Pull char/misc fixes from Greg KH:
 "Here are some small char/misc driver fixes for 5.7-rc7 that resolve
  some reported issues. Included in here are tiny fixes for the mei,
  coresight, rtsx, ipack, and mhi drivers.

  All of these have been in linux-next with no reported issues"

* tag 'char-misc-5.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  misc: rtsx: Add short delay after exit from ASPM
  bus: mhi: core: Fix some error return code
  ipack: tpci200: fix error return code in tpci200_register()
  coresight: cti: remove incorrect NULL return check
  mei: release me_cl object reference

Pull staging/iio fixes from Greg KH:
 "Here are some small staging and IIO driver fixes for 5.7-rc7

  Nothing major, just a collection of IIO driver fixes for reported
  issues, and a few small staging driver fixes that people have found.
  Full details are in the shortlog.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-5.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: wfx: unlock on error path
  staging: greybus: Fix uninitialized scalar variable
  staging: kpc2000: fix error return code in kp2000_pcie_probe()
  iio: sca3000: Remove an erroneous 'get_device()'
  iio: adc: stm32-dfsdm: fix device used to request dma
  iio: adc: stm32-adc: fix device used to request dma
  iio: adc: ti-ads8344: Fix channel selection
  staging: iio: ad2s1210: Fix SPI reading
  iio: dac: vf610: Fix an error handling path in 'vf610_dac_probe()'
  iio: imu: st_lsm6dsx: unlock on error in st_lsm6dsx_shub_write_raw()
  iio: chemical: atlas-sensor: correct DO-SM channels

Pull tty/serial fix from Greg KH:
 "Here is a single serial driver fix for 5.7-rc7. It resolves an issue
  with the SiFive serial console init sequence that was reported a
  number of times.

  It has been in linux-next for a while now with no reported issues"

* tag 'tty-5.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: serial: add missing spin_lock_init for SiFive serial console

Pull s390 fixes from Vasily Gorbik:

 - Add missing R_390_JMP_SLOT relocation type in KASLR code.

 - Fix set_huge_pte_at for empty ptes issue which has been uncovered
   with arch page table helper tests.

 - Correct initrd location for kdump kernel.

 - Fix s390_mmio_read/write with MIO in PCI code.

* tag 's390-5.7-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/kaslr: add support for R_390_JMP_SLOT relocation type
  s390/mm: fix set_huge_pte_at() for empty ptes
  s390/kexec_file: fix initrd location for kdump kernel
  s390/pci: Fix s390_mmio_read/write with MIO

Pull SCSI fixes from James Bottomley:
 "Three minor fixes, two in drivers, one to fix a hang after reset with
  iSCSI, and one to avoid a spurious log message; and the final core one
  to correct a suspend/resume miscount with quiesced devices"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: target: Put lun_ref at end of tmr processing
  scsi: pm: Balance pm_only counter of request queue during system resume
  scsi: qla2xxx: Do not log message when reading port speed via sysfs

Pull drm fixes from Dave Airlie:
 "Things seemed to have quieten down, though no i915 pull (I even gave
  them an extra 12 hours in case they were late).

  The amdgpu floating point fix is probably the largest, but it just
  moves some code around to it doesn't do fpu stuff outside the fpu
  boundaries. Otherwise it's just a couple of vmwgfx fixes (maintainer
  change) and two etnaviv fixes.

  vmwgfx:
   - change maintainers
   - fix redundant assignment
   - fix parameter name
   - fix return value

  etnaviv:
   - memory leak fix when userspace passes a invalid softpin address
   - off-by-one crashing the kernel in the perfmon domain iteration when
     the GPU core has both 2D and 3D capabilities

  amdgpu:
   - DP fix
   - Floating point fix
   - Fix cursor stutter issue"

* tag 'drm-fixes-2020-05-23' of git://anongit.freedesktop.org/drm/drm:
  drm/amd/display: Defer cursor lock until after VUPDATE
  drm/amd/display: Remove dml_common_def file
  drm/amd/display: DP training to set properly SCRAMBLING_DISABLE
  drm/edid: Add Oculus Rift S to non-desktop list
  drm/etnaviv: Fix a leak in submit_pin_objects()
  drm/etnaviv: fix perfmon domain interation
  drm/vmwgfx: Return true in function vmw_fence_obj_signaled()
  drm/vmwgfx: remove redundant assignment to variable ret
  drm/vmwgfx: Fix parameter name in vmw_bo_init
  drm/vmwgfx: update MAINTAINERS entry

