- 29 Oct, 2010 40 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6: eCryptfs: Print mount_auth_tok_only param in ecryptfs_show_options ecryptfs: added ecryptfs_mount_auth_tok_only mount parameter ecryptfs: checking return code of ecryptfs_find_auth_tok_for_sig() ecryptfs: release keys loaded in ecryptfs_keyring_auth_tok_for_sig() eCryptfs: Clear LOOKUP_OPEN flag when creating lower file ecryptfs: call vfs_setxattr() in ecryptfs_setxattr()
-
Valdis.Kletnieks@vt.edu authored
Product codenames are OK, but once an actual product name is available, it should be referenced as well. http://ark.intel.com/chipset.aspx?familyID=52499Signed-off-by:
Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdbLinus Torvalds authored
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb: kgdb,ppc: Individual register get/set for ppc kgdbts: prevent re-entry to kgdbts before it unregisters debug_core,x86,blackfin: Clean up hw debug disable API kdb: Fix early debugging crash regression kgdb,arm: fix register dump kdb: fix per_cpu command to remove supress mask kdb: Add kdb kernel module sample
-
git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6Linus Torvalds authored
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6: parisc-agp: fix missing slab.h include
-
Dongdong Deng authored
commit 534af108(kgdb,kdb: individual register set and and get API) introduce dbg_get_reg/dbg_set_reg API for individual register get and set. This patch implement those APIs for ppc. Signed-off-by:
Dongdong Deng <dongdong.deng@windriver.com> Signed-off-by:
Jason Wessel <jason.wessel@windriver.com>
-
Dongdong Deng authored
The "kgdb_connected" variable of debug_core just indicates whether or not kgdbts is connected to the debug_core. It does not completely prevent a script from trying invoke kgdbts again and possibly crashing the system (see Call Trace below). The configured variable in kgtbts can be used instead of kgdb_connected instead of kgdb_connected. The cleanup_kgdbts() can also be removed because there is no possible way to build kgdbts as a kernel module that you could unload with rmmod. Call Trace: ----------------------------------------------------------------- root:/$ echo kgdbts=V1S1000 > /sys/module/kgdbts/parameters/kgdbts kgdb: Unregistered I/O driver kgdbts, debugger disabled. ------------[ cut here ]------------ WARNING: at kernel/debug/debug_core.c:1002 kgdb_unregister_io_module+0xec/0x100() Hardware name: Moon Creek platform Modules linked in: Pid: 664, comm: sh Not tainted 2.6.34.1-WR4.0.0.0_standard #58 Call Trace: [<c103b1ed>] warn_slowpath_common+0x6d/0xa0 [<c1079fdc>] ? kgdb_unregister_io_module+0xec/0x100 [<c1079fdc>] ? kgdb_unregister_io_module+0xec/0x100 [<c10544e0>] ? param_attr_store+0x0/0x20 [<c103b235>] warn_slowpath_null+0x15/0x20 [<c1079fdc>] kgdb_unregister_io_module+0xec/0x100 [<c124e4ea>] cleanup_kgdbts+0x1a/0x20 [<c124eced>] param_set_kgdbts_var+0x6d/0xb0 [<c124ec80>] ? param_set_kgdbts_var+0x0/0xb0 [<c10544f7>] param_attr_store+0x17/0x20 [<c105457c>] module_attr_store+0x2c/0x40 [<c111fe84>] sysfs_write_file+0x94/0xf0 [<c10d42f6>] vfs_write+0x96/0x130 [<c111fdf0>] ? sysfs_write_file+0x0/0xf0 [<c10d44d6>] sys_write+0x46/0xd0 [<c13bf329>] system_call_done+0x0/0x4 ---[ end trace 4eb028c6ee43154c ]--- kgdb: Unregistered I/O driver kgdbts, debugger disabled. ----------------------------------------------------------------- [jason.wessel@windriver.com: remove cleanup_kgdbts() ] Signed-off-by:
-
Dongdong Deng authored
The kgdb_disable_hw_debug() was an architecture specific function for disabling all hardware breakpoints on a per cpu basis when entering the debug core. This patch will remove the weak function kdbg_disable_hw_debug() and change it into a call back which lives with the rest of hw breakpoint call backs in struct kgdb_arch. Signed-off-by:
-
Jason Wessel authored
The kdb_current legally be equal to NULL in the early boot of the x86 arch. The problem pcan be observed by booting with the kernel arguments: earlyprintk=vga ekgdboc=kbd kgdbwait The kdb shell will oops on entry and recursively fault because it cannot get past the final stage of shell initialization. Signed-off-by: -
