- 26 Oct, 2020 10 commits
-
-
Amit Cohen authored
Each EMAD transaction stores the skb used to issue the EMAD request ('trans->tx_skb') so that the request could be retried in case of a timeout. The skb can be freed when a corresponding response is received or as part of the retry logic (e.g., failed retransmit, exceeded maximum number of retries). The two tasks (i.e., response processing and retransmits) are synchronized by the atomic 'trans->active' field which ensures that responses to inactive transactions are ignored. In case of a failed retransmit the transaction is finished and all of its resources are freed. However, the current code does not mark it as inactive. Syzkaller was able to hit a race condition in which a concurrent response is processed while the transaction's resources are being freed, resulting in a use-after-free [1]. Fix the issue by making sure to mark the transaction as inactive after a failed retransmit and free its resources only if a concurrent task did not already do that. [1] BUG: KASAN: use-after-free in consume_skb+0x30/0x370 net/core/skbuff.c:833 Read of size 4 at addr ffff88804f570494 by task syz-executor.0/1004 CPU: 0 PID: 1004 Comm: syz-executor.0 Not tainted 5.8.0-rc7+ #68 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xf6/0x16e lib/dump_stack.c:118 print_address_description.constprop.0+0x1c/0x250 mm/kasan/report.c:383 __kasan_report mm/kasan/report.c:513 [inline] kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530 check_memory_region_inline mm/kasan/generic.c:186 [inline] check_memory_region+0x14e/0x1b0 mm/kasan/generic.c:192 instrument_atomic_read include/linux/instrumented.h:56 [inline] atomic_read include/asm-generic/atomic-instrumented.h:27 [inline] refcount_read include/linux/refcount.h:147 [inline] skb_unref include/linux/skbuff.h:1044 [inline] consume_skb+0x30/0x370 net/core/skbuff.c:833 mlxsw_emad_trans_finish+0x64/0x1c0 drivers/net/ethernet/mellanox/mlxsw/core.c:592 mlxsw_emad_process_response drivers/net/ethernet/mellanox/mlxsw/core.c:651 [inline] mlxsw_emad_rx_listener_func+0x5c9/0xac0 drivers/net/ethernet/mellanox/mlxsw/core.c:672 mlxsw_core_skb_receive+0x4df/0x770 drivers/net/ethernet/mellanox/mlxsw/core.c:2063 mlxsw_pci_cqe_rdq_handle drivers/net/ethernet/mellanox/mlxsw/pci.c:595 [inline] mlxsw_pci_cq_tasklet+0x12a6/0x2520 drivers/net/ethernet/mellanox/mlxsw/pci.c:651 tasklet_action_common.isra.0+0x13f/0x3e0 kernel/softirq.c:550 __do_softirq+0x223/0x964 kernel/softirq.c:292 asm_call_on_stack+0x12/0x20 arch/x86/entry/entry_64.S:711 Allocated by task 1006: save_stack+0x1b/0x40 mm/kasan/common.c:48 set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc mm/kasan/common.c:494 [inline] __kasan_kmalloc.constprop.0+0xc2/0xd0 mm/kasan/common.c:467 slab_post_alloc_hook mm/slab.h:586 [inline] slab_alloc_node mm/slub.c:2824 [inline] slab_alloc mm/slub.c:2832 [inline] kmem_cache_alloc+0xcd/0x2e0 mm/slub.c:2837 __build_skb+0x21/0x60 net/core/skbuff.c:311 __netdev_alloc_skb+0x1e2/0x360 net/core/skbuff.c:464 netdev_alloc_skb include/linux/skbuff.h:2810 [inline] mlxsw_emad_alloc drivers/net/ethernet/mellanox/mlxsw/core.c:756 [inline] mlxsw_emad_reg_access drivers/net/ethernet/mellanox/mlxsw/core.c:787 [inline] mlxsw_core_reg_access_emad+0x1ab/0x1420 drivers/net/ethernet/mellanox/mlxsw/core.c:1817 mlxsw_reg_trans_query+0x39/0x50 drivers/net/ethernet/mellanox/mlxsw/core.c:1831 mlxsw_sp_sb_pm_occ_clear drivers/net/ethernet/mellanox/mlxsw/spectrum_buffers.c:260 [inline] mlxsw_sp_sb_occ_max_clear+0xbff/0x10a0 drivers/net/ethernet/mellanox/mlxsw/spectrum_buffers.c:1365 mlxsw_devlink_sb_occ_max_clear+0x76/0xb0 drivers/net/ethernet/mellanox/mlxsw/core.c:1037 devlink_nl_cmd_sb_occ_max_clear_doit+0x1ec/0x280 net/core/devlink.c:1765 genl_family_rcv_msg_doit net/netlink/genetlink.c:669 [inline] genl_family_rcv_msg net/netlink/genetlink.c:714 [inline] genl_rcv_msg+0x617/0x980 net/netlink/genetlink.c:731 netlink_rcv_skb+0x152/0x440 net/netlink/af_netlink.c:2470 genl_rcv+0x24/0x40 net/netlink/genetlink.c:742 netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline] netlink_unicast+0x53a/0x750 net/netlink/af_netlink.c:1330 netlink_sendmsg+0x850/0xd90 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg+0x150/0x190 net/socket.c:671 ____sys_sendmsg+0x6d8/0x840 net/socket.c:2359 ___sys_sendmsg+0xff/0x170 net/socket.c:2413 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2446 do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:384 