- 06 Jul, 2020 14 commits
-
-
Yafang Shao authored
Remove current_pid(), current_test_flags() and current_clear_flags_nested(), because they are useless. Signed-off-by:
Yafang Shao <laoar.shao@gmail.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
-
Dave Chinner authored
The page faultround path ->map_pages is implemented in XFS via filemap_map_pages(). This function checks that pages found in page cache lookups have not raced with truncate based invalidation by checking page->mapping is correct and page->index is within EOF. However, we've known for a long time that this is not sufficient to protect against races with invalidations done by operations that do not change EOF. e.g. hole punching and other fallocate() based direct extent manipulations. The way we protect against these races is we wrap the page fault operations in a XFS_MMAPLOCK_SHARED lock so they serialise against fallocate and truncate before calling into the filemap function that processes the fault. Do the same for XFS's ->map_pages implementation to close this potential data corruption issue. Signed-off-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
Amir Goldstein <amir73il@gmail.com> Reviewed-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
-
Darrick J. Wong authored
Move the double-inode locking helpers to xfs_inode.c since they're not specific to reflink. Signed-off-by:
-
Darrick J. Wong authored
Refactor the two functions that we use to lock and unlock two inodes to block userspace from initiating IO against a file, whether via system calls or mmap activity. Signed-off-by:
-
Darrick J. Wong authored
Fix the return value of xfs_reflink_remap_prep so that its return value conventions match the rest of xfs. Signed-off-by:
-
Darrick J. Wong authored
If the source and destination map are identical, we can skip the remap step to save some time. Signed-off-by:
-
Darrick J. Wong authored
When logging quota block count updates during a reflink operation, we only log the /delta/ of the block count changes to the dquot. Since we now know ahead of time the extent type of both dmap and smap (and that they have the same length), we know that we only need to reserve quota blocks for dmap's blockcount if we're mapping it into a hole. Signed-off-by:
-
Darrick J. Wong authored
Now that we've reworked xfs_reflink_remap_extent to remap only one extent per transaction, we actually know if the extent being removed is an allocated mapping. This means that we now know ahead of time if we're going to be touching the data fork. Since we only need blocks for a bmbt split if we're going to update the data fork, we only need to get quota reservation if we know we're going to touch the data fork. Signed-off-by:
-
Darrick J. Wong authored
The existing reflink remapping loop has some structural problems that need addressing: The biggest problem is that we create one transaction for each extent in the source file without accounting for the number of mappings there are for the same range in the destination file. In other words, we don't know the number of remap operations that will be necessary and we therefore cannot guess the block reservation required. On highly fragmented filesystems (e.g. ones with active dedupe) we guess wrong, run out of block reservation, and fail. The second problem is that we don't actually use the bmap intents to their full potential -- instead of calling bunmapi directly and having to deal with its backwards operation, we could call the deferred ops xfs_bmap_unmap_extent and xfs_refcount_decrease_extent instead. This makes the frontend loop much simpler. Solve all of these problems by refactoring the remapping loops so that we only perform one remapping operation per transaction, and each operation only tries to remap a single extent from source to dest. Signed-off-by:
Edwin Török <edwin@etorok.net> Tested-by:
-
Darrick J. Wong authored
The name of this predicate is a little misleading -- it decides if the extent mapping is allocated and written. Change the name to be more direct, as we're going to add a new predicate in the next patch. Signed-off-by:
