There are some IP limit on rk3288 that only support 4 physical lanes
of 2.7/1.6 Gbps/lane, so seprate them out by device_type flag.
Tested-by: Caesar Wang <wxt@rock-chips.com>
Tested-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Yakir Yang <ykk@rock-chips.com>

RK3288 need some special registers setting, we can separate
them out by the dev_type of plat_data.
Tested-by: Caesar Wang <wxt@rock-chips.com>
Tested-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Yakir Yang <ykk@rock-chips.com>

Rockchip DP driver is a helper driver of analogix_dp coder driver,
so most of the DT property should be descriped in analogix_dp document.
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Yakir Yang <ykk@rock-chips.com>

Rockchip have three clocks for dp controller, we leave pclk_edp
to analogix_dp driver control, and keep the sclk_edp_24m and
sclk_edp in platform driver.
Acked-by: Mark Yao <mark.yao@rock-chips.com>
Tested-by: Caesar Wang <wxt@rock-chips.com>
Tested-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

After exynos_dp have been split the common IP code into analogix_dp driver,
the analogix_dp driver have deprecated some Samsung platform properties which
could be dynamically parsed from EDID/MODE/DPCD message, so this is an update
for Exynos DTS file for dp-controller.

Beside the backward compatibility is fully preserved, so there are no
bisectability break that make this change in a separate patch.
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Yakir Yang <ykk@rock-chips.com>

Analogix dp driver is split from exynos dp driver, so we just
make an copy of exynos_dp.txt, and then simplify exynos_dp.txt

Beside update some exynos dtsi file with the latest change
according to the devicetree binding documents.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Yakir Yang <ykk@rock-chips.com>

Both hsync/vsync polarity and interlace mode can be parsed from
drm display mode, and dynamic_range and ycbcr_coeff can be judge
by the video code.

But presumably Exynos still relies on the DT properties, so take
good use of mode_fixup() in to achieve the compatibility hacks.
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Tested-by: Caesar Wang <wxt@rock-chips.com>
Tested-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Yakir Yang <ykk@rock-chips.com>

link_rate and lane_count already configured in analogix_dp_set_link_train(),
so we don't need to config those repeatly after training finished, just
remove them out.

Beside Display Port 1.2 already support 5.4Gbps link rate, the maximum sets
would change from {1.62Gbps, 2.7Gbps} to {1.62Gbps, 2.7Gbps, 5.4Gbps}.
Tested-by: Caesar Wang <wxt@rock-chips.com>
Tested-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Yakir Yang <ykk@rock-chips.com>

Fix some obvious alignment problems, like alignment and line
over 80 characters problems, make this easy to be maintained
later.
Acked-by: Jingoo Han <jingoohan1@gmail.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Tested-by: Caesar Wang <wxt@rock-chips.com>
Tested-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Yakir Yang <ykk@rock-chips.com>

In the original split we kept the register constants intact to keep the

diff small. Still the constants are Analogix-specific, so rename them now.
Tested-by: Caesar Wang <wxt@rock-chips.com>
Tested-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Yakir Yang <ykk@rock-chips.com>

The core functionality now resides in the generic bridge part so the
exynos-specific implementation details can get a more suitable nameing.
Tested-by: Caesar Wang <wxt@rock-chips.com>
Tested-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Yakir Yang <ykk@rock-chips.com>

Split the dp core driver from exynos directory to bridge directory,
and rename the core driver to analogix_dp_*, rename the platform
code to exynos_dp.

Beside the new analogix_dp driver would export six hooks.
"analogix_dp_bind()" and "analogix_dp_unbind()"
"analogix_dp_suspned()" and "analogix_dp_resume()"
"analogix_dp_detect()" and "analogix_dp_get_modes()"

The bind/unbind symbols is used for analogix platform driver to connect
with analogix_dp core driver. And the detect/get_modes is used for analogix
platform driver to init the connector.

They reason why connector need register in helper driver is rockchip drm
haven't implement the atomic API, but Exynos drm have implement it, so
there would need two different connector helper functions, that's why we
leave the connector register in helper driver.
Acked-by: Inki Dae <inki.dae@samsung.com>
Tested-by: Caesar Wang <wxt@rock-chips.com>
Tested-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

some amd fixes
* 'drm-next-4.6' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon/mst: cleanup code indentation
  drm/radeon/mst: fix regression in lane/link handling.
  drm/amdgpu: add invalidate_page callback for userptrs
  drm/amdgpu: Revert "remove the userptr rmn->lock"
  drm/amdgpu: clean up path handling for powerplay
  drm/amd/powerplay: fix memory leak of tdp_table

Bunch of small fixupes all over. Plus a dma-buf patch that Sumit asked me
to cherry-pick since that's the only one he had in his tree.