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 73: save_stack+0x1b/0x40 mm/kasan/common.c:48 set_track mm/kasan/common.c:56 [inline] kasan_set_free_info mm/kasan/common.c:316 [inline] __kasan_slab_free+0x12c/0x170 mm/kasan/common.c:455 slab_free_hook mm/slub.c:1474 [inline] slab_free_freelist_hook mm/slub.c:1507 [inline] slab_free mm/slub.c:3072 [inline] kmem_cache_free+0xbe/0x380 mm/slub.c:3088 kfree_skbmem net/core/skbuff.c:622 [inline] kfree_skbmem+0xef/0x1b0 net/core/skbuff.c:616 __kfree_skb net/core/skbuff.c:679 [inline] consume_skb net/core/skbuff.c:837 [inline] consume_skb+0xe1/0x370 net/core/skbuff.c:831 mlxsw_emad_trans_finish+0x64/0x1c0 drivers/net/ethernet/mellanox/mlxsw/core.c:592 mlxsw_emad_transmit_retry.isra.0+0x9d/0xc0 drivers/net/ethernet/mellanox/mlxsw/core.c:613 mlxsw_emad_trans_timeout_work+0x43/0x50 drivers/net/ethernet/mellanox/mlxsw/core.c:625 process_one_work+0xa3e/0x17a0 kernel/workqueue.c:2269 worker_thread+0x9e/0x1050 kernel/workqueue.c:2415 kthread+0x355/0x470 kernel/kthread.c:291 ret_from_fork+0x22/0x30 arch/x86/entry/entry_64.S:293 The buggy address belongs to the object at ffff88804f5703c0 which belongs to the cache skbuff_head_cache of size 224 The buggy address is located 212 bytes inside of 224-byte region [ffff88804f5703c0, ffff88804f5704a0) The buggy address belongs to the page: page:ffffea00013d5c00 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x100000000000200(slab) raw: 0100000000000200 dead000000000100 dead000000000122 ffff88806c625400 raw: 0000000000000000 00000000000c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88804f570380: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff88804f570400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff88804f570480: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff88804f570500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff88804f570580: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc Fixes: caf7297e ("mlxsw: core: Introduce support for asynchronous EMAD register access") Signed-off-by:Amit Cohen <amcohen@nvidia.com> Reviewed-by:
Jiri Pirko <jiri@nvidia.com> Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Ido Schimmel authored
Free the devlink instance during the teardown sequence in the non-reload case to avoid the following memory leak. unreferenced object 0xffff888232895000 (size 2048): comm "modprobe", pid 1073, jiffies 4295568857 (age 164.871s) hex dump (first 32 bytes): 00 01 00 00 00 00 ad de 22 01 00 00 00 00 ad de ........"....... 10 50 89 32 82 88 ff ff 10 50 89 32 82 88 ff ff .P.2.....P.2.... backtrace: [<00000000c704e9a6>] __kmalloc+0x13a/0x2a0 [<00000000ee30129d>] devlink_alloc+0xff/0x760 [<0000000092ab3e5d>] 0xffffffffa042e5b0 [<000000004f3f8a31>] 0xffffffffa042f6ad [<0000000092800b4b>] 0xffffffffa0491df3 [<00000000c4843903>] local_pci_probe+0xcb/0x170 [<000000006993ded7>] pci_device_probe+0x2c2/0x4e0 [<00000000a8e0de75>] really_probe+0x2c5/0xf90 [<00000000d42ba75d>] driver_probe_device+0x1eb/0x340 [<00000000bcc95e05>] device_driver_attach+0x294/0x300 [<000000000e2bc177>] __driver_attach+0x167/0x2f0 [<000000007d44cd6e>] bus_for_each_dev+0x148/0x1f0 [<000000003cd5a91e>] driver_attach+0x45/0x60 [<000000000041ce51>] bus_add_driver+0x3b8/0x720 [<00000000f5215476>] driver_register+0x230/0x4e0 [<00000000d79356f5>] __pci_register_driver+0x190/0x200 Fixes: a22712a9 ("mlxsw: core: Fix devlink unregister flow") Signed-off-by:Vadim Pasternak <vadimp@nvidia.com> Tested-by:
Oleksandr Shamray <oleksandrs@nvidia.com> Signed-off-by:
-
Amit Cohen authored
During port creation the driver instructs the device to advertise all the supported link modes queried from the device. Since cited commit not all the link modes supported by the device are supported by the driver. This can result in the device negotiating a link mode that is not recognized by the driver causing ethtool to show an unsupported speed: $ ethtool swp1 ... Speed: Unknown! This is especially problematic when the netdev is enslaved to a bond, as the bond driver uses unknown speed as an indication that the link is down: [13048.900895] net_ratelimit: 86 callbacks suppressed [13048.900902] t_bond0: (slave swp52): failed to get link speed/duplex [13048.912160] t_bond0: (slave swp49): failed to get link speed/duplex Fix this by making sure that only link modes that are supported by both the device and the driver are advertised. Fixes: b97cd891 ("mlxsw: Remove 56G speed support") Signed-off-by:
-
Jakub Kicinski authored
