- 06 Aug, 2021 8 commits
-
-
Shirish S authored
DMUB firmware info is printed before it gets initialized. Correct this order to ensure true value is conveyed. Signed-off-by:
Shirish S <shirish.s@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Qingqing Zhuo authored
[Why] HPD disable and enable sequences are not mutually exclusive on Linux. For HPDs that spans over 1s (i.e. HPD low = 1s), part of the disable sequence (specifically, a request to SMU to lower refclk) could come right before the call to PHY enable, causing DMUB to access an unresponsive PHY and thus a hard hang on the system. [How] Disable 48mhz refclk off on native DP. Reviewed-by:
Hersen Wu <hersenxs.wu@amd.com> Acked-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by:
Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by:
-
Jude Shih authored
[Why] On S4 resume we also need to fix detection of when to reload DMCUB firmware because we're currently using the VBIOS version which isn't compatible with the driver version. [How] Update the hardware init check for DCN31 since it's the ASIC that has this issue. Reviewed-by:
Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by:
Jude Shih <jude.shih@amd.com> Signed-off-by:
-
Bing Guo authored
[Why&How] Hardware team suggested to use SRExitTime= 35.5us as w/a to prevent underflow in certain modes. Reviewed-by:
Martin Leung <martin.leung@amd.com> Acked-by:
Bing Guo <bing.guo@amd.com> Signed-off-by:
-
Bing Guo authored
Why: In DCN2x, HW doesn't automatically divide MASTER_UPDATE_LOCK_DB_X by the number of pipes ODM Combined. How: Set MASTER_UPDATE_LOCK_DB_X to the value that is adjusted by the number of pipes ODM Combined. Reviewed-by:
-
Wesley Chalmers authored
[WHY] For DCN31 onward, LTTPR is to be enabled and set to Transparent by VBIOS. Driver is to assume that VBIOS has done this without needing to check the VBIOS interop bit. [HOW] Add LTTPR enable and interop VBIOS bits into dc->caps, and force-set the interop bit to true for DCN31+. Reviewed-by:
Jun Lei <Jun.Lei@amd.com> Acked-by:
Wesley Chalmers <Wesley.Chalmers@amd.com> Signed-off-by:
-
Randy Dunlap authored
'pm_suspend_target_state' is only available when CONFIG_PM_SLEEP is set/enabled. OTOH, when both SUSPEND and HIBERNATION are not set, PM_SLEEP is not set, so this variable cannot be used. ../drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c: In function ‘amdgpu_acpi_is_s0ix_active’: ../drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:1046:11: error: ‘pm_suspend_target_state’ undeclared (first use in this function); did you mean ‘__KSYM_pm_suspend_target_state’? return pm_suspend_target_state == PM_SUSPEND_TO_IDLE; ^~~~~~~~~~~~~~~~~~~~~~~ __KSYM_pm_suspend_target_state Also use shorter IS_ENABLED(CONFIG_foo) notation for checking the 2 config symbols. Fixes: 91e27371 ("drm/amdgpu: Check pmops for desired suspend state") Signed-off-by:Randy Dunlap <rdunlap@infradead.org> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Cc: linux-next@vger.kernel.org Signed-off-by:
-
Xiaomeng Hou authored
Correct yellow carp driver-PMFW interface version to v4. Signed-off-by:
Xiaomeng Hou <Xiaomeng.Hou@amd.com> Acked-by:
-
- 30 Jul, 2021 2 commits
-
-
Yifan Zhang authored
If GC has entered CGPG, ringing doorbell > first page doesn't wakeup GC. Enlarge CP_MEC_DOORBELL_RANGE_UPPER to workaround this issue. Signed-off-by:
Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by:
-
xinhui pan authored
