From Shawn Guo:
The imx/mxs device tree changes for 3.13:

- Use macros for mxs pinctrl settings
- New board support: VF610 Cosmic/Cosmic+, imx6q-udoo, MSR M28CU3
- Support DSPI device for vf610
- Add PCIe device for imx6qdl
- Add UHS pinctrl states for imx6sl and imx6qdl
- Display support for APF and imx51-babbage boards
- Enable SPI NOR and USB for imx6sl-evk board
- Enable LVDS for imx6q-sabrelite and SPDIF for imx6qdl-wandboard
- Misc updates on boards: TX28, imx6qdl-wandboard, imx53-qsb etc.
- Some random updates on imx51 device tree

* tag 'imx-dt-3.13' of git://git.linaro.org/people/shawnguo/linux-2.6: (44 commits)
  ARM: imx: imx6sl iomuxc syscon is compatible to imx6q
  ARM: dts: imx6sl-evk: enable the SPI NOR
  ARM: dts: imx6sl: add a pinctrl for ECSPI1
  ARM: imx27: add missing #pwm-cells property
  ARM: dts: imx6sl: add pinctrl uhs states for usdhc
  ARM: dts: imx6qdl-sabresd: Add backlight support for lvds
  ARM: dts: imx51-babbage: Make DVI and WVGA panel functional
  ARM: imx27-apf27dev: Add framebuffer support
  ARM: imx51-apf51dev: Add parallel display support
  ARM: dts: imx53-qsb: Do not use GPIO1_8 as wakeup source
  ARM: dts: imx53-qsb: SDHC1 does not have cd-gpios
  ARM: dts: imx53-qsb: SDHC3 is connected in 8-bit mode
  ARM: dts: mxs: Add MSR M28CU3 board
  ARM: dts: imx6qdl-wandboard: Provide phy-reset-gpios
  ARM: dts: imx6qdl-sabresd: Provide phy-reset-gpios
  ARM: dts: imx6q-sabrelite: Add ethernet phy reset pin into hog
  ARM: dts: imx6qdl: add pcie device node
  ARM: dts: imx6q-udoo: Add initial board support
  ARM: dts: mxs: Add muxing options for the SSP2 MMC
  ARM: dts: add initial VF610 Cosmic/Cosmic+ board support
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge most of tag 'tags/exynos-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git into next/dt

From Kukjin Kim, these are device-tree updates for Exynos. Among the changes:
- add MIPI PHY node for exynos4
- update regulator for origen and exynos5250-arndale
- add support HDMI for exynos5250, exynos5420

* commit '93457b9c':
  ARM: dts: Add HDMI related I2C nodes for Arndale board
  ARM: dts: enable hdmi subsystem for exynos5420 smdk board
  ARM: dts: add dt nodes for hdmi subsystem for exynos5420
  ARM: dts: add i2c device nodes for Exynos5420
  ARM: dts: add clocks to hdmi dt node for exynos5250
  ARM: dts: add mixer clocks to mixer node for Exynos5250
  of/documentation: update with clock information for exynos hdmi subsystem
  ARM: dts: Disable Exynos5250 I2S controllers by default
  ARM: dts: Add reg property to regulator nodes in exynos5250-arndale
  ARM: dts: Add fixed voltage regulator to simple bus for origen
  ARM: dts: Add MIPI PHY node to exynos4.dtsi

Merge tag 'ux500-dt-for-v3.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/dt

From Linus Walleij:
Five incremental device tree patches around the clock handling,
and adding SSP/SPI devices to the device tree.

* tag 'ux500-dt-for-v3.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
  ARM: ux500: register all SSP and SPI blocks
  ARM: ux500: fix I2C4 clock bit
  ARM: ux500: fix clock for GPIO blocks 6 and 7
  clk: ux500: fix erroneous bit assignment
  ARM: ux500: fix clock for GPIO block 8
Signed-off-by: Olof Johansson <olof@lixom.net>

From Maxime Ripard:
Allwinner sunXi SoCs minor fixes for 3.13

* tag 'sunxi-fixes-for-3.13' of https://github.com/mripard/linux:
  ARM: sun6i: Fix the APB2 clock gates register size
Signed-off-by: Olof Johansson <olof@lixom.net>

From Maxime Ripard:
Allwinner sunXi SoCs device tree changes for 3.13

This DT series sees the introduction of the cubietruck DT, plus the addition of
the i2c controller for the A20 based boards, and of the Security ID found in
all the Allwinner SoCs but the A31.

