- 08 Oct, 2017 10 commits
-
-
John Crispin authored
[ Upstream commit 58181a11 ] There is a typo inside the pinmux setup code. The function is really called utif and not util. This was recently discovered when people were trying to make the UTIF interface work. Signed-off-by:
John Crispin <john@phrozen.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14899/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Paul Burton authored
[ Upstream commit 3f00f4d8 ] When clearing the .bss section in kernel_entry we do so using LONG_S instructions, and branch whilst the current write address doesn't equal the end of the .bss section minus the size of a long integer. The .bss section always begins at a long-aligned address and we always increment the write pointer by the size of a long integer - we therefore rely upon the .bss section ending at a long-aligned address. If this is not the case then the long-aligned write address can never be equal to the non-long-aligned end address & we will continue to increment past the end of the .bss section, attempting to zero the rest of memory. Despite this requirement that .bss end at a long-aligned address we pass 0 as the end alignment requirement to the BSS_SECTION macro and thus don't guarantee any particular alignment, allowing us to hit the error condition described above. Fix this by instead passing 8 bytes as the end alignment argument to the BSS_SECTION macro, ensuring that the end of the .bss section is always at least long-aligned. Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14526/Signed-off-by:
-
Simon Horman authored
[ Upstream commit 654450ba ] Use recently added R-Car Gen 2 fallback binding for msiof nodes in DT for r8a7790 SoC. This has no run-time effect for the current driver as the initialisation sequence is the same for the SoC-specific binding for r8a7790 and the fallback binding for R-Car Gen 2. Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Santosh Shilimkar authored
[ Upstream commit 941f8d55 ] When application sends an RDS RDMA composite message consist of RDMA transfer to be followed up by non RDMA payload, it expect to be notified *only* when the full message gets delivered. RDS RDMA notification doesn't behave this way though. Thanks to Venkat for debug and root casuing the issue where only first part of the message(RDMA) was successfully delivered but remainder payload delivery failed. In that case, application should not be notified with a false positive of message delivery success. Fix this case by making sure the user gets notified only after the full message delivery. Reviewed-by:
Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com> Signed-off-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
Ondrej Jirman authored
[ Upstream commit a43c9642 ] When adjusting PLL_CPUX on H3, the PLL is temporarily driven too high, and the system becomes unstable (oopses or hangs). Add a notifier to avoid this situation by temporarily switching to a known stable 24 MHz oscillator. Signed-off-by:
Ondrej Jirman <megous@megous.com> Tested-by:
Lutz Sammer <johns98@gmx.net> Acked-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
[ Upstream commit 80b7a2e2 ] Add CPU operating points for Exynos4412 Prime (it supports additional 1704MHz & 1600MHz OPPs and 1500MHz OPP is just a regular non-turbo OPP on this SoC). Also update relevant cooling maps to account for new OPPs. ODROID-X2/U2/U3 boards use Exynos4412 Prime SoC version so update their board files accordingly. Based on Hardkernel's kernel for ODROID-X2/U2/U3 boards. Cc: Doug Anderson <dianders@chromium.org> Cc: Andreas Faerber <afaerber@suse.de> Cc: Thomas Abraham <thomas.ab@samsung.com> Cc: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Cc: Ben Gamari <ben@smart-cactus.org> Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Ville Syrjälä authored
