- 20 Mar, 2023 9 commits
-
-
Johan Hovold authored
A recent commit moved enabling of runtime PM to GPU load time (first open()) but failed to update the error paths so that runtime PM is disabled if initialisation of the GPU fails. This would trigger a warning about the unbalanced disable count on the next open() attempt. Note that pm_runtime_put_noidle() is sufficient to balance the usage count when pm_runtime_put_sync() fails (and is chosen over pm_runtime_resume_and_get() for consistency reasons). Fixes: 4b18299b ("drm/msm/adreno: Defer enabling runpm until hw_init()") Cc: stable@vger.kernel.org # 6.0 Signed-off-by:
Johan Hovold <johan+linaro@kernel.org> Patchwork: https://patchwork.freedesktop.org/patch/524971/ Link: https://lore.kernel.org/r/20230303164807.13124-3-johan+linaro@kernel.orgSigned-off-by:
Rob Clark <robdclark@chromium.org>
-
Konrad Dybcio authored
Add the dev_pm_opp_of_find_icc_paths() call to let the OPP framework handle bus voting as part of power level setting. Reviewed-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by:
Konrad Dybcio <konrad.dybcio@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/523787/ Link: https://lore.kernel.org/r/20230223-topic-opp-v3-7-5f22163cd1df@linaro.orgSigned-off-by:
-
Konrad Dybcio authored
Add support for gpu_busy on a4xx, which is required for devfreq support. Reviewed-by:
-
Konrad Dybcio authored
Add support for gpu_busy on a3xx, which is required for devfreq support. Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> #ifc6410 Reviewed-by:
-
Konrad Dybcio authored
Some older GPUs (namely a2xx with no opp tables at all and a320 with downstream-remnants gpu pwrlevels) used not to have OPP tables. They both however had just one frequency defined, making it extremely easy to construct such an OPP table from within the driver if need be. Do so and switch all clk_set_rate calls on core_clk to their OPP counterparts. Reviewed-by:
-
Akhil P Oommen authored
As per the recommended recovery sequence of adreno gpu, cx gdsc should collapse at hardware before it is turned back ON. This helps to clear out the stale states in hardware before it is reinitialized. Use the genpd notifier along with the newly introduced dev_pm_genpd_synced_poweroff() api to ensure that cx gdsc has collapsed before we turn it back ON. Signed-off-by:
Akhil P Oommen <quic_akhilpo@quicinc.com> Reviewed-by:
Ulf Hansson <ulf.hansson@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/516472/ Link: https://lore.kernel.org/r/20230102161757.v5.5.I9e10545c6a448d5eb1b734839b871d1b3146dac3@changeidSigned-off-by:
-
Akhil P Oommen authored
Remove the unused 'reset' interface which was supposed to help to ensure that cx gdsc has collapsed during gpu recovery. This is was not enabled so far due to missing gpucc driver support. Similar functionality using genpd framework will be implemented in the upcoming patch. This effectively reverts commit 1f6cca40 ("drm/msm/a6xx: Ensure CX collapse during gpu recovery"). Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Patchwork: https://patchwork.freedesktop.org/patch/516470/ Link: https://lore.kernel.org/r/20230102161757.v5.4.I96e0bf9eaf96dd866111c1eec8a4c9b70fd7cbcb@changeidSigned-off-by:
-
Akhil P Oommen authored
When a device has multiple power domains, dev->power_domain is left empty during probe. That didn't cause any issue so far because we are freeloading on smmu driver's vote on cx gdsc. Instead of that, create a device_link between cx genpd device and gmu device to keep a vote from gpu driver. Before this patch: localhost ~ # cat /sys/kernel/debug/pm_genpd/pm_genpd_summary gx_gdsc on 0 /devices/genpd:1:3d6a000.gmu active 0 cx_gdsc on 0 /devices/platform/soc@0/3da0000.iommu active 0 After this patch: localhost ~ # cat /sys/kernel/debug/pm_genpd/pm_genpd_summary gx_gdsc on 0 /devices/genpd:1:3d6a000.gmu active 0 cx_gdsc on 0 /devices/platform/soc@0/3da0000.iommu active 0 /devices/genpd:0:3d6a000.gmu active 0 Signed-off-by: -
Rob Clark authored
Merge drm-next into msm-next to pick up external clk and PM dependencies for improved a6xx GPU reset sequence. Signed-off-by:
-
- 15 Mar, 2023 1 commit
-
-
git://anongit.freedesktop.org/drm/drm-intelDave Airlie authored