Karsten Graul says: ==================== net/smc: fixes 2020-10-23 Patch 1 fixes a potential null pointer dereference. Patch 2 takes care of a suppressed return code and patch 3 corrects the system EID in the ISM driver. ==================== Link: https://lore.kernel.org/r/20201023184830.59548-1-kgraul@linux.ibm.comSigned-off-by:
-
Karsten Graul authored
The system EID that is defined by the ISM driver is not correct. Using an incorrect system EID allows to communicate with remote Linux systems that use the same incorrect system EID, but when it comes to interoperability with other operating systems then the system EIDs do never match which prevents SMC-Dv2 communication. Using the correct system EID fixes this problem. Fixes: 201091eb ("net/smc: introduce System Enterprise ID (SEID)") Signed-off-by:
Karsten Graul <kgraul@linux.ibm.com> Signed-off-by:
-
Karsten Graul authored
The patch that repaired the invalid return code in smcd_new_buf_create() missed to take care of errno ENOSPC which has a special meaning that no more DMBEs can be registered on the device. Fix that by keeping this errno value during the translation of the return code. Fixes: 6b1bbf94 ("net/smc: fix invalid return code in smcd_new_buf_create()") Signed-off-by:
-
Karsten Graul authored
smc_listen_work() calls smc_listen_decline() on label out_decl, providing the ini pointer variable. But this pointer can still be null when the label out_decl is reached. Fix this by checking the ini variable in smc_listen_work() and call smc_listen_decline() with the result directly. Fixes: a7c9c5f4 ("net/smc: CLC accept / confirm V2") Signed-off-by:
-
Jeff Vander Stoep authored
During __vsock_create() CAP_NET_ADMIN is used to determine if the vsock_sock->trusted should be set to true. This value is used later for determing if a remote connection should be allowed to connect to a restricted VM. Unfortunately, if the caller doesn't have CAP_NET_ADMIN, an audit message such as an selinux denial is generated even if the caller does not want a trusted socket. Logging errors on success is confusing. To avoid this, switch the capable(CAP_NET_ADMIN) check to the noaudit version. Reported-by:
Roman Kiryanov <rkir@google.com> https://android-review.googlesource.com/c/device/generic/goldfish/+/1468545/Signed-off-by:
Jeff Vander Stoep <jeffv@google.com> Reviewed-by:
James Morris <jamorris@linux.microsoft.com> Link: https://lore.kernel.org/r/20201023143757.377574-1-jeffv@google.comSigned-off-by:
-
Raju Rangoju authored
The current code sets up the filter action field before rewrites are set up. When the action 'switch' is used with rewrites, this may result in initial few packets that get switched out don't have rewrites applied on them. So, make sure filter action is set up along with rewrites or only after everything else is set up for rewrites. Fixes: 12b276fb ("cxgb4: add support to create hash filters") Signed-off-by:
Raju Rangoju <rajur@chelsio.com> Link: https://lore.kernel.org/r/20201023115852.18262-1-rajur@chelsio.comSigned-off-by:
-
Dan Carpenter authored
Smatch complains that "ret" might be uninitialized if we don't enter the loop. We do always enter the loop so it's a false positive, but it's cleaner to just return a literal zero and that silences the warning as well. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20201023112212.GA282278@mwandaSigned-off-by:
-
- 24 Oct, 2020 8 commits
-
-
Arjun Roy authored
With SO_RCVLOWAT, under memory pressure, it is possible to enter a state where: 1. We have not received enough bytes to satisfy SO_RCVLOWAT. 2. We have not entered buffer pressure (see tcp_rmem_pressure()). 3. But, we do not have enough buffer space to accept more packets. In this case, we advertise 0 rwnd (due to #3) but the application does not drain the receive queue (no wakeup because of #1 and #2) so the flow stalls. Modify the heuristic for SO_RCVLOWAT so that, if we are advertising rwnd<=rcv_mss, force a wakeup to prevent a stall. Without this patch, setting tcp_rmem to 6143 and disabling TCP autotune causes a stalled flow. With this patch, no stall occurs. This is with RPC-style traffic with large messages. Fixes: 03f45c88 ("tcp: avoid extra wakeups for SO_RCVLOWAT users") Signed-off-by:
Arjun Roy <arjunroy@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20201023184709.217614-1-arjunroy.kdev@gmail.comSigned-off-by:
-
Michael Ellerman authored