[ Upstream commit 58d09ebd ] Do the overlay frontbuffer tracking properly so that it matches the state of the overlay on/off/continue requests. One slight problem is that intel_frontbuffer_flip_complete() may get delayed by an arbitrarily liong time due to the fact that the overlay code likes to bail out when a signal occurs. So the flip may not get completed until the ioctl is restarted. But fixing that would require bigger surgery, so I decided to ignore it for now. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1481131693-27993-5-git-send-email-ville.syrjala@linux.intel.comReviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 14d37564 ] This patch fixes a place where function gfs2_glock_iter_next can reference an invalid error pointer. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Bob Peterson <rpeterso@redhat.com> Signed-off-by:
-
Bartosz Golaszewski authored
[ Upstream commit 2e644be3 ] THS8135 is a configurable video DAC. Add DT bindings for this chip. Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1481623759-12786-3-git-send-email-bgolaszewski@baylibre.comSigned-off-by:
-
Kristian H. Kristensen authored
[ Upstream commit af913418 ] We need to define DRM_FORMAT_MOD_VENDOR_NONE for the fourcc_mod_code() macro to work correctly. Signed-off-by:
Kristian H. Kristensen <hoegsberg@google.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1481657272-25975-1-git-send-email-hoegsberg@google.comSigned-off-by:
-
- 05 Oct, 2017 30 commits
-
-
Greg Kroah-Hartman authored
-
Stefano Stabellini authored
commit 7e91c7df upstream. This function creates userspace mapping for the DMA-coherent memory. Signed-off-by:
Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by:
Oleksandr Dmytryshyn <oleksandr.dmytryshyn@globallogic.com> Signed-off-by:
Andrii Anisov <andrii_anisov@epam.com> Signed-off-by:
Konrad Rzeszutek Wilk <konrad@kernel.org> Signed-off-by:
-
Vladis Dronov authored
commit 8e75f7a7 upstream. 'clk' is copied to a userland with padding byte(s) after 'vclk_post_div' field unitialized, leaking data from the stack. Fix this ensuring all of 'clk' is initialized to zero. References: https://github.com/torvalds/linux/pull/441Reported-by:
sohu0106 <sohu0106@126.com> Signed-off-by:
Vladis Dronov <vdronov@redhat.com> Signed-off-by:
-
Paolo Bonzini authored
commit c0a1666b upstream. This fixes a compilation failure on 32-bit systems. Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Frederic Barrat authored
commit 197267d0 upstream. cxl keeps a driver use count, which is used with the hash memory model on p8 to know when to upgrade local TLBIs to global and to trigger callbacks to manage the MMU for PSL8. If a process opens a context and closes without attaching or fails the attachment, the driver use count is never decremented. As a consequence, TLB invalidations remain global, even if there are no active cxl contexts. We should increment the driver use count when the process is attaching to the cxl adapter, and not on open. It's not needed before the adapter starts using the context and the use count is decremented on the detach path, so it makes more sense. It affects only the user api. The kernel api is already doing The Right Thing. Signed-off-by:
Frederic Barrat <fbarrat@linux.vnet.ibm.com> Cc: stable@vger.kernel.org # v4.2+ Fixes: 7bb5d91a ("cxl: Rework context lifetimes") Acked-by:
Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> [ajd: backport to stable v4.9 tree] Signed-off-by:
-
Haozhong Zhang authored
commit 5753743f upstream. WARN_ON_ONCE(pi_test_sn(&vmx->pi_desc)) in kvm_vcpu_trigger_posted_interrupt() intends to detect the violation of invariant that VT-d PI notification event is not suppressed when vcpu is in the guest mode. Because the two checks for the target vcpu mode and the target suppress field cannot be performed atomically, the target vcpu mode may change in between. If that does happen, WARN_ON_ONCE() here may raise false alarms. As the previous patch fixed the real invariant breaker, remove this WARN_ON_ONCE() to avoid false alarms, and document the allowed cases instead. Signed-off-by:
Haozhong Zhang <haozhong.zhang@intel.com> Reported-by:
"Ramamurthy, Venkatesh" <venkatesh.ramamurthy@intel.com> Reported-by:
Dan Williams <dan.j.williams@intel.com> Reviewed-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Haozhong Zhang authored