If one GTT BO has been evicted/swapped out, it should sit in CPU domain. TTM only alloc struct ttm_resource instead of struct ttm_range_mgr_node for sysMem. Now when we update mapping for such invalidated BOs, we might walk out of bounds of struct ttm_resource. Three possible fix: 1) Let sysMem manager alloc struct ttm_range_mgr_node, like ttm_range_manager does. 2) Pass pages_addr to update_mapping function too, but need memset pages_addr[] to zero when unpopulate. 3) Init amdgpu_res_cursor directly. bug is detected by kfence. ================================================================== BUG: KFENCE: out-of-bounds read in amdgpu_vm_bo_update_mapping+0x564/0x6e0 Out-of-bounds read at 0x000000008ea93fe9 (64B right of kfence-#167): amdgpu_vm_bo_update_mapping+0x564/0x6e0 [amdgpu] amdgpu_vm_bo_update+0x282/0xa40 [amdgpu] amdgpu_vm_handle_moved+0x19e/0x1f0 [amdgpu] amdgpu_cs_vm_handling+0x4e4/0x640 [amdgpu] amdgpu_cs_ioctl+0x19e7/0x23c0 [amdgpu] drm_ioctl_kernel+0xf3/0x180 [drm] drm_ioctl+0x2cb/0x550 [drm] amdgpu_drm_ioctl+0x5e/0xb0 [amdgpu] kfence-#167 [0x000000008e11c055-0x000000001f676b3e ttm_sys_man_alloc+0x35/0x80 [ttm] ttm_resource_alloc+0x39/0x50 [ttm] ttm_bo_swapout+0x252/0x5a0 [ttm] ttm_device_swapout+0x107/0x180 [ttm] ttm_global_swapout+0x6f/0x130 [ttm] ttm_tt_populate+0xb1/0x2a0 [ttm] ttm_bo_handle_move_mem+0x17e/0x1d0 [ttm] ttm_mem_evict_first+0x59d/0x9c0 [ttm] ttm_bo_mem_space+0x39f/0x400 [ttm] ttm_bo_validate+0x13c/0x340 [ttm] ttm_bo_init_reserved+0x269/0x540 [ttm] amdgpu_bo_create+0x1d1/0xa30 [amdgpu] amdgpu_bo_create_user+0x40/0x80 [amdgpu] amdgpu_gem_object_create+0x71/0xc0 [amdgpu] amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu+0x2f2/0xcd0 [amdgpu] kfd_ioctl_alloc_memory_of_gpu+0xe2/0x330 [amdgpu] kfd_ioctl+0x461/0x690 [amdgpu] Signed-off-by:
xinhui pan <xinhui.pan@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
- 29 Jul, 2021 4 commits
-
-
Dave Airlie authored
Merge tag 'amd-drm-fixes-5.14-2021-07-28' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.14-2021-07-28: amdgpu: - Fix resource leak in an error path - Avoid stack contents exposure in error path - pmops check fix for S0ix vs S3 - DCN 2.1 display fixes - DCN 2.0 display fix - Backlight control fix for laptops with HDR panels - Maintainers updates Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210729025817.4145-1-alexander.deucher@amd.com
-
Dave Airlie authored
Merge tag 'drm-intel-fixes-2021-07-28' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes Display related fixes: - Fix vbt port mask - Fix around reading the right DSC disable fuse in display_ver 10 - Split display version 9 and 10 in intel_setup_outputs Signed-off-by:
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
Short summary of fixes pull: * panel: Fix bpc for ytc700tlag_05_201c * ttm: debugfs init fixes Signed-off-by:
-
https://gitlab.freedesktop.org/drm/msmDave Airlie authored
A few fixes for v5.14, including a fix for a crash if display triggers an iommu fault (which tends to happen at probe time on devices with bootloader fw that leaves display enabled as kernel starts) Signed-off-by:
-
- 27 Jul, 2021 13 commits
-
-
Simon Ser authored
Add links to the issue tracker and the IRC channel for the amdgpu driver. Signed-off-by:
Simon Ser <contact@emersion.fr> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Pan Xinhui <Xinhui.Pan@amd.com> Signed-off-by:
-
Alex Deucher authored
We've gotten a number of reports about backlight control not working on panels which indicate that they use aux backlight control. A recent patch: commit 2d73eabe Author: Camille Cho <Camille.Cho@amd.com> Date: Thu Jul 8 18:28:37 2021 +0800 drm/amd/display: Only set default brightness for OLED [Why] We used to unconditionally set backlight path as AUX for panels capable of backlight adjustment via DPCD in set default brightness. [How] This should be limited to OLED panel only since we control backlight via PWM path for SDR mode in LCD HDR panel. Reviewed-by:
Krunoslav Kovac <krunoslav.kovac@amd.com> Acked-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by:
Camille Cho <Camille.Cho@amd.com> Signed-off-by:
Roman Li <Roman.Li@amd.com> Signed-off-by:
-
Dale Zhao authored
