Skip to content

L
linux
Switch branch/tag
  1. 26 May, 2009 7 commits
    • Steven Rostedt's avatar
      tracing: add __print_symbolic to trace events · 0f4fc29d
      Steven Rostedt authored 
      This patch adds __print_symbolic which is similar to __print_flags but
works for an enumeration type instead. That is, there is only a one to one
mapping between the values and the symbols. When a match is made, then
it is printed, otherwise the hex value is outputed.

[ Impact: add interface for showing symbol names in events ]
Signed-off-by: default avatarSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: default avatarFrederic Weisbecker <fweisbec@gmail.com>
      0f4fc29d
    • Steven Rostedt's avatar
      tracing: add flag output for kmem events · 62ba180e
      Steven Rostedt authored 
      This patch changes the output for gfp_flags from being a simple hex value
to the actual names.

  gfp_flags=GFP_ATOMIC  instead of gfp_flags=00000020

And even

  gfp_flags=GFP_KERNEL instead of gfp_flags=000000d0

(Thanks to Frederic Weisbecker for pointing out that the first version
 had a bad order of GFP masks)

[ Impact: more human readable output from tracer ]
Acked-by: default avatarEduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Signed-off-by: default avatarSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: default avatarFrederic Weisbecker <fweisbec@gmail.com>
      62ba180e
    • Steven Rostedt's avatar
      tracing: add previous task state info to sched switch event · 937cdb9d
      Steven Rostedt authored 
      It is useful to see the state of a task that is being switched out.
This patch adds the output of the state of the previous task in
the context switch event.

[ Impact: see state of switched out task in context switch ]
Signed-off-by: default avatarSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: default avatarFrederic Weisbecker <fweisbec@gmail.com>
      937cdb9d
    • Steven Rostedt's avatar
      tracing: add __print_flags for events · be74b73a
      Steven Rostedt authored 
      Developers have been asking for the ability in the ftrace event tracer
to display names of bits in a flags variable.

Instead of printing out c2, it would be easier to read FOO|BAR|GOO,
assuming that FOO is bit 1, BAR is bit 6 and GOO is bit 7.

Some examples where this would be useful are the state flags in a context
switch, kmalloc flags, and even permision flags in accessing files.

[
  v2 changes include:

  Frederic Weisbecker's idea of using a mask instead of bits,
  thus we can output GFP_KERNEL instead of GPF_WAIT|GFP_IO|GFP_FS.

  Li Zefan's idea of allowing the caller of __print_flags to add their
  own delimiter (or no delimiter) where we can get for file permissions
  rwx instead of r|w|x.
]

[
  v3 changes:

   Christoph Hellwig's idea of using an array instead of va_args.
]

[ Impact: better displaying of flags in trace output ]
Signed-off-by: default avatarSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: default avatarFrederic Weisbecker <fweisbec@gmail.com>
      be74b73a
    • Zhaolei's avatar
      ftrace: clean up of using ftrace_event_enable_disable() · 0e907c99
      Zhaolei authored 
      Always use ftrace_event_enable_disable() to enable/disable an event
so that we can factorize out the event toggling code.

[ Impact: factorize and cleanup event tracing code ]
Signed-off-by: default avatarZhao Lei <zhaolei@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <4A14FDFE.2080402@cn.fujitsu.com>
Signed-off-by: default avatarFrederic Weisbecker <fweisbec@gmail.com>
      0e907c99
    • Zhaolei's avatar
      ftrace: Add task_comm support for trace_event · b11c53e1
      Zhaolei authored 
      If we enable a trace event alone without any tracer running (such as
function tracer, sched switch tracer, etc...) it can't output enough
task command information.

We need to use the tracing_{start/stop}_cmdline_record() helpers
which are designed to keep track of cmdlines for any tasks that
were scheduled during the tracing.

Before this patch:
 # echo 1 > debugfs/tracing/events/sched/sched_switch/enable
 # cat debugfs/tracing/trace
 # tracer: nop
 #
 #           TASK-PID    CPU#    TIMESTAMP  FUNCTION
 #              | |       |          |         |
            <...>-2289  [000] 526276.724790: sched_switch: task bash:2289 [120] ==> sshd:2287 [120]
            <...>-2287  [000] 526276.725231: sched_switch: task sshd:2287 [120] ==> bash:2289 [120]
            <...>-2289  [000] 526276.725452: sched_switch: task bash:2289 [120] ==> sshd:2287 [120]
            <...>-2287  [000] 526276.727181: sched_switch: task sshd:2287 [120] ==> swapper:0 [140]
           <idle>-0     [000] 526277.032734: sched_switch: task swapper:0 [140] ==> events/0:5 [115]
            <...>-5     [000] 526277.032782: sched_switch: task events/0:5 [115] ==> swapper:0 [140]
 ...

After this patch:
 # tracer: nop
 #
 #           TASK-PID    CPU#    TIMESTAMP  FUNCTION
 #              | |       |          |         |
             bash-2269  [000] 527347.989229: sched_switch: task bash:2269 [120] ==> sshd:2267 [120]
             sshd-2267  [000] 527347.990960: sched_switch: task sshd:2267 [120] ==> bash:2269 [120]
             bash-2269  [000] 527347.991143: sched_switch: task bash:2269 [120] ==> sshd:2267 [120]
             sshd-2267  [000] 527347.992959: sched_switch: task sshd:2267 [120] ==> swapper:0 [140]
           <idle>-0     [000] 527348.531989: sched_switch: task swapper:0 [140] ==> events/0:5 [115]
         events/0-5     [000] 527348.532115: sched_switch: task events/0:5 [115] ==> swapper:0 [140]
 ...

