- 20 Dec, 2021 7 commits
-
-
Sean Christopherson authored
Update the documentation for kvm-intel's emulate_invalid_guest_state to rectify the description of KVM's default behavior, and to document that the behavior and thus parameter only applies to L1. Fixes: a27685c3 ("KVM: VMX: Emulate invalid guest state by default") Signed-off-by:
Sean Christopherson <seanjc@google.com> Message-Id: <20211207193006.120997-4-seanjc@google.com> Reviewed-by:
Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
Synthesize a triple fault if L2 guest state is invalid at the time of VM-Enter, which can happen if L1 modifies SMRAM or if userspace stuffs guest state via ioctls(), e.g. KVM_SET_SREGS. KVM should never emulate invalid guest state, since from L1's perspective, it's architecturally impossible for L2 to have invalid state while L2 is running in hardware. E.g. attempts to set CR0 or CR4 to unsupported values will either VM-Exit or #GP. Modifying vCPU state via RSM+SMRAM and ioctl() are the only paths that can trigger this scenario, as nested VM-Enter correctly rejects any attempt to enter L2 with invalid state. RSM is a straightforward case as (a) KVM follows AMD's SMRAM layout and behavior, and (b) Intel's SDM states that loading reserved CR0/CR4 bits via RSM results in shutdown, i.e. there is precedent for KVM's behavior. Following AMD's SMRAM layout is important as AMD's layout saves/restores the descriptor cache information, including CS.RPL and SS.RPL, and also defines all the fields relevant to invalid guest state as read-only, i.e. so long as the vCPU had valid state before the SMI, which is guaranteed for L2, RSM will generate valid state unless SMRAM was modified. Intel's layout saves/restores only the selector, which means that scenarios where the selector and cached RPL don't match, e.g. conforming code segments, would yield invalid guest state. Intel CPUs fudge around this issued by stuffing SS.RPL and CS.RPL on RSM. Per Intel's SDM on the "Default Treatment of RSM", paraphrasing for brevity: IF internal storage indicates that the [CPU was post-VMXON] THEN enter VMX operation (root or non-root); restore VMX-critical state as defined in Section 34.14.1; set to their fixed values any bits in CR0 and CR4 whose values must be fixed in VMX operation [unless coming from an unrestricted guest]; IF RFLAGS.VM = 0 AND (in VMX root operation OR the “unrestricted guest” VM-execution control is 0) THEN CS.RPL := SS.DPL; SS.RPL := SS.DPL; FI; restore current VMCS pointer; FI; Note that Intel CPUs also overwrite the fixed CR0/CR4 bits, whereas KVM will sythesize TRIPLE_FAULT in this scenario. KVM's behavior is allowed as both Intel and AMD define CR0/CR4 SMRAM fields as read-only, i.e. the only way for CR0 and/or CR4 to have illegal values is if they were modified by the L1 SMM handler, and Intel's SDM "SMRAM State Save Map" section states "modifying these registers will result in unpredictable behavior". KVM's ioctl() behavior is less straightforward. Because KVM allows ioctls() to be executed in any order, rejecting an ioctl() if it would result in invalid L2 guest state is not an option as KVM cannot know if a future ioctl() would resolve the invalid state, e.g. KVM_SET_SREGS, or drop the vCPU out of L2, e.g. KVM_SET_NESTED_STATE. Ideally, KVM would reject KVM_RUN if L2 contained invalid guest state, but that carries the risk of a false positive, e.g. if RSM loaded invalid guest state and KVM exited to userspace. Setting a flag/request to detect such a scenario is undesirable because (a) it's extremely unlikely to add value to KVM as a whole, and (b) KVM would need to consider ioctl() interactions with such a flag, e.g. if userspace migrated the vCPU while the flag were set. Cc: stable@vger.kernel.org Signed-off-by: -
Sean Christopherson authored
