- 19 Sep, 2014 3 commits
-
-
Chris Wilson authored
Oops, apparently intel_hdmi/intel_dp is the encoder - an object with a distinct lifetime to the connector, and so we cannot simply reuse the common function to unset and free the edid. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
830 is very unhappy of the watermark value is too low (indicating a very high watermark in fact, ie. memory fetch will occur with an almost full FIFO). Limit the watermark value to at least 8 cache lines. That also matches the burst size we use on most platforms. BSpec seems to indicate we should limit the watermark to 'burst size + 1'. But on gen4 we already use a hardcoded 8 as the watermark value (as the spec says we should), so just use 8 as the limit on gen2/3 as well. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Ville Syrjälä authored
The spec says: "For the correct operation of the muxed DVO pins (GDEVSELB/ I2Cdata, GIRDBY/I2CClk) and (GFRAMEB/DVI_Data, GTRDYB/DVI_Clk): Bit 31 (DPLL VCO Enable) and Bit 30 (2X Clock Enable) must be set to “1” in both the DPLL A Control Register (06014h-06017h) and DPLL B Control Register (06018h-0601Bh)." The pipe A and B force quirks take care of DPLL_VCO_ENABLE, so we just need a bit of special care to handle DPLL_DVO_2X_MODE. v2: Recompute num_dvo_pipes on the spot, use PIPE_A/PIPE_B instead of pipe/!pipe for the register offsets in disable (Daniel) Add a comment about the ordering in enable and another one about filtering out the DVO 2x bit in state readout Signed-off-by:
-
- 18 Sep, 2014 1 commit
-
-
git://linuxtv.org/pinchartl/fbdevDave Airlie authored
Commit "drm/rcar-du: Use struct videomode in platform data" touches board code in arch/arm/mach-shmobile. There is, to the best of my knowledge, no risk of conflict for v3.18. Simon, are you fine with getting those changes merged through Dave's tree (and could you confirm that no conflict should occur) ? Simon acked the merge: Acked-by:
Simon Horman <horms+renesas@verge.net.au> * 'drm/next/du' of git://linuxtv.org/pinchartl/fbdev: drm/rcar-du: Add OF support drm/rcar-du: Use struct videomode in platform data video: Add DT bindings for the R-Car Display Unit video: Add THC63LVDM83D DT bindings documentation video: Add ADV7123 DT bindings documentation video: Add DT binding documentation for VGA connector devicetree: Add vendor prefix "thine" to vendor-prefixes.txt devicetree: Add vendor prefix "mitsubishi" to vendor-prefixes.txt drm/shmob: Update copyright notice drm/rcar-du: Update copyright notice
-
- 17 Sep, 2014 9 commits
-
-
Kees Cook authored
While zone->name is currently hard coded, the call to kobject_init_and_add() should follow the more defensive argument list usage (as already done in other places in ttm_memory.c) where "%s" is used instead of directly passing in a variable as a format string. Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Ezequiel Garcia authored
In order to support the "enable GPIO" available in many panel devices, this commit adds a proper devicetree binding. By providing an enable GPIO in the devicetree, the driver can now turn off and on the panel device, and/or the backlight device. Both the backlight and the GPIO are optional properties. Tested-by:
Darren Etheridge <detheridge@ti.com> Tested-by:
Johannes Pointner <johannes.pointner@br-automation.com> Signed-off-by:
Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by:
-
Ezequiel Garcia authored
Instead of setting an initial value for the return code, set it explicitly on each error path. This is just a cosmetic cleanup, as preparation for the enable GPIO support. Tested-by:
-
Ezequiel Garcia authored
The current backlight support is broken; the driver expects a backlight-class in the panel devicetree node. Fix this by implementing it properly, getting an optional backlight from a phandle. This shouldn't cause any backward-compatibility DT issue because the current implementation doesn't work and is not even documented. Tested-by:
-
Ezequiel Garcia authored