commit dc91f2eb upstream. In kvm_vcpu_trigger_posted_interrupt() and pi_pre_block(), KVM assumes that PI notification events should not be suppressed when the target vCPU is not blocked. vmx_update_pi_irte() sets the SN field before changing an interrupt from posting to remapping, but it does not check the vCPU mode. Therefore, the change of SN field may break above the assumption. Besides, I don't see reasons to suppress notification events here, so remove the changes of SN field to avoid race condition. Signed-off-by:
-
Myungho Jung authored
commit b94bf594 upstream. timer_migration sysctl acts as a boolean switch, so the allowed values should be restricted to 0 and 1. Add the necessary extra fields to the sysctl table entry to enforce that. [ tglx: Rewrote changelog ] Signed-off-by:
Myungho Jung <mhjungk@gmail.com> Link: http://lkml.kernel.org/r/1492640690-3550-1-git-send-email-mhjungk@gmail.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Kazuhiro Hayashi <kazuhiro3.hayashi@toshiba.co.jp> Signed-off-by:
-
Andreas Gruenbacher authored
commit 10201655 upstream. The switch to rhashtables (commit 88ffbf3e) broke the debugfs glock dump (/sys/kernel/debug/gfs2/<device>/glocks) for dumps bigger than a single buffer: the right function for restarting an rhashtable iteration from the beginning of the hash table is rhashtable_walk_enter; rhashtable_walk_stop + rhashtable_walk_start will just resume from the current position. The upstream commit doesn't directly apply to 4.9.y because 4.9.y doesn't have the following mainline commits: 92ecd73a gfs2: Deduplicate gfs2_{glocks,glstats}_open cc37a627 gfs2: Replace rhashtable_walk_init with rhashtable_walk_enter Signed-off-by:
Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by:
-
Eric Biggers authored
commit 814fb7bb upstream. On x86, userspace can use the ptrace() or rt_sigreturn() system calls to set a task's extended state (xstate) or "FPU" registers. ptrace() can set them for another task using the PTRACE_SETREGSET request with NT_X86_XSTATE, while rt_sigreturn() can set them for the current task. In either case, registers can be set to any value, but the kernel assumes that the XSAVE area itself remains valid in the sense that the CPU can restore it. However, in the case where the kernel is using the uncompacted xstate format (which it does whenever the XSAVES instruction is unavailable), it was possible for userspace to set the xcomp_bv field in the xstate_header to an arbitrary value. However, all bits in that field are reserved in the uncompacted case, so when switching to a task with nonzero xcomp_bv, the XRSTOR instruction failed with a #GP fault. This caused the WARN_ON_FPU(err) in copy_kernel_to_xregs() to be hit. In addition, since the error is otherwise ignored, the FPU registers from the task previously executing on the CPU were leaked. Fix the bug by checking that the user-supplied value of xcomp_bv is 0 in the uncompacted case, and returning an error otherwise. The reason for validating xcomp_bv rather than simply overwriting it with 0 is that we want userspace to see an error if it (incorrectly) provides an XSAVE area in compacted format rather than in uncompacted format. Note that as before, in case of error we clear the task's FPU state. This is perhaps non-ideal, especially for PTRACE_SETREGSET; it might be better to return an error before changing anything. But it seems the "clear on error" behavior is fine for now, and it's a little tricky to do otherwise because it would mean we couldn't simply copy the full userspace state into kernel memory in one __copy_from_user(). This bug was found by syzkaller, which hit the above-mentioned WARN_ON_FPU(): WARNING: CPU: 1 PID: 0 at ./arch/x86/include/asm/fpu/internal.h:373 __switch_to+0x5b5/0x5d0 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.13.0 #453 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff9ba2bc8e42c0 task.stack: ffffa78cc036c000 RIP: 0010:__switch_to+0x5b5/0x5d0 RSP: 0000:ffffa78cc08bbb88 EFLAGS: 00010082 RAX: 00000000fffffffe RBX: ffff9ba2b8bf2180 RCX: 00000000c0000100 RDX: 00000000ffffffff RSI: 000000005cb10700 RDI: ffff9ba2b8bf36c0 RBP: ffffa78cc08bbbd0 R08: 00000000929fdf46 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000000 R12: ffff9ba2bc8e42c0 R13: 0000000000000000 R14: ffff9ba2b8bf3680 R15: ffff9ba2bf5d7b40 FS: 00007f7e5cb10700(0000) GS:ffff9ba2bf400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004005cc CR3: 0000000079fd5000 CR4: 