There's a sparse issue outstanding in the color mgr stuff, but Lionel is
still working on something that actually appeases sparse.

* tag 'topic/drm-misc-2016-03-22' of git://anongit.freedesktop.org/drm-intel:
  dma-buf/fence: fix fence_is_later v2
  dma-buf: Update docs for SYNC ioctl
  drm: remove excess description
  dma-buf, drm, ion: Propagate error code from dma_buf_start_cpu_access()
  drm/atmel-hlcdc: use helper to get crtc state
  drm/atomic: use helper to get crtc state

This was all sorts of ugly from when I hacked it up,
just clean it up now and remove the extra indents.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The function this used changed in
    092c96a8
    drm/radeon: fix dp link rate selection (v2)

However for MST we should just always train to the
max link/rate. Though we probably need to limit this
for future hw, in theory radeon won't support it.

This fixes my 30" monitor with MST enabled.

Cc: stable@vger.kernel.org # v4.4
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Otherwise we can run into problems with the writeback code.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This reverts commit c02196834456f2d5fad334088b70e98ce4967c34.

In the meantime we moved get_user_pages() outside of the reservation lock,
so that shouldn't be an issue any more
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Use $(FULL_AMD_PATH) like everything else.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

tdp_table is being leaked on failed allocations of
hwmgr->dyn_state.cac_dtp_table. kfree tdp_table on the error
return path to fix the leak.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

A fence is never later than itself. This caused a bunch of overhead for AMDGPU.

v2: simplify check as suggested by Michel.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Just a bit of wording polish plus mentioning that it can fail and must
be restarted.

Requested by Sumit.

v2: Fix them typos (Hans).

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tiago Vignatti <tiago.vignatti@intel.com>
Cc: Stéphane Marchesin <marcheu@chromium.org>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Daniel Vetter <daniel.vetter@intel.com>
CC: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linaro-mm-sig@lists.linaro.org
Cc: intel-gfx@lists.freedesktop.org
Cc: devel@driverdev.osuosl.org
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Christian König <christian.koenig@amd.com.
Signed-off-by: Dave Airlie <airlied@redhat.com>

Description of expected_size doesn't match any parameter of the function
drm_atomic_replace_property_blob. Removing it.
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1458408156-15990-1-git-send-email-luisbg@osg.samsung.com

Drivers, especially i915.ko, can fail during the initial migration of a
dma-buf for CPU access. However, the error code from the driver was not
being propagated back to ioctl and so userspace was blissfully ignorant
of the failure. Rendering corruption ensues.

Whilst fixing the ioctl to return the error code from
dma_buf_start_cpu_access(), also do the same for
dma_buf_end_cpu_access().  For most drivers, dma_buf_end_cpu_access()
cannot fail. i915.ko however, as most drivers would, wants to avoid being
uninterruptible (as would be required to guarrantee no failure when
flushing the buffer to the device). As userspace already has to handle
errors from the SYNC_IOCTL, take advantage of this to be able to restart
the syscall across signals.

This fixes a coherency issue for i915.ko as well as reducing the
uninterruptible hold upon its BKL, the struct_mutex.

Fixes commit c11e391d
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Thu Feb 11 20:04:51 2016 -0200

    dma-buf: Add ioctls to allow userspace to flush

Testcase: igt/gem_concurrent_blit/*dmabuf*interruptible
Testcase: igt/prime_mmap_coherency/ioctl-errors
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tiago Vignatti <tiago.vignatti@intel.com>
Cc: Stéphane Marchesin <marcheu@chromium.org>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Daniel Vetter <daniel.vetter@intel.com>
CC: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linaro-mm-sig@lists.linaro.org
Cc: intel-gfx@lists.freedesktop.org
Cc: devel@driverdev.osuosl.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1458331359-2634-1-git-send-email-chris@chris-wilson.co.uk

A few other misc cleanups and bug fixes for 4.6.  Highlights:
- unify endian handling in powerplay
- powerplay fixes
- fix a regression in 4.5 on boards with no display connectors
- fence cleanups and locking fixes
- whitespace cleanups and code refactoring in radeon