-
Darrick J. Wong authored
Quota reservations are supposed to account for the blocks that might be allocated due to a bmap btree split. Reflink doesn't do this, so fix this to make the quota accounting more accurate before we start rearranging things. Fixes: 862bb360 ("xfs: reflink extents from one file to another") Signed-off-by:
-
Darrick J. Wong authored
The data fork scrubber calls filemap_write_and_wait to flush dirty pages and delalloc reservations out to disk prior to checking the data fork's extent mappings. Unfortunately, this means that scrub can consume the EIO/ENOSPC errors that would otherwise have stayed around in the address space until (we hope) the writer application calls fsync to persist data and collect errors. The end result is that programs that wrote to a file might never see the error code and proceed as if nothing were wrong. xfs_scrub is not in a position to notify file writers about the writeback failure, and it's only here to check metadata, not file contents. Therefore, if writeback fails, we should stuff the error code back into the address space so that an fsync by the writer application can pick that up. Fixes: 99d9d8d0 ("xfs: scrub inode block mappings") Signed-off-by:
-
Brian Foster authored
The rmapbt extent swap algorithm remaps individual extents between the source inode and the target to trigger reverse mapping metadata updates. If either inode straddles a format or other bmap allocation boundary, the individual unmap and map cycles can trigger repeated bmap block allocations and frees as the extent count bounces back and forth across the boundary. While net block usage is bound across the swap operation, this behavior can prematurely exhaust the transaction block reservation because it continuously drains as the transaction rolls. Each allocation accounts against the reservation and each free returns to global free space on transaction roll. The previous workaround to this problem attempted to detect this boundary condition and provide surplus block reservation to acommodate it. This is insufficient because more remaps can occur than implied by the extent counts; if start offset boundaries are not aligned between the two inodes, for example. To address this problem more generically and dynamically, add a transaction accounting mode that returns freed blocks to the transaction reservation instead of the superblock counters on transaction roll and use it when the rmapbt based algorithm is active. This allows the chain of remap transactions to preserve the block reservation based own its own frees and prevent premature exhaustion regardless of the remap pattern. Note that this is only safe for superblocks with lazy sb accounting, but the latter is required for v5 supers and the rmap feature depends on v5. Fixes: b3fed434 ("xfs: account format bouncing into rmapbt swapext tx reservation") Root-caused-by:
-
Keyur Patel authored
./xfs/libxfs/xfs_inode_buf.c:56: unnecssary ==> unnecessary ./xfs/libxfs/xfs_inode_buf.c:59: behavour ==> behaviour ./xfs/libxfs/xfs_inode_buf.c:206: unitialized ==> uninitialized Signed-off-by:
Keyur Patel <iamkeyur96@gmail.com> Reviewed-by:
-
- 05 Jul, 2020 14 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Using a mutex for "print this warning only once" is so overdesigned as to be actively offensive to my sensitive stomach. Just use "pr_info_once()" that already does this, although in a (harmlessly) racy manner that can in theory cause the message to be printed twice if more than one CPU races on that "is this the first time" test. [ If somebody really cares about that harmless data race (which sounds very unlikely indeed), that person can trivially fix printk_once() by using a simple atomic access, preferably with an optimistic non-atomic test first before even bothering to treat the pointless "make sure it is _really_ just once" case. A mutex is most definitely never the right primitive to use for something like this. ] Yes, this is a small and meaningless detail in a code path that hardly matters. But let's keep some code quality