- 09 Jan, 2020 28 commits
-
-
Thomas Bogendoerfer authored
Our chosen byte swapping, which is what firmware already uses, is to do readl/writel by normal lw/sw intructions (data invariance). This also means we need to mangle addresses for u8 and u16 accesses. The mangling for 16bit has been done aready, but 8bit one was missing. Correcting this causes different addresses for accesses to the SuperIO and local bus of the IOC3 chip. This is fixed by changing byte order in ioc3 and m48rtc_rtc structs. Acked-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by:
Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: David S. Miller <davem@davemloft.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-rtc@vger.kernel.org
-
Thomas Bogendoerfer authored
Implented mapping of PCI INTB/C/D, which is needed for PCI multifunction devices, PCI-PCI bridges and IOC3. Signed-off-by:
-
Thomas Bogendoerfer authored
per_cpu_init is called exactly once for every CPU. So there is no need for protection via slice_map. Signed-off-by:
-
Thomas Bogendoerfer authored
Remember CPU speed while scanning for available CPUs to avoid looking it up a second time when printing CPU speed. Signed-off-by:
-
Thomas Bogendoerfer authored
Reduce number of reserved interrupts by removing bits copied from IRIX and not used by Linux. Signed-off-by:
-
Thomas Bogendoerfer authored
Move all IP27 declarations into one file. Signed-off-by:
-
Thomas Bogendoerfer authored
IP35 has a different way to find out regions, so we move the IP27 implementation to IP27 specific file. Signed-off-by:
-
Thomas Bogendoerfer authored
Convert printing of error status registers to use structs, which are defines for IP27 and IP35. Signed-off-by:
-
Thomas Bogendoerfer authored
The upcoming header files for SGI-IP35 shouldn't add new typedef. To be able to share ip27-hubio.c we need to access register layouts no longer via a typedef. Signed-off-by:
-
Thomas Bogendoerfer authored
SGI-IP35 uses slightly different memory layout, so we move IP27 defines to IP27 specific files and keep the common stuff in kldir.h Signed-off-by:
-
Thomas Bogendoerfer authored
get_nasid() will be different for SGI-IP35, therefore move IP27 implementation to IP27 specific file. Signed-off-by:
-
Thomas Bogendoerfer authored
Extracting node id from HUB register is specific to IP27 alias SN0. Move the macro definition to a SN0 header file. Signed-off-by:
-
Thomas Bogendoerfer authored
The only piece needed in ip27.h is SEND_NMI. Move the define to the only place where it's used and remove ip27.h Signed-off-by:
-
Thomas Bogendoerfer authored
By including agent.h where hub related defines/structs are needed, we have only one place to select, which agent chip (HUB or BEDROCK) is used. Signed-off-by:
-
Thomas Bogendoerfer authored
By using cpu physid already present when scanning for CPUs get_cpu_slice() is unsued and can be removed together with two other then used functions. Signed-off-by:
-
Thomas Bogendoerfer authored
Replication is done on a per node basis, so the use of cpumask was a misusage here. Signed-off-by:
-
Paul Burton authored
Commit 716850ab ("MIPS: eBPF: Initial eBPF support for MIPS32 architecture.") enabled our eBPF JIT for MIPS32 kernels, whereas it has previously only been availailable for MIPS64. It was my understanding at the time that the BPF test suite was passing & JITing a comparable number of tests to our cBPF JIT [1], but it turns out that was not the case. The eBPF JIT has a number of problems on MIPS32: - Most notably various code paths still result in emission of MIPS64 instructions which will cause reserved instruction exceptions & kernel panics when run on MIPS32 CPUs. - The eBPF JIT doesn't account for differences between the O32 ABI used by MIPS32 kernels versus the N64 ABI used by MIPS64 kernels. Notably arguments beyond the first 4 are passed on the stack in