Changelog:
v1->v2: Update Kconfig to select CONTEXT_SWITCH_TRACER in
        ENABLE_EVENT_TRACING
v2->v3: v2 can solve problem that was caused by config EVENT_TRACING
        alone, but when CONFIG_FTRACE is off and CONFIG_TRACING is
        selected by other config, compile fail happened again.
        This version solves it.

[ Impact: fix incomplete output of event tracing ]
Signed-off-by: default avatarZhao Lei <zhaolei@cn.fujitsu.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <4A14FDFE.2080402@cn.fujitsu.com>
Signed-off-by: default avatarFrederic Weisbecker <fweisbec@gmail.com>
      b11c53e1
    • Pekka Enberg's avatar
      kmemtrace: fix kernel parameter documentation · 29fcefba
      Pekka Enberg authored 
      The kmemtrace.enable kernel parameter no longer works. To enable
kmemtrace at boot-time, you must pass "ftrace=kmemtrace" instead.

[ Impact: remove obsolete kernel parameter documentation ]

Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Signed-off-by: default avatarPekka Enberg <penberg@cs.helsinki.fi>
LKML-Reference: <alpine.DEB.2.00.0905241112190.10296@rocky>
Signed-off-by: default avatarFrederic Weisbecker <fweisbec@gmail.com>
      29fcefba
  3. 25 May, 2009 2 commits
    • Li Zefan's avatar
      tracing/events: change the type of __str_loc_item to unsigned short · b0aae68c
      Li Zefan authored 
      When defining a dynamic size string, we add __str_loc_##item to the
trace entry, and it stores the location of the actual string in
entry->_str_data[]

'unsigned short' should be sufficient to store this information, thus
we save 2 bytes per dyn-size string in the ring buffer.

[ Impact: reduce memory occupied by dyn-size strings in ring buffer ]
Signed-off-by: default avatarLi Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <4A14EDB6.2050507@cn.fujitsu.com>
Signed-off-by: default avatarFrederic Weisbecker <fweisbec@gmail.com>
      b0aae68c
    • Lai Jiangshan's avatar
      tracing: add trace_event_read_lock() · 4f535968
      Lai Jiangshan authored 
      I found that there is nothing to protect event_hash in
ftrace_find_event(). Rcu protects the event hashlist
but not the event itself while we use it after its extraction
through ftrace_find_event().

This lack of a proper locking in this spot opens a race
window between any event dereferencing and module removal.

Eg:

--Task A--

print_trace_line(trace) {
  event = find_ftrace_event(trace)

--Task B--

trace_module_remove_events(mod) {
  list_trace_events_module(ev, mod) {
    unregister_ftrace_event(ev->event) {
      hlist_del(ev->event->node)
        list_del(....)
    }
  }
}
|--> module removed, the event has been dropped

--Task A--

  event->print(trace); // Dereferencing freed memory

If the event retrieved belongs to a module and this module
is concurrently removed, we may end up dereferencing a data
from a freed module.

RCU could solve this, but it would add latency to the kernel and
forbid tracers output callbacks to call any sleepable code.
So this fix converts 'trace_event_mutex' to a read/write semaphore,
and adds trace_event_read_lock() to protect ftrace_find_event().

[ Impact: fix possible freed memory dereference in ftrace ]
Signed-off-by: default avatarLai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: default avatarSteven Rostedt <rostedt@goodmis.org>
LKML-Reference: <4A114806.7090302@cn.fujitsu.com>
Signed-off-by: default avatarFrederic Weisbecker <fweisbec@gmail.com>
      4f535968
  5. 20 May, 2009 1 commit
  7. 19 May, 2009 2 commits
    • Stefan Raspl's avatar
      blktrace: remove debugfs entries on bad path · fd51d251
      Stefan Raspl authored 
      debugfs directory entries for devices are not removed on some
of the failure pathes in do_blk_trace_setup().
One way to reproduce is to start blktrace on multiple devices
with insufficient Vmalloc space: Devices will fail with
a message like this:

	BLKTRACESETUP(2) /dev/sdu failed: 5/Input/output error

If so, the respective entries in debugfs
(e.g. /sys/kernel/debug/block/sdu) will remain and subsequent
attempts to start blktrace on the respective devices will not
succeed due to existing directories.

[ Impact: fix /debug/tracing file cleanup corner case ]
Signed-off-by: default avatarStefan Raspl <stefan.raspl@linux.vnet.ibm.com>
Acked-by: default avatarLi Zefan <lizf@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: schwidefsky@de.ibm.com
Cc: heiko.carstens@de.ibm.com
LKML-Reference: <4A1266CC.5040801@linux.vnet.ibm.com>
Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
      fd51d251
    • Li Zefan's avatar
      tracing/events: Documentation updates · 143c145e
      Li Zefan authored 
      - fix some typos
- document the difference between '>' and '>>'
- document the 'enable' toggle
- remove section "Defining an event-enabled tracepoint", since it's
  out-dated and sample/trace_events/ already serves this purpose.

v2: add "Updated by Li Zefan"

[ Impact: make documentation up-to-date ]
Signed-off-by: default avatarLi Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
LKML-Reference: <4A125503.5060406@cn.fujitsu.com>
Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
      143c145e
  9. 18 May, 2009 2 commits
  11. 16 May, 2009 1 commit
  13. 15 May, 2009 25 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7