* tag 'sunxi-dt-for-3.13' of https://github.com/mripard/linux:
  ARM: sunxi: dts: Add support for the cubieboard3, the CubieTruck
  ARM: sun7i: olinuxino-micro: Enable the I2C controllers
  ARM: sun7i: cubieboard2: Enable the I2C controllers
  ARM: sun7i: Add the pin muxing options for the I2C controllers
  ARM: sun7i: Enable the I2C controllers
  ARM: sunxi: dt: Add sunxi-sid to dts for sun4i, sun5i and sun7i
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v3.13/pinctrl-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

From Tony Lindgren:

Looks like I managed to break the x86 build for some
configs. Here's a fix for that on top of the pinctrl
changes already merged with the signed tag
omap-for-v3.13/quirk-signed.

* tag 'omap-for-v3.13/pinctrl-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  pinctrl: single: Fix build when not built on ARM
Signed-off-by: Olof Johansson <olof@lixom.net>

Looks like we need a little bit of arch specific handling
with the generic IRQ. Fix the issue with an ifdef the
same way as other drivers do.

ARM needs things set to IRQF_VALID, which also then sets
noprobe. Others seem to use just irq_set_noprobe().

Otherwise we can get:

drivers/pinctrl/pinctrl-single.c: In function 'pcs_irqdomain_map':
drivers/pinctrl/pinctrl-single.c:1750:2: error: implicit declaration of function 'set_irq_flags' [-Werror=implicit-function-declaration]
drivers/pinctrl/pinctrl-single.c:1750:21: error: 'IRQF_VALID' undeclared (first use in this function)
drivers/pinctrl/pinctrl-single.c:1750:34: error: 'IRQF_PROBE' undeclared (first use in this function)
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Merge tag 'omap-for-v3.13/board-removal-signed-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

From Tony Lindgren:
Changes needed to drop legacy booting support for some
omap3 boards.

Note that that these are based on a merge of the
following for the dependencies:

- v3.12-rc5 for fixes to pinctrl mask
- omap-for-v3.13/dt-signed to avoid pointless merge conflicts
- omap-for-v3.13/quirk-signed for legacy pdata handling

* tag 'omap-for-v3.13/board-removal-signed-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (125 commits)
  ARM: OMAP2+: remove legacy support for IGEP boards
  ARM: OMAP2+: Remove legacy support for zoom platforms
  ARM: OMAP2+: Remove legacy booting support for omap3 EVM
  ARM: OMAP2: delete board-rm680
  ARM: dts: add minimal DT support for Nokia N950 & N9 phones
  ARM: dts: Add basic support for zoom3
  ARM: dts: Add basic support for TMDSEVM3730 (Mistral AM/DM37x EVM)
  ARM: dts: Add common support for omap3-evm
  ARM: dts: Shared file for omap GPMC connected smsc911x
  +Linux 3.12-rc5
Signed-off-by: Kevin Hilman <khilman@linaro.org>

Device Tree support for IGEP boards in mainline is almost
finished. The only remaining bits are support for the
Marvell SD8686 wifi + BT and TFP410 DVI chips.

Adding support for these should be straightforward so let's
not block OMAP3 moving to Device Tree only boot and remove
the board file for IGEP boards.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>

We now have pretty decent device tree based support for
zoom platforms. It's not complete, but basics work for
me so adding more features should be quite trivial.

Looks like also 3630 sdp is zoom based, and looking
at it's board file should also be trivial to support
with the device tree based booting.

