After commit 4c1e1b34 ("nfsd: Store ex_anon_uid and ex_anon_gid as
kuids and kgids") using kuid/kgid for ex_anon_uid/ex_anon_gid,
user_namespace.h is not needed.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

If fsloc_parse() failed at kzalloc(), fs/nfsd/export.c
 411
 412         fsloc->locations = kzalloc(fsloc->locations_count
 413                         * sizeof(struct nfsd4_fs_location), GFP_KERNEL);
 414         if (!fsloc->locations)
 415                 return -ENOMEM;

svc_export_parse() will call nfsd4_fslocs_free() with fsloc->locations = NULL,
so that, "kfree(fsloc->locations[i].path);" will cause a crash.

If fsloc_parse() failed after that, fsloc_parse() will call nfsd4_fslocs_free(),
and svc_export_parse() will call it again, so that, a double free is caused.

This patch checks the fsloc->locations, and set to NULL after it be freed.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

RPC_MAX_AUTH_SIZE is scattered around several places.  Better to set it
once in the auth code, where this kind of estimate should be made.  And
while we're at it we can leave it zero when we're not using krb5i or
krb5p.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

And switch a couple other functions from the encode(&p,...) convention
to the p = encode(p,...) convention mostly used elsewhere.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Signed-off-by: J. Bruce Fields <bfields@redhat.com>

These macros just obscure what's going on.  Adopt the convention of the
client-side code.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

encode_getattr, for example, can return nfserr_resource to indicate it
ran out of buffer space.  That's not a legal error in the 4.1 case.
And in the 4.1 case, if we ran out of buffer space, we should have
exceeded a session limit too.

(Note in 1bc49d83 "nfsd4: fix
nfs4err_resource in 4.1 case" we originally tried fixing this error
return before fixing the problem that we could error out while we still
had lots of available space.  The result was to trade one illegal error
for another in those cases.  We decided that was helpful, so reverted
the change in fc208d02, and are only
reinstating it now that we've elimited almost all of those cases.)
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

I'm not sure why a client would want to stuff multiple reads in a
single compound rpc, but it's legal for them to do it, and we should
really support it.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

More cleanup, no change in functionality.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Trivial cleanup, no change in functionality.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

The splice and readv cases are actually quite different--for example the
former case ignores the array of vectors we build up for the latter.

It is probably clearer to separate the two cases entirely.

There's some code duplication between the split out encoders, but this
is only temporary and will be fixed by a later patch.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Signed-off-by: J. Bruce Fields <bfields@redhat.com>

We currently allow only one read per compound, with operations before
and after whose responses will require no more than about a page to
encode.

While we don't expect clients to violate those limits any time soon,
this limitation isn't really condoned by the spec, so to future proof
the server we should lift the limitation.

At the same time we'd like to continue to support zero-copy reads.

Supporting multiple zero-copy-reads per compound would require a new
data structure to replace struct xdr_buf, which can represent only one
set of included pages.

So for now we plan to modify encode_read() to support either zero-copy
or non-zero-copy reads, and use some heuristics at the start of the
compound processing to decide whether a zero-copy read will work.

This will allow us to support more exotic compounds without introducing
a performance regression in the normal case.

Later patches handle those "exotic compounds", this one just makes sure
zero-copy is turned off in those cases.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Otherwise a following patch would turn off all 4.1 zero-copy reads.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

We plan to use this estimate to decide whether or not to allow zero-copy
reads.  Currently we're assuming all getattr's are a page, which can be
both too small (ACLs e.g. may be arbitrarily long) and too large (after
an upcoming read patch this will unnecessarily prevent zero copy reads
in any read compound also containing a getattr).
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

There's no advantage to this zero-copy-style readlink encoding, and it
unnecessarily limits the kinds of compounds we can handle.  (In practice
I can't see why a client would want e.g. multiple readlink calls in a
comound, but it's probably a spec violation for us not to handle it.)
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

As long as we're here, let's enforce the protocol's limit on the number
of directory entries to return in a readdir.