O32, and this is entirely unhandled when JITing a BPF_CALL instruction. Stack space must be reserved for arguments even if they all fit in registers, and the callee is free to assume that stack space has been reserved for its use - with the eBPF JIT this is not the case, so calling any function can result in clobbering values on the stack & unpredictable behaviour. Function arguments in eBPF are always 64-bit values which is also entirely unhandled - the JIT still uses a single (32-bit) register per argument. As a result all function arguments are always passed incorrectly when JITing a BPF_CALL instruction, leading to kernel crashes or strange behavior. - The JIT attempts to bail our on use of ALU64 instructions or 64-bit memory access instructions. The code doing this at the start of build_one_insn() incorrectly checks whether BPF_OP() equals BPF_DW, when it should really be checking BPF_SIZE() & only doing so when BPF_CLASS() is one of BPF_{LD,LDX,ST,STX}. This results in false positives that cause more bailouts than intended, and that in turns hides some of the problems described above. - The kernel's cBPF->eBPF translation makes heavy use of 64-bit eBPF instructions that the MIPS32 eBPF JIT bails out on, leading to most cBPF programs not being JITed at all. Until these problems are resolved, revert the removal of the cBPF JIT performed by commit 716850ab ("MIPS: eBPF: Initial eBPF support for MIPS32 architecture."). Together with commit f8fffebd ("MIPS: BPF: Disable MIPS32 eBPF JIT") this restores MIPS32 BPF JIT behavior back to the same state it was prior to the introduction of the broken eBPF JIT support. [1] https://lore.kernel.org/linux-mips/MWHPR2201MB13583388481F01A422CE7D66D4410@MWHPR2201MB1358.namprd22.prod.outlook.com/Signed-off-by:
-
Mao Wenan authored
There is no need to have the 'T *v' variable static since new value always be assigned before use it. Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Mao Wenan <maowenan@huawei.com> Signed-off-by:
-
Thomas Bogendoerfer authored
Implement placing of per_cpu into memory, which is local to the CPU. Signed-off-by:
-
Thomas Bogendoerfer authored
Local node distance is defined as LOCAL_DISTANCE, which is 10. Use the define to give back correct local distance. Signed-off-by:
-
Thomas Bogendoerfer authored
node_distance must return values starting from 10 up to 255. 10 means local, 255 unreachable. Signed-off-by:
-
周琰杰 (Zhou Yanjie) authored
1.Add X1830 system type for cat /proc/cpuinfo to give out X1830. 2.Change "PRID_IMP_XBURST" to "PRID_IMP_XBURST_REV1" and add a new "PRID_IMP_XBURST_REV2" for new Ingenic CPUs which has XBurst with MXU2 SIMD ISA. Notice: 1."PRID_IMP_XBURST_REV2" is corresponds to the latest XBurst processor with 128bit MXU2 SIMD instruction set, not the upcoming XBurst2 processor. This version of the processors fixes issues such as BTB and HPTLB. 2.In order to simplify and reuse the code, the "c->cputype" and the "c->writecombine" and the "__cpu_name[cpu]" in the original "PRID_IMP_XBURST" (now is "PRID_IMP_XBURST_REV1") are removed, and the corresponding settings are abtained through fall-through to "PRID_IMP_XBURST_REV2", which will cause the name that was previously mistakenly called "JZRISC" to become to the real name "XBurst". Signed-off-by:
周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Signed-off-by:
-
周琰杰 (Zhou Yanjie) authored
Add a device tree for the Ingenic X1000 based YSH & ATIL CU Neo board. Signed-off-by:
Paul Cercueil <paul@crapouillou.net> [paulburton@kernel.org: Drop stale mention of previously unselectable Kconfig entry.] Signed-off-by:
-
周琰杰 (Zhou Yanjie) authored
Add Ingenic XBurst based boards, prepare for later dts. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
周琰杰 (Zhou Yanjie) authored
The "yna" is an acronym of the "YSH & ATIL". Signed-off-by:
-
周琰杰 (Zhou Yanjie) authored
