- 14 Oct, 2011 5 commits
-
-
Heiko Stuebner authored
The S3C2416/2450 has only 3 bits for the armdiv setting instead of the 4 bits of the S3C2443. Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
Kukjin Kim <kgene.kim@samsung.com>
-
Sylwester Nawrocki authored
Add voltage regulator and platform data definition for M-5MOLS sensor and MIPI-CSI receiver drivers. Add CAM power domain dependencies for FIMC device and set up camera port A GPIO. Configure I2C0 bus timings. Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
HeungJun Kim <riverful.kim@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
-
Sachin Kamat authored
This patch enables multi-format codec (MFC) support on ORIGEN board. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by:
-
Heiko Stuebner authored
The ADC of the S3C2416/2450 SoC is 10 or 12 bit wide, has its source selection in the register base+0x18 and its width selection in bit 03 of the ADCCON register. Signed-off-by:
-
Heiko Stuebner authored
The S3C2443-adc is 10 bit wide and has its mux-select in an extra register at base+0x18 Signed-off-by:
-
- 12 Oct, 2011 11 commits
-
-
Heiko Stuebner authored
The adc blocks of S3C2443 and S3C2416 contain quirks not present in the stock S3C24xx adc. Therefore allow them to alter the device name via s3c_adc_setname. Signed-off-by:
-
Heiko Stuebner authored
The mux bits in the adccon register should be cleared only if muxing is really done in ADCCON and not another register. This patch introduces a conditional for this. Signed-off-by:
-
Heiko Stuebner authored
The adc blocks of the S3C2443 and S3C2416 define some additional registers and bits. Signed-off-by:
-
Tushar Behera authored
In drivers/gpio/gpio-samsung.c, there are certain structures and functions which are not getting used if the particular CPU is not selected. These code segments are moved under CPU specific macros to remove compilation warnings. Signed-off-by:
Tushar Behera <tushar.behera@linaro.org> Acked-by:
Grant Likely <grant.likely@secretlab.ca> Signed-off-by:
-
Thomas Abraham authored
Some of the gpio chips of exynos4 are assigned a default gpio config without the exynos4 specific pull up/down callbacks which resulted in incorrect setting of pull up/down configuration. Fix this by adding two new exynos4 specific entries in the array of default configs with set_pull and get_pull callbacks set to exynos4 specific callbacks The new default gpio configs can then be used for exynos4 gpio chips. Signed-off-by:
Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by:
-
Mark Brown authored
The S3C64xx CPUs have TCMs so enable the kernel support for it on these systems. Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Peter Korsgaard authored
Only register gpio banks provided by SoC instead of the maximum possible to lessen confusion, get rid of a warning from gpiolib and stop it from eating into the extra gpios for configs with S3C24XX_GPIO_EXTRA != 0. Signed-off-by:
Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by:
-
Peter Korsgaard authored
S3C_GPIO_SPACE cannont be NON-zero, not zero. Signed-off-by:
-
Kukjin Kim authored
The 'nuri_cm_devices' is defined but not used. Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: -
Sachin Kamat authored
This patch registers all the available power domains on ORIGEN board. Signed-off-by:
-
Sachin Kamat authored
Since the DC5V line is connected directly to the HDMI connector, "hdmi-en" regulator would become a dummy regulator on origen board (by defining REGULATOR_DUMMY in the kernel config file). Signed-off-by:
-
- 04 Oct, 2011 24 commits
-
-
Abhilash Kesavan authored
Add suspend-to-ram support for SMDK6440/50 Signed-off-by:
Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by:
-
Abhilash Kesavan authored
The sleep code for S5PV210 and EXYNOS4 are identical; moreover S5p64X0 and S5PC100 for which support will be added soon can use the same procedure. Create a common sleep code in the plat-s5p directory so that it can be re-used. Signed-off-by:
-
Abhilash Kesavan authored
Pave the way for adding PM support on S5P64X0, which is more similar to the S3C64XX series than the S5P series. Hence, the common pm code (containing dummy functions) should not be used for S5P64X0. Signed-off-by:
-
Kukjin Kim authored
-
Kukjin Kim authored
Conflicts: arch/arm/plat-s5p/include/plat/pll.h
-
Kukjin Kim authored
Conflicts: arch/arm/mach-exynos4/clock.c arch/arm/mach-s3c2412/gpio.c arch/arm/mach-s5p64x0/dma.c arch/arm/mach-s5p64x0/gpiolib.c
-
Kukjin Kim authored
-
Kukjin Kim authored
-
Kukjin Kim authored
This patch moves header files from plat-s5p to plat-samsung to remove plat-s5p directory to make one plat-samsung directory for Samsung SoCs. Signed-off-by: -
Kukjin Kim authored
This patch moves header files from plat-s3c24xx to plat-samsung to remove plat-s3c24xx directory to make one plat-samsung directory for Samsung SoCs. And this patch includes fixing coding style, too. Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: -
Kukjin Kim authored
This patch moves SoC header files for supporting each SoCs to plat-samsung directory. This is required to make one plat- directory for Samsung SoCs. Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: -
Kukjin Kim authored
Removed - arch/arm/plat-s3c24xx/include/plat/pll.h - arch/arm/mach-s3c64xx/include/mach/pll.h - arch/arm/plat-s5p/include/plat/pll.h - arch/arm/plat-samsung/include/plat/pll6553x.h And created - arch/arm/plat-samsung/include/plat/pll.h Cc: Ben Dooks <ben-linux@fluff.org> [kgene.kim@samsung.com: changed title] [kgene.kim@samsung.com: fixed conflicts in plat-s5p/include/pll.h] Signed-off-by: -
Kukjin Kim authored
Removed - arch/arm/plat-s3c24xx/include/mach/pwm-clock.h - arch/arm/mach-s3c64xx/include/mach/pwm-clock.h - arch/arm/mach-s5p64x0/include/mach/pwm-clock.h - arch/arm/mach-s5pc100/include/mach/pwm-clock.h - arch/arm/mach-s5pv210/include/mach/pwm-clock.h - arch/arm/mach-exynos4/include/mach/pwm-clock.h And created - arch/arm/plat-samsung/include/plat/pwm-clock.h Cc: Ben Dooks <ben-linux@fluff.org> [kgene.kim@samsung.com: changed title] Signed-off-by: -
Kukjin Kim authored
According to commit a3831cf ("ARM: Consolidate the clkdev header files"), current mach/clkdev.h is no needed in Samsung stuff. Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: -
Thomas Abraham authored
The sdhci platform helper function that sets up the default controller configuration is removed for all Samsung platforms since such default controller configuration can be handled by the driver. Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by:
-
Sachin Kamat authored
This patch adds definitions to enable support for s5p-fimc driver on SMDKV310 board. Signed-off-by:
-
Sachin Kamat authored
This patch adds header file protection macros to prevent duplication. Signed-off-by:
-
Jingoo Han authored
This patch is to support usb ehci device to the SMDKV310 board. Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
-
Heiko Stuebner authored
This clock is common to S3C2443/2416/2450. Signed-off-by:
-
Heiko Stuebner authored
This clock is special to the S3C2416/2450 SoCs. Signed-off-by:
-
Heiko Stuebner authored
It's the same clock for 2443/2416/2450. Signed-off-by:
-
Heiko Stuebner authored
S3C2416/S3C2450 use the same clocks for their i2s blocks and can therefore reuse the existing ones. Signed-off-by:
-
Ajay Kumar authored
This patch: -- Adds platform device support for LCD-LTE480. -- Adds platform data for FB with win_mode and default_bpp. -- Enables FB device support and platform-lcd support. -- Adds SPCON settings for LCD. Signed-off-by:
Ajay Kumar <ajaykumar.rs@samsung.com> Signed-off-by:
-
Ajay Kumar authored
This patch: -- Adds platform device support for LCD-LTE480. -- Adds platform data for FB with win_mode and default_bpp. -- Enables FB device support and platform-lcd support. -- Adds SPCON settings for LCD. Signed-off-by:
-
