We had a handful of bugs relating to key being either all 0
or just reported incorrectly as all 0. Check for this in
the tests.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We expect drivers implementing the new create/modify/destroy
API to populate the defaults in struct ethtool_rxfh_context.
In legacy API ctx isn't even passed, and rxfh.indir / rxfh.key
are NULL so drivers can't give us defaults even if they want to.
Call get_rxfh() to fetch the values. We can reuse rxfh_dev
for the get_rxfh(), rxfh stores the input from the user.

This fixes IOCTL reporting 0s instead of the default key /
indir table for drivers using legacy API.

Add a check to try to catch drivers using the new API
but not populating the key.

Fixes: 7964e788 ("net: ethtool: use the tracking array for get_rxfh on custom RSS contexts")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The indirection table and the key follow struct ethtool_rxfh
in user memory.

To reset the indirection table user space calls SET_RXFH with
table of size 0 (OTOH to say "no change" it should use -1 / ~0).
The logic for calculating the offset where they key sits is
incorrect in this case, as kernel would still offset by the full
table length, while for the reset there is no indir table and
key is immediately after the struct.

  $ ethtool -X eth0 default hkey 01:02:03...
  $ ethtool -x eth0
  [...]
  RSS hash key:
00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
  [...]

Fixes: 3de0b592 ("ethtool: Support for configurable RSS hash key")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

As described in the kdoc for .create_rxfh_context we are responsible
for populating the defaults. The core will not call .get_rxfh
for non-0 context.

The problem can be easily observed since Netlink doesn't currently
use the cache. Using netlink ethtool:

  $ ethtool -x eth0 context 1
  [...]
  RSS hash key:
  13:60:cd:60:14:d3:55:36:86:df:90:f2:96:14:e2:21:05:57:a8:8f:a5:12:5e:54:62:7f:fd:3c:15:7e:76:05:71:42:a2:9a:73:80:09:9c
  RSS hash function:
      toeplitz: on
      xor: off
      crc32: off

But using IOCTL ethtool shows:

  $ ./ethtool-old -x eth0 context 1
  [...]
  RSS hash key:
  00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
  RSS hash function:
      Operation not supported

Fixes: 7964e788 ("net: ethtool: use the tracking array for get_rxfh on custom RSS contexts")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In commit under Fixes I split the bnxt_set_rxfh_context() function,
and attached the appropriate chunks to new ops. I missed that
bnxt_set_rxfh_context() gets called after some initial checks
in bnxt_set_rxfh(), namely that the hash function is Toeplitz.

Fixes: 5c466b4d ("eth: bnxt: move from .set_rxfh to .create_rxfh_context and friends")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are cases where do_xdp_generic returns bpf_net_context without
clearing it. This causes various memory corruptions, so the missing
bpf_net_ctx_clear must be added.

Reported-by: syzbot+44623300f057a28baf1e@syzkaller.appspotmail.com
Fixes: fecef4cd ("tun: Assign missing bpf_net_context.")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reported-by: syzbot+3c2b6d5d4bec3b904933@syzkaller.appspotmail.com
Reported-by: syzbot+707d98c8649695eaf329@syzkaller.appspotmail.com
Reported-by: syzbot+c226757eb784a9da3e8b@syzkaller.appspotmail.com
Reported-by: syzbot+61a1cfc2b6632363d319@syzkaller.appspotmail.com
Reported-by: syzbot+709e4c85c904bcd62735@syzkaller.appspotmail.com
Signed-off-by: David S. Miller <davem@davemloft.net>

Luiz Augusto von Dentz says:

====================
bluetooth pull request for net:

 - btmtk: Fix kernel crash when entering btmtk_usb_suspend
 - btmtk: Fix btmtk.c undefined reference build error
 - btintel: Fail setup on error
 - hci_sync: Fix suspending with wrong filter policy
 - hci_event: Fix setting DISCOVERY_FINDING for passive scanning

* tag 'for-net-2024-07-26' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
  Bluetooth: hci_event: Fix setting DISCOVERY_FINDING for passive scanning
  Bluetooth: btmtk: remove #ifdef around declarations
  Bluetooth: btmtk: Fix btmtk.c undefined reference build error harder
  Bluetooth: btmtk: Fix btmtk.c undefined reference build error
  Bluetooth: hci_sync: Fix suspending with wrong filter policy
  Bluetooth: btmtk: Fix kernel crash when entering btmtk_usb_suspend
  Bluetooth: btintel: Fail setup on error
====================

Link: https://patch.msgid.link/20240726150502.3300832-1-luiz.dentz@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In testing the recent kernel I found that the fbnic driver couldn't be
enabled on x86_64 builds. A bit of digging showed that the fbnic driver was
the only one to check for S390 to be n, all others had checked for !S390.
Since it is a boolean and not a tristate I am not sure it will be N. So
just update it to use the !S390 flag.

A quick check via "make menuconfig" verified that after making this change
there was an option to select the fbnic driver.

