If force_zc is set, we should exit out with an error, not fall back to
copy mode.

Fixes: 921b6869 ("xsk: Enable sharing of dma mappings")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/1607077277-41995-1-git-send-email-zhangchangzhong@huawei.com

Modify the tx writeable condition from the queue is not full to the
number of present tx queues is less than the half of the total number
of queues. Because the tx queue not full is a very short time, this will
cause a large number of EPOLLOUT events, and cause a large number of
process wake up.

Fixes: 35fcde7f ("xsk: support for Tx")
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/508fef55188d4e1160747ead64c6dcda36735880.1606555939.git.xuanzhuo@linux.alibaba.com

datagram_poll will judge the current socket status (EPOLLIN, EPOLLOUT)
based on the traditional socket information (eg: sk_wmem_alloc), but
this does not apply to xsk. So this patch uses sock_poll_wait instead of
datagram_poll, and the mask is calculated by xsk_poll.

Fixes: c497176c ("xsk: add Rx receive functions and poll support")
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/e82f4697438cd63edbf271ebe1918db8261b7c09.1606555939.git.xuanzhuo@linux.alibaba.com

Avoid occasional test failures due to the last sample being delayed to
another ring_buffer__poll() call. Instead, drain samples completely with
ring_buffer__consume(). This is supposed to fix a rare and non-deterministic
test failure in libbpf CI.

Fixes: cb1c9ddd ("selftests/bpf: Add BPF ringbuf selftests")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201130223336.904192-2-andrii@kernel.org

Fix ring_buffer__poll() to return the number of non-discarded records
consumed, just like its documentation states. It's also consistent with
ring_buffer__consume() return. Fix up selftests with wrong expected results.

Fixes: bf99c936 ("libbpf: Add BPF ring buffer support")
Fixes: cb1c9ddd ("selftests/bpf: Add BPF ringbuf selftests")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201130223336.904192-1-andrii@kernel.org

It turns out that it does exist a path where xdp_return_buff() is
being passed an XDP buffer of type MEM_TYPE_XSK_BUFF_POOL. This path
is when AF_XDP zero-copy mode is enabled, and a buffer is redirected
to a DEVMAP with an attached XDP program that drops the buffer.

This change simply puts the handling of MEM_TYPE_XSK_BUFF_POOL back
into xdp_return_buff().

Fixes: 82c41671 ("xdp: Simplify xdp_return_{frame, frame_rx_napi, buff}")
Reported-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Link: https://lore.kernel.org/bpf/20201127171726.123627-1-bjorn.topel@gmail.com

GPIO_ACTIVE_x flags are not correct in the context of interrupt flags.
These are simple defines so they could be used in DTS but they will not
have the same meaning:
1. GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE
2. GPIO_ACTIVE_LOW  = 1 = IRQ_TYPE_EDGE_RISING

Correct the interrupt flags, assuming the author of the code wanted same
logical behavior behind the name "ACTIVE_xxx", this is:
  ACTIVE_LOW  => IRQ_TYPE_LEVEL_LOW
  ACTIVE_HIGH => IRQ_TYPE_LEVEL_HIGH

Fixes: a1a8b459 ("NFC: pn544: i2c: Add DTS Documentation")
Fixes: 6be88670 ("NFC: nxp-nci_i2c: Add I2C support to NXP NCI driver")
Fixes: e3b32922 ("dt-bindings: can: tcan4x5x: Update binding to use interrupt property")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for tcan4x5x.txt
Link: https://lore.kernel.org/r/20201026153620.89268-1-krzk@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Dany Madden says:

====================
ibmvnic: assorted bug fixes

Assorted fixes for ibmvnic originated from "[PATCH net 00/15] ibmvnic:
assorted bug fixes" sent by Lijun Pan.
====================

Link: https://lore.kernel.org/r/20201126000432.29897-1-drt@linux.ibm.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Reduce the wait time for Command Response Queue response from 30 seconds
to 20 seconds, as recommended by VIOS and Power Hypervisor teams.