Clang warns about the extra parentheses in this comparison: drivers/net/ethernet/freescale/ucc_geth.c:1361:28: warning: equality comparison with extraneous parentheses if ((ugeth->phy_interface == PHY_INTERFACE_MODE_SGMII)) ~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~ It seems clear the intent here is to do a comparison not an assignment, so drop the extra parentheses to avoid any confusion. Signed-off-by:Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201023033236.3296988-1-mpe@ellerman.id.auSigned-off-by:
-
Jakub Kicinski authored
Shannon Nelson says: ==================== ionic: memory usage fixes This patchset addresses some memory leaks and incorrect io reads. ==================== Link: https://lore.kernel.org/r/20201022235531.65956-1-snelson@pensando.ioSigned-off-by:
-
Shannon Nelson authored
The sentinel descriptor entry was getting missed in the traverse of the ring from head to tail, so change to a loop of 0 to the end. Fixes: f1d2e894 ("ionic: use index not pointer for queue tracking") Signed-off-by:
Shannon Nelson <snelson@pensando.io> Signed-off-by:
-
Shannon Nelson authored
Kmemleak pointed out to us that ionic_rx_flush() is sending skbs into napi_gro_XXX with a disabled napi context, and these end up getting lost and leaked. We can safely remove the flush. Fixes: 0f3154e6 ("ionic: Add Tx and Rx handling") Signed-off-by:
-
Shannon Nelson authored
The sparse complaints around the static_asserts were obscuring more useful complaints. So, don't check the static_asserts, and fix the remaining sparse complaints. Signed-off-by:
-
Vinay Kumar Yadav authored
chtls_pt_recvmsg() receives a skb with tls header and subsequent skb with data, need to finalize the data copy whenever next skb with tls header is available. but here current tls header is overwritten by next available tls header, ends up corrupting user buffer data. fixing it by finalizing current record whenever next skb contains tls header. v1->v2: - Improved commit message. Fixes: 17a7d24a ("crypto: chtls - generic handling of data and hdr") Signed-off-by:
Vinay Kumar Yadav <vinay.yadav@chelsio.com> Link: https://lore.kernel.org/r/20201022190556.21308-1-vinay.yadav@chelsio.comSigned-off-by:
-
Alex Elder authored
IPA transactions describe actions to be performed by the IPA hardware. Three cases use IPA transactions: transmitting a socket buffer; providing a page to receive packet data; and issuing an IPA immediate command. An IPA transaction contains a scatter/gather list (SGL) to hold the set of actions to be performed. We map buffers in the SGL for DMA at the time they are added to the transaction. For skb TX transactions, we fill the SGL with a call to skb_to_sgvec(). Page RX transactions involve a single page pointer, and that is recorded in the SGL with sg_set_page(). In both of these cases we then map the SGL for DMA with a call to dma_map_sg(). Immediate commands are different. The payload for an immediate command comes from a region of coherent DMA memory, which must *not* be mapped for DMA. For that reason, gsi_trans_cmd_add() sort of hand-crafts each SGL entry added to a command transaction. This patch fixes a problem with the code that crafts the SGL entry for an immediate command. Previously a portion of the SGL entry was updated using sg_set_buf(). However this is not valid because it includes a call to virt_to_page() on the buffer, but the command buffer pointer is not a linear address. Since we never actually map the SGL for command transactions, there are very few fields in the SGL we need to fill. Specifically, we only need to record the DMA address and the length, so they can be used by __gsi_trans_commit() to fill a TRE. We additionally need to preserve the SGL flags so for_each_sg() still works. For that we can simply assign a null page pointer for command SGL entries. Fixes: 9dd441e4 ("soc: qcom: ipa: GSI transactions") Reported-by:
Stephen Boyd <swboyd@chromium.org> Tested-by:
Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20201022010029.11877-1-elder@linaro.orgSigned-off-by:
-
