Now that all core users are converted one layer can go.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

It's safe to drop the IRQ_INPROGRESS flag between action chain walks
as we are protected by desc->lock.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Core code replacement for the ugly camel case. It contains all the
code which is shared in all handlers.

     clear status flags
     set INPROGRESS flag
     unlock
     call action chain
     note_interrupt
     lock
     clr INPROGRESS flag
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

IRQ_MASKED is set in mask_ack_irq() anyway. Remove it from
handle_edge_irq() to allow simpler ab^HHreuse of that function.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20110202212551.918484270@linutronix.de>

Handle IRQ_DISABLED consistent.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Now that everything uses the wrappers, we can remove the default
functions. None of those functions is performance critical.

That makes the IRQ_MASKED flag tracking fully consistent.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Create irq_disable/enable and use them to keep the flags consistent.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Aside of duplicated code some of the startup/shutdown sites do not
handle the MASKED/DISABLED flags and the depth field at all. Move that
to a helper function and take care of it there.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20110202212551.787481468@linutronix.de>

The if (chip->irq_shutdown) check will always evaluate to true, as we
fill in chip->irq_shutdown with default_shutdown in
irq_chip_set_defaults() if the chip does not provide its own function.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20110202212551.667607458@linutronix.de>

Soleley used in core code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

With the chip.end() function gone we might run into a situation where
a poll call runs and the real interrupt comes in, sees IRQ_INPROGRESS
and disables the line. That might be a perfect working one, which will
then be masked forever.

So mark them polled while the poll runs. When the real handler sees
IRQ_INPROGRESS it checks the poll flag and waits for the polling to
complete. Add the necessary amount of sanity checks to it to avoid
deadlocks.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

No point in running concurrent pollers which confuse each other by
setting PENDING.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

There is no point in polling disabled lines.

percpu does not make sense at all because we only poll on the cpu
we're currently running on. Also polling per_cpu interrupts is racy as
hell. The handler runs without locking so we might get a huge
surprise.

If the timer interrupt needs polling, then we wont get there anyway.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

try_one_irq() contains redundant code and lots of useless checks for
shared interrupts. Check for shared before setting IRQ_INPROGRESS and
then call handle_IRQ_event() while pending. Shorter version with the
same functionality.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

We run all handlers with interrupts disabled and expect them not to
enable them. Warn when we catch one who does.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

We cannot walk the action chain unlocked. Even if IRQ_INPROGRESS is
set an action can be removed and we follow a null pointer. It's safe
to take the lock there, because the code which removes the action will
call synchronize_irq() which waits unlocked for IRQ_INPROGRESS going
away.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Thread affinity is already set by setup_affinity().
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

While rumaging through arch code I found that there are a few
workarounds which deal with the fact that the initial affinity setting
from request_irq() copies the mask into irq_data->affinity before the
chip code is called. In the normal path we unconditionally copy the
mask when the chip code returns 0.

Copy after the code is called and add a return code
IRQ_SET_MASK_OK_NOCOPY for the chip functions, which prevents the
copy. That way we see the real mask when the chip function decided to
truncate it further as some arches do. IRQ_SET_MASK_OK is 0, which is
the current behaviour.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

If the affinity had been set by the user, then a later request_irq()
will honour that setting. But online cpus can have changed. So apply
the online mask and for this case as well.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

IRQ_NO_BALANCING is already checked in irq_can_set_affinity() above,
no need to check it again.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

There is lot of #ifdef CONFIG_GENERIC_PENDING_IRQ along with
duplicated code in the irq core. Move the #ifdeffery into one place
and cleanup the code so it's readable. No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

The irq namespace has become quite convoluted. My bad.  Clean it up
and deprecate the old functions. All new functions follow the scheme:

irq number based:
    irq_set/get/xxx/_xxx(unsigned int irq, ...)

irq_data based:
	 irq_data_set/get/xxx/_xxx(struct irq_data *d, ....)

irq_desc based:
	 irq_desc_get_xxx(struct irq_desc *desc)
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

chips behind a slow bus cannot update the chip under desc->lock, but
we miss the chip_buslock/chip_bus_sync_unlock() calls around the set
type and set wake functions.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

We face more and more the requirement to expand nr_irqs at
runtime. The reason are irq expanders which can not be detected in the
early boot stage. So we speculate nr_irqs to have enough room. Further
Xen needs extra irq numbers and we really want to avoid adding more
"detection" code into the early boot. There is no real good reason why
we need to limit nr_irqs at early boot.

Allow the allocation code to expand nr_irqs. We have already 8k extra
number space in the allocation bitmap, so lets use it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Reason: Further patches are conflicting with mainline fixes
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

With CONFIG_SHIRQ_DEBUG=y we call a newly installed interrupt handler
in request_threaded_irq().

The original implementation (commit a304e1b8) called the handler
_BEFORE_ it was installed, but that caused problems with handlers
calling disable_irq_nosync(). See commit 377bf1e4.

It's braindead in the first place to call disable_irq_nosync in shared
handlers, but ....

Moving this call after we installed the handler looks innocent, but it
is very subtle broken on SMP.

Interrupt handlers rely on the fact, that the irq core prevents
reentrancy.

Now this debug call violates that promise because we run the handler
w/o the IRQ_INPROGRESS protection - which we cannot apply here because
that would result in a possibly forever masked interrupt line.

A concurrent real hardware interrupt on a different CPU results in
handler reentrancy and can lead to complete wreckage, which was
unfortunately observed in reality and took a fricking long time to
debug.