I don't think anyone's ever noticed our lack of enforcement, but maybe
there's more of a chance they will now that we allow larger readdirs.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Currently we limit readdir results to a single page.  This can result in
a performance regression compared to NFSv3 when reading large
directories.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Once we know the limits the session places on the size of the rpc, we
can also use that information to release any unnecessary reserved reply
buffer space.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

We can simplify session limit enforcement by restricting the xdr buflen
to the session size.

Also fix a preexisting bug: we should really have been taking into
account the auth-required space when comparing against session limits,
which are limits on the size of the entire rpc reply, including any krb5
overhead.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

With this xdr_reserve_space can help us enforce various limits.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

We don't necessarily want to assume that the buflen is the same
as the number of bytes available in the pages.  We may have some reason
to set it to something less (for example, later patches will use a
smaller buflen to enforce session limits).

So, calculate the buflen relative to the previous buflen instead of
recalculating it from scratch.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Signed-off-by: J. Bruce Fields <bfields@redhat.com>

It will turn out to be useful to have a more accurate estimate of reply
size; so, piggyback on the existing op reply-size estimators.

Also move nfsd4_max_reply to nfs4proc.c to get easier access to struct
nfsd4_operation and friends.  (Thanks to Christoph Hellwig for pointing
out that simplification.)
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

I ran into this corner case in testing: in theory clients can provide
state owners up to 1024 bytes long.  In the sessions case there might be
a risk of this pushing us over the DRC slot size.

The conflicting owner isn't really that important, so let's humor a
client that provides a small maxresponsize_cached by allowing ourselves
to return without the conflicting owner instead of outright failing the
operation.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Limits on maxresp_sz mean that we only ever need to replay rpc's that
are contained entirely in the head.

The one exception is very small zero-copy reads.  That's an odd corner
case as clients wouldn't normally ask those to be cached.

in any case, this seems a little more robust.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

After this we can handle for example getattr of very large ACLs.

Read, readdir, readlink are still special cases with their own limits.

Also we can't handle a new operation starting close to the end of a
page.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Better variable name, some comments, etc.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Now that all op encoders can handle running out of space, we no longer
need to check the remaining size for every operation; only nonidempotent
operations need that check, and that can be done by
nfsd4_check_resp_size.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

We're keeping the length updated as we go now, so there's no need for
the extra calculation here.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Once we've included page-cache pages in the encoding it's difficult to
remove them and restart encoding.  (xdr_truncate_encode doesn't handle
that case.)  So, make sure we'll have adequate space to finish the
operation first.

For now COMPOUND_SLACK_SPACE checks should prevent this case happening,
but we want to remove those checks.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

We've tried to prevent running out of space with COMPOUND_SLACK_SPACE
and special checking in those operations (getattr) whose result can vary
enormously.

However:
	- COMPOUND_SLACK_SPACE may be difficult to maintain as we add
	  more protocol.
	- BUG_ON or page faulting on failure seems overly fragile.
	- Especially in the 4.1 case, we prefer not to fail compounds
	  just because the returned result came *close* to session
	  limits.  (Though perfect enforcement here may be difficult.)
	- I'd prefer encoding to be uniform for all encoders instead of
	  having special exceptions for encoders containing, for
	  example, attributes.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Normally xdr encoding proceeds in a single pass from start of a buffer
to end, but sometimes we have to write a few bytes to an earlier
position.

Use write_bytes_to_xdr_buf for these cases rather than saving a pointer
to write to.  We plan to rewrite xdr_reserve_space to handle encoding
across page boundaries using a scratch buffer, and don't want to risk
writing to a pointer that was contained in a scratch buffer.

Also it will no longer be safe to calculate lengths by subtracting two
pointers, so use xdr_buf offsets instead.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Now that lengths are reliable, we can use xdr_truncate instead of
open-coding it everywhere.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

This will be used in the server side in a few cases:
	- when certain operations (read, readdir, readlink) fail after
	  encoding a partial response.
	- when we run out of space after encoding a partial response.
	- in readlink, where we initially reserve PAGE_SIZE bytes for
	  data, then truncate to the actual size.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Signed-off-by: J. Bruce Fields <bfields@redhat.com>