- 22 Sep, 2013 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfsLinus Torvalds authored
Pull btrfs fixes from Chris Mason: "These are mostly bug fixes and a two small performance fixes. The most important of the bunch are Josef's fix for a snapshotting regression and Mark's update to fix compile problems on arm" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (25 commits) Btrfs: create the uuid tree on remount rw btrfs: change extent-same to copy entire argument struct Btrfs: dir_inode_operations should use btrfs_update_time also btrfs: Add btrfs: prefix to kernel log output btrfs: refuse to remount read-write after abort Btrfs: btrfs_ioctl_default_subvol: Revert back to toplevel subvolume when arg is 0 Btrfs: don't leak transaction in btrfs_sync_file() Btrfs: add the missing mutex unlock in write_all_supers() Btrfs: iput inode on allocation failure Btrfs: remove space_info->reservation_progress Btrfs: kill delay_iput arg to the wait_ordered functions Btrfs: fix worst case calculator for space usage Revert "Btrfs: rework the overcommit logic to be based on the total size" Btrfs: improve replacing nocow extents Btrfs: drop dir i_size when adding new names on replay Btrfs: replay dir_index items before other items Btrfs: check roots last log commit when checking if an inode has been logged Btrfs: actually log directory we are fsync()'ing Btrfs: actually limit the size of delalloc range Btrfs: allocate the free space by the existed max extent size when ENOSPC ...
-
- 21 Sep, 2013 27 commits
-
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client bugfix from Trond Myklebust: "Fix a regression due to incorrect sharing of gss auth caches" * tag 'nfs-for-3.12-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: RPCSEC_GSS: fix crash on destroying gss auth
-
Josef Bacik authored
Users have been complaining of the uuid tree stuff warning that there is no uuid root when trying to do snapshot operations. This is because if you mount -o ro we will not create the uuid tree. But then if you mount -o rw,remount we will still not create it and then any subsequent snapshot/subvol operations you try to do will fail gloriously. Fix this by creating the uuid_root on remount rw if it was not already there. Thanks, Signed-off-by:
Josef Bacik <jbacik@fusionio.com> Signed-off-by:
Chris Mason <chris.mason@fusionio.com>
-
Mark Fasheh authored
btrfs_ioctl_file_extent_same() uses __put_user_unaligned() to copy some data back to it's argument struct. Unfortunately, not all architectures provide __put_user_unaligned(), so compiles break on them if btrfs is selected. Instead, just copy the whole struct in / out at the start and end of operations, respectively. Signed-off-by:
Mark Fasheh <mfasheh@suse.de> Signed-off-by:
-
Guangyu Sun authored
Commit 2bc55652 (Btrfs: don't update atime on RO subvolumes) ensures that the access time of an inode is not updated when the inode lives in a read-only subvolume. However, if a directory on a read-only subvolume is accessed, the atime is updated. This results in a write operation to a read-only subvolume. I believe that access times should never be updated on read-only subvolumes. To reproduce: # mkfs.btrfs -f /dev/dm-3 (...) # mount /dev/dm-3 /mnt # btrfs subvol create /mnt/sub Create subvolume '/mnt/sub' # mkdir /mnt/sub/dir # echo "abc" > /mnt/sub/dir/file # btrfs subvol snapshot -r /mnt/sub /mnt/rosnap Create a readonly snapshot of '/mnt/sub' in '/mnt/rosnap' # stat /mnt/rosnap/dir File: `/mnt/rosnap/dir' Size: 8 Blocks: 0 IO Block: 4096 directory Device: 16h/22d Inode: 257 Links: 1 Access: (0755/drwxr-xr-x) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2013-09-11 07:21:49.389157126 -0400 Modify: 2013-09-11 07:22:02.330156079 -0400 Change: 2013-09-11 07:22:02.330156079 -0400 # ls /mnt/rosnap/dir file # stat /mnt/rosnap/dir File: `/mnt/rosnap/dir' Size: 8 Blocks: 0 IO Block: 4096 directory Device: 16h/22d Inode: 257 Links: 1 Access: (0755/drwxr-xr-x) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2013-09-11 07:22:56.797151670 -0400 Modify: 2013-09-11 07:22:02.330156079 -0400 Change: 2013-09-11 07:22:02.330156079 -0400 Reported-by:
Koen De Wit <koen.de.wit@oracle.com> Signed-off-by:
Guangyu Sun <guangyu.sun@oracle.com> Signed-off-by:
-
Frank Holton authored
The kernel log entries for device label %s and device fsid %pU are missing the btrfs: prefix. Add those here. Signed-off-by:
Frank Holton <fholton@gmail.com> Reviewed-by:
David Sterba <dsterba@suse.cz> Signed-off-by:
-
David Sterba authored
It's still possible to flip the filesystem into RW mode after it's remounted RO due to an abort. There are lots of places that check for the superblock error bit and will not write data, but we should not let the filesystem appear read-write. Signed-off-by:
-
chandan authored
This patch makes it possible to set BTRFS_FS_TREE_OBJECTID as the default subvolume by passing a subvolume id of 0. Signed-off-by:
chandan <chandan@linux.vnet.ibm.com> Reviewed-by:
-
Filipe David Borba Manana authored
In btrfs_sync_file(), if the call to btrfs_log_dentry_safe() returns a negative error (for e.g. -ENOMEM via btrfs_log_inode()), we would return without ending/freeing the transaction. Signed-off-by:
-
Stefan Behrens authored
The BUG() was replaced by btrfs_error() and return -EIO with the patch "get rid of one BUG() in write_all_supers()", but the missing mutex_unlock() was overlooked. The 0-DAY kernel build service from Intel reported the missing unlock which was found by the coccinelle tool: fs/btrfs/disk-io.c:3422:2-8: preceding lock on line 3374 Signed-off-by:Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by:
-
Josef Bacik authored
We don't do the iput when we fail to allocate our delayed delalloc work in __start_delalloc_inodes, fix this. Signed-off-by:
-
Josef Bacik authored
This isn't used for anything anymore, just remove it. Signed-off-by:
-
Josef Bacik authored
This is a left over of how we used to wait for ordered extents, which was to grab the inode and then run filemap flush on it. However if we have an ordered extent then we already are holding a ref on the inode, and we just use btrfs_start_ordered_extent anyway, so there is no reason to have an extra ref on the inode to start work on the ordered extent. Thanks, Signed-off-by:
-
Josef Bacik authored
Forever ago I made the worst case calculator say that we could potentially split into 3 blocks for every level on the way down, which isn't right. If we split we're only going to get two new blocks, the one we originally cow'ed and the new one we're going to split. Thanks, Signed-off-by:
-
Josef Bacik authored
This reverts commit 70afa399. It is causing performance issues and wasn't actually correct. There were problems with the way we flushed delalloc and that was the real cause of the early enospc. Thanks, Signed-off-by:
-
Josef Bacik authored
Various people have hit a deadlock when running btrfs/011. This is because when replacing nocow extents we will take the i_mutex to make sure nobody messes with the file while we are replacing the extent. The problem is we are already holding a transaction open, which is a locking inversion, so instead we need to save these inodes we find and then process them outside of the transaction. Further we can't just lock the inode and assume we are good to go. We need to lock the extent range and then read back the extent cache for the inode to make sure the extent really still points at the physical block we want. If it doesn't we don't have to copy it. Thanks, Signed-off-by:
-
Josef Bacik authored
So if we have dir_index items in the log that means we also have the inode item as well, which means that the inode's i_size is correct. However when we process dir_index'es we call btrfs_add_link() which will increase the directory's i_size for the new entry. To fix this we need to just set the dir items i_size to 0, and then as we find dir_index items we adjust the i_size. btrfs_add_link() will do it for new entries, and if the entry already exists we can just add the name_len to the i_size ourselves. Thanks, Signed-off-by:
-
Josef Bacik authored
A user reported a bug where his log would not replay because he was getting -EEXIST back. This was because he had a file moved into a directory that was logged. What happens is the file had a lower inode number, and so it is processed first when replaying the log, and so we add the inode ref in for the directory it was moved to. But then we process the directories DIR_INDEX item and try to add the inode ref for that inode and it fails because we already added it when we replayed the inode. To solve this problem we need to just process any DIR_INDEX items we have in the log first so this all is taken care of, and then we can replay the rest of the items. With this patch my reproducer can remount the file system properly instead of erroring out. Thanks, Signed-off-by:
-
Josef Bacik authored
Liu introduced a local copy of the last log commit for an inode to make sure we actually log an inode even if a log commit has already taken place. In order to make sure we didn't relog the same inode multiple times he set this local copy to the current trans when we log the inode, because usually we log the inode and then sync the log. The exception to this is during rename, we will relog an inode if the name changed and it is already in the log. The problem with this is then we go to sync the inode, and our check to see if the inode has already been logged is tripped and we don't sync the log. To fix this we need to _also_ check against the roots last log commit, because it could be less than what is in our local copy of the log commit. This fixes a bug where we rename a file into a directory and then fsync the directory and then on remount the directory is no longer there. Thanks, Signed-off-by:
-
Josef Bacik authored
