- 04 Sep, 2014 5 commits
-
-
Catherine Sullivan authored
Now that fw has implemented dual speed module support, we can add ours. Also, add the phy type for 1G LR/SR and set its media type to fiber. Lastly, instead of a WARN_ON if the phy type is not recognized just print a warning. Change-ID: I2e5227d4a8c2907b0ed423038e5dbce774e466b0 Signed-off-by:
Catherine Sullivan <catherine.sullivan@intel.com> Tested-by:
Jim Young <jamesx.m.young@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Rick Jones authored
It would appear the mlx4_en driver was still making a call to dev_kfree_skb_any() where dev_consume_skb_any() would be more appropriate. This should make dropped packet profiling/tracking easier/better over a NIC driven by mlx4_en. Signed-off-by:
Rick Jones <rick.jones2@hp.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ying Xue authored
Although rhashtable library allows user to specify a quiet big size for user's created hash table, the table may be shrunk to a very small size - HASH_MIN_SIZE(4) after object is removed from the table at the first time. Subsequently, even if the total amount of objects saved in the table is quite lower than user's initial setting in a long time, the hash table size is still dynamically adjusted by rhashtable_shrink() or rhashtable_expand() each time object is inserted or removed from the table. However, as synchronize_rcu() has to be called when table is shrunk or expanded by the two functions, we should permit user to set the minimum table size through configuring the minimum number of shifts according to user specific requirement, avoiding these expensive actions of shrinking or expanding because of calling synchronize_rcu(). Signed-off-by:
Ying Xue <ying.xue@windriver.com> Acked-by:
Thomas Graf <tgraf@suug.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jesper Dangaard Brouer authored
In commit 50cbe9ab ("net: Validate xmit SKBs right when we pull them out of the qdisc") the validation code was moved out of dev_hard_start_xmit and into dequeue_skb. However this overlooked the fact that we do not always enqueue the skb onto a qdisc. First situation is if qdisc have flag TCQ_F_CAN_BYPASS and qdisc is empty. Second situation is if there is no qdisc on the device, which is a common case for software devices. Originally spotted and inital patch by Alexander Duyck. As a result Alex was seeing issues trying to connect to a vhost_net interface after commit 50cbe9ab was applied. Added a call to validate_xmit_skb() in __dev_xmit_skb(), in the code path for qdiscs with TCQ_F_CAN_BYPASS flag, and in __dev_queue_xmit() when no qdisc. Also handle the error situation where dev_hard_start_xmit() could return a skb list, and does not return dev_xmit_complete(rc) and falls through to the kfree_skb(), in that situation it should call kfree_skb_list(). Fixes: 50cbe9ab ("net: Validate xmit SKBs right when we pull them out of the qdisc") Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jesper Dangaard Brouer authored
More minor fixes to merge commit 53fda7f7 (Merge branch 'xmit_list') that allows us to work with a list of SKBs. Fixing exit cases in qdisc_reset() and qdisc_destroy(), where a leftover requeued SKB (qdisc->gso_skb) can have the potential of being a skb list, thus use kfree_skb_list(). This is a followup to commit 10770bc2 ("qdisc: adjustments for API allowing skb list xmits"). Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 02 Sep, 2014 35 commits
-
-
Jesper Dangaard Brouer authored
Minor adjustments for merge commit 53fda7f7 (Merge branch 'xmit_list') that allows us to work with a list of SKBs. Update code doc to function sch_direct_xmit(). In handle_dev_cpu_collision() use kfree_skb_list() in error handling. Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jingoo Han authored
Remove unused 'dev' variable from arc_emac_remove(), since it's not being used any more. Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David Wood authored
Remove unnecessary double parenthesis around if statement. Signed-off-by:
David Wood <devel@dtwood.uk> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Nicolas Dichtel says: ==================== rtnl: send notification in do_setlink() This series ensures to call the notifier chain and to send a netlink message when a change is done by do_setlink(). The three first patches mainly prepare the last one, which do this change. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nicolas Dichtel authored
Depending on which parameters were updated, the changes were not propagated via the notifier chain and netlink. The new flag has been set only when the change did not cause a call to the notifier chain and/or to the netlink notification functions. Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nicolas Dichtel authored