00000000001406e0 Call Trace: Code: 84 00 00 00 00 00 e9 11 fd ff ff 0f ff 66 0f 1f 84 00 00 00 00 00 e9 e7 fa ff ff 0f ff 66 0f 1f 84 00 00 00 00 00 e9 c2 fa ff ff <0f> ff 66 0f 1f 84 00 00 00 00 00 e9 d4 fc ff ff 66 66 2e 0f 1f Here is a C reproducer. The expected behavior is that the program spin forever with no output. However, on a buggy kernel running on a processor with the "xsave" feature but without the "xsaves" feature (e.g. Sandy Bridge through Broadwell for Intel), within a second or two the program reports that the xmm registers were corrupted, i.e. were not restored correctly. With CONFIG_X86_DEBUG_FPU=y it also hits the above kernel warning. #define _GNU_SOURCE #include <stdbool.h> #include <inttypes.h> #include <linux/elf.h> #include <stdio.h> #include <sys/ptrace.h> #include <sys/uio.h> #include <sys/wait.h> #include <unistd.h> int main(void) { int pid = fork(); uint64_t xstate[512]; struct iovec iov = { .iov_base = xstate, .iov_len = sizeof(xstate) }; if (pid == 0) { bool tracee = true; for (int i = 0; i < sysconf(_SC_NPROCESSORS_ONLN) && tracee; i++) tracee = (fork() != 0); uint32_t xmm0[4] = { [0 ... 3] = tracee ? 0x00000000 : 0xDEADBEEF }; asm volatile(" movdqu %0, %%xmm0\n" " mov %0, %%rbx\n" "1: movdqu %%xmm0, %0\n" " mov %0, %%rax\n" " cmp %%rax, %%rbx\n" " je 1b\n" : "+m" (xmm0) : : "rax", "rbx", "xmm0"); printf("BUG: xmm registers corrupted! tracee=%d, xmm0=%08X%08X%08X%08X\n", tracee, xmm0[0], xmm0[1], xmm0[2], xmm0[3]); } else { usleep(100000); ptrace(PTRACE_ATTACH, pid, 0, 0); wait(NULL); ptrace(PTRACE_GETREGSET, pid, NT_X86_XSTATE, &iov); xstate[65] = -1; ptrace(PTRACE_SETREGSET, pid, NT_X86_XSTATE, &iov); ptrace(PTRACE_CONT, pid, 0, 0); wait(NULL); } return 1; } Note: the program only tests for the bug using the ptrace() system call. The bug can also be reproduced using the rt_sigreturn() system call, but only when called from a 32-bit program, since for 64-bit programs the kernel restores the FPU state from the signal frame by doing XRSTOR directly from userspace memory (with proper error checking). Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Eric Biggers <ebiggers@google.com> Reviewed-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
Rik van Riel <riel@redhat.com> Acked-by:
Dave Hansen <dave.hansen@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Eric Biggers <ebiggers3@gmail.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Kevin Hao <haokexin@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael Halcrow <mhalcrow@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Cc: Yu-cheng Yu <yu-cheng.yu@intel.com> Cc: kernel-hardening@lists.openwall.com Fixes: 0b29643a ("x86/xsaves: Change compacted format xsave area header") Link: http://lkml.kernel.org/r/20170922174156.16780-2-ebiggers3@gmail.com Link: http://lkml.kernel.org/r/20170923130016.21448-25-mingo@kernel.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Laurent Dufour authored
commit a3c4fb7c upstream. commit 7b2d0dba ("x86/mm/pkeys: Pass VMA down in to fault signal generation code") passes down a vma pointer to the error path, but that is done once the mmap_sem is released when calling mm_fault_error() from __do_page_fault(). This is dangerous as the vma structure is no more safe to be used once the mmap_sem has been released. As only the protection key value is required in the error processing, we could just pass down this value. Fix it by passing a pointer to a protection key value down to the fault signal generation code. The use of a pointer allows to keep the check generating a warning message in fill_sig_info_pkey() when the vma was not known. If the pointer is valid, the protection value can be accessed by deferencing the pointer. [ tglx: Made *pkey u32 as that's the type which is passed in siginfo ] Fixes: 7b2d0dba ("x86/mm/pkeys: Pass VMA down in to fault signal generation code") Signed-off-by:
Laurent Dufour <ldufour@linux.vnet.ibm.com> Signed-off-by:
-
satoru takeuchi authored
commit 6d6d2829 upstream. `btrfs sub set-default` succeeds to set an ID which isn't corresponding to any fs/file tree. If such the bad ID is set to a filesystem, we can't mount this filesystem without specifying `subvol` or `subvolid` mount options. Fixes: 6ef5ed0d ("Btrfs: add ioctl and incompat flag to set the default mount subvol") Signed-off-by:
Satoru Takeuchi <satoru.takeuchi@gmail.com> Reviewed-by:
Qu Wenruo <quwenruo.btrfs@gmx.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Naohiro Aota authored
commit 78ad4ce0 upstream. btrfs_cmp_data_prepare() (almost) always returns 0 i.e. ignoring errors from gather_extent_pages(). While the pages are freed by btrfs_cmp_data_free(), cmp->num_pages still has > 0. Then, btrfs_extent_same() try to access the already freed pages causing faults (or violates PageLocked assertion). This patch just return the error as is so that the caller stop the process. Signed-off-by:
Naohiro Aota <naohiro.aota@wdc.com> Fixes: f4414602 ("btrfs: fix deadlock with extent-same and readpage") Reviewed-by:
-
Naohiro Aota authored
commit bb166d72 upstream. __del_reloc_root should be called before freeing up reloc_root->node. If not, calling __del_reloc_root() dereference reloc_root->node, causing the system BUG. Fixes: 6bdf131f ("Btrfs: don't leak reloc root nodes on error") Signed-off-by:
Nikolay Borisov <nborisov@suse.com> Reviewed-by:
-
Nicolai Stange authored
commit 9561475d upstream. The driver_override implementation is susceptible to a race condition when different threads are reading vs. storing a different driver override. Add locking to avoid the race condition. This is in close analogy to commit 62655397 ("driver core: platform: fix race condition with driver_override") from Adrian Salido. Fixes: 782a985d ("PCI: Introduce new device binding path using pci_dev.driver_override") Signed-off-by:
Nicolai Stange <nstange@suse.de> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Lucas Stach authored
commit 51841752 upstream. All manipulations of the gem_object list need to be protected by the list mutex, as GEM objects can be created and freed in parallel. This fixes a kernel memory corruption. Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Signed-off-by:
-
Ross Zwisler authored
commit 6851a3db upstream. Currently only the blocksize is checked, but we should really be calling bdev_dax_supported() which also tests to make sure we can get a struct dax_device and that the dax_direct_access() path is working. This is the same check that we do for the "-o dax" mount option in xfs_fs_fill_super(). This does not fix the race issues that caused the XFS DAX inode option to be disabled, so that option will still be disabled. If/when we re-enable it, though, I think we will want this issue to have been fixed. I also do think that we want to fix this in stable kernels. Signed-off-by:
Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
-
Jim Mattson authored
commit 51aa68e7 upstream. If L1 does not specify the "use TPR shadow" VM-execution control in vmcs12, then L0 must specify the "CR8-load exiting" and "CR8-store exiting" VM-execution controls in vmcs02. Failure to do so will give the L2 VM unrestricted read/write access to the hardware CR8. This fixes CVE-2017-12154. Signed-off-by:
Jim Mattson <jmattson@google.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
-
Jan H. Schönherr authored
commit 3a8b0677 upstream. The value of the guest_irq argument to vmx_update_pi_irte() is ultimately coming from a KVM_IRQFD API call. Do not BUG() in vmx_update_pi_irte() if the value is out-of bounds. (Especially, since KVM as a whole seems to hang after that.) Instead, print a message only once if we find that we don't have a route for a certain IRQ (which can be out-of-bounds or within the array). This fixes CVE-2017-1000252. Fixes: efc64404 ("KVM: x86: Update IRTE for posted-interrupts") Signed-off-by:
Jan H. Schönherr <jschoenh@amazon.de> Signed-off-by:
-
Boqun Feng authored