Support the Ingenic X1000 SoC using the code under arch/mips/jz4740. This is left unselectable in Kconfig until a X1000 based board is added in a later commit. Signed-off-by:
-
yu kuai authored
If of_find_device_by_node return 0 and ill_acc_of_setup return error, pdev don't have a corresponding object release. Fix it by adding put_device. Signed-off-by:
yu kuai <yukuai3@huawei.com> Signed-off-by:
-
James Hogan authored
I haven't been active for 18 months, and Paul seems to be doing a grand job, so drop me from MIPS maintainership. Signed-off-by:
James Hogan <jhogan@kernel.org> Cc: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@vger.kernel.org Signed-off-by:
-
- 05 Jan, 2020 7 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fixes from Paul Walmsley: "Several fixes for RISC-V: - Fix function graph trace support - Prefix the CSR IRQ_* macro names with "RV_", to avoid collisions with macros elsewhere in the Linux kernel tree named "IRQ_TIMER" - Use __pa_symbol() when computing the physical address of a kernel symbol, rather than __pa() - Mark the RISC-V port as supporting GCOV One DT addition: - Describe the L2 cache controller in the FU540 DT file One documentation update: - Add patch acceptance guideline documentation" * tag 'riscv/for-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: Documentation: riscv: add patch acceptance guidelines riscv: prefix IRQ_ macro names with an RV_ namespace clocksource: riscv: add notrace to riscv_sched_clock riscv: ftrace: correct the condition logic in function graph tracer riscv: dts: Add DT support for SiFive L2 cache controller riscv: gcov: enable gcov for RISC-V riscv: mm: use __pa_symbol for kernel symbols -
Paul Walmsley authored
Formalize, in kernel documentation, the patch acceptance policy for arch/riscv. In summary, it states that as maintainers, we plan to only accept patches for new modules or extensions that have been frozen or ratified by the RISC-V Foundation. We've been following these guidelines for the past few months. In the meantime, we've received quite a bit of feedback that it would be helpful to have these guidelines formally documented. Based on a suggestion from Matthew Wilcox, we also add a link to this file to Documentation/process/index.rst, to make this document easier to find. The format of this document has also been changed to align to the format outlined in the maintainer entry profiles, in accordance with comments from Jon Corbet and Dan Williams. Signed-off-by:
Paul Walmsley <paul.walmsley@sifive.com> Reviewed-by:
Palmer Dabbelt <palmerdabbelt@google.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Krste Asanovic <krste@berkeley.edu> Cc: Andrew Waterman <waterman@eecs.berkeley.edu> Cc: Matthew Wilcox <willy@infradead.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jonathan Corbet <corbet@lwn.net>
-
Paul Walmsley authored
"IRQ_TIMER", used in the arch/riscv CSR header file, is a sufficiently generic macro name that it's used by several source files across the Linux code base. Some of these other files ultimately include the arch/riscv CSR include file, causing collisions. Fix by prefixing the RISC-V csr.h IRQ_ macro names with an RV_ prefix. Fixes: a4c3733d ("riscv: abstract out CSR names for supervisor vs machine mode") Reported-by:
Olof Johansson <olof@lixom.net> Acked-by:
-
Zong Li authored