Patches are welcome if people are still using these.
Signed-off-by: Tony Lindgren <tony@atomide.com>

We now have pretty decent support with the device tree
based booting. Patches to add more features are welcome.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Delete board file for Nokia RM-680/RM-696 (N950/N9). DT-based booting
should be used for further development on this HW.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add minimal DT support for Nokia N950 & N9 phones. The same functionality
that is provided by the current board file should work: serial console,
USB, OneNAND and MMC.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Tony Lindgren <tony@atomide.com>

I've tested serial, MMC, smsc911x and wl12xx on zoom3. As my
omap is an early ES revision, I have not been able to test
off-idle on this one. But anyways, I'd say we have enough
device tree support for the zoom to be able to drop the
board-zoom files. Patches are welcome to add further features
to this .dts file.
Signed-off-by: Tony Lindgren <tony@atomide.com>

The imx6sl iomuxc syscon is compatible to imx6q, so let's add
compatible string 'fsl,imx6q-iomuxc-gpr' for imx6sl iomuxc syscon node.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

From Nicolas Ferre:
First DT series for 3.13
- addition of sound for at91sam9n12
- a little fix for MMC vs. SPI on at91sam9g20ek

* tag 'at91-dt' of git://github.com/at91linux/linux-at91:
  ARM: at91: remove pinctrl conflict between mmc and SPI for at91sam9g20ek
  ARM: at91: add sound support on at91sam9n12ek board
  ARM: at91: enable ssc on at91sam9n12ek board
  ARM: at91: enable wm8904 on at91sam9n12ek board
  ARM: at91: add ssc dma parameter for at91sam9n12
  ARM: at91: add at91sam9n12 ssc clock in look up table
Signed-off-by: Kevin Hilman <khilman@linaro.org>

These MMC and SPI buses can't be configured at the same time because they
share the same traces on the EK board.
Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

This adds the SSP and SPI blocks to the device tree and makes
them active. Only this way can their clocks be properly gated
off at boot.
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

The PCLK for I2C4 is controlled by bit 10 in the PCKEN registers
while the KCLK is controlled by bit 9 on the KCKEN, it's
one of these odd assymetric things. Correct the PCLK bit to 10.
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

The clock assignment in the device tree for GPIO blocks 6
and 7 was incorrect, indicating this was managed by bit 1 on
PRCC 2 while it was in fact bit 11 on PRCC 2.
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Due to a typo or similar, the peripheral group 2 clock 11
gate was set to bit 1 instead of bit 11. We need to fix this
to be able to set the correct enable bit in the device tree:
when trying to correct the bit assignment in the device tree,
the system would hang.

Cc: Mike Turquette <mturquette@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

The clock assignment in the device tree for GPIO block 8 was
incorrect, indicating this was managed by bit 1 on PRCC 6
while it was in fact bit 1 on PRCC 5.
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

enable the spi nor for imx6sl-evk boards.
Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

add a pinctrl for ECSPI1. This pinctrl can be used in the imx6sl-evk board.
Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

The pwm-node is missing its #pwm-cells property. The pwm-framework will
complain about this.

Add the missing property.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

From Stephen Warren:
* tegra/dt:
  ARM: tegra: Use symbolic names for gr3d clocks
  ARM: tegra: Mark Tegra30 display controller compatible with Tegra20
  ARM: tegra: add GPIO controller to tegra124.dtsi
  ARM: tegra: enable LP1 suspend mode for Venice2
  ARM: tegra: enable Tegra RTC as default for Tegra124
  ARM: tegra: add Venice2 board support
  ARM: tegra: Add initial device tree for Tegra124
  ARM: tegra: add vcc supply for nct1008 to Cardhu
  ARM: tegra: add DT entry for nct1008 to Dalmore
  ARM: tegra: use dt-binding header for key code
  ARM: tegra: add palmas pincontrol to Dalmore device tree
Signed-off-by: Kevin Hilman <khilman@linaro.org>

From Jason Cooper:
mvebu dt changes for v3.13 (round 3)

 - dove
    - add audio devices
    - fix bad properties of si5351 clkout2 for CuBox

* tag 'dt-3.13-3' of git://git.infradead.org/linux-mvebu:
  ARM: Dove: fix bad properties of the si5351 clkout2 used by Cubox audio
  ARM: Dove: Add the audio device to the Cubox DT
  ARM: Dove: Add the audio devices in DT

Commit 05849c93 (ARM: tegra30: convert
device tree files to use CLK defines) updated the Tegra30 device tree to
use symbolic clock names but forgot to update this node.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>