commit b862789a upstream. Sasha Levin reported a WARNING: | WARNING: CPU: 0 PID: 6974 at kernel/rcu/tree_plugin.h:329 | rcu_preempt_note_context_switch kernel/rcu/tree_plugin.h:329 [inline] | WARNING: CPU: 0 PID: 6974 at kernel/rcu/tree_plugin.h:329 | rcu_note_context_switch+0x16c/0x2210 kernel/rcu/tree.c:458 ... | CPU: 0 PID: 6974 Comm: syz-fuzzer Not tainted 4.13.0-next-20170908+ #246 | Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS | 1.10.1-1ubuntu1 04/01/2014 | Call Trace: ... | RIP: 0010:rcu_preempt_note_context_switch kernel/rcu/tree_plugin.h:329 [inline] | RIP: 0010:rcu_note_context_switch+0x16c/0x2210 kernel/rcu/tree.c:458 | RSP: 0018:ffff88003b2debc8 EFLAGS: 00010002 | RAX: 0000000000000001 RBX: 1ffff1000765bd85 RCX: 0000000000000000 | RDX: 1ffff100075d7882 RSI: ffffffffb5c7da20 RDI: ffff88003aebc410 | RBP: ffff88003b2def30 R08: dffffc0000000000 R09: 0000000000000001 | R10: 0000000000000000 R11: 0000000000000000 R12: ffff88003b2def08 | R13: 0000000000000000 R14: ffff88003aebc040 R15: ffff88003aebc040 | __schedule+0x201/0x2240 kernel/sched/core.c:3292 | schedule+0x113/0x460 kernel/sched/core.c:3421 | kvm_async_pf_task_wait+0x43f/0x940 arch/x86/kernel/kvm.c:158 | do_async_page_fault+0x72/0x90 arch/x86/kernel/kvm.c:271 | async_page_fault+0x22/0x30 arch/x86/entry/entry_64.S:1069 | RIP: 0010:format_decode+0x240/0x830 lib/vsprintf.c:1996 | RSP: 0018:ffff88003b2df520 EFLAGS: 00010283 | RAX: 000000000000003f RBX: ffffffffb5d1e141 RCX: ffff88003b2df670 | RDX: 0000000000000001 RSI: dffffc0000000000 RDI: ffffffffb5d1e140 | RBP: ffff88003b2df560 R08: dffffc0000000000 R09: 0000000000000000 | R10: ffff88003b2df718 R11: 0000000000000000 R12: ffff88003b2df5d8 | R13: 0000000000000064 R14: ffffffffb5d1e140 R15: 0000000000000000 | vsnprintf+0x173/0x1700 lib/vsprintf.c:2136 | sprintf+0xbe/0xf0 lib/vsprintf.c:2386 | proc_self_get_link+0xfb/0x1c0 fs/proc/self.c:23 | get_link fs/namei.c:1047 [inline] | link_path_walk+0x1041/0x1490 fs/namei.c:2127 ... This happened when the host hit a page fault, and delivered it as in an async page fault, while the guest was in an RCU read-side critical section. The guest then tries to reschedule in kvm_async_pf_task_wait(), but rcu_preempt_note_context_switch() would treat the reschedule as a sleep in RCU read-side critical section, which is not allowed (even in preemptible RCU). Thus the WARN. To cure this, make kvm_async_pf_task_wait() go to the halt path if the PF happens in a RCU read-side critical section. Reported-by:
Sasha Levin <levinsasha928@gmail.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by:
Boqun Feng <boqun.feng@gmail.com> Signed-off-by:
-
Paolo Bonzini authored
commit 31afb2ea upstream. The simplify part: do not touch pi_desc.nv, we can set it when the VCPU is first created. Likewise, pi_desc.sn is only handled by vmx_vcpu_pi_load, do not touch it in __pi_post_block. The fix part: do not check kvm_arch_has_assigned_device, instead check the SN bit to figure out whether vmx_vcpu_pi_put ran before. This matches what the previous patch did in pi_post_block. Cc: Huangweidong <weidong.huang@huawei.com> Cc: Gonglei <arei.gonglei@huawei.com> Cc: wangxin <wangxinxin.wang@huawei.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Tested-by:
Longpeng (Mike) <longpeng2@huawei.com> Signed-off-by:
-
Paolo Bonzini authored
commit 8b306e2f upstream. In some cases, for example involving hot-unplug of assigned devices, pi_post_block can forget to remove the vCPU from the blocked_vcpu_list. When this happens, the next call to pi_pre_block corrupts the list. Fix this in two ways. First, check vcpu->pre_pcpu in pi_pre_block and WARN instead of adding the element twice in the list. Second, always do the list removal in pi_post_block if vcpu->pre_pcpu is set (not -1). The new code keeps interrupts disabled for the whole duration of pi_pre_block/pi_post_block. This is not strictly necessary, but easier to follow. For the same reason, PI.ON is checked only after the cmpxchg, and to handle it we just call the post-block code. This removes duplication of the list removal code. Cc: Huangweidong <weidong.huang@huawei.com> Cc: Gonglei <arei.gonglei@huawei.com> Cc: wangxin <wangxinxin.wang@huawei.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Tested-by:
-
Paolo Bonzini authored
commit cd39e117 upstream. Simple code movement patch, preparing for the next one. Cc: Huangweidong <weidong.huang@huawei.com> Cc: Gonglei <arei.gonglei@huawei.com> Cc: wangxin <wangxinxin.wang@huawei.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Tested-by:
-
Will Deacon authored