If you just create a directory and then fsync that directory and then pull the power plug you will come back up and the directory will not be there. That is because we won't actually create directories if we've logged files inside of them since they will be created on replay, but in this check we will set our logged_trans of our current directory if it happens to be a directory, making us think it doesn't need to be logged. Fix the logic to only do this to parent directories. Thanks, Signed-off-by:
-
Josef Bacik authored
So forever we have had this thing to limit the amount of delalloc pages we'll setup to be written out to 128mb. This is because we have to lock all the pages in this range, so anything above this gets a bit unweildly, and also without a limit we'll happily allocate gigantic chunks of disk space. Turns out our check for this wasn't quite right, we wouldn't actually limit the chunk we wanted to write out, we'd just stop looking for more space after we went over the limit. So if you do a giant 20gb dd on my box with lots of ram I could get 2gig extents. This is fine normally, except when you go to relocate these extents and we can't find enough space to relocate these moster extents, since we have to be able to allocate exactly the same sized extent to move it around. So fix this by actually enforcing the limit. With this patch I'm no longer seeing giant 1.5gb extents. Thanks, Signed-off-by:
-
Miao Xie authored
By the current code, if the requested size is very large, and all the extents in the free space cache are small, we will waste lots of the cpu time to cut the requested size in half and search the cache again and again until it gets down to the size the allocator can return. In fact, we can know the max extent size in the cache after the first search, so we needn't cut the size in half repeatedly, and just use the max extent size directly. This way can save lots of cpu time and make the performance grow up when there are only fragments in the free space cache. According to my test, if there are only 4KB free space extents in the fs, and the total size of those extents are 256MB, we can reduce the execute time of the following test from 5.4s to 1.4s. dd if=/dev/zero of=<testfile> bs=1MB count=1 oflag=sync Changelog v2 -> v3: - fix the problem that we skip the block group with the space which is less than we need. Changelog v1 -> v2: - address the problem that we return a wrong start position when searching the free space in a bitmap. Signed-off-by:
Miao Xie <miaox@cn.fujitsu.com> Signed-off-by:
-
David Sterba authored
Signed-off-by:
-
Stefan Behrens authored
We want to know if there are debugging features compiled in, this may affect performance. The message is printed before the sanity checks. (This commit message is a copy of David Sterba's commit message when he introduced btrfs_print_info()). Signed-off-by:
-
Filipe David Borba Manana authored
Instead of removing the current inode from the red black tree and then add the new one, just use the red black tree replace operation, which is more efficient. Signed-off-by:
Filipe David Borba Manana <fdmanana@gmail.com> Reviewed-by:
Zach Brown <zab@redhat.com> Signed-off-by:
-
Ilya Dryomov authored
If replace was suspended by the umount, replace target device is added to the fs_devices->alloc_list during a later mount. This is obviously wrong. ->is_tgtdev_for_dev_replace is supposed to guard against that, but ->is_tgtdev_for_dev_replace is (and can only ever be) initialized *after* everything is opened and fs_devices lists are populated. Fix this by checking the devid instead: for replace targets it's always equal to BTRFS_DEV_REPLACE_DEVID. Cc: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Reviewed-by:
-
Josef Bacik authored
If we failed to actually allocate the correct size of the extent to relocate we will end up in an infinite loop because we won't return an error, we'll just move on to the next extent. So fix this up by returning an error, and then fix all the callers to return an error up the stack rather than BUG_ON()'ing. Thanks, Signed-off-by:
-
Chris Mason authored
Linux 3.11
-
- 20 Sep, 2013 12 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI and power management fixes from Rafael Wysocki: 1) Four fixes for cpufreq regressions introduced by the changes that removed Device Tree parsing for CPU device nodes from cpufreq drivers from Sudeep KarkadaNagesha. 2) Two fixes for recent cpufreq regressions introduced by changes related to the preservation of sysfs attributes over system suspend/resume cycles from Viresh Kumar. 3) Fix for ACPI-based wakeup signaling in the PCI subsystem that fails to stop PME polling for devices put into the D3cold power state from Rafael J Wysocki. 4) Fix for bad interactions between cpufreq and udev on systems supporting intel_pstate where acpi-cpufreq is available as well from Yinghai Lu. * tag 'pm+acpi-3.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: return EEXIST instead of EBUSY for second registering PCI / ACPI / PM: Clear pme_poll for devices in D3cold on wakeup ARM: shmobile: change dev_id to cpu0 while registering cpu clock ARM: i.MX: change dev_id to cpu0 while registering cpu clock cpufreq: imx6q-cpufreq: assign cpu_dev correctly to cpu0 device cpufreq: cpufreq-cpu0: assign cpu_dev correctly to cpu0 device cpufreq: unlock correct rwsem while updating policy->cpu cpufreq: Clear policy->cpus bits in __cpufreq_remove_dev_finish() -
