- 26 Nov, 2012 3 commits
-
-
git://git.infradead.org/users/jcooper/linuxOlof Johansson authored
From Jason Cooper: orion dt for v3.8 - ehci-orion dt binding - gpio-poweroff - use dt regulators - move mpp to DT/pinctrl Depends on: - orion/boards - merge conflicts - keep all 'select's in Kconfig - remove all #includes in board-*.c - pinctrl/devel up to: - 06763c74 pinctrl: mvebu: move to its own directory * tag 'orion_dt_for_3.8' of git://git.infradead.org/users/jcooper/linux: (211 commits) ARM: Kirkwood: remove kirkwood_ehci_init() from new boards ARM: Kirkwood: Add support LED of OpenBlocks A6 ARM: Kirkwood: Convert to EHCI via DT for OpenBlocks A6 ARM: kirkwood: Add NAND partiton map for OpenBlocks A6 ARM: kirkwood: Add support second I2C bus and RTC on OpenBlocks A6 ARM: kirkwood: Add support DT of second I2C bus ARM: kirkwood: Convert mplcec4 board to pinctrl ARM: Kirkwood: Convert km_kirkwood to pinctrl ARM: Kirkwood: support 98DX412x kirkwoods with pinctrl ARM: Kirkwood: Convert IX2-200 to pinctrl. ARM: Kirkwood: Convert lsxl boards to pinctrl. ARM: Kirkwood: Convert ib62x0 to pinctrl. ARM: Kirkwood: Convert GoFlex Net to pinctrl. ARM: Kirkwood: Convert dreamplug to pinctrl. ARM: Kirkwood: Convert dockstar to pinctrl. ARM: Kirkwood: Convert dnskw to pinctrl ARM: Kirkwood: Convert iConnect to pinctrl. ARM: Kirkwood: Convert TS219 to pinctrl. ARM: Kirkwood: Add DTSI files for pinctrl ARM: Kirkwood: Make use of mvebu pincltl and gpio drivers ... Signed-off-by:Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge branch 'next/dt-samsung-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt From Kukjin Kim: Here is second Samsung DT stuff for v3.8. This is including power domain DT support for exynos and Google ARM Chromebook, Snow board and exynos4210-origen updates. * 'next/dt-samsung-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: dts: Use drive strength 3 for SD pins for exynos4 ARM: dts: Set up power domains for exynos4 ARM: EXYNOS: Bind devices to power domains using DT ARM: EXYNOS: Fix power domain name initialization ARM: EXYNOS: Detect power domain state on registration from DT ARM: dts: Add vmmc fixed voltage regulator for exynos4210-origen ARM: dts: Update sdhci nodes for current bindings for exynos4210-origen ARM: dts: Update for pinctrl-samsung driver for exynos4210-origen ARM: dts: Split memory sections for exynos4210-origen ARM: EXYNOS: add all i2c busses to auxdata for DT ARM: dts: Add aliases for i2c controller for exynos4 ARM: dts: Add board dts file for Snow board (ARM Chromebook) ARM: dts: Move the dwmmc aliases from smdk5250 dts to exynos Add/add conflicts resolved in arch/arm/boot/dts/exynos5250-smdk5250.dts and arch/arm/mach-exynos/mach-exynos5-dt.c. Signed-off-by:
-
git://git.linaro.org/people/shawnguo/linux-2.6Olof Johansson authored
From Shawn Guo: They are a few mxs dts updates coming a little bit late. I'm sending them as the second mxs/dt pull request for 3.8. Please consider to pull. * tag 'mxs-dt-3.8-2' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: dts: mxs: add oled support for the cfa-10036 ARM: mxs: Add SchulerControl SPS1 DTS file ARM: imx23-olinuxino: Add spi support
-
- 24 Nov, 2012 37 commits
-
-
Jason Cooper authored
ehci-orion initialization moved to DT. New boards don't need to call kirkwood_ehci_init(). Signed-off-by:Jason Cooper <jason@lakedaemon.net>
-
Nobuhiro Iwamatsu authored
OpenBlocks A6 has three leds via GPIO. This supports them. And this fix typo about led, because hardware manual has typo. Signed-off-by:
Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by:
-
Nobuhiro Iwamatsu authored
EHCI driver enables by default in kirkwood.dtsi. This removes kirkwood_ehci_init function. Signed-off-by:
-
Nobuhiro Iwamatsu authored
Signed-off-by:
-
Nobuhiro Iwamatsu authored
OpenBlocks A6 uses second I2C with RTC of s35390a. This supports them. Signed-off-by:
-
Nobuhiro Iwamatsu authored
Second I2C bus is supported by 88f6282 and 88f6283. This creates kirkwood-6282.dtsi, and defines DT table of second I2C bus. Signed-off-by:
-
Stefan Peter authored
Signed-off-by:
Stefan Peter <s.peter@mpl.ch> Acked-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Valentin Longchamp authored
Signed-off-by:
Valentin Longchamp <valentin.longchamp@keymile.com> Signed-off-by:
-
Valentin Longchamp authored