[Why] We don't check DENTIST_DISPCLK_CHG_DONE to ensure dentist display clockis updated to target value. In some scenarios with large display clock margin, it will deliver unfinished display clock and cause issues like display black screen. [How] Checking DENTIST_DISPCLK_CHG_DONE to ensure display clock has been update to target value before driver do other clock related actions. Reviewed-by:
Cyr Aric <aric.cyr@amd.com> Acked-by:
Solomon Chiu <solomon.chiu@amd.com> Signed-off-by:
Dale Zhao <dale.zhao@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
-
Victor Lu authored
[why] IP parameter min_meta_chunk_size_bytes is read for bandwidth calculations but it was never defined. [how] Define min_meta_chunk_size_bytes and initialize value to 256. Reviewed-by:
Laktyushkin Dmytro <dmytro.laktyushkin@amd.com> Acked-by:
Victor Lu <victorchengchi.lu@amd.com> Tested-by:
-
Victor Lu authored
[why] DST_Y_PREFETCH can overflow when DestinationLinesForPrefetch values are too large due to the former being limited to 8 bits. [how] Set the maximum value of DestinationLinesForPrefetch to be 255 * refclk period. Reviewed-by:
-
Pratik Vishwakarma authored
[Why] User might change the suspend behaviour from OS. [How] Check with pm for target suspend state and set s0ix flag only for s2idle state. v2: User might change default suspend state, use target state v3: squash in build fix Suggested-by:
Lijo Lazar <Lijo.Lazar@amd.com> Signed-off-by:
Pratik Vishwakarma <Pratik.Vishwakarma@amd.com> Reviewed-by:
-
Sean Paul authored
Avoids the following WARN: [ 3.009556] ------------[ cut here ]------------ [ 3.014306] WARNING: CPU: 7 PID: 109 at drivers/gpu/drm/drm_dp_helper.c:1796 drm_dp_aux_register+0xa4/0xac [ 3.024209] Modules linked in: [ 3.027351] CPU: 7 PID: 109 Comm: kworker/7:8 Not tainted 5.10.47 #69 [ 3.033958] Hardware name: Google Lazor (rev1 - 2) (DT) [ 3.039323] Workqueue: events deferred_probe_work_func [ 3.044596] pstate: 60c00009 (nZCv daif +PAN +UAO -TCO BTYPE=--) [ 3.050761] pc : drm_dp_aux_register+0xa4/0xac [ 3.055329] lr : dp_aux_register+0x40/0x88 [ 3.059538] sp : ffffffc010ad3920 [ 3.062948] x29: ffffffc010ad3920 x28: ffffffa64196ac70 [ 3.067239] mmc1: Command Queue Engine enabled [ 3.068406] x27: ffffffa64196ac68 x26: 0000000000000001 [ 3.068407] x25: 0000000000000002 x24: 0000000000000060 [ 3.068409] x23: ffffffa642ab3400 x22: ffffffe126c10e5b [ 3.068410] x21: ffffffa641dc3188 x20: ffffffa641963c10 [ 3.068412] x19: ffffffa642aba910 x18: 00000000ffff0a00 [ 3.068414] x17: 000000476f8e002a x16: 00000000000000b8 [ 3.073008] mmc1: new HS400 Enhanced strobe MMC card at address 0001 [ 3.078448] x15: ffffffffffffffff x14: ffffffffffffffff [ 3.078450] x13: 0000000000000030 x12: 0000000000000030 [ 3.078452] x11: 0101010101010101 x10: ffffffe12647a914 [ 3.078453] x9 : ffffffe12647a8cc x8 : 0000000000000000 [ 3.084452] mmcblk1: mmc1:0001 DA4032 29.1 GiB [ 3.089372] [ 3.089372] x7 : 6c6064717372fefe x6 : ffffffa642b11494 [ 3.089374] x5 : 0000000000000000 x4 : 6d006c657869ffff [ 3.089375] x3 : 000000006c657869 x2 : 000000000000000c [ 3.089376] x1 : ffffffe126c3ae3c x0 : ffffffa642aba910 [ 3.089381] Call trace: [ 3.094931] mmcblk1boot0: mmc1:0001 DA4032 partition 1 4.00 MiB [ 3.100291] drm_dp_aux_register+0xa4/0xac [ 3.100292] dp_aux_register+0x40/0x88 [ 3.100294] dp_display_bind+0x64/0xcc [ 3.100295] component_bind_all+0xdc/0x210 [ 3.100298] msm_drm_bind+0x1e8/0x5d4 [ 3.100301] try_to_bring_up_master+0x168/0x1b0 [ 3.105861] mmcblk1boot1: mmc1:0001 DA4032 partition 2 4.00 MiB [ 3.112282] __component_add+0xa0/0x158 [ 3.112283] component_add+0x1c/0x28 [ 3.112284] dp_display_probe+0x33c/0x380 [ 3.112286] platform_drv_probe+0x9c/0xbc [ 3.112287] really_probe+0x140/0x35c [ 3.112289] driver_probe_device+0x84/0xc0 [ 3.112292] __device_attach_driver+0x94/0xb0 [ 3.117967] mmcblk1rpmb: mmc1:0001 DA4032 partition 3 16.0 MiB, chardev (239:0) [ 3.123201] bus_for_each_drv+0x8c/0xd8 [ 3.123202] __device_attach+0xc4/0x150 [ 3.123204] device_initial_probe+0x1c/0x28 [ 3.123205] bus_probe_device+0x3c/0x9c [ 3.123206] deferred_probe_work_func+0x90/0xcc [ 3.123211] process_one_work+0x218/0x3ec [ 3.131976] mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 3.134123] worker_thread+0x288/0x3e8 [ 3.134124] kthread+0x148/0x1b0 [ 3.134127] ret_from_fork+0x10/0x30 [ 3.134128] ---[ end trace cfb9fce3f70f824d ]--- Signed-off-by:
Sean Paul <seanpaul@chromium.org> Reviewed-by:
Abhinav Kumar <abhinavk@codeaurora.org> Link: https://lore.kernel.org/r/20210714152910.55093-1-sean@poorly.runSigned-off-by:
Rob Clark <robdclark@chromium.org>
-
Kuogee Hsieh authored
There is a scenario that dp cable is unplugged from DUT during system suspended will cause audio option state does not match real connection state. Fix this problem by Signaling audio plugged change with realtime connection status at dp_pm_resume() so that audio option will be in correct state after system resumed. Changes in V2: -- correct Fixes tag commit id. Fixes: f591dbb5 ("drm/msm/dp: power off DP phy at suspend") Signed-off-by:
Kuogee Hsieh <khsieh@codeaurora.org> Reviewed-by:
Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/1627059339-12142-1-git-send-email-khsieh@codeaurora.orgSigned-off-by:
-
Bjorn Andersson authored
Some bootloaders set the widebus enable bit in the INTF_CONFIG register, but configuration of widebus isn't yet supported ensure that the register has a known value, with widebus disabled. Fixes: c943b494 ("drm/msm/dp: add displayPort driver support") Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by:
-
Kuogee Hsieh authored
DP cable should always connect to DPU during the entire PHY compliance testing run. Since DP PHY compliance test is executed at irq_hpd event context, dp_ctrl_off_link_stream() should be used instead of dp_ctrl_off(). dp_ctrl_off() is used for unplug event which is triggered when DP cable is dis connected. Changes in V2: -- add fixes statement Fixes: f21c8a27 ("drm/msm/dp: handle irq_hpd with sink_count = 0 correctly") Signed-off-by:
-
Rob Clark authored
It turns out that when the display is enabled by the bootloader, we can get some transient iommu faults from the display. Which doesn't go over too well when we install a fault handler that is gpu specific. To avoid this, defer installing the fault handler until we get around to setting up per-process pgtables (which is adreno_smmu specific). The arm-smmu fallback error reporting is sufficient for reporting display related faults (and in fact was all we had prior to f8f934c1) Reported-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reported-by:
Yassine Oudjana <y.oudjana@protonmail.com> Fixes: 2a574cc0 ("drm/msm: Improve the a6xx page fault handler") Signed-off-by:
John Stultz <john.stultz@linaro.org> Tested-by:
-
Robert Foss authored
The downstream dts lists this value as 0x494, and not 0x45c. Fixes: af776a3e ("drm/msm/dpu: add SM8250 to hw catalog") Signed-off-by:
Robert Foss <robert.foss@linaro.org> Reviewed-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Link: https://lore.kernel.org/r/20210628085033.9905-1-robert.foss@linaro.orgSigned-off-by:
-
Thomas Zimmermann authored
Backmerging to get tree to v5.14-rc3, as requested by Daniel. Signed-off-by:Thomas Zimmermann <tzimmermann@suse.de>
-
- 26 Jul, 2021 5 commits
-
-
Jiri Kosina authored
In case when psp_init_asd_microcode() fails to load ASD microcode file, psp_v12_0_init_microcode() tries to print the firmware filename that failed to load before bailing out. This is wrong because: - the firmware filename it would want it print is an incorrect one as psp_init_asd_microcode() and psp_v12_0_init_microcode() are loading different filenames - it tries to print fw_name, but that's not yet been initialized by that time, so it prints random stack contents, e.g. amdgpu 0000:04:00.0: Direct firmware load for amdgpu/renoir_asd.bin failed with error -2 amdgpu 0000:04:00.0: amdgpu: fail to initialize asd microcode amdgpu 0000:04:00.0: amdgpu: psp v12.0: Failed to load firmware "\xfeTO\x8e\xff\xff" Fix that by bailing out immediately, instead of priting the bogus error message. Reported-by:Vojtech Pavlik <vojtech@ucw.cz> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Jiri Kosina authored