Revert a relatively recent change that set vmx->fail if the vCPU is in L2 and emulation_required is true, as that behavior is completely bogus. Setting vmx->fail and synthesizing a VM-Exit is contradictory and wrong: (a) it's impossible to have both a VM-Fail and VM-Exit (b) vmcs.EXIT_REASON is not modified on VM-Fail (c) emulation_required refers to guest state and guest state checks are always VM-Exits, not VM-Fails. For KVM specifically, emulation_required is handled before nested exits in __vmx_handle_exit(), thus setting vmx->fail has no immediate effect, i.e. KVM calls into handle_invalid_guest_state() and vmx->fail is ignored. Setting vmx->fail can ultimately result in a WARN in nested_vmx_vmexit() firing when tearing down the VM as KVM never expects vmx->fail to be set when L2 is active, KVM always reflects those errors into L1. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 21158 at arch/x86/kvm/vmx/nested.c:4548 nested_vmx_vmexit+0x16bd/0x17e0 arch/x86/kvm/vmx/nested.c:4547 Modules linked in: CPU: 0 PID: 21158 Comm: syz-executor.1 Not tainted 5.16.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:nested_vmx_vmexit+0x16bd/0x17e0 arch/x86/kvm/vmx/nested.c:4547 Code: <0f> 0b e9 2e f8 ff ff e8 57 b3 5d 00 0f 0b e9 00 f1 ff ff 89 e9 80 Call Trace: vmx_leave_nested arch/x86/kvm/vmx/nested.c:6220 [inline] nested_vmx_free_vcpu+0x83/0xc0 arch/x86/kvm/vmx/nested.c:330 vmx_free_vcpu+0x11f/0x2a0 arch/x86/kvm/vmx/vmx.c:6799 kvm_arch_vcpu_destroy+0x6b/0x240 arch/x86/kvm/x86.c:10989 kvm_vcpu_destroy+0x29/0x90 arch/x86/kvm/../../../virt/kvm/kvm_main.c:441 kvm_free_vcpus arch/x86/kvm/x86.c:11426 [inline] kvm_arch_destroy_vm+0x3ef/0x6b0 arch/x86/kvm/x86.c:11545 kvm_destroy_vm arch/x86/kvm/../../../virt/kvm/kvm_main.c:1189 [inline] kvm_put_kvm+0x751/0xe40 arch/x86/kvm/../../../virt/kvm/kvm_main.c:1220 kvm_vcpu_release+0x53/0x60 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3489 __fput+0x3fc/0x870 fs/file_table.c:280 task_work_run+0x146/0x1c0 kernel/task_work.c:164 exit_task_work include/linux/task_work.h:32 [inline] do_exit+0x705/0x24f0 kernel/exit.c:832 do_group_exit+0x168/0x2d0 kernel/exit.c:929 get_signal+0x1740/0x2120 kernel/signal.c:2852 arch_do_signal_or_restart+0x9c/0x730 arch/x86/kernel/signal.c:868 handle_signal_work kernel/entry/common.c:148 [inline] exit_to_user_mode_loop kernel/entry/common.c:172 [inline] exit_to_user_mode_prepare+0x191/0x220 kernel/entry/common.c:207 __syscall_exit_to_user_mode_work kernel/entry/common.c:289 [inline] syscall_exit_to_user_mode+0x2e/0x70 kernel/entry/common.c:300 do_syscall_64+0x53/0xd0 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: c8607e4a ("KVM: x86: nVMX: don't fail nested VM entry on invalid guest state if !from_vmentry") Reported-by: syzbot+f1d2136db9c80d4733e8@syzkaller.appspotmail.com Reviewed-by: -
Andrew Jones authored
Attempting to compile on a non-x86 architecture fails with include/kvm_util.h: In function ‘vm_compute_max_gfnâ€
™ : include/kvm_util.h:79:21: error: dereferencing pointer to incomplete type ‘struct kvm_vm’ return ((1ULL << vm->pa_bits) >> vm->page_shift) - 1; ^~ This is because the declaration of struct kvm_vm is in lib/kvm_util_internal.h as an effort to make it private to the test lib code. We can still provide arch specific functions, though, by making the generic function symbols weak. Do that to fix the compile error. Fixes: c8cc43c1 ("selftests: KVM: avoid failures due to reserved HyperTransport region") Cc: stable@vger.kernel.org Signed-off-by:Andrew Jones <drjones@redhat.com> Message-Id: <20211214151842.848314-1-drjones@redhat.com> Signed-off-by:
-
Marc Orr authored
The kvm_run struct's if_flag is a part of the userspace/kernel API. The SEV-ES patches failed to set this flag because it's no longer needed by QEMU (according to the comment in the source code). However, other hypervisors may make use of this flag. Therefore, set the flag for guests with encrypted registers (i.e., with guest_state_protected set). Fixes: f1c6366e ("KVM: SVM: Add required changes to support intercepts under SEV-ES") Signed-off-by:
Marc Orr <marcorr@google.com> Message-Id: <20211209155257.128747-1-marcorr@google.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Sean Christopherson authored
After dropping mmu_lock in the TDP MMU, restart the iterator during tdp_iter_next() and do not advance the iterator. Advancing the iterator results in skipping the top-level SPTE and all its children, which is fatal if any of the skipped SPTEs were not visited before yielding. When zapping all SPTEs, i.e. when min_level == root_level, restarting the iter and then invoking tdp_iter_next() is always fatal if the current gfn has as a valid SPTE, as advancing the iterator results in try_step_side() skipping the current gfn, which wasn't visited before yielding. Sprinkle WARNs on iter->yielded being true in various helpers that are often used in conjunction with