Rabin Vincent authored
DBG_MAX_REG_NUM incorrectly had the number of indices in the GDB regs array rather than the number of registers, leading to an oops when the "rd" command is used in KDB. Cc: stable@kernel.org Signed-off-by:
Rabin Vincent <rabin@rab.in> Signed-off-by:
-
Jason Wessel authored
Rusty pointed out that the per_cpu command uses up lots of space on the stack and the cpu supress mask is probably not needed. This patch removes the need for the supress mask as well as fixing up the following problems with the kdb per_cpu command: * The per_cpu command should allow an address as an argument * When you have more data than can be displayed on one screen allow the user to break out of the print loop. Reported-by:Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Jason Wessel authored
Add an example of how to add a dynamic kdb shell command via a kernel module. Signed-off-by: -
git://git.linux-mips.org/pub/scm/upstream-linusLinus Torvalds authored
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (46 commits) ftrace/MIPS: Enable C Version of recordmcount ftrace/MIPS: Add module support for C version of recordmcount ftrace/MIPS: Add MIPS64 support for C version of recordmcount MIPS: Make TASK_SIZE reflect proper size for both 32 and 64 bit processes. MIPS: Allow UserLocal on MIPS_R1 processors MIPS: Honor L2 bypass bit MIPS: Add BMIPS CP0 register definitions MIPS: Add BMIPS processor types to Kconfig MIPS: Decouple BMIPS CPU support from bcm47xx/bcm63xx SoC code MIPS: Add support for hardware performance events (mipsxx) MIPS: Perf-events: Add callchain support MIPS: add support for hardware performance events (skeleton) MIPS: add support for software performance events MIPS: define local_xchg from xchg_local to atomic_long_xchg MIPS: AR7: Add support for Titan (TNETV10xx) SoC variant MIPS: AR7: Initialize GPIO earlier MIPS: Add platform device and Kconfig for Octeon USB EHCI / OHCI USB: Add EHCI and OHCH glue for OCTEON II SOCs. MIPS: Octeon: Add register definitions for EHCI / OHCI USB glue logic. MIPS: Octeon: Apply CN63XXP1 errata workarounds. ...
-
Wu Zhangjin authored
Selects HAVE_C_RECORDMCOUNT to use the C version of the recordmcount intead of the old Perl Version of recordmcount. Signed-off-by:
Wu Zhangjin <wuzhangjin@gmail.com> LKML-Reference: <bb99009a9ac79d3f55a8c8bf1c8bd2bc0e1f160e.1288176026.git.wuzhangjin@gmail.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Wu Zhangjin authored
Since MIPS modules' address space differs from the core kernel space, to access the _mcount in the core kernel, the kernel functions in modules must use long call (-mlong-calls): load the _mcount address into one register and jump to the address stored by the register: c: 3c030000 lui v1,0x0 <--------> b label c: R_MIPS_HI16 _mcount c: R_MIPS_NONE *ABS* c: R_MIPS_NONE *ABS* 10: 64630000 daddiu v1,v1,0 10: R_MIPS_LO16 _mcount 10: R_MIPS_NONE *ABS* 10: R_MIPS_NONE *ABS* 14: 03e0082d move at,ra 18: 0060f809 jalr v1 label: In the old Perl version of recordmcount, we only need to record the position of the 1st R_MIPS_HI16 type of _mcount, and later, in ftrace_make_nop(), replace the instruction in this position by a "b label" and in ftrace_make_call(), replace it back. But, the default C version of recordmcount records all of the _mcount symbols, so, we must filter the 2nd _mcount like the Perl version of recordmcount does. The C version of recordmcount copes with the symbols before they are linked, So It doesn't know the type of the symbols and therefore can not filter the symbols as the Perl version of recordmcount does. But as we can see above, the 2nd _mcount symbols of the long call alawys follows the 1st _mcount symbol of the same long call, which means the offset from the 1st to the 2nd is fixed, it is 0x10-0xc = 4 here, 4 is the length of the 1st load instruciton, for MIPS has fixed length of instructions, this offset is always 4. And as we know, the _mcount is inserted into the entry of every kernel function, the offset between the other _mcount's