Pull io_uring fixes from Jens Axboe:
 "A small collection of small fixes that should go into this release:

   - Two fixes for async request preparation (Pavel)

   - Busy clear fix for SQPOLL (Xiaoguang)

   - Don't use kiocb->private for O_DIRECT buf index, some file systems
     use it (Bijan)

   - Kill dead check in io_splice()

   - Ensure sqo_wait is initialized early

   - Cancel task_work if we fail adding to original process

   - Only add (IO)pollable requests to iopoll list, fixing a regression
     in this merge window"

* tag 'io_uring-5.7-2020-05-22' of git://git.kernel.dk/linux-block:
  io_uring: reset -EBUSY error when io sq thread is waken up
  io_uring: don't add non-IO requests to iopoll pending list
  io_uring: don't use kiocb.private to store buf_index
  io_uring: cancel work if task_work_add() fails
  io_uring: remove dead check in io_splice()
  io_uring: fix FORCE_ASYNC req preparation
  io_uring: don't prepare DRAIN reqs twice
  io_uring: initialize ctx->sqo_wait earlier

Pull block fixes from Jens Axboe:
 "Two fixes for null_blk zone mode"

* tag 'block-5.7-2020-05-22' of git://git.kernel.dk/linux-block:
  null_blk: don't allow discard for zoned mode
  null_blk: return error for invalid zone size

Pull RISC-V fixes from Palmer Dabbelt:
 "Two fixes:

   - Another !MMU build fix that was a straggler from last week

   - A fix to use the "register" keyword for the GP global register
     variable"

* tag 'riscv-for-linus-5.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  RISC-V: gp_in_global needs register keyword
  riscv: Fix print_vm_layout build error if NOMMU

Pull arm64 fixes from Catalin Marinas:

 - Bring the PTRACE_SYSEMU semantics in line with the man page.

 - Annotate variable assignment in get_user() with the type to avoid
   sparse warnings.

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: Add get_user() type annotation on the !access_ok() path
  arm64: Fix PTRACE_SYSEMU semantics

Pull sound fixes from Takashi Iwai:
 "Just a few small fixes: the only significant one is a slight
  improvement for PCM running position update with no-period-elapsed
  case while the rest are HD-audio fixups and ice1712 model quirk"

* tag 'sound-5.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/realtek - Add more fixup entries for Clevo machines
  ALSA: iec1712: Initialize STDSP24 properly when using the model=staudio option
  ALSA: hda/realtek - Fix silent output on Gigabyte X570 Aorus Xtreme
  ALSA: pcm: fix incorrect hw_base increase

Sparse reports "Using plain integer as NULL pointer" when the arm64
__get_user_error() assigns 0 to a pointer type. Use proper type
annotation.
Signed-of-by: Al Viro <viro@zeniv.linux.org.uk>
Reported-by: kbuild test robot <lkp@intel.com>
Link: http://lkml.kernel.org/r/20200522142321.GP23230@ZenIV.linux.org.ukSigned-off-by: Catalin Marinas <catalin.marinas@arm.com>

Pull powerpc fixes from Michael Ellerman:

 - a revert of a recent change to the PTE bits for 32-bit BookS, which
   broke swap.

 - a "fix" to disable STRICT_KERNEL_RWX for 64-bit in Kconfig, as it's
   causing crashes for some people.

Thanks to Christophe Leroy and Rui Salvaterra.

* tag 'powerpc-5.7-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s: Disable STRICT_KERNEL_RWX
  Revert "powerpc/32s: reorder Linux PTE bits to better match Hash PTE bits."

DMA transfers to and from the SD card stall for 10 seconds and run into
timeout on RTS5260 card readers after ASPM was enabled.

Adding a short msleep after disabling ASPM fixes the issue on several
Dell Precision 7530/7540 systems I tested.

