Skip to content

L
linux
Switch branch/tag
  1. 18 Jan, 2019 3 commits
    • Linus Torvalds's avatar
      Merge tag 'drm-fixes-2019-01-18' of git://anongit.freedesktop.org/drm/drm · 1092a94f
      Linus Torvalds authored 
      Pull drm fixes from Dave Airlie:
 "The rc3 fixes are a bit scattered:

   - meson, sun4i and rockchip all had missing of_node_put.

   - qxl and virtio both were advertising dma-buf to userspace when they
     really shouldn't have.

  Otherwise:

  meson:
   - modesetting regression fix

  i915 GVT:
   - one cmd parser failure fix
   - region cleanup fix in vGPU destroy

  amdgpu:
   - KFD fixes for arm64 mixed APU/DGPU
   - vega12 powerplay fix
   - raven DC fixes
   - freesync fix"

* tag 'drm-fixes-2019-01-18' of git://anongit.freedesktop.org/drm/drm:
  drm/amd/display: Detach backlight from stream
  drm/sun4i: backend: add missing of_node_puts
  Revert "drm/amdgpu: validate user pitch alignment"
  Revert "drm/amdgpu: validate user GEM object size"
  drm/meson: Fix atomic mode switching regression
  drm/i915/gvt: Fix mmap range check
  drm/i915/gvt: free VFIO region space in vgpu detach
  drm/amd/display: Fix disabled cursor on top screen edge
  drm/amd/display: fix warning on raven hotplug
  drm/amd/display: fix PME notification not working in RV desktop
  drm/amd/display: Only get the connector state for VRR when toggled
  drm/amd/display: Pack DMCU iRAM alignment
  drm/amd/powerplay: run acg btc for Vega12
  drm/amdkfd: Don't assign dGPUs to APU topology devices
  drm/amdkfd: Allow building KFD on ARM64 (v2)
  drm/meson: add missing of_node_put
  drm/virtio: drop prime import/export callbacks
  drm/qxl: drop prime import/export callbacks
  drm/i915/gvt: Allow F_CMD_ACCESS on mmio 0x21f0
  drm/rockchip: add missing of_node_put
      1092a94f
    • Linus Torvalds's avatar
      Merge tag 'led-fix-for-5.0-rc3' of... · 2451f371
      Linus Torvalds authored 
      Merge tag 'led-fix-for-5.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds

Pull LED fix from Jacek Anaszewski.

* tag 'led-fix-for-5.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
  leds: lp5523: fix a missing check of return value of lp55xx_read
      2451f371
    • Linus Torvalds's avatar
      Merge tag 'hwmon-for-v5.0-rc3' of... · 0a2fbed8
      Linus Torvalds authored 
      Merge tag 'hwmon-for-v5.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:
 "Minor fixes/regressions"

* tag 'hwmon-for-v5.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (tmp421) Correct the misspelling of the tmp442 compatible attribute in OF device ID table
  hwmon: (occ) Fix potential integer overflow
  hwmon: (lm80) Fix missing unlock on error in set_fan_div()
  hwmon: (nct6775) Enable IO mapping for NCT6797D and NCT6798D
  hwmon: (nct6775) Fix chip ID for NCT6798D
      0a2fbed8
  3. 17 Jan, 2019 18 commits
  5. 16 Jan, 2019 11 commits
  7. 15 Jan, 2019 8 commits
    • Julia Lawall's avatar
      drm/sun4i: backend: add missing of_node_puts · 4bb0e6d7
      Julia Lawall authored 
      The device node iterators perform an of_node_get on each
iteration, so a jump out of the loop requires an of_node_put.

Remote and port also have augmented reference counts, so drop them
on each iteration and at the end of the function, respectively.
Remote is only used for the address it contains, not for the
contents of that address, so the reference count can be dropped
immediately.

The semantic patch that fixes the first part of this problem is
as follows (http://coccinelle.lip6.fr):

// <smpl>
@@
expression root,e;
local idexpression child;
iterator name for_each_child_of_node;
@@

 for_each_available_child_of_node(root, child) {
   ... when != of_node_put(child)
       when != e = child
+  of_node_put(child);
?  break;
   ...
}
... when != child
// </smpl>
Signed-off-by: default avatarJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: default avatarMaxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1547369264-24831-5-git-send-email-Julia.Lawall@lip6.fr
      4bb0e6d7
    • Tycho Andersen's avatar
      seccomp: fix UAF in user-trap code · a811dc61
      Tycho Andersen authored 
      On the failure path, we do an fput() of the listener fd if the filter fails
to install (e.g. because of a TSYNC race that's lost, or if the thread is
killed, etc.). fput() doesn't actually release the fd, it just ads it to a
work queue. Then the thread proceeds to free the filter, even though the
listener struct file has a reference to it.