is expected to be always bigger than 4. So, to filter the 2ns _mcount symbol of the long call, we can simply check the offset between two _mcount symbols, If it is 4, then, filter the 2nd _mcount symbol. To avoid touching too much code, an 'empty' function fn_is_fake_mcount() is added for all of the archs, and the specific archs can override it via chaning the function pointer: is_fake_mcount in do_file() with the e_machine. e.g. This patch adds MIPS_is_fake_mcount() to override the default fn_is_fake_mcount() pointed by is_fake_mcount. This fn_is_fake_mcount() checks if the _mcount symbol is fake, e.g. the 2nd _mcount symbol of the long call is fake, for there are 2 _mcount symbols mapped to one real mcount call, so, one of them is fake and must be filtered. This fn_is_fake_mcount() is called in sift_rel_mcount() after finding the _mcount symbols and before adding the _mcount symbol into mrelp, so, it can prevent the fake mcount symbol going into the last __mcount_loc table. Signed-off-by: -
John Reiser authored
MIPS64 has 'weird' Elf64_Rel.r_info[1,2], which must be used instead of the generic Elf64_Rel.r_info, otherwise, the C version of recordmcount will not work for "segmentation fault". Usage of "union mips_r_info" and the functions MIPS64_r_sym() and MIPS64_r_info() written by Maciej W. Rozycki <macro@linux-mips.org> ---- [1] http://techpubs.sgi.com/library/manuals/4000/007-4658-001/pdf/007-4658-001.pdf [2] arch/mips/include/asm/module.h Tested-by:
John Reiser <jreiser@BitWagon.com> Signed-off-by:
Maciej W. Rozycki <macro@linux-mips.org> LKML-Reference: <AANLkTinwXjLAYACUfhLYaocHD_vBbiErLN3NjwN8JqSy@mail.gmail.com> LKML-Reference: <910dc2d5ae1ed042df4f96815fe4a433078d1c2a.1288176026.git.wuzhangjin@gmail.com> Signed-off-by:
-
David Daney authored
The TASK_SIZE macro should reflect the size of a user process virtual address space. Previously for 64-bit kernels, this was not the case. The immediate cause of pain was in hugetlbfs/inode.c:hugetlb_get_unmapped_area() where 32-bit processes trying to mmap a huge page would be served a page with an address outside of the 32-bit address range. But there are other uses of TASK_SIZE in the kernel as well that would like an accurate value. The new definition is nice because it now makes TASK_SIZE and TASK_SIZE_OF() yield the same value for any given process. For 32-bit kernels there should be no change, although I did factor out some code in asm/processor.h that became identical for the 32-bit and 64-bit cases. __UA_LIMIT is now set to ~((1 << SEGBITS) - 1) for 64-bit kernels. This should eliminate the possibility of getting a AddressErrorException in the kernel for addresses that pass the access_ok() test. With the patch applied, I can still run o32, n32 and n64 processes, and have an o32 shell fork/exec both n32 and n64 processes. Signed-off-by:
David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1701/
-
Kevin Cernekee authored
Some MIPS32R1 processors implement UserLocal (RDHWR $29) to accelerate programs that make extensive use of thread-local storage. Therefore, setting up the HWRENA register should not depend on cpu_has_mips_r2. Signed-off-by:Kevin Cernekee <cernekee@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org
-
Kevin Cernekee authored
On many of the newer MIPS32 cores, CP0 CONFIG2 bit 12 (L2B) indicates that the L2 cache is disabled and therefore Linux should not attempt to use it. [Ralf: Moved the code added by Kevin's original patch into a separate function that can easily be replaced for platforms that need more a different probe.] Signed-off-by:
-
Kevin Cernekee authored
Signed-off-by:
Florian Fainelli <ffainelli@freebox.fr> Patchwork: https://patchwork.linux-mips.org/patch/1708/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org
-
Kevin Cernekee authored
[v2: add "VIPER" marketing name for BMIPS4350] Add processor feature definitions for BMIPS3300, BMIPS4350, BMIPS4380, and BMIPS5000. Signed-off-by:
-
Kevin Cernekee authored