This function is only called when waking up after the chip went into
power-save after not transferring data for a few seconds. The added
msleep does therefore not change anything in data transfer speed or
induce any excessive waiting while data transfers are running, or the
chip is sleeping. Only the transition from sleep to active is affected.
Signed-off-by: Klaus Doth <kdlnx@doth.eu>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/4434eaa7-2ee3-a560-faee-6cee63ebd6d4@doth.euSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'amd-drm-fixes-5.7-2020-05-21' of git://people.freedesktop.org/~agd5f/linux into drm-fixes

amd-drm-fixes-5.7-2020-05-21:

amdgpu:
- DP fix
- Floating point fix
- Fix cursor stutter issue
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200521222415.4122-1-alexander.deucher@amd.com

two fixes:
- memory leak fix when userspace passes a invalid softpin address
- off-by-one crashing the kernel in the perfmon domain iteration when
the GPU core has both 2D and 3D capabilities
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas Stach <l.stach@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/ca7bce5c8aff0fcbbdc3bf2b9723df5f687c8924.camel@pengutronix.de

Merge tag 'apparmor-pr-2020-05-21' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor

Pull apparmor bug fixes from John Johansen:

 - Fix use-after-free in aa_audit_rule_init

 - Fix refcnt leak in policy_update

 - Fix potential label refcnt leak in aa_change_profile

* tag 'apparmor-pr-2020-05-21' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor:
  apparmor: Fix use-after-free in aa_audit_rule_init
  apparmor: Fix aa_label refcnt leak in policy_update
  apparmor: fix potential label refcnt leak in aa_change_profile

As Ubuntu and Fedora release new version used kernel version equal to or
higher than v5.4, They started to support kernel exfat filesystem.

Linus reported a mount error with new version of exfat on Fedora:

        exfat: Unknown parameter 'namecase'

This is because there is a difference in mount option between old
staging/exfat and new exfat.  And utf8, debug, and codepage options as
well as namecase have been removed from new exfat.

This patch add the dummy mount options as deprecated option to be
backward compatible with old one.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In the implementation of aa_audit_rule_init(), when aa_label_parse()
fails the allocated memory for rule is released using
aa_audit_rule_free(). But after this release, the return statement
tries to access the label field of the rule which results in
use-after-free. Before releasing the rule, copy errNo and return it
after release.

Fixes: 52e8c380 ("apparmor: Fix memory leak of rule on error exit path")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>

policy_update() invokes begin_current_label_crit_section(), which
returns a reference of the updated aa_label object to "label" with
increased refcount.

When policy_update() returns, "label" becomes invalid, so the refcount
should be decreased to keep refcount balanced.

The reference counting issue happens in one exception handling path of
policy_update(). When aa_may_manage_policy() returns not NULL, the
refcnt increased by begin_current_label_crit_section() is not decreased,
causing a refcnt leak.

Fix this issue by jumping to "end_section" label when
aa_may_manage_policy() returns not NULL.

Fixes: 5ac8c355 ("apparmor: allow introspecting the loaded policy pre internal transform")
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>

aa_change_profile() invokes aa_get_current_label(), which returns
a reference of the current task's label.

According to the comment of aa_get_current_label(), the returned
reference must be put with aa_put_label().
However, when the original object pointed by "label" becomes
unreachable because aa_change_profile() returns or a new object
is assigned to "label", reference count increased by
aa_get_current_label() is not decreased, causing a refcnt leak.

Fix this by calling aa_put_label() before aa_change_profile() return
and dropping unnecessary aa_get_current_label().

Fixes: 9fcf78cc ("apparmor: update domain transitions that are subsets of confinement at nnp")
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>

The Intel kernel build robot recently pointed out that I missed the
register keyword on this one when I refactored the code to remove local
register variables (which aren't supported by LLVM).  GCC's manual
indicates that global register variables must have the register keyword,
As far as I can tell lacking the register keyword causes GCC to ignore
the __asm__ and treat this as a regular variable, but I'm not sure how
that didn't show up as some sort of failure.

Fixes: 52e7c52d ("RISC-V: Stop relying on GCC's register allocator's hueristics")
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

Pull virtio fixes from Michael Tsirkin:
 "Fix a couple of build warnings"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  vhost: missing __user tags
  vdpasim: remove unused variable 'ret'

Pull dmaengine fixes from Vinod Koul:
 "Some driver fixes:

   - dmatest restoration of defaults

   - tegra210-adma probe handling fix

   - k3-udma flags fixed for slave_sg and memcpy

   - list fix for zynqmp_dma

   - idxd interrupt completion fix

   - lock fix for owl"