Cross-subsystem Changes: - MEI patches to fix suspend/resume issues with the i915's PXP. (Alexander) Driver Changes: - Registers helpers and clean-ups. (Lucas) - PXP fixes and clean-ups. (Alan, Alexander) - CDCLK related fixes and w/a (Chaitanya, Stanislav) - Move display code to use RMW whenever possible (Andrzej) - PSR fixes (Jouni, Ville) - Implement async_flip mode per plane tracking (Andrzej) - Remove pre-production Workarounds (Matt) - HDMI related fixes (Ankit) - LVDS cleanup (Ville) - Watermark fixes and cleanups (Ville, Jani, Stanilav) - DMC code related fixes, cleanups and improvements (Jani) - Implement fb_dirty for PSR,FBC,DRRS fixes (Jouni) - Initial DSB improvements targeting LUTs loading (Ville) - HWMON related fixes (Ashutosh) - PCI ID updates (Jonathan, Matt Roper) - Fix leak in scatterlist (Matt Atwood) - Fix eDP+DSI dual panel systems (Ville) - Cast iomem to avoid sparese warnings (Jani) - Set default backlight controller index (Jani) - More MTL enabling (RK) - Conversion of display dev_priv towards i915 (Nirmoy) - Improvements in log/debug messages (Ville) - Increase slice_height for DP VDSC (Suraj) - VBT ports improvements (Ville) - Fix platforms without Display (Imre) - Other generic display code clean-ups (Ville, Jani, Rodrigo) - Add RPL-U sub platform (Chaitanya) - Add inverted backlight quirk for HP 14-r206nv (Mavroudis) - Transcoder timing improvements (Ville) - Track audio state per-transcoder (Ville) - Error/underrun interrupt fixes (Ville) - Update combo PHY init sequence (Matt Roper) - Get HDR DPCD refresh timeout (Ville) - Vblank improvements (Ville) - DSS fixes and cleanups (Jani) - PM code cleanup (Jani) - Split display parts related to RPS (Jani) Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZAez4aekcob8fTeh@intel.com
-
- 14 Mar, 2023 1 commit
-
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for v6.4-rc1: Note: Only changes since pull request from 2023-02-23 are included here. UAPI Changes: - Convert rockchip bindings to YAML. - Constify kobj_type structure in dma-buf. - FBDEV cmdline parser fixes, and other small fbdev fixes for mode parsing. Cross-subsystem Changes: - Add Neil Armstrong as linaro maintainer. - Actually signal the private stub dma-fence. Core Changes: - Add function for adding syncobj dep to sched_job and use it in panfrost, v3d. - Improve DisplayID 2.0 topology parsing and EDID parsing in general. - Add a gem eviction function and callback for generic GEM shrinker purposes. - Prepare to convert shmem helper to use the GEM reservation lock instead of own locking. (Actual commit itself got reverted for now) - Move the suballocator from radeon and amdgpu drivers to core in preparation for Xe. - Assorted small fixes and documentation. - Fixes to HPD polling. - Assorted small fixes in simpledrm, bridge, accel, shmem-helper, and the selftest of format-helper. - Remove dummy resource when ttm bo is created, and during pipelined gutting. Fix all drivers to accept a NULL ttm_bo->resource. - Handle pinned BO moving prevention in ttm core. - Set drm panel-bridge orientation before connector is registered. - Remove dumb_destroy callback. - Add documentation to GEM_CLOSE, PRIME_HANDLE_TO_FD, PRIME_FD_TO_HANDLE, GETFB2 ioctl's. - Add atomic enable_plane callback, use it in ast, mgag200, tidss. Driver Changes: - Use drm_gem_objects_lookup in vc4. - Assorted small fixes to virtio, ast, bridge/tc358762, meson, nouveau. - Allow virtio KMS to be disabled and compiled out. - Add Radxa 8/10HD, Samsung AMS495QA01 panels. - Fix ivpu compiler errors. - Assorted fixes to drm/panel, malidp, rockchip, ivpu, amdgpu, vgem, nouveau, vc4. - Assorted cleanups, simplifications and fixes to vmwgfx. Signed-off-by:
-
- 13 Mar, 2023 14 commits
-
-
Vinod Polimera authored
For the PSR to kick in, self_refresh_aware has to be set. Initialize it based on the PSR support for the eDP interface. Signed-off-by:
Vinod Polimera <quic_vpolimer@quicinc.com> Reviewed-by:
-
Vinod Polimera authored
Populate the enocder software structure to reflect the updated crtc appropriately during crtc enable/disable for a new commit while taking care of the self refresh transitions when crtc disable is triggered from the drm self refresh library. Signed-off-by:
-
Vinod Polimera authored
Enable PSR on eDP interface using drm self-refresh librabry. This patch uses a trigger from self-refresh library to enter/exit into PSR, when there are no updates from framework. Signed-off-by:
Kalyan Thota <quic_kalyant@quicinc.com> Signed-off-by:
-
Vinod Polimera authored
Use atomic variants for encoder callback functions such that certain states like self-refresh can be accessed as part of enable/disable sequence. Signed-off-by:
-
Vinod Polimera authored
The eDP and DP interfaces shared the bridge operations and the eDP specific changes were implemented under is_edp check. To add psr support for eDP, we started using a new set of eDP bridge ops. We are moving the eDP specific code in the dp_bridge_mode_valid function to a new eDP function, edp_bridge_mode_valid under the eDP bridge ops. Signed-off-by:
Sankeerth Billakanti <quic_sbillaka@quicinc.com> Signed-off-by:
-
Vinod Polimera authored
Add support for basic panel self refresh (PSR) feature for eDP. Add a new interface to set PSR state in the sink from DPU. Program the eDP controller to issue PSR enter and exit SDP to the sink. Signed-off-by:
-
Vinod Polimera authored
Use atomic variants for DP bridge callback functions so that the atomic state can be accessed in the interface drivers. The atomic state will help the driver find out if the display is in self refresh state. Signed-off-by:
Douglas Anderson <dianders@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/524731/ Link: https://lore.kernel.org/r/1677774797-31063-9-git-send-email-quic_vpolimer@quicinc.comSigned-off-by:
-
Vinod Polimera authored
Reset the datapath after disabling the timing gen, such that it can start on a clean slate when the intf is enabled back. This was a recommended sequence from the DPU HW programming guide. Signed-off-by:
-
Vinod Polimera authored
There can be a race between timing gen disable and vblank irq. The wait post timing gen disable may return early but intf disable sequence might not be completed. Ensure that, intf status is disabled before we retire the function. Signed-off-by:
-
Vinod Polimera authored
Recommended way of reading the interface timing gen status is via status register. Timing gen status register will give a reliable status of the interface especially during ON/OFF transitions. This support was added from DPU version 5.0.0. Signed-off-by:
-
Vinod Polimera authored
According to KMS documentation, The driver must not release any shared resources if active is set to false but enable still true. Fixes: ccc862b9 ("drm/msm/dpu: Fix reservation failures in modeset") Signed-off-by:
-
Vinod Polimera authored
This change will handle the psr entry exit cases in the panel bridge atomic callback functions. For example, the panel power should not turn off if the panel is entering psr. Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Patchwork: https://patchwork.freedesktop.org/patch/524721/ Link: https://lore.kernel.org/r/1677774797-31063-4-git-send-email-quic_vpolimer@quicinc.comSigned-off-by:
-
Vinod Polimera authored
Use atomic variants for panel bridge callback functions such that certain states like self-refresh can be accessed as part of enable/disable sequence. Signed-off-by:
-
Vinod Polimera authored
Add new helper functions, drm_atomic_get_old_crtc_for_encoder and drm_atomic_get_new_crtc_for_encoder to retrieve the corresponding crtc for the encoder. Signed-off-by:
-
- 12 Mar, 2023 12 commits
-
-
Linus Torvalds authored
-
Hector Martin authored
This reverts part of commit 015b8cc5 ("wifi: cfg80211: Fix use after free for wext") This commit broke WPA offload by unconditionally clearing the crypto modes for non-WEP connections. Drop that part of the patch. Signed-off-by:
Hector Martin <marcan@marcan.st> Reported-by:
Ilya <me@0upti.me> Reported-and-tested-by:
Janne Grunau <j@jannau.net> Reviewed-by:
Eric Curtin <ecurtin@redhat.com> Fixes: 015b8cc5 ("wifi: cfg80211: Fix use after free for wext") Cc: stable@kernel.org Link: https://lore.kernel.org/linux-wireless/ZAx0TWRBlGfv7pNl@kroah.com/T/#m11e6e0915ab8fa19ce8bc9695ab288c0fe018edfSigned-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmddLinus Torvalds authored
Pull tpm fixes from Jarkko Sakkinen: "Two additional bug fixes for v6.3" * tag 'tpm-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: tpm: disable hwrng for fTPM on some AMD designs tpm/eventlog: Don't abort tpm_read_log on faulty ACPI address