- 23 Oct, 2020 22 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Cross-tree/merge window issues: - rtl8150: don't incorrectly assign random MAC addresses; fix late in the 5.9 cycle started depending on a return code from a function which changed with the 5.10 PR from the usb subsystem Current release regressions: - Revert "virtio-net: ethtool configurable RXCSUM", it was causing crashes at probe when control vq was not negotiated/available Previous release regressions: - ixgbe: fix probing of multi-port 10 Gigabit Intel NICs with an MDIO bus, only first device would be probed correctly - nexthop: Fix performance regression in nexthop deletion by effectively switching from recently added synchronize_rcu() to synchronize_rcu_expedited() - netsec: ignore 'phy-mode' device property on ACPI systems; the property is not populated correctly by the firmware, but firmware configures the PHY so just keep boot settings Previous releases - always broken: - tcp: fix to update snd_wl1 in bulk receiver fast path, addressing bulk transfers getting "stuck" - icmp: randomize the global rate limiter to prevent attackers from getting useful signal - r8169: fix operation under forced interrupt threading, make the driver always use hard irqs, even on RT, given the handler is light and only wants to schedule napi (and do so through a _irqoff() variant, preferably) - bpf: Enforce pointer id generation for all may-be-null register type to avoid pointers erroneously getting marked as null-checked - tipc: re-configure queue limit for broadcast link - net/sched: act_tunnel_key: fix OOB write in case of IPv6 ERSPAN tunnels - fix various issues in chelsio inline tls driver Misc: - bpf: improve just-added bpf_redirect_neigh() helper api to support supplying nexthop by the caller - in case BPF program has already done a lookup we can avoid doing another one - remove unnecessary break statements - make MCTCP not select IPV6, but rather depend on it" * tag 'net-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits) tcp: fix to update snd_wl1 in bulk receiver fast path net: Properly typecast int values to set sk_max_pacing_rate netfilter: nf_fwd_netdev: clear timestamp in forwarding path ibmvnic: save changed mac address to adapter->mac_addr selftests: mptcp: depends on built-in IPv6 Revert "virtio-net: ethtool configurable RXCSUM" rtnetlink: fix data overflow in rtnl_calcit() net: ethernet: mtk-star-emac: select REGMAP_MMIO net: hdlc_raw_eth: Clear the IFF_TX_SKB_SHARING flag after calling ether_setup net: hdlc: In hdlc_rcv, check to make sure dev is an HDLC device bpf, libbpf: Guard bpf inline asm from bpf_tail_call_static bpf, selftests: Extend test_tc_redirect to use modified bpf_redirect_neigh() bpf: Fix bpf_redirect_neigh helper api to support supplying nexthop mptcp: depends on IPV6 but not as a module sfc: move initialisation of efx->filter_sem to efx_init_struct() mpls: load mpls_gso after mpls_iptunnel net/sched: act_tunnel_key: fix OOB write in case of IPv6 ERSPAN tunnels net/sched: act_gate: Unlock ->tcfa_lock in tc_setup_flow_action() net: dsa: bcm_sf2: make const array static, makes object smaller mptcp: MPTCP_IPV6 should depend on IPV6 instead of selecting it ... -
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2Linus Torvalds authored
Pull gfs2 updates from Andreas Gruenbacher: - Use iomap for non-journaled buffered I/O. This largely eliminates buffer heads on filesystems where the block size matches the page size. Many thanks to Christoph Hellwig for this patch! - Fixes for some more journaled data filesystem bugs, found by running xfstests with data journaling on for all files (chattr +j $MNT) (Bob Peterson) - gfs2_evict_inode refactoring (Bob Peterson) - Use the statfs data in the journal during recovery instead of reading it in from the local statfs inodes (Abhi Das) - Several other minor fixes by various people * tag 'gfs2-for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: (30 commits) gfs2: Recover statfs info in journal head gfs2: lookup local statfs inodes prior to journal recovery gfs2: Add fields for statfs info in struct gfs2_log_header_host gfs2: Ignore subsequent errors after withdraw in rgrp_go_sync gfs2: Eliminate gl_vm gfs2: Only access gl_delete for iopen glocks gfs2: Fix comments to glock_hash_walk gfs2: eliminate GLF_QUEUED flag in favor of list_empty(gl_holders) gfs2: Ignore journal log writes for jdata holes gfs2: simplify gfs2_block_map gfs2: Only set PageChecked if we have a transaction gfs2: don't lock sd_ail_lock in gfs2_releasepage gfs2: make gfs2_ail1_empty_one return the count of active items gfs2: Wipe jdata and ail1 in gfs2_journal_wipe, formerly gfs2_meta_wipe gfs2: enhance log_blocks trace point to show log blocks free gfs2: add missing log_blocks trace points in gfs2_write_revokes gfs2: rename gfs2_write_full_page to gfs2_write_jdata_page, remove parm gfs2: add validation checks for size of superblock gfs2: use-after-free in sysfs deregistration gfs2: Fix NULL pointer dereference in gfs2_rgrp_dump ...