* 'drm-next-4.6' of git://people.freedesktop.org/~agd5f/linux: (35 commits)
  drm/amdgpu/gfx7: add MTYPE definition
  drm/amdgpu: removing BO_VAs shouldn't be interruptible
  drm/amd/powerplay: show uvd/vce power gate enablement for tonga.
  drm/amd/powerplay: show uvd/vce power gate info for fiji
  drm/amdgpu: use sched fence if possible
  drm/amdgpu: move ib.fence to job.fence
  drm/amdgpu: give a fence param to ib_free
  drm/amdgpu: include the right version of gmc header files for iceland
  drm/radeon: fix indentation.
  drm/amd/powerplay: add uvd/vce dpm enabling flag to fix the performance issue for CZ
  drm/amdgpu: switch back to 32bit hw fences v2
  drm/amdgpu: remove amdgpu_fence_is_signaled
  drm/amdgpu: drop the extra fence range check v2
  drm/amdgpu: signal fences directly in amdgpu_fence_process
  drm/amdgpu: cleanup amdgpu_fence_wait_empty v2
  drm/amdgpu: keep all fences in an RCU protected array v2
  drm/amdgpu: add number of hardware submissions to amdgpu_fence_driver_init_ring
  drm/amdgpu: RCU protected amd_sched_fence_release
  drm/amdgpu: RCU protected amdgpu_fence_release
  drm/amdgpu: merge amdgpu_fence_process and _activity
  ...

Commit 8a2fa38f removed the mode_fixup because it was empty,
but 652353e6 modified it to call drm_mode_set_crtcinfo()
instead.

Both commits are correct, but the merge of the two kept the nonempty
version without the reference to it, as shown by the gcc warning:

 drm/sti/sti_crtc.c:54:13: error: 'sti_crtc_mode_fixup' defined but not used

This restores the callback pointer to fix the merge.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reverts: 8a2fa38f ("drm/sti: removed optional dummy crtc mode_fixup function.")
Fixes: 652353e6 ("drm/sti: set CRTC modesetting parameters")
Fixes: cf481068 ("Merge branch '2016-02-26-st-drm-next' of http://git.linaro.org/people/benjamin.gaignard/kernel into drm-next")
Acked-by: Vincent ABRIOU <vincent.abriou@st.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Signed-off-by: Flora Cui <Flora.Cui@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

when preemption feature lands, the SA bo should rely on sched
fence, because hw fence will be invalid after its job preempted
or skipped.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

thus amdgpu_ib_free() can hook sched fence to SA manager
in later patches.

BTW:
for amdgpu_free_job(), it should only fence_put() the
fence of the last ib once, so fix it as well in this patch.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Ken Wang <Qingqing.Wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Merge branch '2016-02-26-st-drm-next' of http://git.linaro.org/people/benjamin.gaignard/kernel into drm-next

Here are sti patches for drm-next.
It brings:
  - The support of the atomic_check for the planes and minor fixes for
planes
  - The support of the vendor specific infoframe for HDMI and the
support of 2 HDMI properties related to the connector
  - The support of the DVO solving panel detection issue and timing issue.
  - The support of debugfs for connectors, encoders, crtcs and planes.

* '2016-02-26-st-drm-next' of http://git.linaro.org/people/benjamin.gaignard/kernel: (36 commits)
  drm/sti: use u32 to store DMA addresses
  drm: sti: remove sti_gem_prime_export hack
  drm/sti: add debugfs fps_show/fps_get mechanism for planes
  drm/sti: add debugfs entries for TVOUT encoders
  drm/sti: add debugfs entries for MIXER crtc
  drm/sti: add debugfs entries for VID plane
  drm/sti: add debugfs entries for HQVDP plane
  drm/sti: add debugfs entries for GDP planes
  drm/sti: add debugfs entries for CURSOR plane
  drm/sti: add debugfs entries for HDA connector
  drm/sti: add debugfs entries for DVO connector
  drm/sti: add debugfs entries for HDMI connector
  drm/sti: add hdmi_mode property for HDMI connector
  drm/sti: add colorspace property to the HDMI connector
  drm/sti: add HDMI vendor specific infoframe
  drm/sti: reset infoframe transmission when HDMI is stopped
  drm/sti: HDMI infoframe transmission mode not take into account
  drm/sti: reset HD DACS when HDA connector is created
  drm/sti: fix dvo data_enable signal
  drm/sti: adjust delay for DVO
  ...