BMIPS processor cores are used in 50+ different chipsets spread across 5+ product lines. In many cases the chipsets do not share the same peripheral register layouts, the same register blocks, the same interrupt controllers, the same memory maps, or much of anything else. But, across radically different SoCs that share nothing more than the same BMIPS CPU, a few things are still mostly constant: SMP operations Access to performance counters DMA cache coherency quirks Cache and memory bus configuration So, it makes sense to treat each BMIPS processor type as a generic "building block," rather than tying it to a specific SoC. This makes it easier to support a large number of BMIPS-based chipsets without unnecessary duplication of code, and provides the infrastructure needed to support BMIPS-proprietary features. Signed-off-by:
-
Deng-Cheng Zhu authored
This patch adds the mipsxx Perf-events support based on the skeleton. Generic hardware events and cache events are now fully implemented for the 24K/34K/74K/1004K cores. To support other cores in mipsxx (such as R10000/SB1), the generic hardware event tables and cache event tables need to be filled out. To support other CPUs which have different PMU than mipsxx, such as RM9000 and LOONGSON2, the additional files perf_event_$cpu.c need to be created. Raw event is an important part of Perf-events. It helps the user collect performance data for events that are not listed as the generic hardware events and cache events but ARE supported by the CPU's PMU. This patch also adds this feature for mipsxx 24K/34K/74K/1004K. For how to use it, please refer to processor core software user's manual and the comments for mipsxx_pmu_map_raw_event() for more details. Please note that this is a "precise" implementation, which means the kernel will check whether the requested raw events are supported by this CPU and which hardware counters can be assigned for them. To test the functionality of Perf-event, you may want to compile the tool "perf" for your MIPS platform. You can refer to the following URL: http://www.linux-mips.org/archives/linux-mips/2010-10/msg00126.html You also need to customize the CFLAGS and LDFLAGS in tools/perf/Makefile for your libs, includes, etc. In case you encounter the boot failure in SMVP kernel on multi-threading CPUs, you may take a look at: http://www.linux-mips.org/git?p=linux-mti.git;a=commitdiff;h=5460815027d802697b879644c74f0e8365254020Signed-off-by:
Deng-Cheng Zhu <dengcheng.zhu@gmail.com> To: linux-mips@linux-mips.org Cc: a.p.zijlstra@chello.nl Cc: paulus@samba.org Cc: mingo@elte.hu Cc: acme@redhat.com Cc: jamie.iles@picochip.com Cc: ddaney@caviumnetworks.com Cc: matt@console-pimps.org Patchwork: https://patchwork.linux-mips.org/patch/1689/Signed-off-by:
-
Deng-Cheng Zhu authored
Adds callchain support for MIPS Perf-events. For more info on this feature, please refer to tools/perf/Documentation/perf-report.txt and tools/perf/design.txt. Currently userspace callchain data is not recorded, because we do not have a safe way to do this. Signed-off-by:
-
Deng-Cheng Zhu authored
This patch provides the skeleton of the HW perf event support. To enable this feature, we can not choose the SMTC kernel; Oprofile should be disabled; kernel performance events be selected. Then we can enable it in Kernel type menu. Oprofile for MIPS platforms initializes irq at arch init time. Currently we do not change this logic to allow PMU reservation. If a platform has EIC, we can use the irq base and perf counter irq offset defines for the interrupt controller in specific init_hw_perf_events(). Based on this skeleton patch, the 3 different kinds of MIPS PMU, namely, mipsxx/loongson2/rm9000, can be supported by adding corresponding lower level C files at the bottom. The suggested names of these files are perf_event_mipsxx.c/perf_event_loongson2.c/perf_event_rm9000.c. So, for example, we can do this by adding "#include perf_event_mipsxx.c" at the bottom of perf_event.c. In addition, PMUs with 64bit counters are also considered in this patch. Signed-off-by:
-
Deng-Cheng Zhu authored