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs updates from Steve French: - add support for recognizing special file types (char/block/fifo/ symlink) for files created by Linux on WSL (a format we plan to move to as the default for creating special files on Linux, as it has advantages over the other current option, the SFU format) in readdir. - fix double queries to root directory when directory leases not supported (e.g. Samba) - fix querying mode bits (modefromsid mount option) for special file types - stronger encryption (gcm256), disabled by default until tested more broadly - allow querying owner when server reports 'well known SID' on query dir with SMB3.1.1 POSIX extensions * tag '5.10-rc-smb3-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6: (30 commits) SMB3: add support for recognizing WSL reparse tags cifs: remove bogus debug code smb3.1.1: fix typo in compression flag cifs: move smb version mount options into fs_context.c cifs: move cache mount options to fs_context.ch cifs: move security mount options into fs_context.ch cifs: add files to host new mount api smb3: do not try to cache root directory if dir leases not supported smb3: fix stat when special device file and mounted with modefromsid cifs: Print the address and port we are connecting to in generic_ip_connect() SMB3: Resolve data corruption of TCP server info fields cifs: make const array static, makes object smaller SMB3.1.1: Fix ids returned in POSIX query dir smb3: add dynamic trace point to trace when credits obtained smb3.1.1: do not fail if no encryption required but server doesn't support it cifs: Return the error from crypt_message when enc/dec key not found. smb3.1.1: set gcm256 when requested smb3.1.1: rename nonces used for GCM and CCM encryption smb3.1.1: print warning if server does not support requested encryption type smb3.1.1: add new module load parm enable_gcm_256 ...
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull clone/dedupe/remap code refactoring from Darrick Wong: "Move the generic file range remap (aka reflink and dedupe) functions out of mm/filemap.c and fs/read_write.c and into fs/remap_range.c to reduce clutter in the first two files" * tag 'vfs-5.10-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: vfs: move the generic write and copy checks out of mm vfs: move the remap range helpers to remap_range.c vfs: move generic_remap_checks out of mm
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM updates from Paolo Bonzini: "For x86, there is a new alternative and (in the future) more scalable implementation of extended page tables that does not need a reverse map from guest physical addresses to host physical addresses. For now it is disabled by default because it is still lacking a few of the existing MMU's bells and whistles. However it is a very solid piece of work and it is already available for people to hammer on it. Other updates: ARM: - New page table code for both hypervisor and guest stage-2 - Introduction of a new EL2-private host context - Allow EL2 to have its own private per-CPU variables - Support of PMU event filtering - Complete rework of the Spectre mitigation PPC: - Fix for running nested guests with in-kernel IRQ chip - Fix race condition causing occasional host hard lockup - Minor cleanups and bugfixes x86: - allow trapping unknown MSRs to userspace - allow userspace to force #GP on specific MSRs - INVPCID support on AMD - nested AMD cleanup, on demand allocation of nested SVM state - hide PV MSRs and hypercalls for features not enabled in CPUID - new test for MSR_IA32_TSC writes from host and guest - cleanups: MMU, CPUID, shared MSRs - LAPIC latency optimizations ad bugfixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (232 commits) kvm: x86/mmu: NX largepage recovery for TDP MMU kvm: x86/mmu: Don't clear write flooding count for direct roots kvm: x86/mmu: Support MMIO in the TDP MMU kvm: x86/mmu: Support write protection for nesting in tdp MMU kvm: x86/mmu: Support disabling dirty logging for the tdp MMU kvm: x86/mmu: Support dirty logging for the TDP MMU kvm: x86/mmu: Support changed pte notifier in tdp MMU kvm: x86/mmu: Add access tracking for tdp_mmu kvm: x86/mmu: Support invalidate range MMU notifier for TDP MMU kvm: x86/mmu: Allocate struct kvm_mmu_pages for all pages in TDP MMU kvm: x86/mmu: Add TDP MMU PF handler kvm: x86/mmu: Remove disallowed_hugepage_adjust shadow_walk_iterator arg kvm: x86/mmu: Support zapping SPTEs in the TDP MMU KVM: Cache as_id in kvm_memory_slot kvm: x86/mmu: Add functions to handle changed TDP SPTEs kvm: x86/mmu: Allocate and free TDP MMU roots kvm: x86/mmu: Init / Uninit the TDP MMU kvm: x86/mmu: Introduce tdp_iter KVM: mmu: extract spte.h and spte.c KVM: mmu: Separate updating a PTE from kvm_set_pte_rmapp ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds authored
Pull virtio updates from Michael Tsirkin: "vhost, vdpa, and virtio cleanups and fixes A very quiet cycle, no new features" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: MAINTAINERS: add URL for virtio-mem vhost_vdpa: remove unnecessary spin_lock in vhost_vring_call vringh: fix __vringh_iov() when riov and wiov are different vdpa/mlx5: Setup driver only if VIRTIO_CONFIG_S_DRIVER_OK s390: virtio: PV needs VIRTIO I/O device protection virtio: let arch advertise guest's memory access restrictions vhost_vdpa: Fix duplicate included kernel.h vhost: reduce stack usage in log_used virtio-mem: Constify mem_id_table virtio_input: Constify id_table virtio-balloon: Constify id_table vdpa/mlx5: Fix failure to bring link up vdpa/mlx5: Make use of a specific 16 bit endianness API
