Add a compatible for the Aries Embedded M100PFSEVP SOM + EVK platform.

Link: https://www.aries-embedded.com/polarfire-soc-fpga-microsemi-m100pfs-som-mpfs025t-pcie-serdesSigned-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Rob Herring <robh@kernel.org>

The icicle kit reference design's v2022.09 release made some changes
to the memory map - including adding the ability to read the fabric
clock controllers via the system controller bus & making the PCI
controller work with upstream Linux.

While the PCI was not working in the v2022.03 design, so nothing is
broken there in terms of backwards compatibility, the fabric clocks
used in the v2022.03 design were chosen by the individual run of the
synthesis tool. In the v2022.09 reference design, the clocks are fixed
to use the "north west" fabric Clock Conditioning Circuitry.

In the v2022.10 release, the memory map on the DDR side is also
changing, so to avoid making a breaking change here twice, jump over the
v2022.09 release and straight to the v2022.10 one.

Make use of a new compatible to denote that v2022.{09,10} reference
design releases are not backwards compatible.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>

The "hard" QSPI peripheral on PolarFire SoC is derived from version 2
of the FPGA IP core. The original binding had no fallback etc, so this
device tree is valid as is. There was also no functional driver for the
QSPI IP, so no device with a devicetree from a previous mainline
release will regress.

Link: https://lore.kernel.org/linux-spi/7c9f0d96-2882-964a-cd1f-916ddb3f0410@linaro.org/Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Pull more RISC-V updates from Palmer Dabbelt:
 "There's still a handful of new features in here, but there are a lot
  of fixes/cleanups as well:

   - Support for the Zicbom extension for explicit cache-block
     management, along with the necessary bits to make the non-standard
     cache management ops on the Allwinner D1 function

   - Support for the Zihintpause extension, which codifies a go-slow
     instruction used for cpu_relax()

   - Support for the Sstc extension for supervisor-mode timer/counter
     management

   - Many device tree fixes and cleanups, including a large set for the
     Canaan device trees

   - A handful of fixes and cleanups for the PMU driver"

* tag 'riscv-for-linus-5.20-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (43 commits)
  dt-bindings: gpio: sifive: add gpio-line-names
  wireguard: selftests: set CONFIG_NONPORTABLE on riscv32
  RISC-V: KVM: Support sstc extension
  RISC-V: Improve SBI definitions
  RISC-V: Move counter info definition to sbi header file
  RISC-V: Fix SBI PMU calls for RV32
  RISC-V: Update user page mapping only once during start
  RISC-V: Fix counter restart during overflow for RV32
  RISC-V: Prefer sstc extension if available
  RISC-V: Enable sstc extension parsing from DT
  RISC-V: Add SSTC extension CSR details
  riscv:uprobe fix SR_SPIE set/clear handling
  dt-bindings: riscv: fix SiFive l2-cache's cache-sets
  riscv: ensure cpu_ops_sbi is declared
  RISC-V: cpu_ops_spinwait.c should include head.h
  RISC-V: Declare cpu_ops_spinwait in <asm/cpu_ops.h>
  riscv: dts: starfive: correct number of external interrupts
  riscv: dts: sifive unmatched: Add PWM controlled LEDs
  riscv/purgatory: Omit use of bin2c
  riscv/purgatory: hard-code obj-y in Makefile
  ...

Pull devicetree fixes from Rob Herring:

 - Fix schema warnings in qcom,ipq6018-pinctrl and sdhci-msm

 - Convert Qualcomm SPMI PMIC to DT schema

 - Make secure interrupt optional for arm,mhu

 - Fix google,cros-ec-typec binding allowed properties

 - Update a bunch of bouncing email addresses

* tag 'devicetree-fixes-for-6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: chrome: google,cros-ec-typec: restrict allowed properties
  dt-bindings: Drop Dan Murphy and Ricardo Rivera-Matos
  dt-bindings: Drop Robert Jones
  dt-bindings: Drop Beniamin Bia and Stefan Popa
  dt-bindings: iio: Drop Bogdan Pricop
  dt-bindings: iio: Drop Joachim Eastwood
  dt-bindings: mailbox: arm,mhu: Make secure interrupt optional
  dt-bindings: pinctrl: qcom,ipq6018: Fix example 'gpio-ranges' size
  dt-bindings: Drop DT_MK_SCHEMA_FLAGS conditional selecting schema files
  dt-bindings: mfd: convert to yaml Qualcomm SPMI PMIC
  dt-bindings: mmc: sdhci-msm: Fix 'operating-points-v2 was unexpected' issue
  dt-bindings: display: simple-framebuffer: Drop Bartlomiej Zolnierkiewicz