commit 760bfb47 upstream. We currently route pte translation faults via do_page_fault, which elides the address check against TASK_SIZE before invoking the mm fault handling code. However, this can cause issues with the path walking code in conjunction with our word-at-a-time implementation because load_unaligned_zeropad can end up faulting in kernel space if it reads across a page boundary and runs into a page fault (e.g. by attempting to read from a guard region). In the case of such a fault, load_unaligned_zeropad has registered a fixup to shift the valid data and pad with zeroes, however the abort is reported as a level 3 translation fault and we dispatch it straight to do_page_fault, despite it being a kernel address. This results in calling a sleeping function from atomic context: BUG: sleeping function called from invalid context at arch/arm64/mm/fault.c:313 in_atomic(): 0, irqs_disabled(): 0, pid: 10290 Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [...] [<ffffff8e016cd0cc>] ___might_sleep+0x134/0x144 [<ffffff8e016cd158>] __might_sleep+0x7c/0x8c [<ffffff8e016977f0>] do_page_fault+0x140/0x330 [<ffffff8e01681328>] do_mem_abort+0x54/0xb0 Exception stack(0xfffffffb20247a70 to 0xfffffffb20247ba0) [...] [<ffffff8e016844fc>] el1_da+0x18/0x78 [<ffffff8e017f399c>] path_parentat+0x44/0x88 [<ffffff8e017f4c9c>] filename_parentat+0x5c/0xd8 [<ffffff8e017f5044>] filename_create+0x4c/0x128 [<ffffff8e017f59e4>] SyS_mkdirat+0x50/0xc8 [<ffffff8e01684e30>] el0_svc_naked+0x24/0x28 Code: 36380080 d5384100 f9400800 9402566d (d4210000) ---[ end trace 2d01889f2bca9b9f ]--- Fix this by dispatching all translation faults to do_translation_faults, which avoids invoking the page fault logic for faults on kernel addresses. Reported-by:
Ankit Jain <ankijain@codeaurora.org> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Marc Zyngier authored
commit 5371513f upstream. When the kernel is entered at EL2 on an ARMv8.0 system, we construct the EL1 pstate and make sure this uses the the EL1 stack pointer (we perform an exception return to EL1h). But if the kernel is either entered at EL1 or stays at EL2 (because we're on a VHE-capable system), we fail to set SPsel, and use whatever stack selection the higher exception level has choosen for us. Let's not take any chance, and make sure that SPsel is set to one before we decide the mode we're going to run in. Acked-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Oleg Nesterov authored
commit 66a733ea upstream. As Chris explains, get_seccomp_filter() and put_seccomp_filter() can end up using different filters. Once we drop ->siglock it is possible for task->seccomp.filter to have been replaced by SECCOMP_FILTER_FLAG_TSYNC. Fixes: f8e529ed ("seccomp, ptrace: add support for dumping seccomp filters") Reported-by:
Chris Salls <chrissalls5@gmail.com> Signed-off-by:
Oleg Nesterov <oleg@redhat.com> [tycho: add __get_seccomp_filter vs. open coding refcount_inc()] Signed-off-by:
Tycho Andersen <tycho@docker.com> [kees: tweak commit log] Signed-off-by:
-
Kees Cook authored
commit 10859f38 upstream. The 2.26 release of glibc changed how siginfo_t is defined, and the earlier work-around to using the kernel definition are no longer needed. The old way needs to stay around for a while, though. Reported-by:
Seth Forshee <seth.forshee@canonical.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Will Drewry <wad@chromium.org> Cc: Shuah Khan <shuah@kernel.org> Cc: linux-kselftest@vger.kernel.org Signed-off-by:
Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by:
-
Steve Wise authored
commit 3d318605 upstream. The listening endpoint should always be dereferenced at the end of pass_accept_req(). Fixes: f86fac79 ("RDMA/iw_cxgb4: atomic find and reference for listening endpoints") Signed-off-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Steve Wise authored
commit 8b1bbf36 upstream. If a listen create fails, then the server tid (stid) is incorrectly left in the stid idr table, which can cause a touch-after-free if the stid is looked up and the already freed endpoint is touched. So make sure and remove it in the error path. Signed-off-by:
-
Christoph Hellwig authored
commit f507b54d upstream. The job structure is allocated as part of the request, so we should not free it in the error path of bsg_prepare_job. Signed-off-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