-
Mario Limonciello authored
AMD has issued an advisory indicating that having fTPM enabled in BIOS can cause "stuttering" in the OS. This issue has been fixed in newer versions of the fTPM firmware, but it's up to system designers to decide whether to distribute it. This issue has existed for a while, but is more prevalent starting with kernel 6.1 because commit b006c439 ("hwrng: core - start hwrng kthread also for untrusted sources") started to use the fTPM for hwrng by default. However, all uses of /dev/hwrng result in unacceptable stuttering. So, simply disable registration of the defective hwrng when detecting these faulty fTPM versions. As this is caused by faulty firmware, it is plausible that such a problem could also be reproduced by other TPM interactions, but this hasn't been shown by any user's testing or reports. It is hypothesized to be triggered more frequently by the use of the RNG because userspace software will fetch random numbers regularly. Intentionally continue to register other TPM functionality so that users that rely upon PCR measurements or any storage of data will still have access to it. If it's found later that another TPM functionality is exacerbating this problem a module parameter it can be turned off entirely and a module parameter can be introduced to allow users who rely upon fTPM functionality to turn it on even though this problem is present. Link: https://www.amd.com/en/support/kb/faq/pa-410 Link: https://bugzilla.kernel.org/show_bug.cgi?id=216989 Link: https://lore.kernel.org/all/20230209153120.261904-1-Jason@zx2c4.com/ Fixes: b006c439 ("hwrng: core - start hwrng kthread also for untrusted sources") Cc: stable@vger.kernel.org Cc: Jarkko Sakkinen <jarkko@kernel.org> Cc: Thorsten Leemhuis <regressions@leemhuis.info> Cc: James Bottomley <James.Bottomley@hansenpartnership.com> Tested-by: reach622@mailcuk.com Tested-by:
Bell <1138267643@qq.com> Co-developed-by:
Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
Mario Limonciello <mario.limonciello@amd.com> Reviewed-by:
Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by:
-
Morten Linderud authored
tpm_read_log_acpi() should return -ENODEV when no eventlog from the ACPI table is found. If the firmware vendor includes an invalid log address we are unable to map from the ACPI memory and tpm_read_log() returns -EIO which would abort discovery of the eventlog. Change the return value from -EIO to -ENODEV when acpi_os_map_iomem() fails to map the event log. The following hardware was used to test this issue: Framework Laptop (Pre-production) BIOS: INSYDE Corp, Revision: 3.2 TPM Device: NTC, Firmware Revision: 7.2 Dump of the faulty ACPI TPM2 table: [000h 0000 4] Signature : "TPM2" [Trusted Platform Module hardware interface Table] [004h 0004 4] Table Length : 0000004C [008h 0008 1] Revision : 04 [009h 0009 1] Checksum : 2B [00Ah 0010 6] Oem ID : "INSYDE" [010h 0016 8] Oem Table ID : "TGL-ULT" [018h 0024 4] Oem Revision : 00000002 [01Ch 0028 4] Asl Compiler ID : "ACPI" [020h 0032 4] Asl Compiler Revision : 00040000 [024h 0036 2] Platform Class : 0000 [026h 0038 2] Reserved : 0000 [028h 0040 8] Control Address : 0000000000000000 [030h 0048 4] Start Method : 06 [Memory Mapped I/O] [034h 0052 12] Method Parameters : 00 00 00 00 00 00 00 00 00 00 00 00 [040h 0064 4] Minimum Log Length : 00010000 [044h 0068 8] Log Address : 000000004053D000 Fixes: 0cf577a0 ("tpm: Fix handling of missing event log") Tested-by:Erkki Eilonen <erkki@bearmetal.eu> Signed-off-by:
Morten Linderud <morten@linderud.pw> Reviewed-by:
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs fixes from Darrick Wong: - Fix a crash if mount time quotacheck fails when there are inodes queued for garbage collection. - Fix an off by one error when discarding folios after writeback failure. * tag 'xfs-6.3-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: fix off-by-one-block in xfs_discard_folio() xfs: quotacheck failure can race with background inode inactivation
