- 10 Dec, 2020 40 commits
-
-
David S. Miller authored
Paolo Abeni says: ==================== mptcp: a bunch of fixes This series includes a few fixes following-up the recent code refactor for the MPTCP RX and TX paths. Boundling them together, since the fixes are somewhat related. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
When the workqueue disposes of the msk, the subflows can still receive some data from the peer after __mptcp_close_ssk() completes. The above could trigger a race between the msk receive path and the msk destruction. Acquiring the mptcp_data_lock() in __mptcp_destroy_sock() will not save the day: the rx path could be reached even after msk destruction completes. Instead use the subflow 'disposable' flag to prevent entering the msk receive path after __mptcp_close_ssk(). Fixes: e16163b6 ("mptcp: refactor shutdown and close") Reviewed-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Paolo Abeni authored
When a MPTCP listener socket is closed with unaccepted children pending, the ULP release callback will be invoked, but nobody will call into __mptcp_close_ssk() on the corresponding subflow. As a consequence, at ULP release time, the 'disposable' flag will be cleared and the subflow context memory will be leaked. This change addresses the issue always freeing the context if the subflow is still in the accept queue at ULP release time. Additionally, this fixes an incorrect code reference in the related comment. Note: this fix leverages the changes introduced by the previous commit. Fixes: e16163b6 ("mptcp: refactor shutdown and close") Reviewed-by:
-
Paolo Abeni authored
Christoph reported the following splat: WARNING: CPU: 0 PID: 4615 at net/ipv4/inet_connection_sock.c:1031 inet_csk_listen_stop+0x8e8/0xad0 net/ipv4/inet_connection_sock.c:1031 Modules linked in: CPU: 0 PID: 4615 Comm: syz-executor.4 Not tainted 5.9.0 #37 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:inet_csk_listen_stop+0x8e8/0xad0 net/ipv4/inet_connection_sock.c:1031 Code: 03 00 00 00 e8 79 b2 3d ff e9 ad f9 ff ff e8 1f 76 ba fe be 02 00 00 00 4c 89 f7 e8 62 b2 3d ff e9 14 f9 ff ff e8 08 76 ba fe <0f> 0b e9 97 f8 ff ff e8 fc 75 ba fe be 03 00 00 00 4c 89 f7 e8 3f RSP: 0018:ffffc900037f7948 EFLAGS: 00010293 RAX: ffff88810a349c80 RBX: ffff888114ee1b00 RCX: ffffffff827b14cd RDX: 0000000000000000 RSI: ffffffff827b1c38 RDI: 0000000000000005 RBP: ffff88810a2a8000 R08: ffff88810a349c80 R09: fffff520006fef1f R10: 0000000000000003 R11: fffff520006fef1e R12: ffff888114ee2d00 R13: dffffc0000000000 R14: 0000000000000001 R15: ffff888114ee1d68 FS: 00007f2ac1945700(0000) GS:ffff88811b400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffd44798bc0 CR3: 0000000109810002 CR4: 0000000000170ef0 Call Trace: __tcp_close+0xd86/0x1110 net/ipv4/tcp.c:2433 __mptcp_close_ssk+0x256/0x430 net/mptcp/protocol.c:1761 __mptcp_destroy_sock+0x49b/0x770 net/mptcp/protocol.c:2127 mptcp_close+0x62d/0x910 net/mptcp/protocol.c:2184 inet_release+0xe9/0x1f0 net/ipv4/af_inet.c:434 __sock_release+0xd2/0x280 net/socket.c:596 sock_close+0x15/0x20 net/socket.c:1277 __fput+0x276/0x960 fs/file_table.c:281 task_work_run+0x109/0x1d0 kernel/task_work.c:151 get_signal+0xe8f/0x1d40 kernel/signal.c:2561 arch_do_signal+0x88/0x1b60 arch/x86/kernel/signal.c:811 exit_to_user_mode_loop kernel/entry/common.c:161 [inline] exit_to_user_mode_prepare+0x9b/0xf0 kernel/entry/common.c:191 syscall_exit_to_user_mode+0x22/0x150 kernel/entry/common.c:266 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f2ac1254469 Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ff 49 2b 00 f7 d8 64 89 01 48 RSP: 002b:00007f2ac1944dc8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffbf RBX: 000000000069bf00 RCX: 00007f2ac1254469 RDX: 0000000000000000 RSI: 0000000000008982 RDI: 0000000000000003 RBP: 000000000069bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000069bf0c R13: 00007ffeb53f178f R14: 00000000004668b0 R15: 0000000000000003 After commit 0397c6d8 ("mptcp: keep unaccepted MPC subflow into join list"), the msk's workqueue and/or PM can touch the MPC subflow - and acquire its socket lock - even if it's still unaccepted. If the above event races with the relevant listener socket close, we can end-up with the above splat. This change addresses the issue delaying the MPC socket insertion in conn_list at accept time - that is, partially reverting the blamed commit. We must additionally ensure that mptcp_pm_fully_established() happens after accept() time, or the PM will not be able to handle properly such event - conn_list could be empty otherwise. In the receive path, we check the subflow list node to ensure it is out of the listener queue. Be sure client subflows do not match transiently such condition moving them into the join list earlier at creation time. Since we now have multiple mptcp_pm_fully_established() call sites from different code-paths, said helper can now race with itself. Use an additional PM status bit to avoid multiple notifications. Reported-by:
Christoph Paasch <cpaasch@apple.com> Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/103 Fixes: 0397c6d8 ("mptcp: keep unaccepted MPC subflow into join list"), Reviewed-by:
-
Xie He authored
1. In x25_xmit, skb_reset_network_header is not necessary before we call lapb_data_request. The lapb module doesn't need skb->network_header. So there is no need to set skb->network_header before calling lapb_data_request. 2. In x25_data_indication (called by the lapb module after data have been received), skb_reset_network_header is not necessary before we call netif_rx. After we call netif_rx, the code in net/core/dev.c will call skb_reset_network_header before handing the skb to upper layers (in __netif_receive_skb_core, called by __netif_receive_skb_one_core, called by __netif_receive_skb, called by process_backlog). So we don't need to call skb_reset_network_header by ourselves. Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by:
Xie He <xie.he.0141@gmail.com> Signed-off-by:
-
Zheng Yongjun authored
Simplify the return expression. Signed-off-by:
Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by:
-
Dwip N. Banerjee authored
We observed that in the error case for batched send_subcrq_indirect() the driver does not account for the partial success case. This caused Linux to crash when free_map and pool index are inconsistent. Driver needs to update the rx pools "available" count when some batched sends worked but an error was encountered as part of the whole operation. Also track replenish_add_buff_failure for statistic purposes. Fixes: 4f0b6812 ("ibmvnic: Introduce batched RX buffer descriptor transmission") Signed-off-by:
Dwip N. Banerjee <dnbanerg@us.ibm.com> Reviewed-by:
Dany Madden <drt@linux.ibm.com> Signed-off-by:
-
David S. Miller authored
Mat Martineau says: ==================== mptcp: Add port parameter to ADD_ADDR option The ADD_ADDR MPTCP option is used to announce available IP addresses that a peer may connect to when adding more TCP subflows to an existing MPTCP connection. There is an optional port number field in that ADD_ADDR header, and this patch set adds capability for that port number to be sent and received. Patches 1, 2, and 4 refactor existing ADD_ADDR code to simplify implementation of port number support. Patches 3 and 5 are the main functional changes, for sending and receiving the port number in the MPTCP ADD_ADDR option. Patch 6 sends the ADD_ADDR option with port number on a bare TCP ACK, since the extra length of the option may run in to cases where sufficient TCP option space is not available on a data packet. Patch 7 plumbs in port number support for the in-kernel MPTCP path manager. Patches 8-11 add some optional debug output and a little more cleanup refactoring. ==================== Signed-off-by: -
Geliang Tang authored
Since the local variable sk has been defined, use it instead of open-coding. Reviewed-by:
Geliang Tang <geliangtang@gmail.com> Signed-off-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
-
Geliang Tang authored
Since the RM_ADDR signal had been reused with add_addr_signal, it's not suitable to call it add_addr_signal or mptcp_add_addr_status. So this patch renamed add_addr_signal to addr_signal, and renamed mptcp_add_addr_status to mptcp_addr_signal_status. Signed-off-by:
-
Geliang Tang authored
This patch reused add_addr_signal for the RM_ADDR announcing signal, by defining a new ADD_ADDR status named MPTCP_RM_ADDR_SIGNAL. Then the flag rm_addr_signal in PM could be dropped. Signed-off-by:
-
Geliang Tang authored
This patch printed out more debugging information for the ADD_ADDR suboption parsing on the incoming path. Signed-off-by:
-
Geliang Tang authored
This patch added a new parameter 'port' for mptcp_pm_announce_addr. If this parameter is true, we set the MPTCP_ADD_ADDR_PORT bit of the add_addr_signal. That means the announced address is added with a port number. Signed-off-by:
-
Geliang Tang authored
The process is similar to that of the ADD_ADDR IPv6, this patch also sent out a pure ack for the ADD_ADDR using port. Signed-off-by:
-
Geliang Tang authored
This patch added a new add_addr_signal type named MPTCP_ADD_ADDR_PORT, to identify it is an address with port to be added. It also added a new parameter 'port' for both mptcp_add_addr_len and mptcp_pm_add_addr_signal. In mptcp_established_options_add_addr, we check whether the announced address is added with port. If it is, we put this port number to mptcp_out_options's port field. Signed-off-by:
-
Geliang Tang authored
This patch uses adding up size to get the ADD_ADDR suboption length rather than returning the ADD_ADDR size constants. Signed-off-by:
-
Geliang Tang authored
In rfc8684, the length of ADD_ADDR suboption with IPv4 address and port is 18 octets, but mptcp_write_options is 32-bit aligned, so we need to pad it to 20 octets. All the other port related option lengths need to be added up 2 octets similarly. This patch added a new field 'port' in mptcp_out_options. When this field is set with a port number, we need to add up 4 octets for the ADD_ADDR suboption, and put the port number into the suboption. Signed-off-by:
-
Geliang Tang authored
The length of ADD_ADDR6 is 12 octets longer than ADD_ADDR. That's the only difference between them. This patch dropped the duplicate code between ADD_ADDR and ADD_ADDR6 suboptions writing, and unify them into one. Signed-off-by:
-
Geliang Tang authored
There are two differences between ADD_ADDR suboption and ADD_ADDR echo suboption: The length of the former is 8 octets longer than the length of the latter. The former's echo-flag is 0, and latter's echo-flag is 1. This patch added two local variables, len and echo, to unify ADD_ADDR and ADD_ADDR echo suboptions writing. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueDavid S. Miller authored
Tony Nguyen says: ==================== 100GbE Intel Wired LAN Driver Updates 2020-12-09 This series contains updates to ice driver only. Bruce changes the allocation of ice_flow_prof_params from stack to heap to avoid excessive stack usage. Corrects a misleading comment and silences a sparse warning that is not a problem. Paul allows for HW initialization to continue if PHY abilities cannot be obtained. Jeb removes bypassing FW link override and reading Option ROM and netlist information for non-E810 devices as this is now available on other devices. Nick removes vlan_ena field as this information can be gathered by checking num_vlan. Jake combines format strings and debug prints to the same line. Simon adds a space to fix string concatenation. v4: Drop ACL patches. Change PHY abilities failure message from debug to warning. v3: Fix email address for DaveM and fix character in cover letter v2: Expand on commit message for patch 3 to show example usage/commands. Reduce number of defensive checks being done. ==================== Signed-off-by: -
Zheng Yongjun authored
Simplify the return expression. Signed-off-by:
-
Zheng Yongjun authored
Simplify the return expression. Signed-off-by:
Vladimir Oltean <olteanv@gmail.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Zheng Yongjun authored
Simplify the return expression. Signed-off-by:
-
Zheng Yongjun authored
Simplify the return expression. Signed-off-by:
-
Zheng Yongjun authored
Simplify the return expression. Signed-off-by:
Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by:
-
Zheng Yongjun authored
Simplify the return expression. Signed-off-by:
-
Zheng Yongjun authored
Simplify the return expression. Signed-off-by:
-
Zheng Yongjun authored
Simplify the return expression. Signed-off-by:
-
Zheng Yongjun authored
Simplify the return expression. Signed-off-by:
-
David S. Miller authored
Bongsu Jeon says: ==================== nfc: s3fwrn5: Change I2C interrupt trigger to EDGE_RISING For stable Samsung's I2C interrupt handling, I changed the interrupt trigger from IRQ_TYPE_LEVEL_HIGH to IRQ_TYPE_EDGE_RISING and removed the hard coded interrupt trigger type in the i2c module for the flexible control. 1/2 is the changed dt binding for the edge rising trigger. 2/2 is to remove the hard coded interrupt trigger type in the i2c module. ChangeLog: v2: 2/2 - remove the hard coded interrupt trigger type. Bongsu Jeon (2): dt-bindings: net: nfc: s3fwrn5: Change I2C interrupt trigger to EDGE_RISING nfc: s3fwrn5: Remove hard coded interrupt trigger type from the i2c module ==================== Signed-off-by: -
Bongsu Jeon authored
For the flexible control of interrupt trigger type, remove the hard coded interrupt trigger type in the i2c module. The trigger type will be loaded from a dts. Signed-off-by:
Bongsu Jeon <bongsu.jeon@samsung.com> Signed-off-by:
-
Bongsu Jeon authored
Change interrupt trigger from IRQ_TYPE_LEVEL_HIGH to IRQ_TYPE_EDGE_RISING for stable NFC I2C interrupt handling. Samsung's NFC Firmware sends an i2c frame as below. 1. NFC Firmware sets the GPIO(interrupt pin) high when there is an i2c frame to send. 2. If the CPU's I2C master has received the i2c frame, NFC F/W sets the GPIO low. NFC driver's i2c interrupt handler would be called in the abnormal case as the NFC FW task of number 2 is delayed because of other high priority tasks. In that case, NFC driver will try to receive the i2c frame but there isn't any i2c frame to send in NFC. It would cause an I2C communication problem. This case would hardly happen. But, I changed the interrupt as a defense code. If Driver uses the TRIGGER_RISING instead of the LEVEL trigger, there would be no problem even if the NFC FW task is delayed. Signed-off-by:
-
Zheng Yongjun authored
Replace a comma between expression statements by a semicolon. Signed-off-by:
-
Zheng Yongjun authored
Replace a comma between expression statements by a semicolon. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Zheng Yongjun authored
Replace a comma between expression statements by a semicolon. Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
-
Zheng Yongjun authored
Replace a comma between expression statements by a semicolon. Signed-off-by:
-
Zheng Yongjun authored
Replace a comma between expression statements by a semicolon. Signed-off-by:
-
Zheng Yongjun authored
Replace a comma between expression statements by a semicolon. Signed-off-by:
-
Zheng Yongjun authored
Replace a comma between expression statements by a semicolon. Signed-off-by:
-
Zheng Yongjun authored
Replace a comma between expression statements by a semicolon. Signed-off-by:
-