yielding, and tag the helper with __must_check to reduce the probabily of improper usage. Failing to zap a top-level SPTE manifests in one of two ways. If a valid SPTE is skipped by both kvm_tdp_mmu_zap_all() and kvm_tdp_mmu_put_root(), the shadow page will be leaked and KVM will WARN accordingly. WARNING: CPU: 1 PID: 3509 at arch/x86/kvm/mmu/tdp_mmu.c:46 [kvm] RIP: 0010:kvm_mmu_uninit_tdp_mmu+0x3e/0x50 [kvm] Call Trace: <TASK> kvm_arch_destroy_vm+0x130/0x1b0 [kvm] kvm_destroy_vm+0x162/0x2a0 [kvm] kvm_vcpu_release+0x34/0x60 [kvm] __fput+0x82/0x240 task_work_run+0x5c/0x90 do_exit+0x364/0xa10 ? futex_unqueue+0x38/0x60 do_group_exit+0x33/0xa0 get_signal+0x155/0x850 arch_do_signal_or_restart+0xed/0x750 exit_to_user_mode_prepare+0xc5/0x120 syscall_exit_to_user_mode+0x1d/0x40 do_syscall_64+0x48/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae If kvm_tdp_mmu_zap_all() skips a gfn/SPTE but that SPTE is then zapped by kvm_tdp_mmu_put_root(), KVM triggers a use-after-free in the form of marking a struct page as dirty/accessed after it has been put back on the free list. This directly triggers a WARN due to encountering a page with page_count() == 0, but it can also lead to data corruption and additional errors in the kernel. WARNING: CPU: 7 PID: 1995658 at arch/x86/kvm/../../../virt/kvm/kvm_main.c:171 RIP: 0010:kvm_is_zone_device_pfn.part.0+0x9e/0xd0 [kvm] Call Trace: <TASK> kvm_set_pfn_dirty+0x120/0x1d0 [kvm] __handle_changed_spte+0x92e/0xca0 [kvm] __handle_changed_spte+0x63c/0xca0 [kvm] __handle_changed_spte+0x63c/0xca0 [kvm] __handle_changed_spte+0x63c/0xca0 [kvm] zap_gfn_range+0x549/0x620 [kvm] kvm_tdp_mmu_put_root+0x1b6/0x270 [kvm] mmu_free_root_page+0x219/0x2c0 [kvm] kvm_mmu_free_roots+0x1b4/0x4e0 [kvm] kvm_mmu_unload+0x1c/0xa0 [kvm] kvm_arch_destroy_vm+0x1f2/0x5c0 [kvm] kvm_put_kvm+0x3b1/0x8b0 [kvm] kvm_vcpu_release+0x4e/0x70 [kvm] __fput+0x1f7/0x8c0 task_work_run+0xf8/0x1a0 do_exit+0x97b/0x2230 do_group_exit+0xda/0x2a0 get_signal+0x3be/0x1e50 arch_do_signal_or_restart+0x244/0x17f0 exit_to_user_mode_prepare+0xcb/0x120 syscall_exit_to_user_mode+0x1d/0x40 do_syscall_64+0x4d/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae Note, the underlying bug existed even before commit 1af4a960 ("KVM: x86/mmu: Yield in TDU MMU iter even if no SPTES changed") moved calls to tdp_mmu_iter_cond_resched() to the beginning of loops, as KVM could still incorrectly advance past a top-level entry when yielding on a lower-level entry. But with respect to leaking shadow pages, the bug was introduced by yielding before processing the current gfn. Alternatively, tdp_mmu_iter_cond_resched() could simply fall through, or callers could jump to their "retry" label. The downside of that approach is that tdp_mmu_iter_cond_resched() _must_ be called before anything else in the loop, and there's no easy way to enfornce that requirement. Ideally, KVM would handling the cond_resched() fully within the iterator macro (the code is actually quite clean) and avoid this entire class of bugs, but that is extremely difficult do while also supporting yielding after tdp_mmu_set_spte_atomic() fails. Yielding after failing to set a SPTE is very desirable as the "owner" of the REMOVED_SPTE isn't strictly bounded, e.g. if it's zapping a high-level shadow page, the REMOVED_SPTE may block operations on the SPTE for a significant amount of time. Fixes: faaf05b0 ("kvm: x86/mmu: Support zapping SPTEs in the TDP MMU") Fixes: 1af4a960 ("KVM: x86/mmu: Yield in TDU MMU iter even if no SPTES changed") Reported-by:
Ignat Korchagin <ignat@cloudflare.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Wei Wang authored
The fixed counter 3 is used for the Topdown metrics, which hasn't been enabled for KVM guests. Userspace accessing to it will fail as it's not included in get_fixed_pmc(). This breaks KVM selftests on ICX+ machines, which have this counter. To reproduce it on ICX+ machines, ./state_test reports: ==== Test Assertion Failure ==== lib/x86_64/processor.c:1078: r == nmsrs pid=4564 tid=4564 - Argument list too long 1 0x000000000040b1b9: vcpu_save_state at processor.c:1077 2 0x0000000000402478: main at state_test.c:209 (discriminator 6) 3 0x00007fbe21ed5f92: ?? ??:0 4 0x000000000040264d: _start at ??:? Unexpected result from KVM_GET_MSRS, r: 17 (failed MSR was 0x30c) With this patch, it works well. Signed-off-by:
Wei Wang <wei.w.wang@intel.com> Message-Id: <20211217124934.32893-1-wei.w.wang@intel.com> Signed-off-by:
-
- 19 Dec, 2021 3 commits
-
-
Sean Christopherson authored
Play nice with a NULL shadow page when checking for an obsolete root in the page fault handler by flagging the page fault as stale if there's no shadow page associated with the root and KVM_REQ_MMU_RELOAD is pending. Invalidating memslots, which is the only case where _all_ roots need to be reloaded, requests all vCPUs to reload their MMUs while holding mmu_lock for lock. The "special" roots, e.g. pae_root when KVM uses PAE paging, are not backed by a shadow page. Running with TDP disabled or with nested NPT explodes spectaculary due to dereferencing a NULL shadow page pointer. Skip the KVM_REQ_MMU_RELOAD check if there is a valid shadow page for the root. Zapping shadow pages in response to guest activity, e.g. when the guest frees a PGD, can trigger KVM_REQ_MMU_RELOAD even if the current vCPU isn't using the affected root. I.e. KVM_REQ_MMU_RELOAD can be seen with a completely valid root shadow page. This is a bit of a moot point as KVM currently unloads all roots on KVM_REQ_MMU_RELOAD, but that will be cleaned up in the future. Fixes: a955cad8 ("KVM: x86/mmu: Retry page fault if root is invalidated by memslot update") Cc: stable@vger.kernel.org Cc: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by:
-
Vitaly Kuznetsov authored
Host initiated writes to MSR_IA32_PERF_CAPABILITIES should not depend on guest visible CPUIDs and (incorrect) KVM logic implementing it is about to change. Also, KVM_SET_CPUID{,2} after KVM_RUN is now forbidden and causes test to fail. Reported-by:kernel test robot <oliver.sang@intel.com> Fixes: feb627e8 ("KVM: x86: Forbid KVM_SET_CPUID{,2} after KVM_RUN") Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20211216165213.338923-2-vkuznets@redhat.com> Signed-off-by:
-
Vitaly Kuznetsov authored
The ability to write to MSR_IA32_PERF_CAPABILITIES from the host should not depend on guest visible CPUID entries, even if just to allow creating/restoring guest MSRs and CPUIDs in any sequence. Fixes: 27461da3 ("KVM: x86/pmu: Support full width counting") Suggested-by:
-
- 10 Dec, 2021 6 commits
-
-
Sean Christopherson authored
Add an x86 selftest to verify that KVM doesn't WARN or otherwise explode if userspace modifies RCX during a userspace exit to handle string I/O. This is a regression test for a user-triggerable WARN introduced by commit 3b27de27 ("KVM: x86: split the two parts of emulator_pio_in"). Signed-off-by:
-
Sean Christopherson authored
Replace a WARN with a comment to call out that userspace can modify RCX during an exit to userspace to handle string I/O. KVM doesn't actually support changing the rep count during an exit, i.e. the scenario can be ignored, but the WARN needs to go as it's trivial to trigger from userspace. Cc: stable@vger.kernel.org Fixes: 3b27de27 ("KVM: x86: split the two parts of emulator_pio_in") Signed-off-by:
-
Lai Jiangshan authored
In the SDM: If the logical processor is in 64-bit mode or if CR4.PCIDE = 1, an attempt to clear CR0.PG causes a general-protection exception (#GP). Software should transition to compatibility mode and clear CR4.PCIDE before attempting to disable paging. Signed-off-by:
Lai Jiangshan <laijs@linux.alibaba.com> Message-Id: <20211207095230.53437-1-jiangshanlai@gmail.com> Signed-off-by:
-
Paolo Bonzini authored
AMD proceessors define an address range that is reserved by HyperTransport and causes a failure if used for guest physical addresses. Avoid selftests failures by reserving those guest physical addresses; the rules are: - On parts with <40 bits, its fully hidden from software. - Before Fam17h, it was always 12G just below 1T, even if there was more RAM above this location. In this case we just not use any RAM above 1T. - On Fam17h and later, it is variable based on SME, and is either just below 2^48 (no encryption) or 2^43 (encryption). Fixes: ef4c9f4f ("KVM: selftests: Fix 32-bit truncation of vm_get_max_gfn()") Cc: stable@vger.kernel.org Cc: David Matlack <dmatlack@google.com> Reported-by:
-
Sean Christopherson authored