When enabling ftrace graph tracer, it gets the tracing clock in ftrace_push_return_trace(). Eventually, it invokes riscv_sched_clock() to get the clock value. If riscv_sched_clock() isn't marked with 'notrace', it will call ftrace_push_return_trace() and cause infinite loop. The result of failure as follow: command: echo function_graph >current_tracer [ 46.176787] Unable to handle kernel paging request at virtual address ffffffe04fb38c48 [ 46.177309] Oops [#1] [ 46.177478] Modules linked in: [ 46.177770] CPU: 0 PID: 256 Comm: $d Not tainted 5.5.0-rc1 #47 [ 46.177981] epc: ffffffe00035e59a ra : ffffffe00035e57e sp : ffffffe03a7569b0 [ 46.178216] gp : ffffffe000d29b90 tp : ffffffe03a756180 t0 : ffffffe03a756968 [ 46.178430] t1 : ffffffe00087f408 t2 : ffffffe03a7569a0 s0 : ffffffe03a7569f0 [ 46.178643] s1 : ffffffe00087f408 a0 : 0000000ac054cda4 a1 : 000000000087f411 [ 46.178856] a2 : 0000000ac054cda4 a3 : 0000000000373ca0 a4 : ffffffe04fb38c48 [ 46.179099] a5 : 00000000153e22a8 a6 : 00000000005522ff a7 : 0000000000000005 [ 46.179338] s2 : ffffffe03a756a90 s3 : ffffffe00032811c s4 : ffffffe03a756a58 [ 46.179570] s5 : ffffffe000d29fe0 s6 : 0000000000000001 s7 : 0000000000000003 [ 46.179809] s8 : 0000000000000003 s9 : 0000000000000002 s10: 0000000000000004 [ 46.180053] s11: 0000000000000000 t3 : 0000003fc815749c t4 : 00000000000efc90 [ 46.180293] t5 : ffffffe000d29658 t6 : 0000000000040000 [ 46.180482] status: 0000000000000100 badaddr: ffffffe04fb38c48 cause: 000000000000000f Signed-off-by:
Zong Li <zong.li@sifive.com> Reviewed-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> [paul.walmsley@sifive.com: cleaned up patch description] Fixes: 92e0d143 ("clocksource/drivers/riscv_timer: Provide the sched_clock") Cc: stable@vger.kernel.org Signed-off-by:
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "17 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: hexagon: define ioremap_uc ocfs2: fix the crash due to call ocfs2_get_dlm_debug once less ocfs2: call journal flush to mark journal as empty after journal recovery when mount mm/hugetlb: defer freeing of huge pages if in non-task context mm/gup: fix memory leak in __gup_benchmark_ioctl mm/oom: fix pgtables units mismatch in Killed process message fs/posix_acl.c: fix kernel-doc warnings hexagon: work around compiler crash hexagon: parenthesize registers in asm predicates fs/namespace.c: make to_mnt_ns() static fs/nsfs.c: include headers for missing declarations fs/direct-io.c: include fs/internal.h for missing prototype mm: move_pages: return valid node id in status if the page is already on the target node memcg: account security cred as well to kmemcg kcov: fix struct layout for kcov_remote_arg mm/zsmalloc.c: fix the migrated zspage statistics. mm/memory_hotplug: shrink zones when offlining memory
-
Linus Torvalds authored
Merge tag 'apparmor-pr-2020-01-04' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor Pull apparmor fixes from John Johansen: - performance regression: only get a label reference if the fast path check fails - fix aa_xattrs_match() may sleep while holding a RCU lock - fix bind mounts aborting with -ENOMEM * tag 'apparmor-pr-2020-01-04' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor: apparmor: fix aa_xattrs_match() may sleep while holding a RCU lock apparmor: only get a label reference if the fast path check fails apparmor: fix bind mounts aborting with -ENOMEM
-
- 04 Jan, 2020 5 commits
-
-
John Johansen authored
aa_xattrs_match() is unfortunately calling vfs_getxattr_alloc() from a context protected by an rcu_read_lock. This can not be done as vfs_getxattr_alloc() may sleep regardles of the gfp_t value being passed to it. Fix this by breaking the rcu_read_lock on the policy search when the xattr match feature is requested and restarting the search if a policy changes occur. Fixes: 8e51f908 ("apparmor: Add support for attaching profiles via xattr, presence and value") Reported-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Reported-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
John Johansen <john.johansen@canonical.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds authored