To fix this, on the failure path let's set the private data to null, so we
know in ->release() to ignore the filter.

Reported-by: syzbot+981c26489b2d1c6316ba@syzkaller.appspotmail.com
Fixes: 6a21cc50 ("seccomp: add a return code to trap to userspace")
Signed-off-by: default avatarTycho Andersen <tycho@tycho.ws>
Acked-by: default avatarKees Cook <keescook@chromium.org>
Signed-off-by: default avatarJames Morris <james.morris@microsoft.com>
      a811dc61
    • Linus Torvalds's avatar
      Merge tag 'trace-v5.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace · 7939f8be
      Linus Torvalds authored 
      Pull tracing fix from Steven Rostedt:
 "Andrea Righi fixed a NULL pointer dereference in trace_kprobe_create()

  It is possible to trigger a NULL pointer dereference by writing an
  incorrectly formatted string to the krpobe_events file"

* tag 'trace-v5.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing/kprobes: Fix NULL pointer dereference in trace_kprobe_create()
      7939f8be
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · e8746440
      Linus Torvalds authored 
      Pull networking fixes from David Miller:

 1) Fix regression in multi-SKB responses to RTM_GETADDR, from Arthur
    Gautier.

 2) Fix ipv6 frag parsing in openvswitch, from Yi-Hung Wei.

 3) Unbounded recursion in ipv4 and ipv6 GUE tunnels, from Stefano
    Brivio.

 4) Use after free in hns driver, from Yonglong Liu.

 5) icmp6_send() needs to handle the case of NULL skb, from Eric
    Dumazet.

 6) Missing rcu read lock in __inet6_bind() when operating on mapped
    addresses, from David Ahern.

 7) Memory leak in tipc-nl_compat_publ_dump(), from Gustavo A. R. Silva.

 8) Fix PHY vs r8169 module loading ordering issues, from Heiner
    Kallweit.

 9) Fix bridge vlan memory leak, from Ido Schimmel.

10) Dev refcount leak in AF_PACKET, from Jason Gunthorpe.

11) Infoleak in ipv6_local_error(), flow label isn't completely
    initialized. From Eric Dumazet.

12) Handle mv88e6390 errata, from Andrew Lunn.

13) Making vhost/vsock CID hashing consistent, from Zha Bin.

14) Fix lack of UMH cleanup when it unexpectedly exits, from Taehee Yoo.

15) Bridge forwarding must clear skb->tstamp, from Paolo Abeni.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (87 commits)
  bnxt_en: Fix context memory allocation.
  bnxt_en: Fix ring checking logic on 57500 chips.
  mISDN: hfcsusb: Use struct_size() in kzalloc()
  net: clear skb->tstamp in bridge forwarding path
  net: bpfilter: disallow to remove bpfilter module while being used
  net: bpfilter: restart bpfilter_umh when error occurred
  net: bpfilter: use cleanup callback to release umh_info
  umh: add exit routine for UMH process
  isdn: i4l: isdn_tty: Fix some concurrency double-free bugs
  vhost/vsock: fix vhost vsock cid hashing inconsistent
  net: stmmac: Prevent RX starvation in stmmac_napi_poll()
  net: stmmac: Fix the logic of checking if RX Watchdog must be enabled
  net: stmmac: Check if CBS is supported before configuring
  net: stmmac: dwxgmac2: Only clear interrupts that are active
  net: stmmac: Fix PCI module removal leak
  tools/bpf: fix bpftool map dump with bitfields
  tools/bpf: test btf bitfield with >=256 struct member offset
  bpf: fix bpffs bitfield pretty print
  net: ethernet: mediatek: fix warning in phy_start_aneg
  tcp: change txhash on SYN-data timeout
  ...
      e8746440
    • Andrea Righi's avatar
      tracing/kprobes: Fix NULL pointer dereference in trace_kprobe_create() · 8b05a3a7
      Andrea Righi authored 
      It is possible to trigger a NULL pointer dereference by writing an
incorrectly formatted string to krpobe_events (trying to create a
kretprobe omitting the symbol).