Fixes: bd0b6723 ("ibmvnic: Move login and queue negotiation into ibmvnic_open")
Fixes: 53da09e9 ("ibmvnic: Add set_link_state routine for setting adapter link state")
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Reset timeout is going off right after adapter reset. This patch ensures
that timeout is scheduled if it has been 5 seconds since the last reset.
5 seconds is the default watchdog timeout.

Fixes: ed651a10 ("ibmvnic: Updated reset handling")
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

send_login() does not check for the result of ibmvnic_send_crq() of the
login request. This results in the driver needlessly retrying the login
10 times even when CRQ is no longer active. Check the return code and
give up in case of errors in sending the CRQ.

The only time we want to retry is if we get a PARITALSUCCESS response
from the partner.

Fixes: 032c5e82 ("Driver for IBM System i/p VNIC protocol")
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

If after ibmvnic sends a LOGIN it gets a FAILOVER, it is possible that
the worker thread will start reset process and free the login response
buffer before it gets a (now stale) LOGIN_RSP. The ibmvnic tasklet will
then try to access the login response buffer and crash.

Have ibmvnic track pending logins and discard any stale login responses.

Fixes: 032c5e82 ("Driver for IBM System i/p VNIC protocol")
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

If auto-priority failover is enabled, the backing device needs time
to settle if hard resetting fails for any reason. Add a delay of 60
seconds before retrying the hard-reset.

Fixes: 2770a798 ("ibmvnic: Introduce hard reset recovery")
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

In a failed reset, driver could end up in VNIC_PROBED or VNIC_CLOSED
state and cannot recover in subsequent resets, leaving it offline.
This patch restores the adapter state to reset_state, the original
state when reset was called.

Fixes: b27507bb ("net/ibmvnic: unlock rtnl_lock in reset so linkwatch_event can run")
Fixes: 2770a798 ("ibmvnic: Introduce hard reset recovery")
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

scrq->msgs could be NULL during device reset, causing Linux to crash.
So, check before memset scrq->msgs.

Fixes: c8b2ad0a ("ibmvnic: Sanitize entire SCRQ buffer on reset")
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When ibmvnic fails to reset, it breaks out of the reset loop and frees
all of the remaining resets from the workqueue. Doing so prevents the
adapter from recovering if no reset is scheduled after that. Instead,
have the driver continue to process resets on the workqueue.

Remove the no longer need free_all_rwi().

Fixes: ed651a10 ("ibmvnic: Updated reset handling")
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Inconsistent login with the vnicserver is causing the device to be
removed. This does not give the device a chance to recover from error
state. This patch schedules a FATAL reset instead to bring the adapter
up.

Fixes: 032c5e82 ("Driver for IBM System i/p VNIC protocol")
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

1) Fix insufficient validation of IPSET_ATTR_IPADDR_IPV6 reported
   by syzbot.

2) Remove spurious reports on nf_tables when lockdep gets disabled,
   from Florian Westphal.

3) Fix memleak in the error path of error path of
   ip_vs_control_net_init(), from Wang Hai.

4) Fix missing control data in flow dissector, otherwise IP address
   matching in hardware offload infra does not work.

5) Fix hardware offload match on prefix IP address when userspace
   does not send a bitwise expression to represent the prefix.

* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
  netfilter: nftables_offload: build mask based from the matching bytes
  netfilter: nftables_offload: set address type in control dissector
  ipvs: fix possible memory leak in ip_vs_control_net_init
  netfilter: nf_tables: avoid false-postive lockdep splat
  netfilter: ipset: prevent uninit-value in hash_ip6_add
====================

Link: https://lore.kernel.org/r/20201127190313.24947-1-pablo@netfilter.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

a proper kernel configuration for running kselftest can be obtained with:

 $ yes | make kselftest-merge

enable compile support for the 'red' qdisc: otherwise, tdc kselftest fail
when trying to run tdc test items contained in red.json.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Link: https://lore.kernel.org/r/cfa23f2d4f672401e6cebca3a321dd1901a9ff07.1606416464.git.dcaratti@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When inet_rtm_getroute() was converted to use the RCU variants of
ip_route_input() and ip_route_output_key(), the TOS parameters
stopped being masked with IPTOS_RT_MASK before doing the route lookup.