The Marvell 98DX412x SoC embed a kirkwood variant that does not have pinctrl support yet. Even though this kirkwood is very similar to the 88f6281, on the MPP front a lot of pins are not available. That's why a new kirkwood pinctrl variant is needed. Signed-off-by:
-
Andrew Lunn authored
Signed-off-by:
-
Andrew Lunn authored
Signed-off-by:
Michael Walle <michael@walle.cc> Signed-off-by:
-
Andrew Lunn authored
Signed-off-by:
Simon Baatz <gmbnomis@gmail.com> Signed-off-by:
-
Andrew Lunn authored
Signed-off-by:
Joshua Coombs <josh.coombs@gmail.com> Signed-off-by:
-
Andrew Lunn authored
Signed-off-by:
-
Andrew Lunn authored
Signed-off-by:
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by:
-
Andrew Lunn authored
Signed-off-by:
Jamie Lentin <jm@lentin.co.uk> Signed-off-by:
-
Andrew Lunn authored
Signed-off-by:
-
Andrew Lunn authored
Make use of the pinctrl driver for configuring all the pins, instead of using the Orion mpp code. Signed-off-by:
-
Andrew Lunn authored
There are a couple of different variants of Kirkwood, which differ in the pin muxing. These DTSI files set the correct compatibility and define commonly used groups of pins, which board dbs files can reference. Signed-off-by:
-
Andrew Lunn authored
Select the generic mvebu kirkwood pincltr driver and generic mvebu gpio driver. This requires minor changes to the DT, and the calls to configure plat-orion gpio driver are removed. Signed-off-by:
-
Andrew Lunn authored
Kirkwood & Dove can also use this driver, so expand the scope to include all platform orion devices. Signed-off-by:
-
Sebastian Hesselbarth authored
SolidRun CuBox has a led on a gpio pin. As there is now DT pinctrl support for Dove, make use of a pinhog to ensure the pin is set to gpio. Signed-off-by:
-
Sebastian Hesselbarth authored
Following the ongoing conversion of Orion SoCs to DT, make use of gpio and pinctrl drivers through DT. The main dtsi for Dove is prepared to allow board specific descriptors to make use of pinctrl muxing. Signed-off-by:
-
Axel Lin authored
When setting audio1 pinmux the bits in the corresponding registers are not cleared. This fix first clears all bits and then sets the required bits according to the selected function. Signed-off-by:
Axel Lin <axel.lin@ingics.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Sebastian Hesselbarth authored
There has been a change in readl/writel to require registers addresses marked as IOMEM(). This patch takes care of this and also replaces ORing address offsets with adding them. Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by:
-
Andrew Lunn authored
Control the power to USB and HDD using a fixed regulator. Signed-off-by:
-
Andrew Lunn authored
Control the power to USB using a fixed regulator. Signed-off-by:
-
Andrew Lunn authored
Control the power to USB using a fixed regulator. Signed-off-by:
-
Andrew Lunn authored
Control the power to SATA0 and SATA1 using a fixed regulator. Signed-off-by:
-
Andrew Lunn authored
A few boards use a GPIO line to enable power to subsystems, eg USB or SATA devices. Pull in the regulator framework as the first step to controlling these GPIO lines are regulators. Signed-off-by:
-
Andrew Lunn authored
Signed-off-by:
-
Andrew Lunn authored
Also enable the gpio-poweroff driver when DT is used. Signed-off-by:
-
Jamie Lentin authored
Given appropriate devicetree bindings, this driver registers a pm_power_off function to set a GPIO line high/low to power down your board. Signed-off-by:
-
Jamie Lentin authored
The default chip-delay of 25us is a bit too tight for some DNS-320's, and D-Link seem to specify 30us in their kernels for both devices. Increase to 35us to make sure the NAND is stable. Signed-off-by:
-
Andrew Lunn authored
Now that the EHCI driver has DT support, drop old style configuration of it and add DT in its place. Since all the boards enable the EHCI, enable it by default in kirkwood.dtsi. Any new boards which don't have USB can specifically disable it. Signed-off-by:
-
Andrew Lunn authored
Based on previous work by Michael Walle and Jason Cooper. Made their work actually work, which required added interrupt from DT and auxdata, along with setting the dma_mask, which DT does not currently do. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Jason Cooper authored
merge pinctrl/devel up to: 06763c74 pinctrl: mvebu: move to its own directory
-