Pull RTC updates from Alexandre Belloni:
 "New drivers:
   - Microchip PolarFire
   - Nuvoton NCT3018Y
   - TI K3 RTC

  Subsystem:
   - Replace flush_scheduled_work() with flush_work()
   - Remove deprecated ida_simple_get()/ida_simple_remove() calls

  Drivers:
   - use simple i2c probe where possible
   - sun6i: add R329 support
   - zynqmp: add calibration support
   - vr41xx: remove unused driver"

* tag 'rtc-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (31 commits)
  rtc: spear: set range max
  rtc: rtc-cmos: Do not check ACPI_FADT_LOW_POWER_S0
  rtc: zynqmp: initialize fract_tick
  rtc: Add NCT3018Y real time clock driver
  dt-bindings: rtc: nuvoton: add NCT3018Y Real Time Clock
  dt-bindings: rtc: nxp,pcf85063: Convert to DT schema
  dt-bindings: rtc: microcrystal,rv3032: Add missing type to 'trickle-voltage-millivolt'
  rtc: rx8025: fix 12/24 hour mode detection on RX-8035
  rtc: cros-ec: Only warn once in .remove() about notifier_chain problems
  rtc: vr41xx: remove driver
  rtc: mpfs: remove 'pending' variable from mpfs_rtc_wakeup_irq_handler()
  rtc: rv8803: fix missing unlock on error in rv8803_set_time()
  rtc: zynqmp: Add calibration set and get support
  rtc: zynqmp: Updated calibration value
  dt-bindings: rtc: zynqmp: Add clock information
  rtc: sun6i: add support for R329 RTC
  rtc: Directly use ida_alloc()/free()
  rtc: Introduce ti-k3-rtc
  dt-bindings: rtc: Add TI K3 RTC description
  dt-bindings: rtc: qcom-pm8xxx-rtc: Update the maintainers section
  ...

Describe exactly what properties are allowed in Google Chrome OS EC Type
C port, so the schema can properly validate the DTS.  Existing DTS
defines always connectors with unit addresses, not a sole "connector"
child.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220811062245.4316-1-krzysztof.kozlowski@linaro.org

Emails to Dan Murphy and Ricardo Rivera-Matos bounce ("550 Invalid
recipient").  Andrew Davis agreed to take over the bindings.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Andrew Davis <afd@ti.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220809162752.10186-6-krzysztof.kozlowski@linaro.org

Emails to Robert Jones bounce ("550 5.2.1 The email account that you
tried to reach is disabled").
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220809162752.10186-5-krzysztof.kozlowski@linaro.org

Emails to Beniamin Bia and Stefan Popa bounce ("550 5.1.10
RESOLVER.ADR.RecipientNotFound; Recipient not found by SMTP address
lookup").
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220809162752.10186-4-krzysztof.kozlowski@linaro.org

Emails to Bogdan Pricop bounce ("550 5.4.1 Recipient address rejected:
Access denied. AS(201806281)").
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220809162752.10186-3-krzysztof.kozlowski@linaro.org

Emails to Joachim Eastwood bounce ("552 5.2.2 The email account that you
tried to reach is over quota and inactive.").
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220809162752.10186-2-krzysztof.kozlowski@linaro.org

Pull sound fixes from Takashi Iwai:
 "Includes a few usual updates for HD- and USB-audio and a trivial
  cleanup patch"