standards here, and not accept outrageously bad code. Link: https://lore.kernel.org/lkml/CAHk-=wgV9toS7GU3KmNpj8hCS9SeF+A0voHS8F275_mgLhL4Lw@mail.gmail.com/ Cc: Andy Lutomirski <luto@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "A series of fixes for x86: - Reset MXCSR in kernel_fpu_begin() to prevent using a stale user space value. - Prevent writing MSR_TEST_CTRL on CPUs which are not explicitly whitelisted for split lock detection. Some CPUs which do not support it crash even when the MSR is written to 0 which is the default value. - Fix the XEN PV fallout of the entry code rework - Fix the 32bit fallout of the entry code rework - Add more selftests to ensure that these entry problems don't come back. - Disable 16 bit segments on XEN PV. It's not supported because XEN PV does not implement ESPFIX64" * tag 'x86-urgent-2020-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/ldt: Disable 16-bit segments on Xen PV x86/entry/32: Fix #MC and #DB wiring on x86_32 x86/entry/xen: Route #DB correctly on Xen PV x86/entry, selftests: Further improve user entry sanity checks x86/entry/compat: Clear RAX high bits on Xen PV SYSENTER selftests/x86: Consolidate and fix get/set_eflags() helpers selftests/x86/syscall_nt: Clear weird flags after each test selftests/x86/syscall_nt: Add more flag combinations x86/entry/64/compat: Fix Xen PV SYSENTER frame setup x86/entry: Move SYSENTER's regs->sp and regs->flags fixups into C x86/entry: Assert that syscalls are on the right stack x86/split_lock: Don't write MSR_TEST_CTRL on CPUs that aren't whitelisted x86/fpu: Reset MXCSR to default in kernel_fpu_begin() -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Thomas Gleixner: "A set of interrupt chip driver fixes: - Ensure the atomicity of affinity updates in the GIC driver - Don't try to sleep in atomic context when waiting for the GICv4.1 to respond. Use polling instead. - Typo fixes in Kconfig and warnings" * tag 'irq-urgent-2020-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic: Atomically update affinity irqchip/riscv-intc: Fix a typo in a pr_warn() irqchip/gic-v4.1: Use readx_poll_timeout_atomic() to fix sleep in atomic irqchip/loongson-pci-msi: Fix a typo in Kconfig -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull rcu fixlet from Thomas Gleixner: "A single fix for a printk format warning in RCU" * tag 'core-urgent-2020-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rcuperf: Fix printk format warning
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes frin Masahiro Yamada: - fix various bugs in xconfig - fix some issues in cross-compilation using Clang - fix documentation * tag 'kbuild-fixes-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: .gitignore: Do not track `defconfig` from `make savedefconfig` kbuild: make Clang build userprogs for target architecture kbuild: fix CONFIG_CC_CAN_LINK(_STATIC) for cross-compilation with Clang kconfig: qconf: parse newer types at debug info kconfig: qconf: navigate menus on hyperlinks kconfig: qconf: don't show goback button on splitMode kconfig: qconf: simplify the goBack() logic kconfig: qconf: re-implement setSelected() kconfig: qconf: make debug links work again kconfig: qconf: make search fully work again on split mode kconfig: qconf: cleanup includes docs: kbuild: fix ReST formatting gcc-plugins: fix gcc-plugins directory path in documentation
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Four small fixes in three drivers. The mptfusion one has actually caused user visible issues in certain kernel configurations" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: mptfusion: Don't use GFP_ATOMIC for larger DMA allocations scsi: libfc: Skip additional kref updating work event scsi: libfc: Handling of extra kref scsi: qla2xxx: Fix a condition in qla2x00_find_all_fabric_devs()
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: - NVMe fixes from Christoph: - Fix crash in multi-path disk add (Christoph) - Fix ignore of identify error (Sagi) - Fix a compiler complaint that a function should be static (Wei) * tag 'block-5.8-2020-07-05' of git://git.kernel.dk/linux-block: block: make function __bio_integrity_free() static nvme: fix a crash in nvme_mpath_add_disk nvme: fix identify error status silent ignore -