Pull MIPS fixes from Paul Burton: "A collection of MIPS fixes: - Fill the struct cacheinfo shared_cpu_map field with sensible values, notably avoiding issues with perf which was unhappy in the absence of these values. - A boot fix for Loongson 2E & 2F machines which was fallout from some refactoring performed this cycle. - A Kconfig dependency fix for the Loongson CPU HWMon driver. - A couple of VDSO fixes, ensuring gettimeofday() behaves appropriately for kernel configurations that don't include support for a clocksource the VDSO can use & fixing the calling convention for the n32 & n64 VDSOs which would previously clobber the $gp/$28 register. - A build fix for vmlinuz compressed images which were inappropriately building with -fsanitize-coverage despite not being part of the kernel proper, then failing to link due to the missing __sanitizer_cov_trace_pc() function. - A couple of eBPF JIT fixes, including disabling it for MIPS32 due to a large number of issues with the code generated there & reflecting ISA dependencies in Kconfig to enforce that systems which don't support the JIT must include the interpreter" * tag 'mips_fixes_5.5_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: Avoid VDSO ABI breakage due to global register variable MIPS: BPF: eBPF JIT: check for MIPS ISA compliance in Kconfig MIPS: BPF: Disable MIPS32 eBPF JIT MIPS: Prevent link failure with kcov instrumentation MIPS: Kconfig: Use correct form for 'depends on' mips: Fix gettimeofday() in the vdso library MIPS: Fix boot on Fuloong2 systems mips: cacheinfo: report shared CPU map -
Nick Desaulniers authored
Similar to commit 38e45d81 ("sparc64: implement ioremap_uc") define ioremap_uc for hexagon to avoid errors from -Wimplicit-function-definition. Link: http://lkml.kernel.org/r/20191209222956.239798-2-ndesaulniers@google.com Link: https://github.com/ClangBuiltLinux/linux/issues/797 Fixes: e537654b ("lib: devres: add a helper function for ioremap_uc") Signed-off-by:
Nick Desaulniers <ndesaulniers@google.com> Suggested-by:
Nathan Chancellor <natechancellor@gmail.com> Acked-by:
Brian Cain <bcain@codeaurora.org> Cc: Lee Jones <lee.jones@linaro.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Tuowen Zhao <ztuowen@gmail.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Alexios Zavras <alexios.zavras@intel.com> Cc: Allison Randal <allison@lohutok.net> Cc: Will Deacon <will@kernel.org> Cc: Richard Fontana <rfontana@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Gang He authored
Because ocfs2_get_dlm_debug() function is called once less here, ocfs2 file system will trigger the system crash, usually after ocfs2 file system is unmounted. This system crash is caused by a generic memory corruption, these crash backtraces are not always the same, for exapmle, ocfs2: Unmounting device (253,16) on (node 172167785) general protection fault: 0000 [#1] SMP PTI CPU: 3 PID: 14107 Comm: fence_legacy Kdump: Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) RIP: 0010:__kmalloc+0xa5/0x2a0 Code: 00 00 4d 8b 07 65 4d 8b RSP: 0018:ffffaa1fc094bbe8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: d310a8800d7a3faf RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000dc0 RDI: ffff96e68fc036c0 RBP: d310a8800d7a3faf R08: ffff96e6ffdb10a0 R09: 00000000752e7079 R10: 000000000001c513 R11: 0000000004091041 R12: 0000000000000dc0 R13: 0000000000000039 R14: ffff96e68fc036c0 R15: ffff96e68fc036c0 FS: 00007f699dfba540(0000) GS:ffff96e6ffd80000(0000) knlGS:00000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055f3a9d9b768 CR3: 000000002cd1c000 CR4: 00000000000006e0 Call Trace: ext4_htree_store_dirent+0x35/0x100 [ext4] htree_dirblock_to_tree+0xea/0x290 [ext4] ext4_htree_fill_tree+0x1c1/0x2d0 [ext4] ext4_readdir+0x67c/0x9d0 [ext4] iterate_dir+0x8d/0x1a0 __x64_sys_getdents+0xab/0x130 do_syscall_64+0x60/0x1f0 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f699d33a9fb This regression problem was introduced by commit e581595e ("ocfs: no need to check return value of debugfs_create functions"). Link: http://lkml.kernel.org/r/20191225061501.13587-1-ghe@suse.com Fixes: e581595e ("ocfs: no need to check return value of debugfs_create functions") Signed-off-by:Gang He <ghe@suse.com> Acked-by:
Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> [5.3+] Signed-off-by:
-
Kai Li authored
If journal is dirty when mount, it will be replayed but jbd2 sb log tail cannot be updated to mark a new start because journal->j_flag has already been set with JBD2_ABORT first in journal_init_common. When a new transaction is committed, it will be recored in block 1 first(journal->j_tail is set to 1 in journal_reset). If emergency restart happens again before journal super block is updated unfortunately, the new recorded trans will not be replayed in the next mount. The following steps describe this procedure in detail. 1. mount and touch some files 2. these transactions are committed to journal area but not checkpointed 3. emergency restart 4. mount again and its journals are replayed 5. journal super block's first s_start is 1, but its s_seq is not updated 6. touch a new file and its trans is committed but not checkpointed 7. emergency restart again 8. mount and journal is dirty, but trans committed in 6 will not be replayed. This exception happens easily when this lun is used by only one node. If it is used by multi-nodes, other node will replay its journal and its journal super block will be updated after recovery like what this patch does. ocfs2_recover_node->ocfs2_replay_journal. The following jbd2 journal can be generated by touching a new file after journal is replayed, and seq 15 is the first valid commit, but first seq is 13 in journal super block. logdump: Block 0: Journal Superblock Seq: 0 Type: 4 (JBD2_SUPERBLOCK_V2) Blocksize: 4096 Total Blocks: 32768 First Block: 1 First Commit ID: 13 Start Log Blknum: 1 Error: 0 Feature Compat: 0 Feature Incompat: 2 block64 Feature RO compat: 0 Journal UUID: 4ED3822C54294467A4F8E87D2BA4BC36 FS Share Cnt: 1 Dynamic Superblk Blknum: 0 Per Txn Block Limit Journal: 0 Data: 0 Block 1: Journal Commit Block Seq: 14 Type: 2 (JBD2_COMMIT_BLOCK) Block 2: Journal Descriptor Seq: 15 Type: 1 (JBD2_DESCRIPTOR_BLOCK) No. Blocknum Flags 0. 587 none UUID: 00000000000000000000000000000000 1. 8257792 JBD2_FLAG_SAME_UUID 2. 619 JBD2_FLAG_SAME_UUID 3. 24772864 JBD2_FLAG_SAME_UUID 4. 8257802 JBD2_FLAG_SAME_UUID 5. 513 JBD2_FLAG_SAME_UUID JBD2_FLAG_LAST_TAG ... Block 7: Inode Inode: 8257802 Mode: 0640 Generation: 57157641 (0x3682809) FS Generation: 2839773110 (0xa9437fb6) CRC32: 00000000 ECC: 0000 Type: Regular Attr: 0x0 Flags: Valid Dynamic Features: (0x1) InlineData User: 0 (root) Group: 0 (root) Size: 7 Links: 1 Clusters: 0 ctime: 0x5de5d870 0x11104c61 -- Tue Dec 3 11:37:20.286280801 2019 atime: 0x5de5d870 0x113181a1 -- Tue Dec 3 11:37:20.288457121 2019 mtime: 0x5de5d870 0x11104c61 -- Tue Dec 3 11:37:20.286280801 2019 dtime: 0x0 -- Thu Jan 1 08:00:00 1970 ... Block 9: Journal Commit Block Seq: 15 Type: 2 (JBD2_COMMIT_BLOCK) The following is journal recovery log when recovering the upper jbd2 journal when mount again. syslog: ocfs2: File system on device (252,1) was not unmounted cleanly, recovering it. fs/jbd2/recovery.c:(do_one_pass, 449): Starting recovery pass 0 fs/jbd2/recovery.c:(do_one_pass, 449): Starting recovery pass 1 fs/jbd2/recovery.c:(do_one_pass, 449): Starting recovery pass 2 fs/jbd2/recovery.c:(jbd2_journal_recover, 278): JBD2: recovery, exit status 0, recovered transactions 13 to 13 Due to first commit seq 13 recorded in journal super is not consistent with the value recorded in block 1(seq is 14), journal recovery will be terminated before seq 15 even though it is an unbroken commit, inode 8257802 is a new file and it will be lost. Link: http://lkml.kernel.org/r/20191217020140.2197-1-li.kai4@h3c.comSigned-off-by:
Kai Li <li.kai4@h3c.com> Reviewed-by:
Changwei Ge <gechangwei@live.cn> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by:
-