* tag 'sound-fix-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda: Fix crash due to jack poll in suspend
  ALSA: hda/cirrus - support for iMac 12,1 model
  ALSA: usb-audio: make read-only array marker static const
  ALSA: hda/realtek: Add a quirk for HP OMEN 15 (8786) mute LED
  ALSA: usb-audio: More comprehensive mixer map for ASUS ROG Zenith II
  ALSA: scarlett2: Add Focusrite Clarett+ 8Pre support
  ALSA: hda/conexant: Add quirk for LENOVO 20149 Notebook model
  ALSA: ice1712: remove redundant assignment to new
  ALSA: hda/realtek: Add quirk for another Asus K42JZ model

Pull virtio updates from Michael Tsirkin:

 - A huge patchset supporting vq resize using the new vq reset
   capability

 - Features, fixes, and cleanups all over the place

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (88 commits)
  vdpa/mlx5: Fix possible uninitialized return value
  vdpa_sim_blk: add support for discard and write-zeroes
  vdpa_sim_blk: add support for VIRTIO_BLK_T_FLUSH
  vdpa_sim_blk: make vdpasim_blk_check_range usable by other requests
  vdpa_sim_blk: check if sector is 0 for commands other than read or write
  vdpa_sim: Implement suspend vdpa op
  vhost-vdpa: uAPI to suspend the device
  vhost-vdpa: introduce SUSPEND backend feature bit
  vdpa: Add suspend operation
  virtio-blk: Avoid use-after-free on suspend/resume
  virtio_vdpa: support the arg sizes of find_vqs()
  vhost-vdpa: Call ida_simple_remove() when failed
  vDPA: fix 'cast to restricted le16' warnings in vdpa.c
  vDPA: !FEATURES_OK should not block querying device config space
  vDPA/ifcvf: support userspace to query features and MQ of a management device
  vDPA/ifcvf: get_config_size should return a value no greater than dev implementation
  vhost scsi: Allow user to control num virtqueues
  vhost-scsi: Fix max number of virtqueues
  vdpa/mlx5: Support different address spaces for control and data
  vdpa/mlx5: Implement susupend virtqueue callback
  ...

Merge tag 'loongarch-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch updates from Huacai Chen:

 - Optimise getcpu() with vDSO

 - PCI enablement on top of pci & irqchip changes

 - Stack unwinder and stack trace support

 - Some bug fixes and build error fixes

 - Update the default config file

* tag 'loongarch-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  docs/zh_CN/LoongArch: Add I14 description
  docs/LoongArch: Add I14 description
  LoongArch: Update Loongson-3 default config file
  LoongArch: Add USER_STACKTRACE support
  LoongArch: Add STACKTRACE support
  LoongArch: Add prologue unwinder support
  LoongArch: Add guess unwinder support
  LoongArch: Add vDSO syscall __vdso_getcpu()
  LoongArch: Add PCI controller support
  LoongArch: Parse MADT to get multi-processor information
  LoongArch: Jump to the link address before enable PG
  LoongArch: Requires __force attributes for any casts
  LoongArch: Fix unsigned comparison with less than zero
  LoongArch: Adjust arch/loongarch/Kconfig
  LoongArch: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK

Pull power supply and reset updates from Sebastian Reichel:
 "No core patches, only driver updates:

   - pwr-mlxbf: new reset driver for Mellanox BlueField

   - at91-reset: SAMA7G5 support

   - ab8500: continue refurbishing

   - misc minor fixes"