This reverts commit 4192f7b5. It is not true (as stated in the reverted commit changelog) that we never unmap the BAR on failure; it actually does happen properly on amdgpu_driver_load_kms() -> amdgpu_driver_unload_kms() -> amdgpu_device_fini() error path. What's worse, this commit actually completely breaks resource freeing on probe failure (like e.g. failure to load microcode), as amdgpu_driver_unload_kms() notices adev->rmmio being NULL and bails too early, leaving all the resources that'd normally be freed in amdgpu_acpi_fini() and amdgpu_device_fini() still hanging around, leading to all sorts of oopses when someone tries to, for example, access the sysfs and procfs resources which are still around while the driver is gone. Fixes: 4192f7b5 ("drm/amdgpu: unmap register bar on device init failure") Reported-by:
-
Lucas De Marchi authored
Commit 5a9d38b2 ("drm/i915/display: hide workaround for broken vbt in intel_bios.c") moved the workaround for broken or missing VBT to intel_bios.c. However is_port_valid() only protects the handling of different skus of the same display version. Since in intel_setup_outputs() we share the code path with version 9, this would also create port F for SKL/KBL, which does not exist. Missing VBT can be reproduced when starting a headless QEMU with no opregion available. Avoid the issue by splitting versions 9 and 10 in intel_setup_outputs(), which also makes it more clear what code path it's taking for each version. v2: move generic display version after Geminilake since that one has a different set of outputs Fixes: 5a9d38b2 ("drm/i915/display: hide workaround for broken vbt in intel_bios.c") Cc: Jani Nikula <jani.nikula@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reported-by:
Christoph Hellwig <hch@infradead.org> Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
Matt Roper <matthew.d.roper@intel.com> Tested-by:
Christoph Hellwig <hch@lst.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210722232922.3796835-1-lucas.demarchi@intel.com (cherry picked from commit ec387b8f) Signed-off-by:
-
Lucas De Marchi authored
We were using GRAPHICS_VER() to handle SKL_DFSM register, which means we were not handling GLK correctly since that has GRAPHICS_VER == 9, but DISPLAY_VER == 10. Switch the entire branch to check DISPLAY_VER which makes it more in line with Bspec. Even though the Bspec has an exception for RKL in TGL_DFSM_PIPE_D_DISABLE, we don't have to do anything as the bit has disable semantic and RKL doesn't have pipe D. Bspec: 50075, 7548 Fixes: 2b5a4562 ("drm/i915/display: Simplify GLK display version tests") Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
Rodrigo Vivi authored
PORT_A to PORT_F are regular integers defined in the enum port, while for_each_port_masked requires a bit mask for the ports. Current given mask: 0b111 Desired mask: 0b111111 I noticed this while Christoph was reporting a bug found on headless GVT configuration which bisect blamed commit 3ae04c0c ("drm/i915/bios: limit default outputs to ports A through F") v2: Avoid unnecessary line continuations as pointed by CI and Christoph Cc: Christoph Hellwig <hch@infradead.org> Fixes: 3ae04c0c ("drm/i915/bios: limit default outputs to ports A through F") Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Reviewed-by:
-
- 25 Jul, 2021 8 commits
-
-
Linus Torvalds authored
-
Jagan Teki authored