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fix from Jens Axboe: "Andres reported a regression with the fix that was merged earlier this week, where his setup of using signals to interrupt io_uring CQ waits no longer worked correctly. Fix this, and also limit our use of TWA_SIGNAL to the case where we need it, and continue using TWA_RESUME for task_work as before. Since the original is marked for 5.7 stable, let's flush this one out early" * tag 'io_uring-5.8-2020-07-05' of git://git.kernel.dk/linux-block: io_uring: fix regression with always ignoring signals in io_cqring_wait()
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "The usual driver fixes and documentation updates" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: mlxcpld: check correct size of maximum RECV_LEN packet i2c: add Kconfig help text for slave mode i2c: slave-eeprom: update documentation i2c: eg20t: Load module automatically if ID matches i2c: designware: platdrv: Set class based on DMI i2c: algo-pca: Add 0x78 as SCL stuck low status for PCA9665
-
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds authored
Pull MIPS fixes from Thomas Bogendoerfer: - fix for missing hazard barrier - DT fix for ingenic - DT fix of GPHY names for lantiq - fix usage of smp_processor_id() while preemption is enabled * tag 'mips_fixes_5.8_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: Do not use smp_processor_id() in preemptible code MIPS: Add missing EHB in mtc0 -> mfc0 sequence for DSPen MIPS: ingenic: gcw0: Fix HP detection GPIO. MIPS: lantiq: xway: sysctrl: fix the GPHY clock alias names
-
Xingxing Su authored
Use preempt_disable() to fix the following bug under CONFIG_DEBUG_PREEMPT. [ 21.915305] BUG: using smp_processor_id() in preemptible [00000000] code: qemu-system-mip/1056 [ 21.923996] caller is do_ri+0x1d4/0x690 [ 21.927921] CPU: 0 PID: 1056 Comm: qemu-system-mip Not tainted 5.8.0-rc2 #3 [ 21.934913] Stack : 0000000000000001 ffffffff81370000 ffffffff8071cd60 a80f926d5ac95694 [ 21.942984] a80f926d5ac95694 0000000000000000 98000007f0043c88 ffffffff80f2fe40 [ 21.951054] 0000000000000000 0000000000000000 0000000000000001 0000000000000000 [ 21.959123] ffffffff802d60cc 98000007f0043dd8 ffffffff81f4b1e8 ffffffff81f60000 [ 21.967192] ffffffff81f60000 ffffffff80fe0000 ffff000000000000 0000000000000000 [ 21.975261] fffffffff500cce1 0000000000000001 0000000000000002 0000000000000000 [ 21.983331] ffffffff80fe1a40 0000000000000006 ffffffff8077f940 0000000000000000 [ 21.991401] ffffffff81460000 98000007f0040000 98000007f0043c80 000000fffba8cf20 [ 21.999471] ffffffff8071cd60 0000000000000000 0000000000000000 0000000000000000 [ 22.007541] 0000000000000000 0000000000000000 ffffffff80212ab4 a80f926d5ac95694 [ 22.015610] ... [ 22.018086] Call Trace: [ 22.020562] [<ffffffff80212ab4>] show_stack+0xa4/0x138 [ 22.025732] [<ffffffff8071cd60>] dump_stack+0xf0/0x150 [ 22.030903] [<ffffffff80c73f5c>] check_preemption_disabled+0xf4/0x100 [ 22.037375] [<ffffffff80213b84>] do_ri+0x1d4/0x690 [ 22.042198] [<ffffffff8020b828>] handle_ri_int+0x44/0x5c [ 24.359386] BUG: using smp_processor_id() in preemptible [00000000] code: qemu-system-mip/1072 [ 24.368204] caller is do_ri+0x1a8/0x690 [ 24.372169] CPU: 4 PID: 1072 Comm: qemu-system-mip Not tainted 5.8.0-rc2 #3 [ 24.379170] Stack : 0000000000000001 ffffffff81370000 ffffffff8071cd60 a80f926d5ac95694 [ 24.387246] a80f926d5ac95694 0000000000000000 98001007ef06bc88 ffffffff80f2fe40 [ 24.395318] 0000000000000000 0000000000000000 0000000000000001 0000000000000000 [ 24.403389] ffffffff802d60cc 98001007ef06bdd8 ffffffff81f4b818 ffffffff81f60000 [ 24.411461] ffffffff81f60000 ffffffff80fe0000 ffff000000000000 0000000000000000 [ 24.419533] fffffffff500cce1 0000000000000001 0000000000000002 0000000000000000 [ 24.427603] ffffffff80fe0000 0000000000000006 ffffffff8077f940 0000000000000020 [ 24.435673] ffffffff81460020 98001007ef068000 98001007ef06bc80 000000fffbbbb370 [ 24.443745] ffffffff8071cd60 0000000000000000 0000000000000000 0000000000000000 [ 24.451816] 0000000000000000 0000000000000000 ffffffff80212ab4 a80f926d5ac95694 [ 24.459887] ... [ 24.462367] Call Trace: [ 24.464846] [<ffffffff80212ab4>] show_stack+0xa4/0x138 [ 24.470029] [<ffffffff8071cd60>] dump_stack+0xf0/0x150 [ 24.475208] [<ffffffff80c73f5c>] check_preemption_disabled+0xf4/0x100 [ 24.481682] [<ffffffff80213b58>] do_ri+0x1a8/0x690 [ 24.486509] [<ffffffff8020b828>] handle_ri_int+0x44/0x5c Signed-off-by:
Xingxing Su <suxingxing@loongson.cn> Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Hauke Mehrtens authored
This resolves the hazard between the mtc0 in the change_c0_status() and the mfc0 in configure_exception_vector(). Without resolving this hazard configure_exception_vector() could read an old value and would restore this old value again. This would revert the changes change_c0_status() did. I checked this by printing out the read_c0_status() at the end of per_cpu_trap_init() and the ST0_MX is not set without this patch. The hazard is documented in the MIPS Architecture Reference Manual Vol. III: MIPS32/microMIPS32 Privileged Resource Architecture (MD00088), rev 6.03 table 8.1 which includes: Producer | Consumer | Hazard ----------|----------|---------------------------- mtc0 | mfc0 | any coprocessor 0 register I saw this hazard on an Atheros AR9344 rev 2 SoC with a MIPS 74Kc CPU. There the change_c0_status() function would activate the DSPen by setting ST0_MX in the c0_status register. This was reverted and then the system got a DSP exception when the DSP registers were saved in save_dsp() in the first process switch. The crash looks like this: [ 0.089999] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.097796] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.107070] Kernel panic - not syncing: Unexpected DSP exception [ 0.113470] Rebooting in 1 seconds.. We saw this problem in OpenWrt only on the MIPS 74Kc based Atheros SoCs, not on the 24Kc based SoCs. We only saw it with kernel 5.4 not with kernel 4.19, in addition we had to use GCC 8.4 or 9.X, with GCC 8.3 it did not happen. In the kernel I bisected this problem to commit 9012d011 ("compiler: allow all arches to enable CONFIG_OPTIMIZE_INLINING"), but when this was reverted it also happened after commit 172dcd93 ("MIPS: Always allocate exception vector for MIPSr2+"). Commit 0b24cae4 ("MIPS: Add missing EHB in mtc0 -> mfc0 sequence.") does similar changes to a different file. I am not sure if there are more places affected by this problem. Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Paul Menzel authored
Running `make savedefconfig` creates by default `defconfig`, which is, currently, on git’s radar, for example, `git status` lists this file as untracked. So, add the file to `.gitignore`, so it’s ignored by git. Signed-off-by:
Paul Menzel <pmenzel@molgen.mpg.de> Acked-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org>
-
- 04 Jul, 2020 12 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: "One fix for a regression in our pkey handling, which exhibits as PROT_EXEC mappings taking continuous page faults. Thanks to: Jan Stancek, Aneesh Kumar K.V" * tag 'powerpc-5.8-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/mm/pkeys: Make pkey access check work on execute_only_key
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Will Deacon: "Nothing earth-shattering, really - some CPU errata workarounds (one day they'll get it right, ha!) and a fix for a boot failure with very large kernel images where the alternative patching gets confused when patching relative branches using veneers. - Fix alternative patching for very large kernel images and modules - Hook up existing CPU errata workarounds for Qualcomm Kryo CPUs" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: Add KRYO4XX silver CPU cores to erratum list 1530923 and 1024718 arm64: Add KRYO4XX gold CPU cores to erratum list 1463225 and 1418040 arm64: Add MIDR value for KRYO4XX gold CPU cores arm64/alternatives: use subsections for replacement sequences
-