Example:

 echo "r:event_1 " >> /sys/kernel/debug/tracing/kprobe_events

That triggers this:

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
 #PF error: [normal kernel read fault]
 PGD 0 P4D 0
 Oops: 0000 [#1] SMP PTI
 CPU: 6 PID: 1757 Comm: bash Not tainted 5.0.0-rc1+ #125
 Hardware name: Dell Inc. XPS 13 9370/0F6P3V, BIOS 1.5.1 08/09/2018
 RIP: 0010:kstrtoull+0x2/0x20
 Code: 28 00 00 00 75 17 48 83 c4 18 5b 41 5c 5d c3 b8 ea ff ff ff eb e1 b8 de ff ff ff eb da e8 d6 36 bb ff 66 0f 1f 44 00 00 31 c0 <80> 3f 2b 55 48 89 e5 0f 94 c0 48 01 c7 e8 5c ff ff ff 5d c3 66 2e
 RSP: 0018:ffffb5d482e57cb8 EFLAGS: 00010246
 RAX: 0000000000000000 RBX: 0000000000000001 RCX: ffffffff82b12720
 RDX: ffffb5d482e57cf8 RSI: 0000000000000000 RDI: 0000000000000000
 RBP: ffffb5d482e57d70 R08: ffffa0c05e5a7080 R09: ffffa0c05e003980
 R10: 0000000000000000 R11: 0000000040000000 R12: ffffa0c04fe87b08
 R13: 0000000000000001 R14: 000000000000000b R15: ffffa0c058d749e1
 FS:  00007f137c7f7740(0000) GS:ffffa0c05e580000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000000 CR3: 0000000497d46004 CR4: 00000000003606e0
 Call Trace:
  ? trace_kprobe_create+0xb6/0x840
  ? _cond_resched+0x19/0x40
  ? _cond_resched+0x19/0x40
  ? __kmalloc+0x62/0x210
  ? argv_split+0x8f/0x140
  ? trace_kprobe_create+0x840/0x840
  ? trace_kprobe_create+0x840/0x840
  create_or_delete_trace_kprobe+0x11/0x30
  trace_run_command+0x50/0x90
  trace_parse_run_command+0xc1/0x160
  probes_write+0x10/0x20
  __vfs_write+0x3a/0x1b0
  ? apparmor_file_permission+0x1a/0x20
  ? security_file_permission+0x31/0xf0
  ? _cond_resched+0x19/0x40
  vfs_write+0xb1/0x1a0
  ksys_write+0x55/0xc0
  __x64_sys_write+0x1a/0x20
  do_syscall_64+0x5a/0x120
  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fix by doing the proper argument checks in trace_kprobe_create().

Cc: Ingo Molnar <mingo@redhat.com>
Link: https://lore.kernel.org/lkml/20190111095108.b79a2ee026185cbd62365977@kernel.org
Link: http://lkml.kernel.org/r/20190111060113.GA22841@xps-13
Fixes: 6212dd29 ("tracing/kprobes: Use dyn_event framework for kprobe events")
Acked-by: default avatarMasami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: default avatarAndrea Righi <righi.andrea@gmail.com>
Signed-off-by: default avatarMasami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: default avatarSteven Rostedt (VMware) <rostedt@goodmis.org>
      8b05a3a7
    • Michel Dänzer's avatar
      Revert "drm/amdgpu: validate user pitch alignment" · 92b0730e
      Michel Dänzer authored 
      The check turned out to be too strict in some cases.
Reviewed-by: default avatarAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: default avatarMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
      92b0730e
    • Alex Deucher's avatar
      Revert "drm/amdgpu: validate user GEM object size" · 25ec429e
      Alex Deucher authored 
      It was at the same time too strict (for linear tiling modes, where no
height alignment is required) and too lenient (for 2D tiling modes,
where height may need to be aligned to values > 8).
Acked-by: default avatarAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: default avatarMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
      25ec429e
    • Neil Armstrong's avatar
      drm/meson: Fix atomic mode switching regression · ce0210c1
      Neil Armstrong authored 
      Since commit 2bcd3eca when switching mode from X11 (ubuntu mate for
example) the display gets blurry, looking like an invalid framebuffer width.

This commit fixed atomic crtc modesetting in a totally wrong way and
introduced a local unnecessary ->enabled crtc state.

This commit reverts the crctc _begin() and _enable() changes and simply
adds drm_atomic_helper_commit_tail_rpm as helper.
Reported-by: default avatarTony McKahan <tonymckahan@gmail.com>
Suggested-by: default avatarDaniel Vetter <daniel@ffwll.ch>
Fixes: 2bcd3eca ("drm/meson: Fixes for drm_crtc_vblank_on/off support")
Signed-off-by: default avatarNeil Armstrong <narmstrong@baylibre.com>
Acked-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
[narmstrong: fixed blank line issue from checkpatch]
Link: https://patchwork.freedesktop.org/patch/msgid/20190114153118.8024-1-narmstrong@baylibre.com
      ce0210c1
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7