* tag 'dmaengine-fix-5.7-rc7' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: tegra210-adma: Fix an error handling path in 'tegra_adma_probe()'
  dmaengine: ti: k3-udma: Fix TR mode flags for slave_sg and memcpy
  dmaengine: zynqmp_dma: Move list_del inside zynqmp_dma_free_descriptor.
  dmaengine: dmatest: Restore default for channel
  dmaengine: idxd: fix interrupt completion after unmasking
  dmaengine: owl: Use correct lock in owl_dma_get_pchan()

Pull ext4 fixes from Ted Ts'o:
 "Fix regression in ext4's FIEMAP handling introduced in v5.7-rc1"

* tag 'fiemap-regression-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix fiemap size checks for bitmap files
  ext4: fix EXT4_MAX_LOGICAL_BLOCK macro

Zoned block device specification do not define the behavior of
discard/trim command as this command is generally replaced by the reset
write pointer (zone reset) command. Emulate this in null_blk by making
zoned and discard options mutually exclusive.
Suggested-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

In null_init_zone_dev() check if the zone size is larger than device
capacity, return error if needed.

This also fixes the following oops :-

null_blk: changed the number of conventional zones to 4294967295
BUG: kernel NULL pointer dereference, address: 0000000000000010
PGD 7d76c5067 P4D 7d76c5067 PUD 7d240c067 PMD 0
Oops: 0002 [#1] SMP NOPTI
CPU: 4 PID: 5508 Comm: nullbtests.sh Tainted: G OE 5.7.0-rc4lblk-fnext0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e4
RIP: 0010:null_init_zoned_dev+0x17a/0x27f [null_blk]
RSP: 0018:ffffc90007007e00 EFLAGS: 00010246
RAX: 0000000000000020 RBX: ffff8887fb3f3c00 RCX: 0000000000000007
RDX: 0000000000000000 RSI: ffff8887ca09d688 RDI: ffff888810fea510
RBP: 0000000000000010 R08: ffff8887ca09d688 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8887c26e8000
R13: ffffffffa05e9390 R14: 0000000000000000 R15: 0000000000000001
FS:  00007fcb5256f740(0000) GS:ffff888810e00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000010 CR3: 000000081e8fe000 CR4: 00000000003406e0
Call Trace:
 null_add_dev+0x534/0x71b [null_blk]
 nullb_device_power_store.cold.41+0x8/0x2e [null_blk]
 configfs_write_file+0xe6/0x150
 vfs_write+0xba/0x1e0
 ksys_write+0x5f/0xe0
 do_syscall_64+0x60/0x250
 entry_SYSCALL_64_after_hwframe+0x49/0xb3
RIP: 0033:0x7fcb51c71840
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Several strange crashes have been eventually traced back to
STRICT_KERNEL_RWX and its interaction with code patching.

Various paths in our ftrace, kprobes and other patching code need to
be hardened against patching failures, otherwise we can end up running
with partially/incorrectly patched ftrace paths, kprobes or jump
labels, which can then cause strange crashes.

Although fixes for those are in development, they're not -rc material.

There also seem to be problems with the underlying strict RWX logic,
which needs further debugging.

So for now disable STRICT_KERNEL_RWX on 64-bit to prevent people from
enabling the option and tripping over the bugs.

Fixes: 1e0fc9d1 ("powerpc/Kconfig: Enable STRICT_KERNEL_RWX for some configs")
Cc: stable@vger.kernel.org # v4.13+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200520133605.972649-1-mpe@ellerman.id.au

arch/riscv/mm/init.c: In function ‘print_vm_layout’:
arch/riscv/mm/init.c:68:37: error: ‘FIXADDR_START’ undeclared (first use in this function);
arch/riscv/mm/init.c:69:20: error: ‘FIXADDR_TOP’ undeclared
arch/riscv/mm/init.c:70:37: error: ‘PCI_IO_START’ undeclared
arch/riscv/mm/init.c:71:20: error: ‘PCI_IO_END’ undeclared
arch/riscv/mm/init.c:72:38: error: ‘VMEMMAP_START’ undeclared
arch/riscv/mm/init.c:73:20: error: ‘VMEMMAP_END’ undeclared (first use in this function);
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

[Why]
We dropped the delay after changed the cursor functions locking the
entire pipe to locking just the CURSOR registers to fix page flip
stuttering - this introduced cursor stuttering instead, and an underflow
issue.