Fixes 0e03c643 ("eth: fbnic: fix s390 build.")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/172192698293.1903337.4255690118685300353.stgit@ahduyck-xeon-server.home.arpaSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Johannes Berg says:

====================
Couple of more urgent fixes:
 * ath12k: wowlan loop iteration issue
 * ath12k: fix soft lockup on suspend in certain scenarios
 * mt76: fix crash when removing an interface
 * mac80211: fix injection crash with some drivers that
   don't want monitor vif
 * cfg80211: fix S1G beacon parsing in scan
 * cfg80211: fix MLO link status reporting on connect

* tag 'wireless-2024-07-26' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
  wifi: ath12k: fix soft lockup on suspend
  wifi: mt76: mt7921: fix null pointer access in mt792x_mac_link_bss_remove
  wifi: ath12k: fix reusing outside iterator in ath12k_wow_vif_set_wakeups()
  wifi: cfg80211: correct S1G beacon length calculation
  wifi: cfg80211: fix reporting failed MLO links status with cfg80211_connect_done
  wifi: mac80211: use monitor sdata with driver only if desired
====================

Link: https://patch.msgid.link/20240726122638.942420-3-johannes@sipsolutions.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

DISCOVERY_FINDING shall only be set for active scanning as passive
scanning is not meant to generate MGMT Device Found events causing
discovering state to go out of sync since userspace would believe it
is discovering when in fact it is just passive scanning.

Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219088
Fixes: 2e2515c1 ("Bluetooth: hci_event: Set DISCOVERY_FINDING on SCAN_ENABLED")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

The caller of these functions in btusb.c is guarded with an
if(IS_ENABLED()) style check, so dead code is left out, but the
declarations are still needed at compile time:

drivers/bluetooth/btusb.c: In function 'btusb_mtk_reset':
drivers/bluetooth/btusb.c:2705:15: error: implicit declaration of function 'btmtk_usb_subsys_reset' [-Wimplicit-function-declaration]
 2705 |         err = btmtk_usb_subsys_reset(hdev, btmtk_data->dev_id);
      |               ^~~~~~~~~~~~~~~~~~~~~~
drivers/bluetooth/btusb.c: In function 'btusb_send_frame_mtk':
drivers/bluetooth/btusb.c:2720:23: error: implicit declaration of function 'alloc_mtk_intr_urb' [-Wimplicit-function-declaration]
 2720 |                 urb = alloc_mtk_intr_urb(hdev, skb, btusb_tx_complete);
      |                       ^~~~~~~~~~~~~~~~~~
drivers/bluetooth/btusb.c:2720:21: error: assignment to 'struct urb *' from 'int' makes pointer from integer without a cast [-Wint-conversion]
 2720 |                 urb = alloc_mtk_intr_urb(hdev, skb, btusb_tx_complete);
      |                     ^

Fixes: f0c83a23 ("Bluetooth: btmtk: Fix btmtk.c undefined reference build error")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

The previous fix was incomplete as the link failure still persists
with CONFIG_USB=m when the sdio or serial wrappers for btmtk.c
are build-in:

btmtk.c:(.text+0x468): undefined reference to `usb_alloc_urb'
btmtk.c:(.text+0x488): undefined reference to `usb_free_urb'
btmtk.c:(.text+0x500): undefined reference to `usb_anchor_urb'
btmtk.c:(.text+0x50a): undefined reference to `usb_submit_urb'
btmtk.c:(.text+0x92c): undefined reference to `usb_control_msg'
btmtk.c:(.text+0xa92): undefined reference to `usb_unanchor_urb'
btmtk.c:(.text+0x11e4): undefined reference to `usb_set_interface'
btmtk.c:(.text+0x120a): undefined reference to `usb_kill_anchored_urbs'

Disallow this configuration.

Fixes: f0c83a23 ("Bluetooth: btmtk: Fix btmtk.c undefined reference build error")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

MediaTek moved some usb interface related function to btmtk.c which
may cause build failed if BT USB Kconfig wasn't enabled.
Fix undefined reference by adding config check.

btmtk.c:(.text+0x89c): undefined reference to `usb_alloc_urb'
btmtk.c:(.text+0x8e3): undefined reference to `usb_free_urb'
btmtk.c:(.text+0x956): undefined reference to `usb_free_urb'
btmtk.c:(.text+0xa0e): undefined reference to `usb_anchor_urb'
btmtk.c:(.text+0xb43): undefined reference to `usb_autopm_get_interface'
btmtk.c:(.text+0xb7e): undefined reference to `usb_autopm_put_interface'
btmtk.c:(.text+0xf70): undefined reference to `usb_disable_autosuspend'
btmtk.c:(.text+0x133a): undefined reference to `usb_control_msg'

Fixes: d019930b ("Bluetooth: btmtk: move btusb_mtk_hci_wmt_sync to btmtk.c")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202407091928.AH0aGZnx-lkp@intel.com/Signed-off-by: Chris Lu <chris.lu@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

When suspending the scan filter policy cannot be 0x00 (no acceptlist)
since that means the host has to process every advertisement report
waking up the system, so this attempts to check if hdev is marked as
suspended and if the resulting filter policy would be 0x00 (no
acceptlist) then skip passive scanning if thre no devices in the
acceptlist otherwise reset the filter policy to 0x01 so the acceptlist
is used since the devices programmed there can still wakeup be system.