Do not bail early if there are no bits set in the sparse banks for a non-sparse, a.k.a. "all CPUs", IPI request. Per the Hyper-V spec, it is legal to have a variable length of '0', e.g. VP_SET's BankContents in this case, if the request can be serviced without the extra info. It is possible that for a given invocation of a hypercall that does accept variable sized input headers that all the header input fits entirely within the fixed size header. In such cases the variable sized input header is zero-sized and the corresponding bits in the hypercall input should be set to zero. Bailing early results in KVM failing to send IPIs to all CPUs as expected by the guest. Fixes: 214ff83d ("KVM: x86: hyperv: implement PV IPI send hypercalls") Cc: stable@vger.kernel.org Signed-off-by:
-
Vitaly Kuznetsov authored
Prior to commit 0baedd79 ("KVM: x86: make Hyper-V PV TLB flush use tlb_flush_guest()"), kvm_hv_flush_tlb() was using 'KVM_REQ_TLB_FLUSH | KVM_REQUEST_NO_WAKEUP' when making a request to flush TLBs on other vCPUs and KVM_REQ_TLB_FLUSH is/was defined as: (0 | KVM_REQUEST_WAIT | KVM_REQUEST_NO_WAKEUP) so KVM_REQUEST_WAIT was lost. Hyper-V TLFS, however, requires that "This call guarantees that by the time control returns back to the caller, the observable effects of all flushes on the specified virtual processors have occurred." and without KVM_REQUEST_WAIT there's a small chance that the vCPU making the TLB flush will resume running before all IPIs get delivered to other vCPUs and a stale mapping can get read there. Fix the issue by adding KVM_REQUEST_WAIT flag to KVM_REQ_TLB_FLUSH_GUEST: kvm_hv_flush_tlb() is the sole caller which uses it for kvm_make_all_cpus_request()/kvm_make_vcpus_request_mask() where KVM_REQUEST_WAIT makes a difference. Cc: stable@kernel.org Fixes: 0baedd79 ("KVM: x86: make Hyper-V PV TLB flush use tlb_flush_guest()") Signed-off-by:
-
- 09 Dec, 2021 1 commit
-
-
Maciej S. Szmigiero authored
INTERCEPT_x are bit positions, but the code was using the raw value of INTERCEPT_VINTR (4) instead of BIT(INTERCEPT_VINTR). This resulted in masking of bit 2 - that is, SMI instead of VINTR. Signed-off-by:Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Message-Id: <49b9571d25588870db5380b0be1a41df4bbaaf93.1638486479.git.maciej.szmigiero@oracle.com>
-
- 08 Dec, 2021 1 commit
-
-
Vitaly Kuznetsov authored
When KVM runs as a nested hypervisor on top of Hyper-V it uses Enlightened VMCS and enables Enlightened MSR Bitmap feature for its L1s and L2s (which are actually L2s and L3s from Hyper-V's perspective). When MSR bitmap is updated, KVM has to reset HV_VMX_ENLIGHTENED_CLEAN_FIELD_MSR_BITMAP from clean fields to make Hyper-V aware of the change. For KVM's L1s, this is done in vmx_disable_intercept_for_msr()/vmx_enable_intercept_for_msr(). MSR bitmap for L2 is build in nested_vmx_prepare_msr_bitmap() by blending MSR bitmap for L1 and L1's idea of MSR bitmap for L2. KVM, however, doesn't check if the resulting bitmap is different and never cleans HV_VMX_ENLIGHTENED_CLEAN_FIELD_MSR_BITMAP in eVMCS02. This is incorrect and may result in Hyper-V missing the update. The issue could've been solved by calling evmcs_touch_msr_bitmap() for eVMCS02 from nested_vmx_prepare_msr_bitmap() unconditionally but doing so would not give any performance benefits (compared to not using Enlightened MSR Bitmap at all). 3-level nesting is also not a very common setup nowadays. Don't enable 'Enlightened MSR Bitmap' feature for KVM's L2s (real L3s) for now. Signed-off-by:
-
- 05 Dec, 2021 12 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull parisc fixes from Helge Deller: "Some bug and warning fixes: - Fix "make install" to use debians "installkernel" script which is now in /usr/sbin - Fix the bindeb-pkg make target by giving the correct KBUILD_IMAGE file name - Fix compiler warnings by annotating parisc agp init functions with __init - Fix timekeeping on SMP machines with dual-core CPUs - Enable some more config options in the 64-bit defconfig" * tag 'for-5.16/parisc-6' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Mark cr16 CPU clocksource unstable on all SMP machines parisc: Fix "make install" on newer debian releases parisc/agp: Annotate parisc agp init functions with __init parisc: Enable sata sil, audit and usb support on 64-bit defconfig parisc: Fix KBUILD_IMAGE for self-extracting kernel -
