- 22 Nov, 2018 8 commits
-
-
Sean Young authored
The function get_key_hvr1110 can only decode rc5, however this is a standard hauppauge z8f0811 which can decode rc6 as well. Use get_key_haup_xvr() instead. Tested on a HVR 1110. Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Sean Young authored
Before this patch, the rc name is truncated to: saa7134 IR (Hauppauge WinTV-HVR Now it is: Hauppauge WinTV-HVR1150 ATSC/QAM-Hybrid Signed-off-by:
-
Sean Young authored
Previously, the code would loop for each of the 40 bits. Now it will branch for each edge in the IR, which will be much less. Signed-off-by:
-
Sean Young authored
The xbox dvd remote sends 24 bits, the first 12 bits are repeated and inverted so only 12 bits are used. The upper 4 bits can be read at offset 3. Ensure we pass this to rc-core and update the keymap accordingly. Tested-by:
Benjamin Valentin <benpicco@googlemail.com> Signed-off-by:
-
Benjamin Valentin authored
The Xbox DVD Movie Playback Kit is a USB dongle with an IR remote for the Original Xbox. Historically it has been supported by the out-of-tree lirc_xbox driver, but this one has fallen out of favour and was just dropped from popular Kodi (formerly XBMC) distributions. This driver is heavily based on the ati_remote driver where all the boilerplate was taken from - I was mostly just removing code. Signed-off-by:
-
Brad Love authored
The three following Hauppauge USB DVB devices have IR receivers, but lacked the support in mceusb to enable it: - WinTV-HVR-935C - WinTV-HVR-955Q - WinTV-HVR-975 Tested HVR-955Q and HVR-975 plus RC5 remote and irw, works as intended. Signed-off-by:
Brad Love <brad@nextdimension.cc> Signed-off-by:
-
Ettore Chimenti authored
Introduce support for Consumer-IR into seco-cec driver, as it shares the same interrupt for receiving messages. The device decodes RC5 signals only, defaults to hauppauge mapping. It will spawn an input interface using the RC framework (like CEC device). Signed-off-by:
Ettore Chimenti <ek5.chimenti@gmail.com> Reviewed-by:
Hans Verkuil <hansverk@cisco.com> Signed-off-by:
-
Ettore Chimenti authored
This patch adds support to the CEC device implemented with a STM32 microcontroller in X86 SECO Boards, including UDOO X86. The communication is achieved via Braswell integrated SMBus (i2c-i801). The driver use direct access to the PCI addresses, due to the limitations of the specific driver in presence of ACPI calls. The basic functionalities are tested with success with cec-ctl and cec-compliance. Inspired by cros-ec-cec implementation, attaches to i915 driver cec-notifier. Signed-off-by:
Jacopo Mondi <jacopo@jmondi.org> Signed-off-by:
-
- 20 Nov, 2018 11 commits
-
-
Hans Verkuil authored
Now vidioc_cropcap is only used to return the pixelaspect, so rename it accordingly. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Tested-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Hans Verkuil authored
Now that all drivers have dropped vidioc_g/s_crop we can remove support for them in the V4L2 core. Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Tested-by:
-
Hans Verkuil authored
Replace g/s_crop by g/s_selection and set the V4L2_FL_QUIRK_INVERTED_CROP flag since this is one of the old drivers that predates the selection API. Those old drivers allowed g_crop when it really shouldn't have since g_crop returns a compose rectangle instead of a crop rectangle for the CAPTURE stream, and vice versa for the OUTPUT stream. Also drop the now unused vidioc_cropcap. Signed-off-by:
-
Hans Verkuil authored
Replace g/s_crop by g/s_selection and set the V4L2_FL_QUIRK_INVERTED_CROP flag since this is one of the old drivers that predates the selection API. Those old drivers allowed g_crop when it really shouldn't have since g_crop returns a compose rectangle instead of a crop rectangle for the CAPTURE stream, and vice versa for the OUTPUT stream. Also drop the now unused vidioc_cropcap. Signed-off-by:
-
Hans Verkuil authored
The g_crop really implemented composition for the CAPTURE stream. Replace g_crop by g_selection and set the V4L2_FL_QUIRK_INVERTED_CROP flag since this is one of the old drivers that predates the selection API. Those old drivers allowed g_crop when it really shouldn't have since g_crop returns a compose rectangle instead of a crop rectangle. Signed-off-by:
-
Hans Verkuil authored
Replace the use of struct v4l2_crop by struct v4l2_selection. Also drop the unused gsc_g_crop function. Signed-off-by:
-
Hans Verkuil authored