-
Linus Torvalds authored
Merge tag 'tag-chrome-platform-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux Pull chrome platform updates from Benson Leung: "cros-ec: - Error code cleanup across cros-ec by Guenter - Remove cros_ec_cmd_xfer in favor of cros_ec_cmd_xfer_status cros_ec_typec: - Landed initial USB4 support in typec connector class driver for cros_ec - Role switch bugfix on disconnect, and reordering configuration steps cros_ec_lightbar: - Fix buffer outsize and result for get_lightbar_version misc: - Remove config MFD_CROS_EC, now that transition from MFD is complete - Enable KEY_LEFTMETA in new location on arm based cros-ec-keyboard keymap" * tag 'tag-chrome-platform-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: ARM: dts: cros-ec-keyboard: Add alternate keymap for KEY_LEFTMETA platform/chrome: Use kobj_to_dev() instead of container_of() platform/chrome: cros_ec_proto: Drop cros_ec_cmd_xfer() platform/chrome: cros_ec_proto: Update cros_ec_cmd_xfer() call-sites platform/chrome: Kconfig: Remove the transitional MFD_CROS_EC config platform/chrome: cros_ec_lightbar: Reduce ligthbar get version command platform/chrome: cros_ec_trace: Add fields to command traces platform/chrome: cros_ec_typec: Re-order connector configuration steps platform/chrome: cros_ec_typec: Avoid setting usb role twice during disconnect platform/chrome: cros_ec_typec: Send enum values to usb_role_switch_set_role() platform/chrome: cros_ec_typec: USB4 support pwm: cros-ec: Simplify EC error handling platform/chrome: cros_ec_proto: Convert EC error codes to Linux error codes platform/input: cros_ec: Replace -ENOTSUPP with -ENOPROTOOPT pwm: cros-ec: Accept more error codes from cros_ec_cmd_xfer_status platform/chrome: cros_ec_sysfs: Report range of error codes from EC cros_ec_lightbar: Accept more error codes from cros_ec_cmd_xfer_status iio: cros_ec: Accept -EOPNOTSUPP as 'not supported' error code
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull arch task_work cleanups from Jens Axboe: "Two cleanups that don't fit other categories: - Finally get the task_work_add() cleanup done properly, so we don't have random 0/1/false/true/TWA_SIGNAL confusing use cases. Updates all callers, and also fixes up the documentation for task_work_add(). - While working on some TIF related changes for 5.11, this TIF_NOTIFY_RESUME cleanup fell out of that. Remove some arch duplication for how that is handled" * tag 'arch-cleanup-2020-10-22' of git://git.kernel.dk/linux-block: task_work: cleanup notification modes tracehook: clear TIF_NOTIFY_RESUME in tracehook_notify_resume() -
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arcLinus Torvalds authored
Pull ARC fix from Vineet Gupta: "I found a snafu in perf driver which made it into 5.9-rc4 and the fix should go in now than wait" * tag 'arc-5.10-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: perf: redo the pct irq missing in device-tree handling
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull more arm64 updates from Will Deacon: "A small selection of further arm64 fixes and updates. Most of these are fixes that came in during the merge window, with the exception of the HAVE_MOVE_PMD mremap() speed-up which we discussed back in 2018 and somehow forgot to enable upstream. - Improve performance of Spectre-v2 mitigation on Falkor CPUs (if you're lucky enough to have one) - Select HAVE_MOVE_PMD. This has been shown to improve mremap() performance, which is used heavily by the Android runtime GC, and it seems we forgot to enable this upstream back in 2018. - Ensure linker flags are consistent between LLVM and BFD - Fix stale comment in Spectre mitigation rework - Fix broken copyright header - Fix KASLR randomisation of the linear map - Prevent arm64-specific prctl()s from compat tasks (return -EINVAL)" Link: https://lore.kernel.org/kvmarm/20181108181201.88826-3-joelaf@google.com/ * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: proton-pack: Update comment to reflect new function name arm64: spectre-v2: Favour CPU-specific mitigation at EL2 arm64: link with -z norelro regardless of CONFIG_RELOCATABLE arm64: Fix a broken copyright header in gen_vdso_offsets.sh arm64: mremap speedup - Enable HAVE_MOVE_PMD arm64: mm: use single quantity to represent the PA to VA translation arm64: reject prctl(PR_PAC_RESET_KEYS) on compat tasks -
Abhi Das authored
Apply the outstanding statfs changes in the journal head to the master statfs file. Zero out the local statfs file for good measure. Previously, statfs updates would be read in from the local statfs inode and synced to the master statfs inode during recovery. We now use the statfs updates in the journal head to update the master statfs inode instead of reading in from the local statfs inode. To preserve backward compatibility with kernels that can't do this, we still need to keep the local statfs inode up to date by writing changes to it. At some point in the future, we can do away with the local statfs inodes altogether and keep the statfs changes solely in the journal. Signed-off-by:
Abhi Das <adas@redhat.com> Signed-off-by:
Andreas Gruenbacher <agruenba@redhat.com>
-
Abhi Das authored