The cursor update can be delayed indefinitely if the cursor update
repeatedly happens right around VUPDATE.

The underflow issue can happen if we do a viewport update on a pipe
on the same frame where a cursor update happens around VUPDATE - the
old cursor registers are retained which can be in an invalid position.

This can cause a pipe hang and indefinite underflow.

[How]
The complex, ideal solution to the problem would be a software
triple buffering mechanism from the DM layer to program only one cursor
update per frame just before VUPDATE.

The simple workaround until we have that infrastructure in place is
this change - bring back the delay until VUPDATE before locking, but
with some corrections to the calculations.

This didn't work for all timings before because the calculation for
VUPDATE was wrong - it was using the offset from VSTARTUP instead and
didn't correctly handle the case where VUPDATE could be in the back
porch.

Add a new hardware sequencer function to use the existing helper to
calculate the real VUPDATE start and VUPDATE end - VUPDATE can last
multiple lines after all.

Change the udelay to incorporate the width of VUPDATE as well.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

During the rework for removing the FPU issues, I found the following
warning:

 [..] dml_common_defs.o: warning: objtool: dml_round()+0x9: FPU
      instruction outside of kernel_fpu_{begin,end}()

This file has a single function that does not need to be in a specific
file. This commit drop dml_common_defs file, and move dml_round function
to dml_inline_defs.

CC: Christian König <christian.koenig@amd.com>
CC: Alexander Deucher <Alexander.Deucher@amd.com>
CC: Peter Zijlstra <peterz@infradead.org>
CC: Tony Cheng <tony.cheng@amd.com>
CC: Harry Wentland <hwentlan@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
DP training sequence to set SCRAMBLING_DISABLE bit properly based on
training pattern - per DP Spec.

[How]
Update dpcd_pattern.v1_4.SCRAMBLING_DISABLE with 1 for TPS1, TPS2, TPS3,
but not for TPS4.
Signed-off-by: Vladimir Stempen <vladimir.stempen@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Pull MTD fixes from Richard Weinberger:

 - Fix a PM regression in brcmnand driver

 - Propagate ECC information correctly on SPI-NAND

 - Make sure no MTD name is used multiple time in nvmem

* tag 'fixes-for-5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
  mtd:rawnand: brcmnand: Fix PM resume crash
  mtd: Fix mtd not registered due to nvmem name collision
  mtd: spinand: Propagate ECC information to the MTD structure

Pull UBI and UBIFS fixes from Richard Weinberger:

 - Correctly set next cursor for detailed_erase_block_info debugfs file

 - Don't use crypto_shash_descsize() for digest size in UBIFS

 - Remove broken lazytime support from UBIFS

* tag 'for-linus-5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
  ubi: Fix seq_file usage in detailed_erase_block_info debugfs file
  ubifs: fix wrong use of crypto_shash_descsize()
  ubifs: remove broken lazytime support

Pull UML fixes from Richard Weinberger:

 - Two missing includes which caused build issues on recent systems

 - Correctly set TRANS_GRE_LEN in our vector network driver

* tag 'for-linus-5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: Fix typo in vector driver transport option definition
  um: syscall.c: include <asm/unistd.h>
  um: Fix xor.h include

Pull power management fix from Rafael Wysocki:
 "This makes a recently introduced suspend-to-idle wakeup issue on Dell
  XPS13 9360 go away"

* tag 'pm-5.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: EC: PM: Avoid flushing EC work when EC GPE is inactive

Pull overlayfs fixes from Miklos Szeredi:
 "Fix two bugs introduced in this cycle and one introduced in v5.5"

* tag 'ovl-fixes-5.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
  ovl: potential crash in ovl_fid_to_fh()
  ovl: clear ATTR_OPEN from attr->ia_valid
  ovl: clear ATTR_FILE from attr->ia_valid

syzbot is reporting that splice()ing from non-empty read side to
already-full write side causes unkillable task, for opipe_prep() is by
error not inverting pipe_full() test.