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds authored
Pull vhost updates from Michael Tsirkin: "vhost: minor changes on top of 3.12-rc1 This fixes module loading for vhost-scsi, and tweaks locking in vhost core a bit. Both of these are not exactly release blockers but it's early in the cycle so I think it's a good idea to apply them now" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vhost-scsi: whitespace tweak vhost/scsi: use vmalloc for order-10 allocation vhost: wake up worker outside spin_lock
-
David Howells authored
Don't try to dump the index key that distinguishes an object if netfs data in the cookie the object refers to has been cleared (ie. the cookie has passed most of the way through __fscache_relinquish_cookie()). Since the netfs holds the index key, we can't get at it once the ->def and ->netfs_data pointers have been cleared - and a NULL pointer exception will ensue, usually just after a: CacheFiles: Error: Unexpected object collision error is reported. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Josh Boyer authored
In cachefiles_check_auxdata(), we allocate auxbuf but fail to free it if we determine there's an error or that the data is stale. Further, assigning the output of vfs_getxattr() to auxbuf->len gives problems with checking for errors as auxbuf->len is a u16. We don't actually need to set auxbuf->len, so keep the length in a variable for now. We shouldn't need to check the upper limit of the buffer as an overflow there should be indicated by -ERANGE. While we're at it, fscache_check_aux() returns an enum value, not an int, so assign it to an appropriately typed variable rather than to ret. Signed-off-by:
Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by:
-
Will Deacon authored
The cmpxchg() function tends not to support 64-bit arguments on 32-bit architectures. This could be either due to use of unsigned long arguments (like on ARM) or lack of instruction support (cmpxchgq on x86). However, these architectures may implement a specific cmpxchg64() function to provide 64-bit cmpxchg support instead. Since the lockref code requires a 64-bit cmpxchg and relies on the architecture selecting ARCH_USE_CMPXCHG_LOCKREF, move to using cmpxchg64 instead of cmpxchg and allow 32-bit architectures to make use of the lockless lockref implementation. Cc: Waiman Long <Waiman.Long@hp.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Rafael J. Wysocki authored
* pm-cpufreq: cpufreq: return EEXIST instead of EBUSY for second registering ARM: shmobile: change dev_id to cpu0 while registering cpu clock ARM: i.MX: change dev_id to cpu0 while registering cpu clock cpufreq: imx6q-cpufreq: assign cpu_dev correctly to cpu0 device cpufreq: cpufreq-cpu0: assign cpu_dev correctly to cpu0 device cpufreq: unlock correct rwsem while updating policy->cpu cpufreq: Clear policy->cpus bits in __cpufreq_remove_dev_finish()
-
Rafael J. Wysocki authored
* acpi-pci: PCI / ACPI / PM: Clear pme_poll for devices in D3cold on wakeup
-
git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64Linus Torvalds authored
Pull ARM64 fixes from Catalin Marinas: - Compat register fault reporting fix - Documentation clarification on tagged pointers - hwcap widened to 64-bit (user space already reading it as 64-bit) * tag 'arm64-stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: arm64: Widen hwcap to be 64 bit arm64: Correctly report LR and SP for compat tasks arm64: documentation: tighten up tagged pointer documentation arm64: Make do_bad_area() function static
-
Steve Capper authored
Under arm64 elf_hwcap is a 32 bit quantity, but it is stored in a 64 bit auxiliary ELF field and glibc reads hwcap as 64 bit. This patch widens elf_hwcap to be 64 bit. Signed-off-by:
Steve Capper <steve.capper@arm.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com>
-
Catalin Marinas authored
When a task crashes and we print debugging information, ensure that compat tasks show the actual AArch32 LR and SP registers rather than the AArch64 ones. Signed-off-by: -
Will Deacon authored
Commit d50240a5 ("arm64: mm: permit use of tagged pointers at EL0") added support for tagged pointers in userspace, but the corresponding update to Documentation/ contained some imprecise statements. This patch fixes up some minor ambiguities in the text, hopefully making it more clear about exactly what the kernel expects from user virtual addresses. Signed-off-by:
-
Catalin Marinas authored
This function is only called from arch/arm64/mm/fault.c. Signed-off-by:
-