Leave the code here for now. We want this debug feature, but that's
not easy to fix. We really should get rid of those
disable_irq_nosync() abusers and remove that function completely.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: stable@kernel.org # .28 -> .37

Lars-Peter Clausen pointed out:

   I stumbled upon this while looking through the existing archs using
   SPARSE_IRQ.  Even with SPARSE_IRQ the NR_IRQS is still the upper
   limit for the number of IRQs.

   Both PXA and MMP set NR_IRQS to IRQ_BOARD_START, with
   IRQ_BOARD_START being the number of IRQs used by the core.

   In various machine files the nr_irqs field of the ARM machine
   defintion struct is then set to "IRQ_BOARD_START + NR_BOARD_IRQS".

   As a result "nr_irqs" will greater then NR_IRQS which then again
   causes the "allocated_irqs" bitmap in the core irq code to be
   accessed beyond its size overwriting unrelated data.

The core code really misses a sanity check there.

This went unnoticed so far as by chance the compiler/linker places
data behind that bitmap which gets initialized later on those affected
platforms.

So the obvious fix would be to add a sanity check in early_irq_init()
and break all affected platforms. Though that check wants to be
backported to stable as well, which will require to fix all known
problematic platforms and probably some more yet not known ones as
well. Lots of churn.

A way simpler solution is to allocate a slightly larger bitmap and
avoid the whole churn w/o breaking anything. Add a few warnings when
an arch returns utter crap.
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@kernel.org # .37
Cc: Haojian Zhuang <haojian.zhuang@marvell.com>
Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>

* 'rtc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  RTC: Re-enable UIE timer/polling emulation
  RTC: Revert UIE emulation removal
  RTC: Release mutex in error path of rtc_alarm_irq_enable

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (37 commits)
  net: deinit automatic LIST_HEAD
  net: dont leave active on stack LIST_HEAD
  net: provide default_advmss() methods to blackhole dst_ops
  tg3: Restrict phy ioctl access
  drivers/net: Call netif_carrier_off at the end of the probe
  ixgbe: work around for DDP last buffer size
  ixgbe: fix panic due to uninitialised pointer
  e1000e: flush all writebacks before unload
  e1000e: check down flag in tasks
  isdn: hisax: Use l2headersize() instead of dup (and buggy) func.
  arp_notify: unconditionally send gratuitous ARP for NETDEV_NOTIFY_PEERS.
  cxgb4vf: Use defined Mailbox Timeout
  cxgb4vf: Quiesce Virtual Interfaces on shutdown ...
  cxgb4vf: Behave properly when CONFIG_DEBUG_FS isn't defined ...
  cxgb4vf: Check driver parameters in the right place ...
  pch_gbe: Fix the MAC Address load issue.
  iwlwifi: Delete iwl3945_good_plcp_health.
  net/can/softing: make CAN_SOFTING_CS depend on CAN_SOFTING
  netfilter: nf_iterate: fix incorrect RCU usage
  pch_gbe: Fix the issue that the receiving data is not normal.
  ...

* 'for-linus/bugfixes' of git://xenbits.xen.org/people/ianc/linux-2.6:
  xen: suspend and resume system devices when running PVHVM

* 'fixes-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: make sure MAYDAY_INITIAL_TIMEOUT is at least 2 jiffies long
  workqueue, freezer: unify spelling of 'freeze' + 'able' to 'freezable'
  workqueue: wake up a worker when a rescuer is leaving a gcwq

commit 9b5e383c (net: Introduce
unregister_netdevice_many()) left an active LIST_HEAD() in
rollback_registered(), with possible memory corruption.

Even if device is freed without touching its unreg_list (and therefore
touching the previous memory location holding LISTE_HEAD(single), better
close the bug for good, since its really subtle.

(Same fix for default_device_exit_batch() for completeness)
Reported-by: Michal Hocko <mhocko@suse.cz>
Tested-by: Michal Hocko <mhocko@suse.cz>
Reported-by: Eric W. Biderman <ebiderman@xmission.com>
Tested-by: Eric W. Biderman <ebiderman@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Ingo Molnar <mingo@elte.hu>
CC: Octavian Purdila <opurdila@ixiacom.com>
CC: stable <stable@kernel.org> [.33+]
Signed-off-by: David S. Miller <davem@davemloft.net>

Eric W. Biderman and Michal Hocko reported various memory corruptions
that we suspected to be related to a LIST head located on stack, that
was manipulated after thread left function frame (and eventually exited,
so its stack was freed and reused).

Eric Dumazet suggested the problem was probably coming from commit
44345724 (net: factorize
sync-rcu call in unregister_netdevice_many)

This patch fixes __dev_close() and dev_close() to properly deinit their
respective LIST_HEAD(single) before exiting.

References: https://lkml.org/lkml/2011/2/16/304
References: https://lkml.org/lkml/2011/2/14/223Reported-by: Michal Hocko <mhocko@suse.cz>
Tested-by: Michal Hocko <mhocko@suse.cz>
Reported-by: Eric W. Biderman <ebiderman@xmission.com>
Tested-by: Eric W. Biderman <ebiderman@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Ingo Molnar <mingo@elte.hu>
CC: Octavian Purdila <opurdila@ixiacom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 0dbaee3b (net: Abstract default ADVMSS behind an
accessor.) introduced a possible crash in tcp_connect_init(), when
dst->default_advmss() is called from dst_metric_advmss()
Reported-by: George Spelvin <linux@horizon.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When list debugging is enabled, we aim to readably show list corruption
errors, and the basic list_add/list_del operations end up having extra
debugging code in them to do some basic validation of the list entries.

However, "list_del_init()" and "list_move[_tail]()" ended up avoiding
the debug code due to how they were written. This fixes that.

So the _next_ time we have list_move() problems with stale list entries,
we'll hopefully have an easier time finding them..
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>