* tag 'for-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (29 commits)
  power: supply: olpc_battery: Hold the reference returned by of_find_compatible_node
  power: supply: ab8500: add missing destroy_workqueue in ab8500_charger_bind
  power: supply: ab8500: Remove flush_scheduled_work() call.
  power: supply: ab8500_fg: drop duplicated 'is' in comment
  power: supply: ab8500: Drop external charger leftovers
  power: supply: ab8500: Add MAINTAINERS entry
  dt-bindings: power: reset: qcom,pshold: convert to dtschema
  power: supply: Fix typo in power_supply_check_supplies
  power: reset: pwr-mlxbf: change rst_pwr_hid and low_pwr_hid from global to local variables
  power: reset: pwr-mlxbf: add missing include
  power: reset: at91-reset: add support for SAMA7G5
  power: reset: at91-reset: add reset_controller_dev support
  power: reset: at91-reset: add at91_reset_data
  power: reset: at91-reset: document structures and enums
  dt-bindings: reset: add sama7g5 definitions
  dt-bindings: reset: atmel,at91sam9260-reset: add sama7g5 bindings
  dt-bindings: reset: convert Atmel/Microchip reset controller to YAML
  power: reset: pwr-mlxbf: add BlueField SoC power control driver
  power: supply: ab8500: Exit maintenance if too low voltage
  power: supply: ab8500: Respect charge_restart_voltage_uv
  ...

Pull another VFIO update from Alex Williamson:

 - Rename vfio source file to more easily allow additional source
   files in the upcoming development cycles (Jason Gunthorpe)

* tag 'vfio-v6.0-rc1pt2' of https://github.com/awilliam/linux-vfio:
  vfio: Move vfio.c to vfio_main.c

Commit 36d4b36b ("lib/nodemask: inline next_node_in() and
node_random()") removed the lib/nodemask.c file, but the remove didn't
happen when the patch was applied.
Reported-by: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix device tree schema validation messages like 'gpio-line-names'
does not match any of the regexes: 'pinctrl-[0-9]+' From schema: ...
sifive,gpio.yaml'.

The bindings were missing the gpio-line-names element, which was
causing the dt-schema checker to trip-up.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Atul Khare <atulkhare@rivosinc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20220803155539.800766-1-mail@conchuod.ieSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

When the CONFIG_PORTABLE/CONFIG_NONPORTABLE switches were added, various
configs were updated, but the wireguard config was forgotten about. This
leads to unbootable test kernels, causing CI fails. Add
CONFIG_NONPORTABLE=y to the wireguard test suite configuration for
riscv32.

Fixes: 44c1e84a ("RISC-V: Add CONFIG_{NON,}PORTABLE")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220809145757.83673-1-Jason@zx2c4.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Sstc extension allows the guest to program the vstimecmp CSR directly
instead of making an SBI call to the hypervisor to program the next
event. The timer interrupt is also directly injected to the guest by
the hardware in this case. To maintain backward compatibility, the
hypervisors also update the vstimecmp in an SBI set_time call if
the hardware supports it. Thus, the older kernels in guest also
take advantage of the sstc extension.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Acked-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/all/CAAhSdy2mb6wyqy0NAn9BcTWKMYEc0Z4zU3s3j7oNqBz6eDQ9sg@mail.gmail.com/Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

A series of mostly-independent fixes and cleanups for the RISC-V PMU
drivers.

Link: https://lore.kernel.org/lkml/CAAhSdy23vE8+HxU5Jxy2rBMjy3rBTrJt_4sriuROac_sEESSVw@mail.gmail.com/T/#m9de15aef1b65ae6155fa33ea1239578ef463c2a2

* palmer/riscv-pmu:
  RISC-V: Improve SBI definitions
  RISC-V: Move counter info definition to sbi header file
  RISC-V: Fix SBI PMU calls for RV32
  RISC-V: Update user page mapping only once during start
  RISC-V: Fix counter restart during overflow for RV32

I14 is also a kind of immediate operand in instruction, like I8/I12/I16/
I21/I26, add it in the Chinese documentation.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

I14 is also a kind of immediate operand in instruction, like I8/I12/I16/
I21/I26, add it in the English documentation.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

1, Add NVME related options;
2, Add compressed firmware support;
3, Add virtio drivers in order to run in qemu.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

To get the best stacktrace output, you can compile your userspace
programs with frame pointers (at least glibc + the app you are tracing).

1, export "CC = gcc -fno-omit-frame-pointer";
2, compile your programs with "CC";
3, use uprobe to get stacktrace output.