ytc700tlag_05_201c panel support 8 bpc not 6 bpc as per recent testing in i.MX8MM platform. Fix it. Fixes: 7a1f4fa4 ("drm/panel: simple: Add YTC700TLAG-05-201C") Signed-off-by:
Jagan Teki <jagan@amarulasolutions.com> Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210725174737.891106-1-jagan@amarulasolutions.com
-
Linus Torvalds authored
gcc doesn't care, but clang quite reasonably pointed out that the recent commit e9ba16e6 ("smpboot: Mark idle_init() as __always_inlined to work around aggressive compiler un-inlining") did some really odd things: kernel/smpboot.c:50:20: warning: duplicate 'inline' declaration specifier [-Wduplicate-decl-specifier] static inline void __always_inline idle_init(unsigned int cpu) ^ which not only has that duplicate inlining specifier, but the new __always_inline was put in the wrong place of the function definition. We put the storage class specifiers (ie things like "static" and "extern") first, and the type information after that. And while the compiler may not care, we put the inline specifier before the types. So it should be just static __always_inline void idle_init(unsigned int cpu) instead. Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - Fix guest to host memory corruption in H_RTAS due to missing nargs check. - Fix guest triggerable host crashes due to bad handling of nested guest TM state. - Fix possible crashes due to incorrect reference counting in kvm_arch_vcpu_ioctl(). - Two commits fixing some regressions in KVM transactional memory handling introduced by the recent rework of the KVM code. Thanks to Nicholas Piggin, Alexey Kardashevskiy, and Michael Neuling. * tag 'powerpc-5.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: KVM: PPC: Book3S HV Nested: Sanitise H_ENTER_NESTED TM state KVM: PPC: Book3S: Fix H_RTAS rets buffer overflow KVM: PPC: Fix kvm_arch_vcpu_ioctl vcpu_load leak KVM: PPC: Book3S: Fix CONFIG_TRANSACTIONAL_MEM=n crash KVM: PPC: Book3S HV P9: Fix guest TM support
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Thomas Gleixner: "A small set of timer related fixes: - Plug a race between rearm and process tick in the posix CPU timers code - Make the optimization to avoid recalculation of the next timer interrupt work correctly when there are no timers pending" * tag 'timers-urgent-2021-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timers: Fix get_next_timer_interrupt() with no timers pending posix-cpu-timers: Fix rearm racing against process tick -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 jump label fix from Thomas Gleixner: "A single fix for jump labels to prevent the compiler from agressive un-inlining which results in a section mismatch" * tag 'locking-urgent-2021-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: jump_labels: Mark __jump_label_transform() as __always_inlined to work around aggressive compiler un-inlining
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull EFI fixes from Thomas Gleixner: "A set of EFI fixes: - Prevent memblock and I/O reserved resources to get out of sync when EFI memreserve is in use. - Don't claim a non-existing table is invalid - Don't warn when firmware memory is already reserved correctly" * tag 'efi-urgent-2021-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi/mokvar: Reserve the table only if it is in boot services data efi/libstub: Fix the efi_load_initrd function description firmware/efi: Tell memblock about EFI iomem reservations efi/tpm: Differentiate missing and invalid final event log table. -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull core fix from Thomas Gleixner: "A single update for the boot code to prevent aggressive un-inlining which causes a section mismatch" * tag 'core-urgent-2021-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: smpboot: Mark idle_init() as __always_inlined to work around aggressive compiler un-inlining
-