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging driver fixes and removal from Greg KH: "Here are four small staging driver fixes, and one big staging driver deletion for 6.3-rc2. The fixes are: - rtl8192e driver fixes for where the driver was attempting to execute various programs directly from the disk for unknown reasons - rtl8723bs driver fixes for issues found by Hans in testing The deleted driver is the removal of the r8188eu wireless driver as now in 6.3-rc1 we have a "real" wifi driver for one that includes support for many many more devices than this old driver did. So it's time to remove it as it is no longer needed. The maintainers of this driver all have acked its removal. Many thanks to them over the years for working to clean it up and keep it working while the real driver was being developed. All of these have been in linux-next this week with no reported problems" * tag 'staging-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: r8188eu: delete driver staging: rtl8723bs: Pass correct parameters to cfg80211_get_bss() staging: rtl8723bs: Fix key-store index handling staging: rtl8192e: Remove call_usermodehelper starting RadioPower.sh staging: rtl8192e: Remove function ..dm_check_ac_dc_power calling a script -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fix from Borislav Petkov: "A single erratum fix for AMD machines: - Disable XSAVES on AMD Zen1 and Zen2 machines due to an erratum. No impact to anything as those machines will fallback to XSAVEC which is equivalent there" * tag 'x86_urgent_for_v6.3_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/CPU/AMD: Disable XSAVES on AMD family 0x17 -
Linus Torvalds authored
Pull clone3 fix from Christian Brauner: "A simple fix for the clone3() system call. The CLONE_NEWTIME allows the creation of time namespaces. The flag reuses a bit from the CSIGNAL bits that are used in the legacy clone() system call to set the signal that gets sent to the parent after the child exits. The clone3() system call doesn't rely on CSIGNAL anymore as it uses a dedicated .exit_signal field in struct clone_args. So we blocked all CSIGNAL bits in clone3_args_valid(). When CLONE_NEWTIME was introduced and reused a CSIGNAL bit we forgot to adapt clone3_args_valid() causing CLONE_NEWTIME with clone3() to be rejected. Fix this" * tag 'kernel.fork.v6.3-rc2' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux: selftests/clone3: test clone3 with CLONE_NEWTIME fork: allow CLONE_NEWTIME in clone3 flags
-
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmappingLinus Torvalds authored
Pull vfs fixes from Christian Brauner: - When allocating pages for a watch queue failed, we didn't return an error causing userspace to proceed even though all subsequent notifcations would be lost. Make sure to return an error. - Fix a misformed tree entry for the idmapping maintainers entry. - When setting file leases from an idmapped mount via generic_setlease() we need to take the idmapping into account otherwise taking a lease would fail from an idmapped mount. - Remove two redundant assignments, one in splice code and the other in locks code, that static checkers complained about. * tag 'vfs.misc.v6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping: filelocks: use mount idmapping for setlease permission check fs/locks: Remove redundant assignment to cmd splice: Remove redundant assignment to ret MAINTAINERS: repair a malformed T: entry in IDMAPPED MOUNTS watch_queue: fix IOC_WATCH_QUEUE_SET_SIZE alloc error paths
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fixes from Ted Ts'o: "Bug fixes and regressions for ext4, the most serious of which is a potential deadlock during directory renames that was introduced during the merge window discovered by a combination of syzbot and lockdep" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: zero i_disksize when initializing the bootloader inode ext4: make sure fs error flag setted before clear journal error ext4: commit super block if fs record error when journal record without error ext4, jbd2: add an optimized bmap for the journal inode ext4: fix WARNING in ext4_update_inline_data ext4: move where set the MAY_INLINE_DATA flag is set ext4: Fix deadlock during directory rename ext4: Fix comment about the 64BIT feature docs: ext4: modify the group desc size to 64 ext4: fix another off-by-one fsmap error on 1k block filesystems ext4: fix RENAME_WHITEOUT handling for inline directories ext4: make kobj_type structures constant ext4: fix cgroup writeback accounting with fs-layer encryption
-
Linus Torvalds authored