...
     echo 'p:malloc /usr/lib64/libc.so.6:0x0a4704 size=%r4:u64' > uprobe_events
     echo 'p:free /usr/lib64/libc.so.6:0x0a4d50 ptr=%r4:x64' >> uprobe_events
     echo 'comm == "demo"' > ./events/uprobes/malloc/filter
     echo 'comm == "demo"' > ./events/uprobes/free/filter
     echo 1 > ./options/userstacktrace
     echo 1 > ./options/sym-userobj
...
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

1. Use common arch_stack_walk() infrastructure to avoid duplicated code
   and avoid taking care of the stack storage and filtering.
2. Add sched_ra (means sched return address) and sched_cfa (means sched
   call frame address) to thread_info, and store them in switch_to().
3. Add __get_wchan() implementation.

Now we can print the process stack and wait channel by cat /proc/*/stack
and /proc/*/wchan.
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

It unwind the stack frame based on prologue code analyze.
CONFIG_KALLSYMS is needed, at least the address and length
of each function.

Three stages when we do unwind,
  1) unwind_start(), the prapare of unwinding, fill unwind_state.
  2) unwind_done(), judge whether the unwind process is finished or not.
  3) unwind_next_frame(), unwind the next frame.

Dividing unwinder helps to add new unwinders in the future, e.g.:
unwinder_frame, unwinder_orc, .etc.
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Name "guess unwinder" comes from x86, it scans the stack and reports
every kernel text address it finds.

Unwinders can be used by dump_stack() and other stacktrace functions.

Three stages when we do unwind,
  1) unwind_start(), the prapare of unwinding, fill unwind_state.
  2) unwind_done(), judge whether the unwind process is finished or not.
  3) unwind_next_frame(), unwind the next frame.

Add get_stack_info() to get stack info. At present we have irq stack and
task stack. The next_sp is the key info between two types of stacks.

Dividing unwinder helps to add new unwinders in the future.
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

We test 20 million times of getcpu(), the real syscall version take 25
seconds, while the vsyscall version take only 2.4 seconds.
Signed-off-by: Rui Wang <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Loongson64 based systems are PC-like systems which use PCI/PCIe as its
I/O bus, This patch adds the PCI host controller support for LoongArch.
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Parse MADT to get multi-processor information, in order to fix the boot
problem and cpu-hotplug problem for SMP platform.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

The kernel entry points of both boot CPU (i.e., kernel_entry) and non-
boot CPUs (i.e., smpboot_entry) may be physical address from BootLoader
(in DA mode or identity-mapping PG mode). So we should jump to the link
address before PG enabled (because DA is disabled at the same time) and
just after DMW configured.

Specifically: With some older firmwares, non-boot CPUs started with PG
enabled, but this need firmware cooperation in the form of a temporary
page table, which is deemed unnecessary. OTOH, latest firmware versions
configure the non-boot CPUs to start in DA mode, so kernel-side changes
are needed.
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

This fix a warning when "make C=2":
arch/loongarch/kernel/ptrace.c: note: in included file (through include/linux/uaccess.h, include/linux/sched/task.h, include/linux/sched/signal.h, include/linux/ptrace.h, include/linux/audit.h):
./arch/loongarch/include/asm/uaccess.h:232:32: warning: incorrect type in argument 2 (different address spaces)
./arch/loongarch/include/asm/uaccess.h:232:32:    expected void const *from
./arch/loongarch/include/asm/uaccess.h:232:32:    got void const [noderef] __user *from
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

The return value from the call to get_timer_irq() is int, which can be
a negative error code. However, the return value is being assigned to an
unsigned int variable 'irq', so making 'irq' an int.

Eliminate the following coccicheck warning:
./arch/loongarch/kernel/time.c:146:5-8: WARNING: Unsigned expression compared with zero: irq < 0
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

1, ACPI, EFI and SMP are mandatories for LoongArch, select them
unconditionally to avoid various build errors for 'make randconfig'.
2, Move the MMU_GATHER_MERGE_VMAS selection to the correct place.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

When CONFIG_CPUMASK_OFFSTACK and CONFIG_DEBUG_PER_CPU_MAPS is selected,
cpu_max_bits_warn() generates a runtime warning similar as below while
we show /proc/cpuinfo. Fix this by using nr_cpu_ids (the runtime limit)
instead of NR_CPUS to iterate CPUs.