Software events are required as part of the measurable stuff by the Linux performance counter subsystem. Here is the list of events added by this patch: PERF_COUNT_SW_PAGE_FAULTS PERF_COUNT_SW_PAGE_FAULTS_MIN PERF_COUNT_SW_PAGE_FAULTS_MAJ PERF_COUNT_SW_ALIGNMENT_FAULTS PERF_COUNT_SW_EMULATION_FAULTS Signed-off-by:
Matt Fleming <matt@console-pimps.org> Patchwork: https://patchwork.linux-mips.org/patch/1686/Signed-off-by:
-
Deng-Cheng Zhu authored
Perf-events is now using local_t helper functions internally. There is a use of local_xchg(). On MIPS, this is defined to xchg_local() which is missing in asm/system.h. This patch re-defines local_xchg() in asm/local.h to atomic_long_xchg(). Then Perf-events can pass the build. Signed-off-by:
-
Florian Fainelli authored
Add support for Titan TNETV1050,1055,1056,1060 variants. This SoC is almost completely identical to AR7 except on a few points: - a second bank of gpios is available - vlynq0 on titan is vlynq1 on ar7 - different PHY addresses for cpmac0 This SoC can be found on commercial products like the Linksys WRTP54G Original patch by Xin with improvments by Florian. Signed-off-by:
Xin Zhen <xlonestar2000@aim.com> Signed-off-by:
Florian Fainelli <florian@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/1563/Signed-off-by:
-
Florian Fainelli authored
In order to detect the Titan variant, we must initialize GPIOs earlier since detection relies on some GPIO values to be set. Signed-off-by:
-
David Daney authored
Declare that OCTEON reference boards have both OHCI and EHCI. Add platform devices for the corresponding hardware. Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by:
-
David Daney authored
The OCTEON II SOC has USB EHCI and OHCI controllers connected directly to the internal I/O bus. This patch adds the necessary 'glue' logic to allow ehci-hcd and ohci-hcd drivers to work on OCTEON II. The OCTEON normally runs big-endian, and the ehci/ohci internal registers have host endianness, so we need to select USB_EHCI_BIG_ENDIAN_MMIO. The ehci and ohci blocks share a common clocking and PHY infrastructure. Initialization of the host controller and PHY clocks is common between the two and is factored out into the octeon2-common.c file. Setting of USB_ARCH_HAS_OHCI and USB_ARCH_HAS_EHCI is done in arch/mips/Kconfig in a following patch. Signed-off-by:
-
David Daney authored
The EHCI and OHCI blocks connection to the I/O bus is controlled by these registers. Signed-off-by:
-
David Daney authored
The CN63XXP1 needs a couple of workarounds to ensure memory is not written in unexpected ways. All PREF with hints in the range 0-4,6-24 are replaced with PREF 28. We pass a flag to the assembler to cover compiler generated code, and patch uasm for the dynamically generated code. The write buffer threshold is reduced to 4. Signed-off-by:
-
David Daney authored
The creation of the I/O clock domain requires some adjustments. Since the watchdog counters are clocked by the I/O clock, use its rate for timing calculations. Signed-off-by:
Wim Van Sebroeck <wim@iguana.be> Signed-off-by:
-
David Daney authored
The creation of the I/O clock domain requires some adjustments. Since the CF bus timing logic is clocked by the I/O clock, use its rate for delay calculations. Signed-off-by:
Jeff Garzik <jgarzik@redhat.com> Signed-off-by:
-
David Daney authored
The I2C and UARTS are clocked by the I/O clock, use its rate for these devices. Signed-off-by:
-
David Daney authored
Starting with cn63xx Octeon I/O blocks are clocked at a different rate than the CPU. Add a new function octeon_get_io_clock_rate() that yields the I/O clock rate. Also rearrange octeon_get_clock_rate() to get the value from the saved sysinfo structure. Signed-off-by:
-
David Daney authored
We can run with any simulator clock rate. Get rid of the code overriding it to 6MHz. Signed-off-by:
-
David Daney authored
The per-CPU clocks are synchronized from IPD_CLK_COUNT, on cn63XX it must be scaled by the clock frequency ratio. Signed-off-by:
-
David Daney authored
Signed-off-by:
-
David Daney authored
The OCTEON II ISA extends the original OCTEON ISA, so give it its own __elf_platform string so optimized libraries can be selected in userspace. Signed-off-by:
-