A few more fixes and cleanups for 4.6:
- DCE code cleanups
- HDP flush/invalidation fixes
- GPUVM fixes
- switch to drm_vblank_[on|off]
- PX fixes
- misc bug fixes

* 'drm-next-4.6' of git://people.freedesktop.org/~agd5f/linux: (50 commits)
  drm/amdgpu: split pipeline sync out of SDMA vm_flush() as well
  drm/amdgpu: Revert "add mutex for ba_va->valids/invalids"
  drm/amdgpu: Revert "add lock for interval tree in vm"
  drm/amdgpu: Revert "add spin lock to protect freed list in vm (v3)"
  drm/amdgpu: reserve the PD during unmap and remove
  drm/amdgpu: Fix two bugs in amdgpu_vm_bo_split_mapping
  drm/radeon: Don't drop DP 2.7 Ghz link setup on some cards.
  MAINTAINERS: update radeon entry to include amdgpu as well
  drm/amdgpu: disable runtime pm on PX laptops without dGPU power control
  drm/radeon: disable runtime pm on PX laptops without dGPU power control
  drm/amd/amdgpu: Fix indentation in do_set_base() (DCEv8)
  drm/amd/amdgpu: make afmt_init cleanup if alloc fails (DCEv8)
  drm/amd/amdgpu: Move config init flag to bottom of sw_init (DCEv8)
  drm/amd/amdgpu: Don't proceed into audio_fini if audio is disabled (DCEv8)
  drm/amd/amdgpu: Fix identation in do_set_base() (DCEv10)
  drm/amd/amdgpu: Make afmt_init cleanup if alloc fails (DCEv10)
  drm/amd/amdgpu: Move initialized flag to bottom of sw_init (DCEv10)
  drm/amd/amdgpu: Don't proceed in audio_fini if disabled (DCEv10)
  drm/amd/amdgpu: Fix indentation in dce_v11_0_crtc_do_set_base()
  drm/amd/amdgpu: Make afmt_init() cleanup if alloc fails (DCEv11)
  ...

Pull request of 2016-03-16

* tag 'vmwgfx-next-160316' of git://people.freedesktop.org/~thomash/linux:
  drm/vmwgfx: Bump driver minor
  drm/vmwgfx: Allow the UPDATE_LAYOUT ioctl from control nodes
  drm/vmwgfx: Send a hotplug event at master_set
  drm/vmwgfx: Default to explicit crtc placement for screen targets and screen objects
  drm/vmwgfx: Calculate the cursor position based on the crtc gui origin
  drm/vmwgfx: Add connector properties to switch between explicit and implicit placement
  drm/vmwgfx: Add suggested screen x and y connector properties
  drm/vmwgfx: Add implicit framebuffer checks to the screen target code
  drm/vmwgfx: Break out implicit fb code
  drm/vmwgfx: Rework screen target page flips v2
  drm/vmwgfx: Fix screen object page flips for large framebuffers
  drm/vmwgfx: Fix a screen object framebuffer dirty corner case
  drm/vmwgfx: Add DXGenMips support

Merge tag 'drm-intel-next-fixes-2016-03-16' of http://anongit.freedesktop.org/git/drm-intel into drm-next

* tag 'drm-intel-next-fixes-2016-03-16' of http://anongit.freedesktop.org/git/drm-intel:
  drm/i915: Handle -EDEADLK in drm_atomic_commit from load-detect.

drm/panel: Changes for v4.6-rc1

This contains a refactoring of parts of the DSI core to allow creating
DSI devices from non-DSI control busses (i.e. I2C, SPI, ...).

Other than that there's support for a couple of new panels as well as
a few cleanup patches.

* tag 'drm/panel/for-4.6-rc1' of http://anongit.freedesktop.org/git/tegra/linux:
  drm/bridge: Make (pre/post) enable/disable callbacks optional
  drm/panel: simple: Add URT UMSH-8596MD-xT panels support
  dt-bindings: Add URT UMSH-8596MD-xT panel bindings
  of: Add United Radiant Technology Corporation vendor prefix
  drm/panel: simple: Support for LG lp120up1 panel
  dt-bindings: Add LG lp120up1 panel bindings
  drm/panel: simple: Fix g121x1_l03 hsync/vsync polarity
  drm/dsi: Get DSI host by DT device node
  drm/dsi: Add routine to unregister a DSI device
  drm/dsi: Try to match non-DT DSI devices
  drm/dsi: Use mipi_dsi_device_register_full() for DSI device creation
  drm/dsi: Check for CONFIG_OF when defining of_mipi_dsi_device_add()