The cpumask_check() was unnecessarily tight, and causes problems for the users of cpumask_next(). We have a number of users that take the previous return value of one of the bit scanning functions and subtract one to keep it in "range". But since the scanning functions end up returning up to 'small_cpumask_bits' instead of the tighter 'nr_cpumask_bits', the range really needs to be using that widened form. [ This "previous-1" behavior is also the reason we have all those comments about /* -1 is a legal arg here. */ and separate checks for that being ok. So we could have just made "small_cpumask_bits-1" be a similar special "don't check this" value. Tetsuo Handa even suggested a patch that only does that for cpumask_next(), since that seems to be the only actual case that triggers, but that all makes it even _more_ magical and special. So just relax the check ] One example of this kind of pattern being the 'c_start()' function in arch/x86/kernel/cpu/proc.c, but also duplicated in various forms on other architectures. Reported-by: syzbot+96cae094d90877641f32@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=96cae094d90877641f32Reported-by:
Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Link: https://lore.kernel.org/lkml/c1f4cc16-feea-b83c-82cf-1a1f007b7eb9@I-love.SAKURA.ne.jp/ Fixes: 596ff4a0 ("cpumask: re-introduce constant-sized cpumask optimizations") Signed-off-by:
-
- 11 Mar, 2023 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c updates from Wolfram Sang: "This marks the end of a transition to let I2C have the same probe semantics as other subsystems. Uwe took care that no drivers in the current tree nor in -next use the deprecated .probe call. So, it is a good time to switch to the new, standard semantics now. There is also a regression fix: - regression fix for the notifier handling of the I2C core - final coversions of drivers away from deprecated .probe - make .probe_new the standard probe and convert I2C core to use it * tag 'i2c-for-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: dev: Fix bus callback return values i2c: Convert drivers to new .probe() callback i2c: mux: Convert all drivers to new .probe() callback i2c: Switch .probe() to not take an id parameter media: i2c: ov2685: convert to i2c's .probe_new() media: i2c: ov5695: convert to i2c's .probe_new() w1: ds2482: Convert to i2c's .probe_new() serial: sc16is7xx: Convert to i2c's .probe_new() mtd: maps: pismo: Convert to i2c's .probe_new() misc: ad525x_dpot-i2c: Convert to i2c's .probe_new()
-
Richard Weinberger authored
Switching to BLK_MQ_F_BLOCKING wrongly removed the call to blk_mq_end_request(). Add it back to have our IOs finished Fixes: 91cc8fbc ("ubi: block: set BLK_MQ_F_BLOCKING") Analyzed-by:
Daniel Palmer <daniel@0x0f.com> Link: https://lore.kernel.org/linux-mtd/CAHk-=wi29bbBNh3RqJKu3PxzpjDN5D5K17gEVtXrb7-6bfrnMQ@mail.gmail.com/Signed-off-by:
Richard Weinberger <richard@nod.at> Reviewed-by:
Christoph Hellwig <hch@lst.de> Tested-by:
-
Zhihao Cheng authored
If the boot loader inode has never been used before, the EXT4_IOC_SWAP_BOOT inode will initialize it, including setting the i_size to 0. However, if the "never before used" boot loader has a non-zero i_size, then i_disksize will be non-zero, and the inconsistency between i_size and i_disksize can trigger a kernel warning: WARNING: CPU: 0 PID: 2580 at fs/ext4/file.c:319 CPU: 0 PID: 2580 Comm: bb Not tainted 6.3.0-rc1-00004-g703695902cfa RIP: 0010:ext4_file_write_iter+0xbc7/0xd10 Call Trace: vfs_write+0x3b1/0x5c0 ksys_write+0x77/0x160 __x64_sys_write+0x22/0x30 do_syscall_64+0x39/0x80 Reproducer: 1. create corrupted image and mount it: mke2fs -t ext4 /tmp/foo.img 200 debugfs -wR "sif <5> size 25700" /tmp/foo.img mount -t ext4 /tmp/foo.img /mnt cd /mnt echo 123 > file 2. Run the reproducer program: posix_memalign(&buf, 1024, 1024) fd = open("file", O_RDWR | O_DIRECT); ioctl(fd, EXT4_IOC_SWAP_BOOT); write(fd, buf, 1024); Fix this by setting i_disksize as well as i_size to zero when initiaizing the boot loader inode. Link: https://bugzilla.kernel.org/show_bug.cgi?id=217159 Cc: stable@kernel.org Signed-off-by:Zhihao Cheng <chengzhihao1@huawei.com> Link: https://lore.kernel.org/r/20230308032643.641113-1-chengzhihao1@huawei.comSigned-off-by:
Theodore Ts'o <tytso@mit.edu>
-