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are some small USB fixes for a few reported issues. Included in here are: - xhci fix for a _much_ reported regression. I don't think there's a community distro that has not reported this problem yet :( - new USB quirk addition - cdns3 minor fixes - typec regression fix. All of these have been in linux-next with no reported problems, and the xhci fix has been reported by many to resolve their reported problem" * tag 'usb-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: cdnsp: Fix a NULL pointer dereference in cdnsp_endpoint_init() usb: cdns3: gadget: fix new urb never complete if ep cancel previous requests usb: typec: tcpm: Wait in SNK_DEBOUNCED until disconnect USB: NO_LPM quirk Lenovo Powered USB-C Travel Hub xhci: Fix commad ring abort, write all 64 bits to CRCR register. -
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial fixes from Greg KH: "Here are some small TTY and Serial driver fixes for 5.16-rc4 to resolve a number of reported problems. They include: - liteuart serial driver fixes - 8250_pci serial driver fixes for pericom devices - 8250 RTS line control fix while in RS-485 mode - tegra serial driver fix - msm_serial driver fix - pl011 serial driver new id - fsl_lpuart revert of broken change - 8250_bcm7271 serial driver fix - MAINTAINERS file update for rpmsg tty driver that came in 5.16-rc1 - vgacon fix for reported problem All of these, except for the 8250_bcm7271 fix have been in linux-next with no reported problem. The 8250_bcm7271 fix was added to the tree on Friday so no chance to be linux-next yet. But it should be fine as the affected developers submitted it" * tag 'tty-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: 8250_bcm7271: UART errors after resuming from S2 serial: 8250_pci: rewrite pericom_do_set_divisor() serial: 8250_pci: Fix ACCES entries in pci_serial_quirks array serial: 8250: Fix RTS modem control while in rs485 mode Revert "tty: serial: fsl_lpuart: drop earlycon entry for i.MX8QXP" serial: tegra: Change lower tolerance baud rate limit for tegra20 and tegra30 serial: liteuart: relax compile-test dependencies serial: liteuart: fix minor-number leak on probe errors serial: liteuart: fix use-after-free and memleak on unbind serial: liteuart: Fix NULL pointer dereference in ->remove() vgacon: Propagate console boot parameters before calling `vc_resize' tty: serial: msm_serial: Deactivate RX DMA for polling support serial: pl011: Add ACPI SBSA UART match id serial: core: fix transmit-buffer reset and memleak MAINTAINERS: Add rpmsg tty driver maintainer
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fix from Borislav Petkov: - Prevent a tick storm when a dedicated timekeeper CPU in nohz_full mode runs for prolonged periods with interrupts disabled and ends up programming the next tick in the past, leading to that storm * tag 'timers_urgent_for_v5.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timers/nohz: Last resort update jiffies on nohz_full IRQ entry
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Borislav Petkov: - Properly init uclamp_flags of a runqueue, on first enqueuing - Fix preempt= callback return values - Correct utime/stime resource usage reporting on nohz_full to return the proper times instead of shorter ones * tag 'sched_urgent_for_v5.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/uclamp: Fix rq->uclamp_max not set on first enqueue preempt/dynamic: Fix setup_preempt_mode() return value sched/cputime: Fix getrusage(RUSAGE_THREAD) with nohz_full
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Borislav Petkov: - Fix a couple of SWAPGS fencing issues in the x86 entry code - Use the proper operand types in __{get,put}_user() to prevent truncation in SEV-ES string io - Make sure the kernel mappings are present in trampoline_pgd in order to prevent any potential accesses to unmapped memory after switching to it - Fix a trivial list corruption in objtool's pv_ops validation - Disable the clocksource watchdog for TSC on platforms which claim that the TSC is constant, doesn't stop in sleep states, CPU has TSC adjust and the number of sockets of the platform are max 2, to prevent erroneous markings of the TSC as unstable. - Make sure TSC adjust is always checked not only when going idle - Prevent a stack leak by initializing struct _fpx_sw_bytes properly in the FPU code - Fix INTEL_FAM6_RAPTORLAKE define naming to adhere to the convention * tag 'x86_urgent_for_v5.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/xen: Add xenpv_restore_regs_and_return_to_usermode() x86/entry: Use the correct fence macro after swapgs in kernel CR3 x86/entry: Add a fence for kernel entry SWAPGS in paranoid_entry() x86/sev: Fix SEV-ES INS/OUTS instructions for word, dword, and qword x86/64/mm: Map all kernel memory into trampoline_pgd objtool: Fix pv_ops noinstr validation x86/tsc: Disable clocksource watchdog for TSC on qualified platorms x86/tsc: Add a timer to make sure TSC_adjust is always checked x86/fpu/signal: Initialize sw_bytes in save_xstate_epilog() x86/cpu: Drop spurious underscore from RAPTOR_LAKE #define -