Fixes: 182ee45d ("Bluetooth: hci_sync: Rework hci_suspend_notifier")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

If MediaTek's Bluetooth setup is unsuccessful, a NULL pointer issue
occur when the system is suspended and the anchored kill function
is called. To avoid this, add protection to prevent executing the
anchored kill function if the setup is unsuccessful.

[    6.922106] Hardware name: Acer Tomato (rev2) board (DT)
[    6.922114] Workqueue: pm pm_runtime_work
[    6.922132] pstate: 804000c9
(Nzcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    6.922147] pc : usb_kill_anchored_urbs+0x6c/0x1e0
[    6.922164] lr : usb_kill_anchored_urbs+0x48/0x1e0
[    6.922181] sp : ffff800080903b60
[    6.922187] x29: ffff800080903b60
x28: ffff2c7b85c32b80 x27: ffff2c7bbb370930
[    6.922211] x26: 00000000000f4240
x25: 00000000ffffffff x24: ffffd49ece2dcb48
[    6.922255] x20: ffffffffffffffd8
x19: 0000000000000000 x18: 0000000000000006
[    6.922276] x17: 6531656337386238
x16: 3632373862333863 x15: ffff800080903480
[    6.922297] x14: 0000000000000000
x13: 303278302f303178 x12: ffffd49ecf090e30
[    6.922318] x11: 0000000000000001
x10: 0000000000000001 x9 : ffffd49ecd2c5bb4
[    6.922339] x8 : c0000000ffffdfff
x7 : ffffd49ecefe0db8 x6 : 00000000000affa8
[    6.922360] x5 : ffff2c7bbb35dd48
x4 : 0000000000000000 x3 : 0000000000000000
[    6.922379] x2 : 0000000000000000
x1 : 0000000000000003 x0 : ffffffffffffffd8
[    6.922400] Call trace:
[    6.922405]  usb_kill_anchored_urbs+0x6c/0x1e0
[    6.922422]  btmtk_usb_suspend+0x20/0x38
[btmtk 5f200a97badbdfda4266773fee49acfc8e0224d5]
[    6.922444]  btusb_suspend+0xd0/0x210
[btusb 0bfbf19a87ff406c83b87268b87ce1e80e9a829b]
[    6.922469]  usb_suspend_both+0x90/0x288
[    6.922487]  usb_runtime_suspend+0x3c/0xa8
[    6.922507]  __rpm_callback+0x50/0x1f0
[    6.922523]  rpm_callback+0x70/0x88
[    6.922538]  rpm_suspend+0xe4/0x5a0
[    6.922553]  pm_runtime_work+0xd4/0xe0
[    6.922569]  process_one_work+0x18c/0x440
[    6.922588]  worker_thread+0x314/0x428
[    6.922606]  kthread+0x128/0x138
[    6.922621]  ret_from_fork+0x10/0x20
[    6.922644] Code: f100a274 54000520 d503201f d100a260 (b8370000)
[    6.922654] ---[ end trace 0000000000000000 ]---

Fixes: ceac1cb0 ("Bluetooth: btusb: mediatek: add ISO data transmission functions")
Signed-off-by: Chris Lu <chris.lu@mediatek.com>
Reported-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> #KernelCI
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Do not attempt to send any hci command to controller if *setup* function
fails.

Fixes: af395330 ("Bluetooth: btintel: Add Intel devcoredump support")
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

The PHY built in to the Realtek RTL8366S switch controller was
previously supported by genphy_driver. This PHY does not implement MMD
operations. Since commit 9b01c885 ("net: phy: c22: migrate to
genphy_c45_write_eee_adv()"), MMD register reads have been made during
phy_probe to determine EEE support. For genphy_driver, these reads are
transformed into 802.3 annex 22D clause 45-over-clause 22
mmd_phy_indirect operations that perform MII register writes to
MII_MMD_CTRL and MII_MMD_DATA. This overwrites those two MII registers,
which on this PHY are reserved and have another function, rendering the
PHY unusable while so configured.

Proper support for this PHY is restored by providing a phy_driver that
declares MMD operations as unsupported by using the helper functions
provided for that purpose, while remaining otherwise identical to
genphy_driver.

Fixes: 9b01c885 ("net: phy: c22: migrate to genphy_c45_write_eee_adv()")
Reported-by: Russell Senior <russell@personaltelco.net>
Closes: https://github.com/openwrt/openwrt/issues/15981
Link: https://github.com/openwrt/openwrt/issues/15739Signed-off-by: Mark Mentovai <mark@mentovai.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ext interrupts are enabled when the firmware has been started, but
this may never happen, for example, if the board configuration file is
missing.

When the system is later suspended, the driver unconditionally tries to
disable interrupts, which results in an irq disable imbalance and causes
the driver to spin indefinitely in napi_synchronize().

Make sure that the interrupts have been enabled before attempting to
disable them.

Fixes: d8899132 ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Cc: stable@vger.kernel.org	# 6.3
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://patch.msgid.link/20240709073132.9168-1-johan+linaro@kernel.orgSigned-off-by: Johannes Berg <johannes.berg@intel.com>

Fix null pointer access in mt792x_mac_link_bss_remove.