[    3.052463] ------------[ cut here ]------------
[    3.059679] WARNING: CPU: 3 PID: 1 at include/linux/cpumask.h:108 show_cpuinfo+0x5e8/0x5f0
[    3.070072] Modules linked in: efivarfs autofs4
[    3.076257] CPU: 0 PID: 1 Comm: systemd Not tainted 5.19-rc5+ #1052
[    3.084034] Hardware name: Loongson Loongson-3A5000-7A1000-1w-V0.1-CRB/Loongson-LS3A5000-7A1000-1w-EVB-V1.21, BIOS Loongson-UDK2018-V2.0.04082-beta7 04/27
[    3.099465] Stack : 9000000100157b08 9000000000f18530 9000000000cf846c 9000000100154000
[    3.109127]         9000000100157a50 0000000000000000 9000000100157a58 9000000000ef7430
[    3.118774]         90000001001578e8 0000000000000040 0000000000000020 ffffffffffffffff
[    3.128412]         0000000000aaaaaa 1ab25f00eec96a37 900000010021de80 900000000101c890
[    3.138056]         0000000000000000 0000000000000000 0000000000000000 0000000000aaaaaa
[    3.147711]         ffff8000339dc220 0000000000000001 0000000006ab4000 0000000000000000
[    3.157364]         900000000101c998 0000000000000004 9000000000ef7430 0000000000000000
[    3.167012]         0000000000000009 000000000000006c 0000000000000000 0000000000000000
[    3.176641]         9000000000d3de08 9000000001639390 90000000002086d8 00007ffff0080286
[    3.186260]         00000000000000b0 0000000000000004 0000000000000000 0000000000071c1c
[    3.195868]         ...
[    3.199917] Call Trace:
[    3.203941] [<90000000002086d8>] show_stack+0x38/0x14c
[    3.210666] [<9000000000cf846c>] dump_stack_lvl+0x60/0x88
[    3.217625] [<900000000023d268>] __warn+0xd0/0x100
[    3.223958] [<9000000000cf3c90>] warn_slowpath_fmt+0x7c/0xcc
[    3.231150] [<9000000000210220>] show_cpuinfo+0x5e8/0x5f0
[    3.238080] [<90000000004f578c>] seq_read_iter+0x354/0x4b4
[    3.245098] [<90000000004c2e90>] new_sync_read+0x17c/0x1c4
[    3.252114] [<90000000004c5174>] vfs_read+0x138/0x1d0
[    3.258694] [<90000000004c55f8>] ksys_read+0x70/0x100
[    3.265265] [<9000000000cfde9c>] do_syscall+0x7c/0x94
[    3.271820] [<9000000000202fe4>] handle_syscall+0xc4/0x160
[    3.281824] ---[ end trace 8b484262b4b8c24c ]---

Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Merge tag 'for-6.0/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - A few fixes for the DM verity and bufio changes in this merge window

 - A smatch warning fix for DM writecache locking in writecache_map

* tag 'for-6.0/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm bufio: fix some cases where the code sleeps with spinlock held
  dm writecache: fix smatch warning about invalid return from writecache_map
  dm verity: fix verity_parse_opt_args parsing
  dm verity: fix DM_VERITY_OPTS_MAX value yet again
  dm bufio: simplify DM_BUFIO_CLIENT_NO_SLEEP locking

Pull drm fixes from Dave Airlie:
 "Not much to squeeze into rc1, just two small fixes, one for core gem
 and one for shmem-helpers:

  gem:
   - Annotate WW context in error paths

  shmem-helper:
   - Add missing vunmap in error paths"

* tag 'drm-next-2022-08-12-1' of git://anongit.freedesktop.org/drm/drm:
  drm/gem: Properly annotate WW context on drm_gem_lock_reservations() error
  drm/shmem-helper: Add missing vunmap on error

Fixed few typos and bit fields not aligned with the spec. Define other
related macros that will be useful in the future.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20220711174632.4186047-6-atishp@rivosinc.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>