There is no functional changes with this commit, it only prepares the next one. Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nicolas Dichtel authored
The only effect of this patch is to print a warning if IFLA_LINKMODE is updated and a following change fails. Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nicolas Dichtel authored
The only effect of this patch is to print a warning if IFLA_TXQLEN is updated and a following change fails. Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Sathya Perla says: ==================== be2net: patch set v2 changes: add a new line after variable declaration in patch 12. *** Patch 1 adds a few new log messages to help debugging in failure cases. Patch 2 uses new macros for parsing RX/TX completions and TX wrbs to help shorten the lines. Patch 3 adds a description for the RX counter rx_input_fifo_overflow_drop. Patch 4 adds TX completion error statistics reporting via ethtool. Patch 5 adds a dma_mapping_error counter and its reporting via ethtool. Patch 6 fixes up log messages in the Lancer FW download path. Patch 7 replaces gotos with direct return statements. Patch 8 cleans up be_change_mtu() code by using a new macro BE_MAX_MTU Patch 9 makes be_cmd_get_regs() routine to return an integer status similar to other FW cmd routines in be_cmds.c Patch 10 gets rid of TX budget as enforcing a budget on TX completion processing in NAPI is neither suggested nor it provides a performance benefit. Patch 11 defines and uses a new macro for_all_tx_queues_on_eq() similar to the RX processing code. Patch 12 queries max_tx_qs from the FW for BE3 super-nic profiles. For those profiles, the driver cannot assume a constant BE3_MAX_TX_QS value, as the value may change for each function. Please consider applying this patch set to the net-next tree. Thanks! ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Suresh Reddy authored
In the BE3 super-nic profile, the max_tx_qs value can vary for each function. So the driver needs to query this value from FW instead of using the pre-defined constant BE3_MAX_TX_QS. Signed-off-by:
Suresh Reddy <Suresh.Reddy@emulex.com> Signed-off-by:
Sathya Perla <sathya.perla@emulex.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sathya Perla authored
Replace the for() loop that traverses all the TX queues on an EQ with the macro for_all_tx_queues_on_eq(). With this expalnatory name, the one line comment is not required anymore. Signed-off-by:
Sathya Perla <sathya.perla@emulex.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sathya Perla authored
Enforcing a budget on the TX completion processing in NAPI doesn't benefit performance in anyway. Just get rid of it. Signed-off-by:
Sathya Perla <sathya.perla@emulex.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vasundhara Volam authored
There are a few failure cases in be_cmd_get_regs() that ideally must return an error value. This style is used across all the routines in be_cmds.c with this routine being an exception. This patch fixes this. Signed-off-by:
Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by:
Sathya Perla <sathya.perla@emulex.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kalesh AP authored
This patch defines a new macro BE_MAX_MTU to make the code in be_change_mtu() more readable. Signed-off-by:
Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by:
Sathya Perla <sathya.perla@emulex.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kalesh AP authored
In cases where there is no extra code to handle an error, this patch replaces gotos with a direct return statement. Signed-off-by:
Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by:
Sathya Perla <sathya.perla@emulex.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kalesh AP authored
Log messages in the Lancer FW download path have issues such as: - a single message spanning multiple lines - the success message is logged even in failure cases - status codes are already logged in the FW cmd routines This patch fixes these issues. Signed-off-by:
Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by:
Sathya Perla <sathya.perla@emulex.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vasundhara Volam authored
Add a dma_mapping_error counter to count the number of packets dropped due to DMA mapping errors. Signed-off-by:
Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by:
Sathya Perla <sathya.perla@emulex.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kalesh AP authored