To prevent null pointer access, we should assign the vif to bss_conf in
mt7921_add_interface. This ensures that subsequent operations on the BSS
can properly reference the correct vif.

[  T843] Call Trace:
[  T843]  <TASK>
[  T843]  ? __die+0x1e/0x60
[  T843]  ? page_fault_oops+0x157/0x450
[  T843]  ? srso_alias_return_thunk+0x5/0xfbef5
[  T843]  ? srso_alias_return_thunk+0x5/0xfbef5
[  T843]  ? search_bpf_extables+0x5a/0x80
[  T843]  ? srso_alias_return_thunk+0x5/0xfbef5
[  T843]  ? exc_page_fault+0x2bb/0x670
[  T843]  ? srso_alias_return_thunk+0x5/0xfbef5
[  T843]  ? lock_timer_base+0x71/0x90
[  T843]  ? asm_exc_page_fault+0x26/0x30
[  T843]  ? mt792x_mac_link_bss_remove+0x24/0x110 [mt792x_lib]
[  T843]  ? mt792x_remove_interface+0x6e/0x90 [mt792x_lib]
[  T843]  ? ieee80211_do_stop+0x507/0x7e0 [mac80211]
[  T843]  ? ieee80211_stop+0x53/0x190 [mac80211]
[  T843]  ? __dev_close_many+0xa5/0x120
[  T843]  ? __dev_change_flags+0x18c/0x220
[  T843]  ? dev_change_flags+0x21/0x60
[  T843]  ? do_setlink+0xdf9/0x11d0
[  T843]  ? srso_alias_return_thunk+0x5/0xfbef5
[  T843]  ? srso_alias_return_thunk+0x5/0xfbef5
[  T843]  ? security_sock_rcv_skb+0x33/0x50
[  T843]  ? srso_alias_return_thunk+0x5/0xfbef5
[  T843]  ? srso_alias_return_thunk+0x5/0xfbef5
[  T843]  ? __nla_validate_parse+0x61/0xd10
[  T843]  ? srso_alias_return_thunk+0x5/0xfbef5
[  T843]  ? genl_done+0x53/0x80
[  T843]  ? srso_alias_return_thunk+0x5/0xfbef5
[  T843]  ? netlink_dump+0x357/0x410
[  T843]  ? __rtnl_newlink+0x5d6/0x980
[  T843]  ? srso_alias_return_thunk+0x5/0xfbef5
[  T843]  ? genl_family_rcv_msg_dumpit+0xdf/0xf0
[  T843]  ? srso_alias_return_thunk+0x5/0xfbef5
[  T843]  ? __kmalloc_cache_noprof+0x44/0x210
[  T843]  ? rtnl_newlink+0x42/0x60
[  T843]  ? rtnetlink_rcv_msg+0x152/0x3f0
[  T843]  ? mptcp_pm_nl_dump_addr+0x180/0x180
[  T843]  ? rtnl_calcit.isra.0+0x130/0x130
[  T843]  ? netlink_rcv_skb+0x56/0x100
[  T843]  ? netlink_unicast+0x199/0x290
[  T843]  ? netlink_sendmsg+0x21d/0x490
[  T843]  ? __sock_sendmsg+0x78/0x80
[  T843]  ? ____sys_sendmsg+0x23f/0x2e0
[  T843]  ? srso_alias_return_thunk+0x5/0xfbef5
[  T843]  ? copy_msghdr_from_user+0x68/0xa0
[  T843]  ? ___sys_sendmsg+0x81/0xd0
[  T843]  ? srso_alias_return_thunk+0x5/0xfbef5
[  T843]  ? crng_fast_key_erasure+0xbc/0xf0
[  T843]  ? srso_alias_return_thunk+0x5/0xfbef5
[  T843]  ? get_random_bytes_user+0x126/0x140
[  T843]  ? srso_alias_return_thunk+0x5/0xfbef5
[  T843]  ? __fdget+0xb1/0xe0
[  T843]  ? __sys_sendmsg+0x56/0xa0
[  T843]  ? srso_alias_return_thunk+0x5/0xfbef5
[  T843]  ? do_syscall_64+0x5f/0x170
[  T843]  ? entry_SYSCALL_64_after_hwframe+0x55/0x5d
[  T843]  </TASK>

Fixes: 1541d63c ("wifi: mt76: mt7925: add mt7925_mac_link_bss_remove to remove per-link BSS")
Reported-by: Bert Karwatzki <spasswolf@web.de>
Closes: https://lore.kernel.org/linux-wireless/2fee61f8c903d02a900ca3188c3742c7effd102e.camel@web.de/#bSigned-off-by: Sean Wang <sean.wang@mediatek.com>
Tested-by: Bert Karwatzki <spasswolf@web.de>
Link: https://patch.msgid.link/20240718234633.12737-1-sean.wang@kernel.orgSigned-off-by: Johannes Berg <johannes.berg@intel.com>

Smatch throws below warning:

	drivers/net/wireless/ath/ath12k/wow.c:434 ath12k_wow_vif_set_wakeups()
	warn: reusing outside iterator: 'i'

	drivers/net/wireless/ath/ath12k/wow.c
	    411         default:
	    412                 break;
	    413         }
	    414
	    415         for (i = 0; i < wowlan->n_patterns; i++) {
	                            ^^^^^^^^^^^^^^^^^^^^^^
	Here we loop until ->n_patterns