  CPU: 0 PID: 9460 Comm: syz-executor.5 Not tainted 5.6.0-rc3-next-20200228-syzkaller #0
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
  RIP: 0010:rol32 include/linux/bitops.h:105 [inline]
  RIP: 0010:iterate_chain_key kernel/locking/lockdep.c:369 [inline]
  RIP: 0010:__lock_acquire+0x6a3/0x5270 kernel/locking/lockdep.c:4178
  Call Trace:
     lock_acquire+0x197/0x420 kernel/locking/lockdep.c:4720
     __mutex_lock_common kernel/locking/mutex.c:956 [inline]
     __mutex_lock+0x156/0x13c0 kernel/locking/mutex.c:1103
     pipe_lock_nested fs/pipe.c:66 [inline]
     pipe_double_lock+0x1a0/0x1e0 fs/pipe.c:104
     splice_pipe_to_pipe fs/splice.c:1562 [inline]
     do_splice+0x35f/0x1520 fs/splice.c:1141
     __do_sys_splice fs/splice.c:1447 [inline]
     __se_sys_splice fs/splice.c:1427 [inline]
     __x64_sys_splice+0x2b5/0x320 fs/splice.c:1427
     do_syscall_64+0xf6/0x790 arch/x86/entry/common.c:295
     entry_SYSCALL_64_after_hwframe+0x49/0xbe

Reported-by: syzbot+b48daca8639150bc5e73@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=9386d051e11e09973d5a4cf79af5e8cedf79386d
Fixes: 8cefc107 ("pipe: Use head and tail pointers for the ring, not cursor and length")
Cc: stable@vger.kernel.org # 5.5+
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In io_sq_thread(), currently if we get an -EBUSY error and go to sleep,
we will won't clear it again, which will result in io_sq_thread() will
never have a chance to submit sqes again. Below test program test.c
can reveal this bug:

int main(int argc, char *argv[])
{
        struct io_uring ring;
        int i, fd, ret;
        struct io_uring_sqe *sqe;
        struct io_uring_cqe *cqe;
        struct iovec *iovecs;
        void *buf;
        struct io_uring_params p;

        if (argc < 2) {
                printf("%s: file\n", argv[0]);
                return 1;
        }

        memset(&p, 0, sizeof(p));
        p.flags = IORING_SETUP_SQPOLL;
        ret = io_uring_queue_init_params(4, &ring, &p);
        if (ret < 0) {
                fprintf(stderr, "queue_init: %s\n", strerror(-ret));
                return 1;
        }

        fd = open(argv[1], O_RDONLY | O_DIRECT);
        if (fd < 0) {
                perror("open");
                return 1;
        }

        iovecs = calloc(10, sizeof(struct iovec));
        for (i = 0; i < 10; i++) {
                if (posix_memalign(&buf, 4096, 4096))
                        return 1;
                iovecs[i].iov_base = buf;
                iovecs[i].iov_len = 4096;
        }

        ret = io_uring_register_files(&ring, &fd, 1);
        if (ret < 0) {
                fprintf(stderr, "%s: register %d\n", __FUNCTION__, ret);
                return ret;
        }

        for (i = 0; i < 10; i++) {
                sqe = io_uring_get_sqe(&ring);
                if (!sqe)
                        break;

                io_uring_prep_readv(sqe, 0, &iovecs[i], 1, 0);
                sqe->flags |= IOSQE_FIXED_FILE;

                ret = io_uring_submit(&ring);
                sleep(1);
                printf("submit %d\n", i);
        }

        for (i = 0; i < 10; i++) {
                io_uring_wait_cqe(&ring, &cqe);
                printf("receive: %d\n", i);
                if (cqe->res != 4096) {
                        fprintf(stderr, "ret=%d, wanted 4096\n", cqe->res);
                        ret = 1;
                }
                io_uring_cqe_seen(&ring, cqe);
        }

        close(fd);
        io_uring_queue_exit(&ring);
        return 0;
}
sudo ./test testfile
above command will hang on the tenth request, to fix this bug, when io
sq_thread is waken up, we reset the variable 'ret' to be zero.
Suggested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

This reverts commit 697ece78.

The implementation of SWAP on powerpc requires page protection
bits to not be one of the least significant PTE bits.

Until the SWAP implementation is changed and this requirement voids,
we have to keep at least _PAGE_RW outside of the 3 last bits.

For now, revert to previous PTE bits order. A further rework
may come later.

Fixes: 697ece78 ("powerpc/32s: reorder Linux PTE bits to better match Hash PTE bits.")
Reported-by: Rui Salvaterra <rsalvaterra@gmail.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b34706f8de87f84d135abb5f3ede6b6f16fb1f41.1589969799.git.christophe.leroy@csgroup.eu