We need to lookup the master statfs inode and the local statfs inodes earlier in the mount process (in init_journal) so journal recovery can use them when it attempts to recover the statfs info. We lookup all the local statfs inodes and store them in a linked list to allow a node to recover statfs info for other nodes in the cluster. Signed-off-by:
-
Ben Gardon authored
When KVM maps a largepage backed region at a lower level in order to make it executable (i.e. NX large page shattering), it reduces the TLB performance of that region. In order to avoid making this degradation permanent, KVM must periodically reclaim shattered NX largepages by zapping them and allowing them to be rebuilt in the page fault handler. With this patch, the TDP MMU does not respect KVM's rate limiting on reclaim. It traverses the entire TDP structure every time. This will be addressed in a future patch. Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell machine. This series introduced no new failures. This series can be viewed in Gerrit at: https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538Signed-off-by:
Ben Gardon <bgardon@google.com> Message-Id: <20201014182700.2888246-21-bgardon@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Ben Gardon authored
Direct roots don't have a write flooding count because the guest can't affect that paging structure. Thus there's no need to clear the write flooding count on a fast CR3 switch for direct roots. Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell machine. This series introduced no new failures. This series can be viewed in Gerrit at: https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538Signed-off-by:
-
Ben Gardon authored
In order to support MMIO, KVM must be able to walk the TDP paging structures to find mappings for a given GFN. Support this walk for the TDP MMU. Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell machine. This series introduced no new failures. This series can be viewed in Gerrit at: https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538 v2: Thanks to Dan Carpenter and kernel test robot for finding that root was used uninitialized in get_mmio_spte. Signed-off-by:
kernel test robot <lkp@intel.com> Reported-by:
-
Ben Gardon authored
To support nested virtualization, KVM will sometimes need to write protect pages which are part of a shadowed paging structure or are not writable in the shadowed paging structure. Add a function to write protect GFN mappings for this purpose. Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell machine. This series introduced no new failures. This series can be viewed in Gerrit at: https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538Signed-off-by:
-
Ben Gardon authored
Dirty logging ultimately breaks down MMU mappings to 4k granularity. When dirty logging is no longer needed, these granaular mappings represent a useless performance penalty. When dirty logging is disabled, search the paging structure for mappings that could be re-constituted into a large page mapping. Zap those mappings so that they can be faulted in again at a higher mapping level. Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell machine. This series introduced no new failures. This series can be viewed in Gerrit at: https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538Signed-off-by:
-
Ben Gardon authored
Dirty logging is a key feature of the KVM MMU and must be supported by the TDP MMU. Add support for both the write protection and PML dirty logging modes. Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell machine. This series introduced no new failures. This series can be viewed in Gerrit at: https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538Signed-off-by:
-
Ben Gardon authored
In order to interoperate correctly with the rest of KVM and other Linux subsystems, the TDP MMU must correctly handle various MMU notifiers. Add a hook and handle the change_pte MMU notifier. Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell machine. This series introduced no new failures. This series can be viewed in Gerrit at: https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538Signed-off-by:
-
Ben Gardon authored
In order to interoperate correctly with the rest of KVM and other Linux subsystems, the TDP MMU must correctly handle various MMU notifiers. The main Linux MM uses the access tracking MMU notifiers for swap and other features. Add hooks to handle the test/flush HVA (range) family of MMU notifiers. Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell machine. This series introduced no new failures. This series can be viewed in Gerrit at: https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538Signed-off-by:
-
Ben Gardon authored
In order to interoperate correctly with the rest of KVM and other Linux subsystems, the TDP MMU must correctly handle various MMU notifiers. Add hooks to handle the invalidate range family of MMU notifiers. Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell machine. This series introduced no new failures. This series can be viewed in Gerrit at: https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538Signed-off-by:
-
Ben Gardon authored
Attach struct kvm_mmu_pages to every page in the TDP MMU to track metadata, facilitate NX reclaim, and enable inproved parallelism of MMU operations in future patches. Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell machine. This series introduced no new failures. This series can be viewed in Gerrit at: https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538Signed-off-by:
-