	    416                 const struct cfg80211_pkt_pattern *eth_pattern = &patterns[i];
	    417                 struct ath12k_pkt_pattern new_pattern = {};
	    418
	    419                 if (WARN_ON(eth_pattern->pattern_len > WOW_MAX_PATTERN_SIZE))
	    420                         return -EINVAL;
	    421
	    422                 if (ar->ab->wow.wmi_conf_rx_decap_mode ==
	    423                     ATH12K_HW_TXRX_NATIVE_WIFI) {
	    424                         ath12k_wow_convert_8023_to_80211(ar, eth_pattern,
	    425                                                          &new_pattern);
	    426
	    427                         if (WARN_ON(new_pattern.pattern_len > WOW_MAX_PATTERN_SIZE))
	    428                                 return -EINVAL;
	    429                 } else {
	    430                         memcpy(new_pattern.pattern, eth_pattern->pattern,
	    431                                eth_pattern->pattern_len);
	    432
	    433                         /* convert bitmask to bytemask */
	--> 434                         for (i = 0; i < eth_pattern->pattern_len; i++)
	    435                                 if (eth_pattern->mask[i / 8] & BIT(i % 8))
	    436                                         new_pattern.bytemask[i] = 0xff;

	This loop re-uses i and the loop ends with i == eth_pattern->pattern_len.
	This looks like a bug.

Change to use a new iterator 'j' for the inner loop to fix it.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4

Fixes: 4a3c212e ("wifi: ath12k: add basic WoW functionalities")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/d4975b95-9c43-45af-a0ab-80253f18c7f2@stanley.mountain/Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://patch.msgid.link/20240722033332.6273-1-quic_bqiang@quicinc.comSigned-off-by: Johannes Berg <johannes.berg@intel.com>

The minimum header length calculation (equivalent to the start
of the elements) for the S1G long beacon erroneously required
only up to the start of u.s1g_beacon rather than the start of
u.s1g_beacon.variable. Fix that, and also shuffle the branches
around a bit to not assign useless values that are overwritten
later.

Reported-by: syzbot+0f3afa93b91202f21939@syzkaller.appspotmail.com
Fixes: 9eaffe50 ("cfg80211: convert S1G beacon to scan results")
Link: https://patch.msgid.link/20240724132912.9662972db7c1.I8779675b5bbda4994cc66f876b6b87a2361c3c0b@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>

Individual MLO links connection status is not copied to
EVENT_CONNECT_RESULT data while processing the connect response
information in cfg80211_connect_done(). Due to this failed links
are wrongly indicated with success status in EVENT_CONNECT_RESULT.

To fix this, copy the individual MLO links status to the
EVENT_CONNECT_RESULT data.

Fixes: 53ad07e9 ("wifi: cfg80211: support reporting failed links")
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Reviewed-by: Carlos Llamas <cmllamas@google.com>
Link: https://patch.msgid.link/20240724125327.3495874-1-quic_vjakkam@quicinc.com
[commit message editorial changes]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

In commit 0d9c2bee ("wifi: mac80211: fix monitor channel
with chanctx emulation") I changed mac80211 to always have an
internal monitor_sdata to have something to have the chanctx
bound to.

However, if the driver didn't also have the WANT_MONITOR flag
this would cause mac80211 to allocate it without telling the
driver (which was intentional) but also use it for later APIs
to the driver without it ever having known about it which was
_not_ intentional.

Check through the code and only use the monitor_sdata in the
relevant places (TX, MU-MIMO follow settings, TX power, and
interface iteration) when the WANT_MONITOR flag is set.

Cc: stable@vger.kernel.org
Fixes: 0d9c2bee ("wifi: mac80211: fix monitor channel with chanctx emulation")
Reported-by: ZeroBeat <ZeroBeat@gmx.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219086Tested-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20240725184836.25d334157a8e.I02574086da2c5cf0e18264ce5807db6f14ffd9c0@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>

Blamed commit increased lookup key size from 2 bytes to 16 bytes,
because zones_ht_key got a struct net pointer.

Make sure rhashtable_lookup() is not using the padding bytes
which are not initialized.