Jens Axboe authored
When switching to TWA_SIGNAL for task_work notifications, we also made any signal based condition in io_cqring_wait() return -ERESTARTSYS. This breaks applications that rely on using signals to abort someone waiting for events. Check if we have a signal pending because of queued task_work, and repeat the signal check once we've run the task_work. This provides a reliable way of telling the two apart. Additionally, only use TWA_SIGNAL if we are using an eventfd. If not, we don't have the dependency situation described in the original commit, and we can get by with just using TWA_RESUME like we previously did. Fixes: ce593a6c ("io_uring: use signal based task_work running") Cc: stable@vger.kernel.org # v5.7 Reported-by:
Andres Freund <andres@anarazel.de> Tested-by:
Jens Axboe <axboe@kernel.dk>
-
Andy Lutomirski authored
Xen PV doesn't implement ESPFIX64, so they don't work right. Disable them. Also print a warning the first time anyone tries to use a 16-bit segment on a Xen PV guest that would otherwise allow it to help people diagnose this change in behavior. This gets us closer to having all x86 selftests pass on Xen PV. Signed-off-by:
Andy Lutomirski <luto@kernel.org> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/92b2975459dfe5929ecf34c3896ad920bd9e3f2d.1593795633.git.luto@kernel.org
-
Andy Lutomirski authored
DEFINE_IDTENTRY_MCE and DEFINE_IDTENTRY_DEBUG were wired up as non-RAW on x86_32, but the code expected them to be RAW. Get rid of all the macro indirection for them on 32-bit and just use DECLARE_IDTENTRY_RAW and DEFINE_IDTENTRY_RAW directly. Also add a warning to make sure that we only hit the _kernel paths in kernel mode. Reported-by:
Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by:
-
Andy Lutomirski authored
On Xen PV, #DB doesn't use IST. It still needs to be correctly routed depending on whether it came from user or kernel mode. Get rid of DECLARE/DEFINE_IDTENTRY_XEN -- it was too hard to follow the logic. Instead, route #DB and NMI through DECLARE/DEFINE_IDTENTRY_RAW on Xen, and do the right thing for #DB. Also add more warnings to the exc_debug* handlers to make this type of failure more obvious. This fixes various forms of corruption that happen when usermode triggers #DB on Xen PV. Fixes: 4c0dcd83 ("x86/entry: Implement user mode C entry points for #DB and #MCE") Signed-off-by:
-
Andy Lutomirski authored
Chasing down a Xen bug caused me to realize that the new entry sanity checks are still fairly weak. Add some more checks. Signed-off-by:
-
Andy Lutomirski authored
Move the clearing of the high bits of RAX after Xen PV joins the SYSENTER path so that Xen PV doesn't skip it. Arguably this code should be deleted instead, but that would belong in the merge window. Fixes: ffae641f ("x86/entry/64/compat: Fix Xen PV SYSENTER frame setup") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen fixes from Juergen Gross: "One small cleanup patch for ARM and two patches for the xenbus driver fixing latent problems (large stack allocations and bad return code settings)" * tag 'for-linus-5.8b-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/xenbus: let xenbus_map_ring_valloc() return errno values only xen/xenbus: avoid large structs and arrays on the stack arm/xen: remove the unused macro GRANT_TABLE_PHYSADDR
-
Wolfram Sang authored
I2C_SMBUS_BLOCK_MAX defines already the maximum number as defined in the SMBus 2.0 specs. I don't see a reason to add 1 here. Also, fix the errno to what is suggested for this error. Fixes: c9bfdc7c ("i2c: mlxcpld: Add support for smbus block read transaction") Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by:
Michael Shych <michaelsh@mellanox.com> Tested-by:
Wolfram Sang <wsa@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull sysctl fix from Al Viro: "Another regression fix for sysctl changes this cycle..." * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: Call sysctl_head_finish on error
-
Wolfram Sang authored
I can't recall why there was none, but we surely want to have it. Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