The display controller found on Tegra30 SoCs is backwards-compatible
with the one on Tegra20 SoCs.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>

The Tegra124 GPIO controller is identical to Tegra30, so copy the
DT node from tegra30.dtsi to tegra124.dtsi.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>

Merge tag 'omap-for-v3.13/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

From Tony Lindgren:
omap device tree related changes via Benoit Cousson <bcousson@baylibre.com>:

Add the minimal DTS support for DRA7xx based SoC core.
Add the initial support for N900 and gta04 phones.
Enable USB3 on OMAP5 evm board.
Add support for cryto accelerators
Add new IGEP AQUILA board
Add AM33XX EDMA support
Update HSUSB node to use the reset-gpios fmwk

* tag 'omap-for-v3.13/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (58 commits)
  ARM: dts: dra7-evm: Add mmc2 node for eMMC support
  ARM: dts: dra7-evm: Add mmc1 node for micro-sd support
  ARM: dts: omap5-uevm: mark TWL6037 as system-power-controller
  ARM: dts: omap3-igep0020: use standard constant for IRQ flags
  ARM: dts: omap3-igep0020: Add HS USB Host support
  ARM: dts: omap3-igep: Add USB OTG support
  ARM: dts: AM33XX beagle black: add pinmux and hdmi node to enable display
  ARM: dts: AM33XX: Add LCDC info into am335x-evm
  ARM: dts: AM437X: Add DES node
  ARM: dts: AM437X: Add AES node
  ARM: dts: AM33XX: Fix AES interrupt number
  ARM: dts: AM33XX: Add AES data and documentation
  ARM: dts: AM33XX: Add SHAM data and documentation
  ARM: dts: OMAP4: Add DES3DES node
  ARM: dts: OMAP4: Add AES node
  ARM: dts: am335x-evm[sdk]: switch mmc1 to 4-bit mode
  ARM: dts: am335x-bone-common: correct mux mode for cmd line
  ARM: dts: AM33XX: Add support for IGEP AQUILA EXPANSION board.
  ARM: dts: AM33XX: Add support for IGEP COM AQUILA
  ARM: dts: am335x-boneblack: move fixed regulator to board level
  ...
Signed-off-by: Kevin Hilman <khilman@linaro.org>

Merge tag 'omap-for-v3.13/quirk-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

From Tony Lindgren:
Changes needed to prepare for making omap3 device tree only:

- Always build in board-generic, and add pdata quirks and auxdata
  support for it so we have all the pdata related quirks
  in the same place.

- Merge of the drivers/pinctrl changes that are needed for PM
  to continue working on omap3 and also needed for other omaps
  eventually. The three pinctrl related patches have been acked
  by Linus Walleij and are pulled into both the pinctrl tree
  and this branch.

- Few defconfig related changes for drivers needed.

* tag 'omap-for-v3.13/quirk-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (523 commits)
  ARM: configs: omap2plus_defconfig: enable dwc3 and dependencies
  ARM: OMAP2+: Add WLAN modules and of_serial to omap2plus_defconfig
  ARM: OMAP2+: Run make savedefconfig on omap2plus_defconfig to shrink it
  ARM: OMAP2+: Add minimal 8250 support for GPMC
  ARM: OMAP2+: Use pdata quirks for wl12xx for omap3 evm and zoom3
  ARM: OMAP: Move DT wake-up event handling over to use pinctrl-single-omap
  ARM: OMAP2+: Add support for auxdata
  pinctrl: single: Add support for auxdata
  pinctrl: single: Add support for wake-up interrupts
  pinctrl: single: Prepare for supporting SoC specific features
  ARM: OMAP2+: igep0020: use display init from dss-common
  ARM: OMAP2+: pdata-quirks: add legacy display init for IGEPv2 board
  +Linux 3.12-rc4
Signed-off-by: Kevin Hilman <khilman@linaro.org>

Merge tag 'socfpga-dts-updates-for-v3.13' of git://git.rocketboards.org/linux-socfpga-next into next/dt