 BUG: KMSAN: uninit-value in rht_ptr_rcu include/linux/rhashtable.h:376 [inline]
 BUG: KMSAN: uninit-value in __rhashtable_lookup include/linux/rhashtable.h:607 [inline]
 BUG: KMSAN: uninit-value in rhashtable_lookup include/linux/rhashtable.h:646 [inline]
 BUG: KMSAN: uninit-value in rhashtable_lookup_fast include/linux/rhashtable.h:672 [inline]
 BUG: KMSAN: uninit-value in tcf_ct_flow_table_get+0x611/0x2260 net/sched/act_ct.c:329
  rht_ptr_rcu include/linux/rhashtable.h:376 [inline]
  __rhashtable_lookup include/linux/rhashtable.h:607 [inline]
  rhashtable_lookup include/linux/rhashtable.h:646 [inline]
  rhashtable_lookup_fast include/linux/rhashtable.h:672 [inline]
  tcf_ct_flow_table_get+0x611/0x2260 net/sched/act_ct.c:329
  tcf_ct_init+0xa67/0x2890 net/sched/act_ct.c:1408
  tcf_action_init_1+0x6cc/0xb30 net/sched/act_api.c:1425
  tcf_action_init+0x458/0xf00 net/sched/act_api.c:1488
  tcf_action_add net/sched/act_api.c:2061 [inline]
  tc_ctl_action+0x4be/0x19d0 net/sched/act_api.c:2118
  rtnetlink_rcv_msg+0x12fc/0x1410 net/core/rtnetlink.c:6647
  netlink_rcv_skb+0x375/0x650 net/netlink/af_netlink.c:2550
  rtnetlink_rcv+0x34/0x40 net/core/rtnetlink.c:6665
  netlink_unicast_kernel net/netlink/af_netlink.c:1331 [inline]
  netlink_unicast+0xf52/0x1260 net/netlink/af_netlink.c:1357
  netlink_sendmsg+0x10da/0x11e0 net/netlink/af_netlink.c:1901
  sock_sendmsg_nosec net/socket.c:730 [inline]
  __sock_sendmsg+0x30f/0x380 net/socket.c:745
  ____sys_sendmsg+0x877/0xb60 net/socket.c:2597
  ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2651
  __sys_sendmsg net/socket.c:2680 [inline]
  __do_sys_sendmsg net/socket.c:2689 [inline]
  __se_sys_sendmsg net/socket.c:2687 [inline]
  __x64_sys_sendmsg+0x307/0x4a0 net/socket.c:2687
  x64_sys_call+0x2dd6/0x3c10 arch/x86/include/generated/asm/syscalls_64.h:47
  do_syscall_x64 arch/x86/entry/common.c:52 [inline]
  do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x77/0x7f

Local variable key created at:
  tcf_ct_flow_table_get+0x4a/0x2260 net/sched/act_ct.c:324
  tcf_ct_init+0xa67/0x2890 net/sched/act_ct.c:1408

Fixes: 88c67aeb ("sched: act_ct: add netns into the key of tcf_ct_flow_table")
Reported-by: syzbot+1b5e4e187cc586d05ea0@syzkaller.appspotmail.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It could lead to error happen because the variable res is not updated if
the call to sr_share_read_word returns an error. In this particular case
error code was returned and res stayed uninitialized. Same issue also
applies to sr_read_reg.

This can be avoided by checking the return value of sr_share_read_word
and sr_read_reg, and propagating the error if the read operation failed.

Found by code review.

Cc: stable@vger.kernel.org
Fixes: c9b37458 ("USB2NET : SR9700 : One chip USB 1.1 USB2NET SR9700Device Driver Support")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Reviewed-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
ethtool: rss: small fixes to spec and GET

Two small fixes to the ethtool RSS_GET over Netlink.
Spec is a bit inaccurate and responses miss an identifier.
====================

Link: https://patch.msgid.link/20240724234249.2621109-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The response to a GET request in Netlink should fully identify
the queried object. RSS_GET accepts context id as an input,
so it must echo that attribute back to the response.

After (assuming context 1 has been created):

  $ ./cli.py --spec netlink/specs/ethtool.yaml \
             --do rss-get \
	     --json '{"header": {"dev-index": 2}, "context": 1}'
  {'context': 1,
   'header': {'dev-index': 2, 'dev-name': 'eth0'},
  [...]

Fixes: 7112a046 ("ethtool: add netlink based get rss support")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20240724234249.2621109-3-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The spec for Ethtool is a bit inaccurate. We don't currently
support dump. Context is only accepted as input and not echoed
to output (which is a separate bug).

Fixes: a353318e ("tools: ynl: populate most of the ethtool spec")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20240724234249.2621109-2-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In __bnxt_reserve_rings(), the existing code unconditionally sets the
default RSS indirection table to default if netif_is_rxfh_configured()
returns false.  This used to be correct before we added RSS contexts
support.  For example, if the user is changing the number of ethtool
channels, we will enter this path to reserve the new number of rings.
We will then set the RSS indirection table to default to cover the new
number of rings if netif_is_rxfh_configured() is false.

Now, with RSS contexts support, if the user has added or deleted RSS
contexts, we may now enter this path to reserve the new number of VNICs.
However, netif_is_rxfh_configured() will not return the correct state if
we are still in the middle of set_rxfh().  So the existing code may
set the indirection table of the default RSS context to default by
mistake.

Fix it to check if the reservation of the RX rings is changing.  Only
check netif_is_rxfh_configured() if it is changing.  RX rings will not
change in the middle of set_rxfh() and this will fix the issue.

Fixes: b3d0083c ("bnxt_en: Support RSS contexts in ethtool .{get|set}_rxfh()")
Reported-and-tested-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/20240625010210.2002310-1-kuba@kernel.orgReviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20240724222106.147744-1-michael.chan@broadcom.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from bpf and netfilter.

  A lot of networking people were at a conference last week, busy
  catching COVID, so relatively short PR.

