This patch (a) removes dead code, (b) renames some static functions with
names that are more apropriate for static functions, and (c) implements a
slave_configure() function.

With the patch I just sent to Linus (et al.) to fix the SCSI core to allow
slave_configure() to tweak (meaningfully) the two variables I need to set,
we'll be able to remove US_FL_MODE_XLATE.

(Well, actually, we also need to fix sr.c to respect the use_10_for_ms
flag, but that should be easy once the rest is done.)

This patch implements US_PR_DEVICE and US_SC_DEVICE, which have the meaning
'use the device's value -- no override'.  This should make maintance
easier, and also allow for those few devices that change their descriptors
depending on what they are connected to.

This will also print a message to help us identify entries that can be
pruned.

Finally, it removes a couple of dead flags.

Some minor cleanups.  First, some locking in the bus-reset.  Next, we move
current_sg into struct us_data (why make more memory allocation issues for
ourselves?).  Next, we change sm_state into a normal variable, since it
shouldn't require atomic_t anytmore.  Finally, we remove some references to
a couple of flags that don't do anything anymore.

# Fix device locking during the bus-reset routine.
#
# Embed current_sg in struct us_data.
#
# Make us->sm_state a regular int instead of an atomic_t.
#
# Remove a couple of references to the START_STOP and IGNORE_SER
# flag bits.

into kroah.com:/home/greg/linux/BK/gregkh-2.5

Some printers report errors (like out of paper or offline) without
setting the main "I have an error" bit.  I see this on my home
printer and someone else has confirmed it for me, suggesting that
we check the printer error status bits independently, ordering
them as we see fit, so here's a patch that does that.

This resolves a problem that appears when relinking
a bulk or control QH that has a partially completed
multi-packet qTD.  Some I/O could be repeated.

Such cases can happen when an empty QH starts to unlink,
but gets re-activated (by queueing the multi-packet qTD)
before the HC saw the unlink.  It's rarely an issue with
control traffic (transfers are so small) or when bulk
queues are active (the QH won't empty).

Lots of small fixes and I merged the PCI subsystem with i386 again
because it was mostly identical. This makes the patch quite big,
but it only removes files.

 - Merge PCI subsystem with i386.

   This changes the initialization order of PCI and IOMMU slightly.  It
   didn't see any problems yet, but it could cause some in theory.  It
   re-adds some code that used to be removed, but it's only small stuff
   and it should hopefully cause less mainteance overhead longer term.

 - Fix warnings
 - Merge cpuid.c with i386.c
 - Sync msr.c with i386
 - Consolidate externs in asm/proto.h
 - sysfs/sysdev fixes for apic/nmi (Bryan O'Sullivan)
 - Fix /proc/kcore access
 - Add real kern_addr_valid (used for above).
 - Support consistent dma_mask in IOMMU
 - Fix double print of AMD for CPU model.
 - Remove unused wakeup.S file.
 - Remove obsolete CONFIG_SIMNOW ifdef.
 - Support ptrace access for 32bit vsyscalls.
 - Fix warnings in 32bit boot code compilation.

Handle both unsigned int and unsigned long in rtc_read. This helps
when running 32bit userland under an 64bit kernel.

1) More reasonable ip_rt_gc_min_interval default
2) Trim less valuable entries in hash chain during
   rt_intern_hash when such chains grow too long.

into nuts.ninka.net:/home/davem/src/BK/net-2.5

1) We export __check_region, so making it __deprecated gives a spurious
   warning in kernel/ksyms.c.
2) Other warnings refer to __check_region rather than check_region,
   which has confused some people.

Make check_region an inline, not a macro, and deprecate *that*.

A number of small ColdFire serial driver fixups:
 - use correct irq handler return type (irqreturn_t)
 - add support for mark and space parity
 - some casting to keep types clean (and remove compile warnings)
 - fix missing ";" after local tty_driver struct definition

We no longer use sub-architecture speicific interrupt setups
in the m68knommu branch. Remove obsolete call to 68328 irq
init.

Make the ROMfs copy in the startup code for Motorola/M5206eLITE board
conditional on actually using a ROMfs setup.

Minor board name change in m68knommu setup,
"Dragon Engine" -> "DragonEngine".

The NCP ioctls are declared unconditionally in compat_ioctl now, which needs this
include to still compile on x86-64.

The us->ns conversion must be in the "tv" if branch of settimeofday,
not in the "tz" if.

Also make it compile for x86-64 again. The 32bit emulation was forgotten
in the conversion.

This moves the initialization of the struct scsi_device fields
use_10_for_ms and use_10_for_rw into a central place.  This allows the
host's slave_configure() function to change them (with effect).  This
also collapses two identical sections of code into a single one.

This is needed by usb-storage, so we can resolve some Babble problems,
some device-crashing problems, and remove a great deal of troublesome
mode-sense-translation code.

This update covers a lot of changes to arch/parisc and parisc-specific
drivers.

 - irq_return_t changes
 - more work on the module loader (James Bottomley)
 - rewrite of led.c by Helge Deller
 - many miscellaneous updates

At least gcc 3.3 complains about this incorrect token pasting thing in
the ASSERT macro of drivers/net/irda/ma600.c

into home.transmeta.com:/home/torvalds/v2.5/linux

Although no such oops has been reported, removing a socket driver
while a file under /sysfs/class/pcmcia_socket/pcmcia_socket* is
held open by user space could potentially cause an oops.

Plug this by preventing pcmcia_unregister_socket from returning
until all references by sysfs to the pcmcia socket have been dropped.

into flint.arm.linux.org.uk:/usr/src/linux-bk-2.5/linux-2.5-pcmcia

Patch from Daniel Ritz

rmmod yenta produces the following oops:
Unable to handle kernel paging request at virtual address d084781e
EIP is at yenta_config_init+0x18f/0x1e0 [yenta]
Process pccardd (pid: 2618, threadinfo=c3236000 task=c988ae60)

Update sa11xx_core.c for Dominik's previous patch.

Remove the inquire_socket callback by moving the (static) capability
information to the top-level of struct pcmcia_socket.

Move the creation of /proc/pccard to ds.c so that ds.c is the only
file that needs to include linux/proc_fs.h any longer.

Remove the proc_setup callback. The drivers can use CLASS_DEVICE_ATTR
instead. Example: i82365.c.

Declare the parameter array as an array, rather than a single entry.

This doesn't matter for code generation, but may be less likely to cause
problems down the line, since we're telling gcc more about the real
situation.

Thanks to Jan Hubicka who suggested this fix.

The problem seems to be that gcc generates a 32byte alignment for static
objects > 32bytes.  This causes gas to set a high alignment on the
section, which causes the uneven (not multiple of sizeof(struct
kernel_param)) section size.  The pointer division with a base not being
a multiple of sizeof(*ptr) then causes the invalid result.

This just forces a small alignment, which makes the section end come out
with the correct alignment.

The only mystery left is why ld chose a 16 byte padding instead of
32byte.

into nuts.ninka.net:/home/davem/src/BK/net-2.5

This adds the missing arch/sh/tools directory, which includes mach-type
generation scripts for building include/asm-sh/machtypes.h.

drivers/hotplug/Kconfig moved to drivers/pci/hotplug/Kconfig.

This updates arch/sh/Kconfig respectively.