Using the managed variant to allocate the resource makes the code simpler and less error-prone. Tested-by:
-
Ezequiel Garcia authored
Just a cosmetic cleanup. Tested-by:
-
Ezequiel Garcia authored
Just a trivial cleanup to remove the variable. Tested-by:
-
Ezequiel Garcia authored
This commit adds the missing calls to of_node_put to release the node that's currently held by the of_get_child_by_name() call in the panel info parsing code. Tested-by:
-
Ezequiel Garcia authored
The current error path calls tilcdc_unload() in case of an error to release the resources. However, this is wrong because not all resources have been allocated by the time an error occurs in tilcdc_load(). To fix it, this commit adds proper labels to bail out at the different stages in the load function, and release only the resources actually allocated. Tested-by:
-
- 16 Sep, 2014 4 commits
-
-
git://anongit.freedesktop.org/drm-intelDave Airlie authored
- final bits (again) for the rotation support (Sonika Jindal) - support bl_power in the intel backlight (Jani) - vdd handling improvements from Ville - i830M fixes from Ville - piles of prep work all over to make skl enabling just plug in (Damien, Sonika) - rename DP training defines to reflect latest edp standards, this touches all drm drivers supporting DP (Sonika Jindal) - cache edids during single detect cycle to avoid re-reading it for e.g. audio, from Chris - move w/a for registers which are stored in the hw context to the context init code (Arun&Damien) - edp panel power sequencer fixes, helps chv a lot (Ville) - piles of other chv fixes all over - much more paranoid pageflip handling with stall detection and better recovery from Chris - small things all over, as usual * tag 'drm-intel-next-2014-09-05' of git://anongit.freedesktop.org/drm-intel: (114 commits) drm/i915: Update DRIVER_DATE to 20140905 drm/i915: Decouple the stuck pageflip on modeset drm/i915: Check for a stalled page flip after each vblank drm/i915: Introduce a for_each_plane() macro drm/i915: Rewrite ABS_DIFF() in a safer manner drm/i915: Add comments explaining the vdd on/off functions drm/i915: Move DP port disable to post_disable for pch platforms drm/i915: Enable DP port earlier drm/i915: Turn on panel power before doing aux transfers drm/i915: Be more careful when picking the initial power sequencer pipe drm/i915: Reset power sequencer pipe tracking when disp2d is off drm/i915: Track which port is using which pipe's power sequencer drm/i915: Fix edp vdd locking drm/i915: Reset the HEAD pointer for the ring after writing START drm/i915: Fix unsafe vma iteration in i915_drop_caches drm/i915: init sprites with univeral plane init function drm/i915: Check of !HAS_PCH_SPLIT() in PCH transcoder funcs drm/i915: Use HAS_GMCH_DISPLAY un underrun reporting code drm/i915: Use IS_BROADWELL() instead of IS_GEN8() in forcewake code drm/i915: Don't call gen8_fbc_sw_flush() on chv ...
-
ssh://people.freedesktop.org/~/linuxDave Airlie authored
Pull in first set of changes from Ben for ast on ppc. I've done a quick boot test on x86 and it still seems to boot. * 'drm-next-ast-fixes' of ssh://people.freedesktop.org/~/linux: drm/ast: Cleanup analog init code path drm/ast: Don't assume DVO enabled means SIL164 on uninitialized chips drm/ast: Properly initialize P2A base before using it in ast_init_3rdtx() drm/ast: POST chip at probe time if VGA not enabled drm/ast: Try to use MMIO registers when PIO isn't supported
-
Y.C. Chen authored
Signed-off-by:
Egbert Eich <eich@suse.com> Tested-by:
Steven You2 Liang <liangyou2@lenovo.com> Signed-off-by:
Y.C. Chen <yc_chen@aspeedtech.com> v3: based on [PATCH 1/2] drm/ast: Add missing entry to dclk_table[]. Add reduced blanking modes, improve mode matching to identify these modes by thier sync polarities. [airlied: argh whitespace damage] Signed-off-by:
-
Dave Airlie authored
This is requested to get the fixes for intel and radeon into the same tree for future development work. i915_display.c: fix missing dev_priv conflict.
