and TX timestamp attributes wifi: ieee80211: add helper functions for detecting TM/FTM frames wifi: mac80211_hwsim: handle links for wmediumd/virtio wifi: mac80211: sta_info: fix link_sta insertion ... ==================== Link: https://lore.kernel.org/r/20220725174547.EA465C341C6@smtp.kernel.orgSigned-off-by:
-
Alexander Stein authored
These properties are inherited from ethernet-controller.yaml. This fixes the dt_binding_check warning: imx8mm-tqma8mqml-mba8mx.dt.yaml: ethernet@30be0000: 'nvmem-cell-names', 'nvmem-cells' do not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by:
Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220720063924.1412799-1-alexander.stein@ew.tq-group.comSigned-off-by:
-
- 25 Jul, 2022 12 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo authored
ath.git patches for v5.20. One fix and rest minor cleanup.
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueDavid S. Miller authored
Tony Nguyen says: ==================== 40GbE Intel Wired LAN Driver Updates 2022-07-22 This series contains updates to i40e and iavf drivers. Przemyslaw adds a helper function for determining whether TC MQPRIO is enabled for i40e. Avinash utilizes the driver's bookkeeping of filters to check for duplicate filter before sending the request to the PF for iavf. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Lorenzo Bianconi authored
A typical flow offload scenario for OpenWrt users is routed traffic received by the wan interface that is redirected to a wlan device belonging to the lan bridge. Current implementation fails to fill wdma offload info in mtk_flow_get_wdma_info() since odev device is the local bridge. Fix the issue running dev_fill_forward_path routine in mtk_flow_get_wdma_info in order to identify the wlan device. Tested-by:
Paolo Valerio <pvalerio@redhat.com> Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: Spectrum-2 PTP preparations This patchset includes various preparations required for Spectrum-2 PTP support. Most of the changes are non-functional (e.g., renaming, adding registers). The only intentional user visible change is in patch #10 where the PHC time is initialized to zero in accordance with the recommendation of the PTP maintainer. ==================== Signed-off-by: -
Amit Cohen authored
The function mlxsw_sp_ptp_phc_adjfreq() configures MTUTC register to adjust hardware frequency by a given value. This configuration will be same for Spectrum-2. In preparation for Spectrum-2 PTP support, rename the function to not be Spectrum-1 specific. Later, it will be used for Spectrum-2 also. Signed-off-by:
Amit Cohen <amcohen@nvidia.com> Reviewed-by:
Petr Machata <petrm@nvidia.com> Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
-
Amit Cohen authored
Spectrum-1 and Spectrum-2 differ in their time stamping capabilities. The former can be configured to time stamp only a subset of received PTP events (e.g., only Sync), whereas the latter will time stamp all PTP events or none. In preparation for Spectrum-2 PTP support, rename the function that parses the hardware time stamping configuration upon %SIOCSHWTSTAMP to be Spectrum-1 specific. Signed-off-by:
-
Amit Cohen authored
Currently, there is one shared structure that holds the required structures for PTP clock. Most of the existing fields are relevant only for Spectrum-1 (cycles, timecounter, and more). Rename the structure to be specific for Spectrum-1 and align the existing code. Add a common structure which includes the structures which will be used also for Spectrum-2. This structure will be returned from clock_init() operation, as the definition is shared between all ASICs' operations. Signed-off-by:
-
Amit Cohen authored
Currently, there is one shared structure that holds the required structures and details for PTP. Most of the existing fields are relevant only for Spectrum-1 (hash table, lock for hash table, delayed work, and more). Rename the structure to be specific for Spectrum-1 and align the existing code. Add a common structure which includes 'struct mlxsw_sp *mlxsw_sp' and will be returned from ptp_init() operation, as the definition is shared between all ASICs' operations. Signed-off-by:
-
Amit Cohen authored
Currently, the reading of FRC values (high and low) is done using macro which calls to a function. In addition, to calculate the offset of FRC, a simple macro is used. This code can be simplified by adding an helper function and calculating the offset explicitly instead of using an additional macro for that. Add the helper function and convert the existing code. This helper will be used later to read UTC clock. Signed-off-by:
-
Amit Cohen authored
As lately recommended in the mailing list[1], set the clock to zero time as part of initialization. The idea is that when the clock reads 'Jan 1, 1970', then it is clearly wrong and user will not mistakenly think that the clock is set correctly. If as part of initialization, the driver sets the clock, user might see correct date and time (maybe with a small shift) and assume that there is no need to sync the clock. Fix the existing code of Spectrum-1 to set the 'timecounter' to zero. [1]: https://lore.kernel.org/netdev/20220201191041.GB7009@hoboy.vegasvil.org/Signed-off-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Danielle Ratson authored
Rename the 'read_frc_capable' bit to 'read_clock_capable' since now it can be both the FRC and UTC clocks. Signed-off-by:
Danielle Ratson <danieller@nvidia.com> Reviewed-by:
-
Amit Cohen authored
Add a resource identifier for maximum number of FIDs so that it could be later used to query the information from firmware. In Spectrum-2 and Spectrum-3, the correction field of PTP packets which are sent as control packets is not updated at egress port. To overcome this limitation, some packets will be sent as data packets. The header should include FID, which is supposed to be 'Max FID + port - 1'. As preparation, add the required resource, to be able to query the value from firmware later. Signed-off-by:
-