  Current release - regressions:

   - tcp: process the 3rd ACK with sk_socket for TFO and MPTCP

  Current release - new code bugs:

   - l2tp: protect session IDR and tunnel session list with one lock,
     make sure the state is coherent to avoid a warning

   - eth: bnxt_en: update xdp_rxq_info in queue restart logic

   - eth: airoha: fix location of the MBI_RX_AGE_SEL_MASK field

  Previous releases - regressions:

   - xsk: require XDP_UMEM_TX_METADATA_LEN to actuate tx_metadata_len,
     the field reuses previously un-validated pad

  Previous releases - always broken:

   - tap/tun: drop short frames to prevent crashes later in the stack

   - eth: ice: add a per-VF limit on number of FDIR filters

   - af_unix: disable MSG_OOB handling for sockets in sockmap/sockhash"

* tag 'net-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (34 commits)
  tun: add missing verification for short frame
  tap: add missing verification for short frame
  mISDN: Fix a use after free in hfcmulti_tx()
  gve: Fix an edge case for TSO skb validity check
  bnxt_en: update xdp_rxq_info in queue restart logic
  tcp: process the 3rd ACK with sk_socket for TFO/MPTCP
  selftests/bpf: Add XDP_UMEM_TX_METADATA_LEN to XSK TX metadata test
  xsk: Require XDP_UMEM_TX_METADATA_LEN to actuate tx_metadata_len
  bpf: Fix a segment issue when downgrading gso_size
  net: mediatek: Fix potential NULL pointer dereference in dummy net_device handling
  MAINTAINERS: make Breno the netconsole maintainer
  MAINTAINERS: Update bonding entry
  net: nexthop: Initialize all fields in dumped nexthops
  net: stmmac: Correct byte order of perfect_match
  selftests: forwarding: skip if kernel not support setting bridge fdb learning limit
  tipc: Return non-zero value from tipc_udp_addr2str() on error
  netfilter: nft_set_pipapo_avx2: disable softinterrupts
  ice: Fix recipe read procedure
  ice: Add a per-VF limit on number of FDIR filters
  net: bonding: correctly annotate RCU in bond_should_notify_peers()
  ...

Pull printk updates from Petr Mladek:

 - trivial printk changes

The bigger "real" printk work is still being discussed.

* tag 'printk-for-6.11-trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
  vsprintf: add missing MODULE_DESCRIPTION() macro
  printk: Rename console_replay_all() and update context

Pull sysctl constification from Joel Granados:
 "Treewide constification of the ctl_table argument of proc_handlers
  using a coccinelle script and some manual code formatting fixups.

  This is a prerequisite to moving the static ctl_table structs into
  read-only data section which will ensure that proc_handler function
  pointers cannot be modified"

* tag 'constfy-sysctl-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl:
  sysctl: treewide: constify the ctl_table argument of proc_handlers

Pull EFI fixes from Ard Biesheuvel:

 - Wipe screen_info after allocating it from the heap - used by arm32
   and EFI zboot, other EFI architectures allocate it statically

 - Revert to allocating boot_params from the heap on x86 when entering
   via the native PE entrypoint, to work around a regression on older
   Dell hardware

* tag 'efi-fixes-for-v6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  x86/efistub: Revert to heap allocated boot_params for PE entrypoint
  efi/libstub: Zero initialize heap allocated struct screen_info

Pull kgdb updates from Daniel Thompson:
 "Three small changes this cycle:

   - Clean up an architecture abstraction that is no longer needed
     because all the architectures have converged.

   - Actually use the prompt argument to kdb_position_cursor() instead
     of ignoring it (functionally this fix is a nop but that was due to
     luck rather than good judgement)

   - Fix a -Wformat-security warning"

* tag 'kgdb-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
  kdb: Get rid of redundant kdb_curr_task()
  kdb: Use the passed prompt in kdb_position_cursor()
  kdb: address -Wformat-security warnings

Pull MIPS updates from Thomas Bogendoerfer:

 - Use improved timer sync for Loongson64

 - Fix address of GCR_ACCESS register

 - Add missing MODULE_DESCRIPTION

* tag 'mips_6.11_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  mips: sibyte: add missing MODULE_DESCRIPTION() macro
  MIPS: SMP-CPS: Fix address for GCR_ACCESS register for CM3 and later
  MIPS: Loongson64: Switch to SYNC_R4K

Merge tag 'parisc-for-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux

Pull parisc updates from Helge Deller:
 "The gettimeofday() and clock_gettime() syscalls are now available as
  vDSO functions, and Dave added a patch which allows to use NVMe cards
  in the PCI slots as fast and easy alternative to SCSI discs.