-
- 15 Sep, 2014 23 commits
-
-
git://anongit.freedesktop.org/git/nouveau/linux-2.6Dave Airlie authored
This is the main merge request for Nouveau 3.18, overview: - various bits of roy's gt21x clock work - various bits of kepler memory clock work (don't get too excited, there's at least one more major bit left that's busting higher freqs) - misc fan control improvements - kepler hdmi infoframe fixes - dp audio - l2 cache + cbc improvements * 'linux-3.18' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: (68 commits) drm/gt214-/disp: enable dp audio drm/gt214-/kms: fix hda eld regression drm/g94-/disp: calculate some dp audio constants drm/gt214-/kms: perform hda codec setup on displayport too drm/gk104-/disp: infoframe registers moved yet again on kepler drm/nouveau/bios: parse older ramcfg/timing data like we do newer ones drm/nva3/fb/ram: Per-partition regs drm/nouveau/fb/ram: Support strided regs drm/nv50/fb/ram: Store the number of partitions in the designated fields drm/nv50/kms: Set VBLANK time in modeset script drm/nouveau/bios: Add rammap support for version 1.0 drm/gf100-/pwr/memx: block host and fifo around reclock drm/nouveau/pwr/memx: fix command ordering around block/unblock drm/nouveau/pwr/memx: rename fb off/on to block/unblock drm/nva3/clk: Pause the GPU before reclocking drm/nouveau/gpio: rename g92 class to g94 drm/gk104-/fb/ram: move fb enable/disable to same place as nvidia drm/gk104/fb/ram: twiddle some more bits when reclocking drm/nouveau/bios: parse another large chunk of random memory config data drm/gk104-/fb/ram: perform certain steps only when bios data differs ...
-
Ben Skeggs authored
Signed-off-by:Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
NVIDIA appear to have tweaked the algorithm from GF110, this implements the previous algorithm for them still. Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Thanks to Vincent Pelletier for pointing this out and providing a proof of concept patch on the list. Signed-off-by: -
Ben Skeggs authored
Done after discussion with Roy. Signed-off-by: -
Roy Spliet authored
Signed-off-by:
Roy Spliet <rspliet@eclipso.eu> Signed-off-by:
-
Roy Spliet authored
Signed-off-by:
-
Roy Spliet authored
Signed-off-by:
-
Roy Spliet authored
Solves blinking on reclocking memory. The value set is an underestimate, but with non-reduced vblanking this should give us plenty of time Signed-off-by:
-
Roy Spliet authored
Signed-off-by:
-
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
More accurate as to the function of the opcodes. Not only is FB disabled, but the host is prevented from touching the GPU. An upcoming patch for Kepler will also halt PFIFO (as NVIDIA does). Signed-off-by: -
Roy Spliet authored
V2: always call post correctly even if pre fails V3: move function prototype to nva3.h Signed-off-by: -
Emil Velikov authored
nv92 hardware has only 16 interrupt lines, while nv94 and later has 32. Accessing 0xe0c{0,4} registers on nv92 can lead to incorrect PDISP setup. This is a regression introduced with commit 9d0f5ec9ee0fd5dc5fc1cc2cf559286431e406e3 Author: Ben Skeggs <bskeggs@redhat.com> Date: Mon May 12 15:22:42 2014 +1000 gpio: split g92 class from nv50 Reported-by: estece on #nouveau Cc: stable@vger.kernel.org # 3.16+ Signed-off-by:Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by:
-
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
*when* this is done is only a rough approximation of what the binary driver does.. need to investigate more to see if it matters Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Awful, awful. But, on the GK106 I have, some upcoming patches show that this is actually necessary after all. Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
All the other chipsets should be moved over to this too. It's not needed yet for the upcoming commits, so left this step as it'll conflict badly with Roy's GT21x reclocking work. Signed-off-by:
-