HW reports TX completion errors in TX completion. This patch adds these counters to ethtool statistics. Signed-off-by:
Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by:
Sathya Perla <sathya.perla@emulex.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sathya Perla authored
Signed-off-by:
Sathya Perla <sathya.perla@emulex.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sathya Perla authored
The AMAP_GET/SET_BITS() macro calls take structure name as a parameter and hence are long and span more than one line. Replace these calls with a wrapper macros for RX/Tx compls and TX wrb. This results in fewer lines and more readable code in be_main.c Signed-off-by:
Sathya Perla <sathya.perla@emulex.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sathya Perla authored
This patch adds the following log messages to help debugging failure cases: 1) log FW version number: this is useful when driver initialization fails and the FW version number cannot be queried via ethtool 2) per function resource limits for BEx chips: these values are currently being printed only for Skyhawk and Lancer 3) PCI BAR mapping failure 4) function_mode/caps queried from FW: this helps catch any FW bugs that could advertise wrong capabilities to the driver Signed-off-by:
Sathya Perla <sathya.perla@emulex.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Willem de Bruijn authored
sk->sk_error_queue is dequeued in four locations. All share the exact same logic. Deduplicate. Also collapse the two critical sections for dequeue (at the top of the recv handler) and signal (at the bottom). This moves signal generation for the next packet forward, which should be harmless. It also changes the behavior if the recv handler exits early with an error. Previously, a signal for follow-up packets on the errqueue would then not be scheduled. The new behavior, to always signal, is arguably a bug fix. For rxrpc, the change causes the same function to be called repeatedly for each queued packet (because the recv handler == sk_error_report). It is likely that all packets will fail for the same reason (e.g., memory exhaustion). This code runs without sk_lock held, so it is not safe to trust that sk->sk_err is immutable inbetween releasing q->lock and the subsequent test. Introduce int err just to avoid this potential race. Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Willem de Bruijn authored
Expand Documentation/networking/timestamping.txt with new interfaces and bytestream timestamping. Also minor cleanup of the other text. Import txtimestamp.c test of the new features. Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Tom Herbert says: ==================== net: Checksum offload changes - Part VI I am working on overhauling RX checksum offload. Goals of this effort are: - Specify what exactly it means when driver returns CHECKSUM_UNNECESSARY - Preserve CHECKSUM_COMPLETE through encapsulation layers - Don't do skb_checksum more than once per packet - Unify GRO and non-GRO csum verification as much as possible - Unify the checksum functions (checksum_init) - Simplify code What is in this seventh patch set: - Add skb->csum. This allows a device or GRO to indicate that an invalid checksum was detected. - Checksum unncessary to checksum complete conversions. With these changes, I believe that the third goal of the overhaul is now mostly achieved. In the case of no encapsulation or one layer of encapsulation, there should only be at most one skb_checksum over each packet (between GRO and normal path). In the case of two layers of encapsulation, it is still possible with the right combination of non-zero and zero UDP checksums to have >1 skb_checksum. For instance: IP>GRE(with csum)>IP>UDP(zero csum)>VXLAN>IP>UDP(non-zero csum), would likely necessiate an skb_checksum in GRO and normal path. This doesn't seem like a common scenario at all so I'm inclined to not address this now, if multiple layers of encapsulation becomes popular we can reassess. Note that checksum conversion shows a nice improvement for RX VXLAN when outer UDP checksum is enabled (12.65% CPU compared to 20.94%). This is not only from the fact that we don't need checksum calculation on the host, but also allows GRO for VXLAN in this case. Checksum conversion does not help send side (which still needs to perform a checksum on host). For that we will implement remote checksum offload in a later patch (http://tools.ietf.org/html/draft-herbert-remotecsumoffload-00). Please review carefully and test if possible, mucking with basic checksum functions is always a little precarious :-) ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tom Herbert authored