From Dinh Nguyen:
Updates to dts file structure for Altera's SOCFPGA

* Does not include any new bindings or bindings change
* Add dts file for a SOCFPGA with an Arria V FPGA
* Add a clocks property for the TWD timer
* Add support for Terasic SocKit Board which has Cyclone5 FPGA
* From Steffen Trumtrar:
"This series includes some minor cleanups (indentation and clock labels) and
reorders the socfpga dts hierarchy from:
	socfpga.dtsi
	-> socfpga_$board.dts
	-> socfpga_$otherboard.dts
to
	socfpga.dtsi
	-> socfpga_cyclone5.dtsi
	--> socfpga_cyclone5_$board.dts
	--> socfpga_cyclone5_$otherboard.dts
"

* tag 'socfpga-dts-updates-for-v3.13' of git://git.rocketboards.org/linux-socfpga-next:
  dts: socfpga: Add support for Altera's SOCFPGA Arria V board
  ARM: socfpga: dts: fix s2f_* clock name
  ARM: socfpga: dts: cleanup indentation
  ARM: socfpga: dts: Add support for terasic SoCkit
  ARM: socfpga: dts: Move common nodes to cyclone5 dtsi
  arm: socfpga: Add clock for smp_twd timer
Signed-off-by: Kevin Hilman <khilman@linaro.org>

From Simon Horman:
* renesas/dt2: (21 commits)
  ARM: shmobile: bockw: fixup ether node naming
  ARM: shmobile: r8a7779: add irqpin default status on DTSI
  ARM: shmobile: marzen: fixup SMSC IRQ number on DTS
  ARM: shmobile: bockw: add SMSC support on DTS
  ARM: shmobile: r8a7778: add renesas_intc_irqpin support on DTSI
  ARM: shmobile: r8a7791 SMP device tree node
  ARM: shmobile: r8a7791 Arch timer device tree node
  ARM: shmobile: r8a7791 IRQC device tree node
  ARM: shmobile: armadillo800eva-reference: add SDHI and MMCIF interfaces
  ARM: shmobile: armadillo-reference: Add PWM backlight node to DT
  ARM: shmobile: r8a73a4: add a DT node for the DMAC
  ARM: shmobile: r8a7790: add I2C DT nodes
  ARM: shmobile: only enable used I2C interfaces in DT on all Renesas boards
  ARM: shmobile: r8a7778: add usb phy power control function
  ARM: shmobile: r8a7778: add USBHS clock
  ARM: shmobile: r8a7791 CMT support
  ARM: shmobile: r8a7791 SCIF support
  ARM: shmobile: Initial r8a7791 SoC support
  ARM: shmobile: r8a7778: add SSI/SRU clock support
  ARM: shmobile: r8a7790: Add DU and LVDS clocks
  ...
Signed-off-by: Kevin Hilman <khilman@linaro.org>

I've tested the serial, MMC, smsc911x, wl12xx, and off-idle support
with the pinctrl patches, so it probably works better than the
board-*.c files ever did. Also the board-omap3evm.c file is broken
for the DSS, and has been for a while. Patches are welcome to fix
it in this .dts file, let's just drop the board-*.c file for this.

Note that off-idle currently requires doing request_irq() on the
wake-up pin from pinctrl-single IRQ domain until we can handle
that in some Linux generic way.

[tony@atomide.com: updated for make dtbs build fix]
Signed-off-by: Tony Lindgren <tony@atomide.com>

Looks like the main difference between the TMDSEVM3530 and
TMDSEVM3730 is just the omap processor:

http://www.ti.com/tool/tmdsevm3530
http://www.ti.com/tool/tmdsevm3730

So let's add a common file for the EVMs, and fix the description
for the omap3-evm.dst as that's clearly for the TMDSEVM3530
since it includes omap34xx.dtsi. It cannot support the TMDSEVM3730
properly, and we need a separate file for that in the following
patch.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Looks like at least Igep, Zoom and EVM boards can use a
common file for the GPMC connected smsc911x.
Signed-off-by: Tony Lindgren <tony@atomide.com>

We need the fixes in v3.12-rc5, dts changes in omap-for-v3.13/dt, and
the platform data quirk changes in omap-for-v3.13/quirk to start
removing omap3 board files without breaking things.

Add sound support on at91sam9n12ek board with wm8904 as codec.
Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Enable ssc on at91sam9n12ek board
Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>