  Summary:

   - add gettimeofday() and clock_gettime() vDSO functions

   - enable PCI_MSI_ARCH_FALLBACKS to allow PCI to PCIe bridge adaptor
     with PCIe NVME card to function in parisc machines

   - allow users to reduce kernel unaligned runtime warnings

   - minor code cleanups"

* tag 'parisc-for-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Add support for CONFIG_SYSCTL_ARCH_UNALIGN_NO_WARN
  parisc: Use max() to calculate parisc_tlb_flush_threshold
  parisc: Fix warning at drivers/pci/msi/msi.h:121
  parisc: Add 64-bit gettimeofday() and clock_gettime() vDSO functions
  parisc: Add 32-bit gettimeofday() and clock_gettime() vDSO functions
  parisc: Clean up unistd.h file

Pull UML updates from Richard Weinberger:

 - Support for preemption

 - i386 Rust support

 - Huge cleanup by Benjamin Berg

 - UBSAN support

 - Removal of dead code

* tag 'uml-for-linus-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux: (41 commits)
  um: vector: always reset vp->opened
  um: vector: remove vp->lock
  um: register power-off handler
  um: line: always fill *error_out in setup_one_line()
  um: remove pcap driver from documentation
  um: Enable preemption in UML
  um: refactor TLB update handling
  um: simplify and consolidate TLB updates
  um: remove force_flush_all from fork_handler
  um: Do not flush MM in flush_thread
  um: Delay flushing syscalls until the thread is restarted
  um: remove copy_context_skas0
  um: remove LDT support
  um: compress memory related stub syscalls while adding them
  um: Rework syscall handling
  um: Add generic stub_syscall6 function
  um: Create signal stack memory assignment in stub_data
  um: Remove stub-data.h include from common-offsets.h
  um: time-travel: fix signal blocking race/hang
  um: time-travel: remove time_exit()
  ...

Merge tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here is the big set of driver core changes for 6.11-rc1.

  Lots of stuff in here, with not a huge diffstat, but apis are evolving
  which required lots of files to be touched. Highlights of the changes
  in here are:

   - platform remove callback api final fixups (Uwe took many releases
     to get here, finally!)

   - Rust bindings for basic firmware apis and initial driver-core
     interactions.

     It's not all that useful for a "write a whole driver in rust" type
     of thing, but the firmware bindings do help out the phy rust
     drivers, and the driver core bindings give a solid base on which
     others can start their work.

     There is still a long way to go here before we have a multitude of
     rust drivers being added, but it's a great first step.

   - driver core const api changes.

     This reached across all bus types, and there are some fix-ups for
     some not-common bus types that linux-next and 0-day testing shook
     out.

     This work is being done to help make the rust bindings more safe,
     as well as the C code, moving toward the end-goal of allowing us to
     put driver structures into read-only memory. We aren't there yet,
     but are getting closer.

   - minor devres cleanups and fixes found by code inspection

   - arch_topology minor changes

   - other minor driver core cleanups

  All of these have been in linux-next for a very long time with no
  reported problems"

* tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
  ARM: sa1100: make match function take a const pointer
  sysfs/cpu: Make crash_hotplug attribute world-readable
  dio: Have dio_bus_match() callback take a const *
  zorro: make match function take a const pointer
  driver core: module: make module_[add|remove]_driver take a const *
  driver core: make driver_find_device() take a const *
  driver core: make driver_[create|remove]_file take a const *
  firmware_loader: fix soundness issue in `request_internal`
  firmware_loader: annotate doctests as `no_run`
  devres: Correct code style for functions that return a pointer type
  devres: Initialize an uninitialized struct member
  devres: Fix memory leakage caused by driver API devm_free_percpu()
  devres: Fix devm_krealloc() wasting memory
  driver core: platform: Switch to use kmemdup_array()
  driver core: have match() callback in struct bus_type take a const *
  MAINTAINERS: add Rust device abstractions to DRIVER CORE
  device: rust: improve safety comments
  MAINTAINERS: add Danilo as FIRMWARE LOADER maintainer
  MAINTAINERS: add Rust FW abstractions to FIRMWARE LOADER
  firmware: rust: improve safety comments
  ...

Pull watchdog updates from Wim Van Sebroeck:

 - make watchdog_class const

 - rework of the rzg2l_wdt driver

 - other small fixes and improvements

* tag 'linux-watchdog-6.11-rc1' of git://www.linux-watchdog.org/linux-watchdog:
  dt-bindings: watchdog: dlg,da9062-watchdog: Drop blank space
  watchdog: rzn1: Convert comma to semicolon
  watchdog: lenovo_se10_wdt: Convert comma to semicolon
  dt-bindings: watchdog: renesas,wdt: Document RZ/G3S support
  watchdog: rzg2l_wdt: Add suspend/resume support
  watchdog: rzg2l_wdt: Rely on the reset driver for doing proper reset
  watchdog: rzg2l_wdt: Remove comparison with zero
  watchdog: rzg2l_wdt: Remove reset de-assert from probe
  watchdog: rzg2l_wdt: Check return status of pm_runtime_put()
  watchdog: rzg2l_wdt: Use pm_runtime_resume_and_get()
  watchdog: rzg2l_wdt: Make the driver depend on PM
  watchdog: rzg2l_wdt: Restrict the driver to ARCH_RZG2L and ARCH_R9A09G011
  watchdog: imx7ulp_wdt: keep already running watchdog enabled
  watchdog: starfive: Add missing clk_disable_unprepare()
  watchdog: Make watchdog_class const

Pull dma-mapping fix from Christoph Hellwig:

 - fix the order of actions in dmam_free_coherent (Lance Richardson)

* tag 'dma-mapping-6.11-2024-07-24' of git://git.infradead.org/users/hch/dma-mapping:
  dma: fix call order in dmam_free_coherent