If g_selection is implemented, then the v4l2-ioctl cropcap code assumes that cropcap just implements the pixelaspect part and that g_selection provides the crop bounds and default rectangles. There are still some drivers that only implement cropcap and not g_selection. Split up cropcap into a cropcap and g_selection for those drivers. Signed-off-by:
-
Hans Verkuil authored
This function/callback is never used. Drop it. Signed-off-by:
-
Hans Verkuil authored
Some old Samsung drivers use the legacy crop API incorrectly: the crop and compose targets are swapped. Normally VIDIOC_G_CROP will return the CROP rectangle of a CAPTURE stream and the COMPOSE rectangle of an OUTPUT stream. The Samsung drivers do the opposite. Note that these drivers predate the selection API. If this 'QUIRK' flag is set, then the v4l2-ioctl core will swap the CROP and COMPOSE targets as well. That way backwards compatibility is ensured and we can convert the Samsung drivers to the selection API. Signed-off-by:
-
Hans Verkuil authored
This ensures that they won't be used in kernel code. Signed-off-by:
-
Hans Verkuil authored
Drop the deprecated _ACTIVE part. Signed-off-by:
-
- 06 Nov, 2018 19 commits
-
-
Julia Lawall authored
The fields of a v4l2_subdev_ops structure are all const, so the structures that are stored there and are not used elsewhere can be const as well. Done with the help of Coccinelle. Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Julia Lawall authored
The v4l2_ctrl_ops structure is only passed as the second argument to functions such as v4l2_ctrl_new_std for which the corresponding parameter is const, so make the v4l2_ctrl_ops structure const as well. Done with the help of Coccinelle. Signed-off-by:
-
Chiranjeevi Rapolu authored
Check for possible null pointer to avoid crash. Signed-off-by:
Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com> Signed-off-by:
-
Ricardo Ribalda Delgado authored
Add a V4L2 sub-device driver for the Sony IMX214 image sensor. This is a camera sensor using the I2C bus for control and the CSI-2 bus for data. Tested on a DB820c alike board with Intrinsyc Open-Q 13MP camera. [Sakari Ailus: squash exposure time max limit patch] Signed-off-by:
Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Reviewed-by:
-
Ricardo Ribalda Delgado authored
Document bindings for imx214 camera sensor [Sakari Ailus: Move MAINTAINERS entry here, fix DT binding filename] Cc: devicetree@vger.kernel.org Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Rajmohan Mani authored
Removed redundant CIO2_IMAGE_MAX_* definitions Fixes: c2a6a07a ("media: intel-ipu3: cio2: add new MIPI-CSI2 driver") Signed-off-by:
Rajmohan Mani <rajmohan.mani@intel.com> Signed-off-by:
-
Sakari Ailus authored
The ipu3-cio2 driver has a function to tear down video devices as well as the associated video buffer queues. Use it. Signed-off-by:
Bingbu Cao <bingbu.cao@intel.com> Reviewed-by:
-
Sakari Ailus authored
While there are issues related to object lifetime management, unregister the media device first, followed immediately by other device nodes when the driver is being unbound. Only then the resources needed by the driver may be released. This is slightly safer. Signed-off-by:
-
Sakari Ailus authored
While there are issues related to object lifetime management, unregister the media device first when the driver is being unbound. This is slightly safer. Signed-off-by:
-
Sakari Ailus authored
The format fields in struct v4l2_format were otherwise documented but the meta field was missing. Document it. Reported-by:
-
Sakari Ailus authored
Patch ad608fbc changed how events were subscribed to address an issue elsewhere. As a side effect of that change, the "add" callback was called before the event subscription was added to the list of subscribed events, causing the first event queued by the add callback (and possibly other events arriving soon afterwards) to be lost. Fix this by adding the subscription to the list before calling the "add" callback, and clean up afterwards if that fails. Fixes: ad608fbc ("media: v4l: event: Prevent freeing event subscriptions while accessed") Reported-by:
Dave Stevenson <dave.stevenson@raspberrypi.org> Signed-off-by:
-
Mauro Carvalho Chehab authored
Shut up this warning: drivers/staging/media/davinci_vpfe/dm365_ipipeif.c: In function 'ipipeif_hw_setup': drivers/staging/media/davinci_vpfe/dm365_ipipeif.c:298:3: warning: this statement may fall through [-Wimplicit-fallthrough=] switch (isif_port_if) { ^~~~~~ drivers/staging/media/davinci_vpfe/dm365_ipipeif.c:314:2: note: here case IPIPEIF_SDRAM_YUV: ^~~~ By annotating a fall though case at the right place. Acked-by: -
