Use generic_io_base to point out the pci io window, and make sure the
highest port address used is SH7751_PCI_IO_SIZE - 1.

This patch fixes pci io port access for the r2d boards - CONFIG_8139TOO_PIO
now works as expected. So does the alsa driver for CMI8738.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Acked-by: Katsuya MATSUBARA <matsu@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This patch is a fix to make sure readsN/writesN are used over insN/outsN for
ioreadN_rep/iowriteN_rep.

The current state of the sh io code is that mmio operations like readN/writeN
and ioreadN/iowriteN are unaffected by the value of generic_io_base. This is
different fom port based io like inN/outN which gets adjusted using the value
in generic_io_base.

Without this patch ioreadN_rep/iowriteN_rep get their addresses adjusted.
The address for mmio access is adjusted using generic_io_base. This is wrong.
The ata core code currently crashes if generic_io_base is set.

This patch changes ioreadN_rep/iowriteN_rep to follow the same rules as the
rest of the mmio operations, ie don't adjust using generic_io_base.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Acked-by: Katsuya MATSUBARA <matsu@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This patch makes sure ctrl_inN/outN are used instead of inN/outN for on chip
pci registers. Without this patch addresses may be adjusted using the value
in generic_io_base. This patch makes it possible to set generic_io_base and
have pci without reading and writing all over the place.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Acked-by: Katsuya MATSUBARA <matsu@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

sh64 doesn't provide __uncached_start, so don't reference it
unconditionally.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

The SH-5 build currently fails when trying to build the i8042 code due
to the missing IRQ definitions. These are provided in asm/cpu/irq.h, so
just include that there to get it building again.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

asm/hardware.h doesn't exist any more, and the definitions sh-sci.h
depended on are provided through asm/cpu/addrspace.h these days.
Kill off the bogus include.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

A number of cleanups to get the SH-5 cache management code in line with
the rest of the SH backend.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

maple_devinfo->connector_direction had a typo, fix it up..
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

linux/swap.h really wants to include linux/pagemap.h in order to satisfy
the page_cache_release()/release_pages() definition requirements when
CONFIG_SWAP=n. Unfortunately the code in question contains:

	/* only sparc can not include linux/pagemap.h in this file
	 * so leave page_cache_release and release_pages undeclared... */
	#define free_page_and_swap_cache(page) \
		page_cache_release(page)
	#define free_pages_and_swap_cache(pages, nr) \
		release_pages((pages), (nr), 0);

so it looks like we're stuck with doing it in asm/tlb.h instead, as
others already do (ARM, CRIS, etc.). Grumble.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This patch removes defunct. led support functions from hp6xx.h since they are now
added in a proper driver (see commit below). Also adds tabs instead of spaces before comments.

*commit d39a7a63Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Improve device detection for maple through longer delay

Experience suggests that a much longer delay in setting up the Maple bus
on the Dreamcast leads to better hardware detection.
Signed-off-by: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Previously this took an explicit range, update this to use the same
behaviour as the rest of the SH parts where we simply flush out a line
from the start address.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This needs a PAGE_KERNEL_NOCACHE definition, as provided by pgtable_32.h.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Applies the fix from 5b67954e to
pgtable_64.h.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

All SH-5 machines are little endian.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This patch adds sh7366 cpu supports. Just the most basic things like interrupt
controller, clocks and serial port are included at this point.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This patch removes the maskreg irq code since it is not in use anymore.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This patch makes the 32-bit ptrace code compile again.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This patch converts the highlander CF device from good old machvec readb/writeb
to the new shiny trapped io.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This patch converts the CF device on r2d boards from machvec readb/writeb
to trapped io.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

The idea is that we want to get rid of the in/out/readb/writeb callbacks from
the machvec and replace that with simple inline read and write operations to
memory. Fast and simple for most hardware devices (think pci).

Some devices require special treatment though - like 16-bit only CF devices -
so we need to have some method to hook in callbacks.

This patch makes it possible to add a per-device trap generating filter. This
way we can get maximum performance of sane hardware - which doesn't need this
filter - and crappy hardware works but gets punished by a performance hit.

V2 changes things around a bit and replaces io access callbacks with a
simple minimum_bus_width value. In the future we can add stride as well.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Update the defconfigs for r2d-plus and r2d-1 since we now have new drivers
for sm501 usb, spi-over-sci and epson r9701 rtc in mainline.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This patch converts the unaligned access handling code to use opcode_t
instead of u16. While at it, enable unaligned access handling for sh2a.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This patch adds byte support to the sign extension code. Unaligned access
traps should never be generated on 8-bit io operations, but we will use this
code for trapped io and we do need byte support there.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This patch changes copy_from_user() and copy_to_user() from macros
into static inline functions. This way we can use them as function
pointers. Also unify the 64 bit and 32 bit versions.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

move update_process_times() out from under xtime_lock.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This patch adds basic support for the Migo-R board.

Only simple stuff provided by the cpu specific sh7722 code is in place now,
like serial console port, timers and usb gadget. There is also partial support
for the smc91c111 ethernet controller - unfortunately some driver header file
also needs patching (not included here) to make the driver get IRQ sense
information from the platform data.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This patch removes the now unneeded registration check variable from
struct maple_device. (This patch assumes the include/linux/maple.h file
has already been patched for whitespace errors by
http://lkml.org/lkml/2008/2/6/327)
Signed-off-by: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Replacement second-in-series patch:

This patch fixes up memory leaks and, by delaying initialisation, makes
device detection more robust.

It also makes clearer the difference between struct maple_device and
struct device, as well as cleaning up the interrupt request code
(without changing its function in any way).

Also now removes redundant registration checking.
Signed-off-by: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This patch is fundamentally about fixing up the whitespace problems
introduced by my previous patch (that brought the code into mainline). A
second patch will follow that will fix memory leaks. The two need to be
applied sequentially.
Signed-off-by: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Break out the sign extension code since it's used in multiple places.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>