Signed-off-by:
Tom Herbert <therbert@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tom Herbert authored
Signed-off-by:
Tom Herbert <therbert@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tom Herbert authored
Call skb_checksum_try_convert and skb_gro_checksum_try_convert after checksum is found present and validated in the GRE header for normal and GRO paths respectively. In GRO path, call skb_gro_checksum_try_convert Signed-off-by:
Tom Herbert <therbert@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tom Herbert authored
Add support for doing CHECKSUM_UNNECESSARY to CHECKSUM_COMPLETE conversion in UDP tunneling path. In the normal UDP path, we call skb_checksum_try_convert after locating the UDP socket. The check is that checksum conversion is enabled for the socket (new flag in UDP socket) and that checksum field is non-zero. In the UDP GRO path, we call skb_gro_checksum_try_convert after checksum is validated and checksum field is non-zero. Since this is already in GRO we assume that checksum conversion is always wanted. Signed-off-by:
Tom Herbert <therbert@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tom Herbert authored
For normal path, added skb_checksum_try_convert which is called to attempt to convert CHECKSUM_UNNECESSARY to CHECKSUM_COMPLETE. The primary condition to allow this is that ip_summed is CHECKSUM_NONE and csum_valid is true, which will be the state after consuming a CHECKSUM_UNNECESSARY. For GRO path, added skb_gro_checksum_try_convert which is the GRO analogue of skb_checksum_try_convert. The primary condition to allow this is that NAPI_GRO_CB(skb)->csum_cnt == 0 and NAPI_GRO_CB(skb)->csum_valid is set. This implies that we have consumed all available CHECKSUM_UNNECESSARY checksums in the GRO path. Signed-off-by:
Tom Herbert <therbert@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tom Herbert authored
This flag indicates that an invalid checksum was detected in the packet. __skb_mark_checksum_bad helper function was added to set this. Checksums can be marked bad from a driver or the GRO path (the latter is implemented in this patch). csum_bad is checked in __skb_checksum_validate_complete (i.e. calling that when ip_summed == CHECKSUM_NONE). csum_bad works in conjunction with ip_summed value. In the case that ip_summed is CHECKSUM_NONE and csum_bad is set, this implies that the first (or next) checksum encountered in the packet is bad. When ip_summed is CHECKSUM_UNNECESSARY, the first checksum after the last one validated is bad. For example, if ip_summed == CHECKSUM_UNNECESSARY, csum_level == 1, and csum_bad is set-- then the third checksum in the packet is bad. In the normal path, the packet will be dropped when processing the protocol layer of the bad checksum: __skb_decr_checksum_unnecessary called twice for the good checksums changing ip_summed to CHECKSUM_NONE so that __skb_checksum_validate_complete is called to validate the third checksum and that will fail since csum_bad is set. Signed-off-by:
Tom Herbert <therbert@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
hayeswang authored
The variable "rx_buf_sz" is used by both tx and rx buffers. Replace it with "agg_buf_sz". Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
drivers/net/phy/mdio-bcm-unimac.c:195:37-38: unimac_mdio_ids is not NULL terminated at line 195 Make sure of_device_id tables are NULL terminated Generated by: scripts/coccinelle/misc/of_table.cocci Signed-off-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
net/dsa/dsa.c:624:20: sparse: symbol 'dsa_pack_type' was not declared. Should it be static? Fixes: 3e8a72d1 ("net: dsa: reduce number of protocol hooks") Signed-off-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nikolay Aleksandrov authored
This patch adds support for slave_changelink to the bonding and uses it to give the ability to change the queue_id of the enslaved devices via netlink. It sets slave_maxtype and uses bond_changelink as a prototype for bond_slave_changelink. Example/test command after the iproute2 patch: ip link set eth0 type bond_slave queue_id 10 CC: David S. Miller <davem@davemloft.net> CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Suggested-by:
Jiri Pirko <jiri@resnulli.us> Signed-off-by:
Nikolay Aleksandrov <nikolay@redhat.com> Acked-by:
Jiri Pirko <jiri@resnulli.us> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
stephen hemminger authored
Fix places where there is space before tab, long lines, and awkward if(){, double spacing etc. Add blank line after declaration/initialization. Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-