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull more kvm fixes from Paolo Bonzini: - Static analysis fix - New SEV-ES protocol for communicating invalid VMGEXIT requests - Ensure APICv is considered inactive if there is no APIC - Fix reserved bits for AMD PerfEvtSeln register * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: SVM: Do not terminate SEV-ES guests on GHCB validation failure KVM: SEV: Fall back to vmalloc for SEV-ES scratch area if necessary KVM: SEV: Return appropriate error codes if SEV-ES scratch setup fails KVM: x86/mmu: Retry page fault if root is invalidated by memslot update KVM: VMX: Set failure code in prepare_vmcs02() KVM: ensure APICv is considered inactive if there is no APIC KVM: x86/pmu: Fix reserved bits for AMD PerfEvtSeln register
-
Tom Lendacky authored
Currently, an SEV-ES guest is terminated if the validation of the VMGEXIT exit code or exit parameters fails. The VMGEXIT instruction can be issued from userspace, even though userspace (likely) can't update the GHCB. To prevent userspace from being able to kill the guest, return an error through the GHCB when validation fails rather than terminating the guest. For cases where the GHCB can't be updated (e.g. the GHCB can't be mapped, etc.), just return back to the guest. The new error codes are documented in the lasest update to the GHCB specification. Fixes: 291bd20d ("KVM: SVM: Add initial support for a VMGEXIT VMEXIT") Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Message-Id: <b57280b5562893e2616257ac9c2d4525a9aeeb42.1638471124.git.thomas.lendacky@amd.com> Signed-off-by:
-
Sean Christopherson authored
Use kvzalloc() to allocate KVM's buffer for SEV-ES's GHCB scratch area so that KVM falls back to __vmalloc() if physically contiguous memory isn't available. The buffer is purely a KVM software construct, i.e. there's no need for it to be physically contiguous. Cc: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
-
Sean Christopherson authored
Return appropriate error codes if setting up the GHCB scratch area for an SEV-ES guest fails. In particular, returning -EINVAL instead of -ENOMEM when allocating the kernel buffer could be confusing as userspace would likely suspect a guest issue. Fixes: 8f423a80 ("KVM: SVM: Support MMIO for an SEV-ES guest") Cc: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs fix from Darrick Wong: "Remove an unnecessary (and backwards) rename flags check that duplicates a VFS level check" * tag 'xfs-5.16-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: remove incorrect ASSERT in xfs_rename
-
- 04 Dec, 2021 9 commits
-
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "Three SMB3 multichannel/fscache fixes and a DFS fix. In testing multichannel reconnect scenarios recently various problems with the cifs.ko implementation of fscache were found (e.g. incorrect initialization of fscache cookies in some cases)" * tag '5.16-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: avoid use of dstaddr as key for fscache client cookie cifs: add server conn_id to fscache client cookie cifs: wait for tcon resource_id before getting fscache super cifs: fix missed refcounting of ipc tcon
-
Helge Deller authored
In commit c8c37359 ("parisc: Enhance detection of synchronous cr16 clocksources") I assumed that CPUs on the same physical core are syncronous. While booting up the kernel on two different C8000 machines, one with a dual-core PA8800 and one with a dual-core PA8900 CPU, this turned out to be wrong. The symptom was that I saw a jump in the internal clocks printed to the syslog and strange overall behaviour. On machines which have 4 cores (2 dual-cores) the problem isn't visible, because the current logic already marked the cr16 clocksource unstable in this case. This patch now marks the cr16 interval timers unstable if we have more than one CPU in the system, and it fixes this issue. Fixes: c8c37359 ("parisc: Enhance detection of synchronous cr16 clocksources") Signed-off-by:
Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> # v5.15+
-
Helge Deller authored
On newer debian releases the debian-provided "installkernel" script is installed in /usr/sbin. Fix the kernel install.sh script to look for the script in this directory as well. Signed-off-by: -
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fix from Jens Axboe: "A single fix for repeated printk spam from loop" * tag 'block-5.16-2021-12-03' of git://git.kernel.dk/linux-block: loop: Use pr_warn_once() for loop_control_remove() warning
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fix from Jens Axboe: "Just a single fix preventing repeated retries of task_work based io-wq thread creation, fixing a regression from when io-wq was made more (a bit too much) resilient against signals" * tag 'io_uring-5.16-2021-12-03' of git://git.kernel.dk/linux-block: io-wq: don't retry task_work creation failure on fatal conditions
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Two patches, both in drivers. One is a fix to FC recovery (lpfc) and the other is an enhancement to support the Intel Alder Motherboard with the UFS driver which comes under the -rc exception process for hardware enabling" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ufs: ufs-pci: Add support for Intel ADL scsi: lpfc: Fix non-recovery of remote ports following an unsolicited LOGO
-
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2Linus Torvalds authored
Pull gfs2 fixes from Andreas Gruenbacher: - Since commit 486408d6 ("gfs2: Cancel remote delete work asynchronously"), inode create and lookup-by-number can overlap more easily and we can end up with temporary duplicate inodes. Fix the code to prevent that. - Fix a BUG demoting weak glock holders from a remote node. * tag 'gfs2-v5.16-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: gfs2_create_inode rework gfs2: gfs2_inode_lookup rework gfs2: gfs2_inode_lookup cleanup gfs2: Fix remote demote of weak glock holders
-
Qais Yousef authored
Commit d81ae8aa ("sched/uclamp: Fix initialization of struct uclamp_rq") introduced a bug where uclamp_max of the rq is not reset to match the woken up task's uclamp_max when the rq is idle. The code was relying on rq->uclamp_max initialized to zero, so on first enqueue static inline void uclamp_rq_inc_id(struct rq *rq, struct task_struct *p, enum uclamp_id clamp_id) { ... if (uc_se->value > READ_ONCE(uc_rq->value)) WRITE_ONCE(uc_rq->value, uc_se->value); } was actually resetting it. But since commit d81ae8aa changed the default to 1024, this no longer works. And since rq->uclamp_flags is also initialized to 0, neither above code path nor uclamp_idle_reset() update the rq->uclamp_max on first wake up from idle. This is only visible from first wake up(s) until the first dequeue to idle after enabling the static key. And it only matters if the uclamp_max of this task is < 1024 since only then its uclamp_max will be effectively ignored. Fix it by properly initializing rq->uclamp_flags = UCLAMP_FLAG_IDLE to ensure uclamp_idle_reset() is called which then will update the rq uclamp_max value as expected. Fixes: d81ae8aa ("sched/uclamp: Fix initialization of struct uclamp_rq") Signed-off-by:
Qais Yousef <qais.yousef@arm.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by:
Valentin Schneider <Valentin.Schneider@arm.com> Tested-by:
Dietmar Eggemann <dietmar.eggemann@arm.com> Link: https://lkml.kernel.org/r/20211202112033.1705279-1-qais.yousef@arm.com
-
Andrew Halaney authored
__setup() callbacks expect 1 for success and 0 for failure. Correct the usage here to reflect that. Fixes: 826bfeb3 ("preempt/dynamic: Support dynamic preempt with preempt= boot option") Reported-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Andrew Halaney <ahalaney@redhat.com> Signed-off-by:
-
- 03 Dec, 2021 1 commit
-
-
git://github.com/awilliam/linux-vfioLinus Torvalds authored
Pull VFIO fixes from Alex Williamson: - Fix OpRegion pointer arithmetic (Zhenyu Wang) - Fix comment format triggering kernel-doc warnings (Randy Dunlap) * tag 'vfio-v5.16-rc4' of git://github.com/awilliam/linux-vfio: vfio/pci: Fix OpRegion read vfio: remove all kernel-doc notation
-