Ezequiel Garcia authored
To be consistent with the rest of the mem2mem helpers, rename vb2_m2m_request_queue to v4l2_m2m_request_queue. This is just a cosmetic change. Signed-off-by:
Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Hans Verkuil authored
The "transmit queue full" message doesn't warrant debug level 1 since it is already clear from the error code what's going on. Bump to level 2. Signed-off-by:
-
Hans Verkuil authored
During the configuration phase of a CEC adapter it is trying to claim a free logical address by polling. However, the code doesn't check if there were errors other than OK or NACK, those are just treated as if the poll was NACKed. Instead check for such errors and retry the poll. And if the problem persists then don't claim this LA since there is something weird going on. Signed-off-by:
-
Hans Verkuil authored
Lower the minimum height to 360 to be consistent with the webcam input of vivid. The 480 was rather arbitrary but it made it harder to use vivid as a source for encoding since the default resolution when you load vivid is 640x360. Signed-off-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
-
Nathan Chancellor authored
Clang warns when a variable is assigned to itself. drivers/media/i2c/tc358743.c:1921:7: warning: explicitly assigning value of variable of type 'int' to itself [-Wself-assign] ret = ret; ~~~ ^ ~~~ 1 warning generated. Signed-off-by:Nathan Chancellor <natechancellor@gmail.com> Reviewed-by:
-
Mauro Carvalho Chehab authored
Linux 4.20-rc1 * tag 'v4.20-rc1': (836 commits) Linux 4.20-rc1 sched/topology: Fix off by one bug memory_hotplug: cond_resched in __remove_pages bfs: add sanity check at bfs_fill_super() kernel/sysctl.c: remove duplicated include kernel/kexec_file.c: remove some duplicated includes mm, thp: consolidate THP gfp handling into alloc_hugepage_direct_gfpmask ocfs2: fix clusters leak in ocfs2_defrag_extent() ocfs2: dlmglue: clean up timestamp handling ocfs2: don't put and assigning null to bh allocated outside ocfs2: fix a misuse a of brelse after failing ocfs2_check_dir_entry ocfs2: don't use iocb when EIOCBQUEUED returns ocfs2: without quota support, avoid calling quota recovery ocfs2: remove ocfs2_is_o2cb_active() mm: thp: relax __GFP_THISNODE for MADV_HUGEPAGE mappings include/linux/notifier.h: SRCU: fix ctags mm: handle no memcg case in memcg_kmem_charge() properly ARM: dts: stm32: update HASH1 dmas property on stm32mp157c ARM: orion: avoid VLA in orion_mpp_conf iov_iter: Fix 9p virtio breakage ...
-
Arnd Bergmann authored
We get a headers_check warning about the newly defined ioctl command structures: ./usr/include/linux/v4l2-controls.h:1105: found __[us]{8,16,32,64} type without #include <linux/types.h> This is resolved by including linux/types.h, as suggested by the warning, but there is another problem: Three of the four structures have an odd number of __u8 headers, but are aligned to 32 bit in the v4l2_ctrl_mpeg2_slice_params, so we get an implicit padding byte for each one. To solve that, let's add explicit padding that can be set to zero and verified in the kernel. Fixes: c27bb30e ("media: v4l: Add definitions for MPEG-2 slice format and metadata") Signed-off-by:Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
- 04 Nov, 2018 2 commits
-
-
Linus Torvalds authored
-
git://git.infradead.org/linux-ubifsLinus Torvalds authored
Pull UBIFS updates from Richard Weinberger: - Full filesystem authentication feature, UBIFS is now able to have the whole filesystem structure authenticated plus user data encrypted and authenticated. - Minor cleanups * tag 'tags/upstream-4.20-rc1' of git://git.infradead.org/linux-ubifs: (26 commits) ubifs: Remove unneeded semicolon Documentation: ubifs: Add authentication whitepaper ubifs: Enable authentication support ubifs: Do not update inode size in-place in authenticated mode ubifs: Add hashes and HMACs to default filesystem ubifs: authentication: Authenticate super block node ubifs: Create hash for default LPT ubfis: authentication: Authenticate master node ubifs: authentication: Authenticate LPT ubifs: Authenticate replayed journal ubifs: Add auth nodes to garbage collector journal head ubifs: Add authentication nodes to journal ubifs: authentication: Add hashes to index nodes ubifs: Add hashes to the tree node cache ubifs: Create functions to embed a HMAC in a node ubifs: Add helper functions for authentication support ubifs: Add separate functions to init/crc a node ubifs: Format changes for authentication support ubifs: Store read superblock node ubifs: Drop write_node ...
-