As a result, "ip route get" can return a different route than what
would be used when sending real packets.

For example:

    $ ip route add 192.0.2.11/32 dev eth0
    $ ip route add unreachable 192.0.2.11/32 tos 2
    $ ip route get 192.0.2.11 tos 2
    RTNETLINK answers: No route to host

But, packets with TOS 2 (ECT(0) if interpreted as an ECN bit) would
actually be routed using the first route:

    $ ping -c 1 -Q 2 192.0.2.11
    PING 192.0.2.11 (192.0.2.11) 56(84) bytes of data.
    64 bytes from 192.0.2.11: icmp_seq=1 ttl=64 time=0.173 ms

    --- 192.0.2.11 ping statistics ---
    1 packets transmitted, 1 received, 0% packet loss, time 0ms
    rtt min/avg/max/mdev = 0.173/0.173/0.173/0.000 ms

This patch re-applies IPTOS_RT_MASK in inet_rtm_getroute(), to
return results consistent with real route lookups.

Fixes: 3765d35e ("net: ipv4: Convert inet_rtm_getroute to rcu versions of route lookup")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/b2d237d08317ca55926add9654a48409ac1b8f5b.1606412894.git.gnault@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Daniel Borkmann says:

====================
pull-request: bpf 2020-11-28

1) Do not reference the skb for xsk's generic TX side since when looped
   back into RX it might crash in generic XDP, from Björn Töpel.

2) Fix umem cleanup on a partially set up xsk socket when being destroyed,
   from Magnus Karlsson.

3) Fix an incorrect netdev reference count when failing xsk_bind() operation,
   from Marek Majtyka.

4) Fix bpftool to set an error code on failed calloc() in build_btf_type_table(),
   from Zhen Lei.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  bpf: Add MAINTAINERS entry for BPF LSM
  bpftool: Fix error return value in build_btf_type_table
  net, xsk: Avoid taking multiple skbuff references
  xsk: Fix incorrect netdev reference count
  xsk: Fix umem cleanup bug at socket destruct
  MAINTAINERS: Update XDP and AF_XDP entries
====================

Link: https://lore.kernel.org/r/20201128005104.1205-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Simon Wunderlich says:

====================
Here are some batman-adv bugfixes:

 - Fix head/tailroom issues for fragments, by Sven Eckelmann (3 patches)

* tag 'batadv-net-pullrequest-20201127' of git://git.open-mesh.org/linux-merge:
  batman-adv: Don't always reallocate the fragmentation skb head
  batman-adv: Reserve needed_*room for fragments
  batman-adv: Consider fragmentation for needed_headroom
====================

Link: https://lore.kernel.org/r/20201127173849.19208-1-sw@simonwunderlich.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Netfilter changes PACKET_OTHERHOST to PACKET_HOST before invoking the
hooks as, while it's an expected value for a bridge, routing expects
PACKET_HOST. The change is undone later on after hook traversal. This
can be seen with pairs of functions updating skb>pkt_type and then
reverting it to its original value:

For hook NF_INET_PRE_ROUTING:
  setup_pre_routing / br_nf_pre_routing_finish

For hook NF_INET_FORWARD:
  br_nf_forward_ip / br_nf_forward_finish

But the third case where netfilter does this, for hook
NF_INET_POST_ROUTING, the packet type is changed in br_nf_post_routing
but never reverted. A comment says:

  /* We assume any code from br_dev_queue_push_xmit onwards doesn't care
   * about the value of skb->pkt_type. */

But when having a tunnel (say vxlan) attached to a bridge we have the
following call trace:

  br_nf_pre_routing
  br_nf_pre_routing_ipv6
     br_nf_pre_routing_finish
  br_nf_forward_ip
     br_nf_forward_finish
  br_nf_post_routing           <- pkt_type is updated to PACKET_HOST
     br_nf_dev_queue_xmit      <- but not reverted to its original value
  vxlan_xmit
     vxlan_xmit_one
        skb_tunnel_check_pmtu  <- a check on pkt_type is performed

In this specific case, this creates issues such as when an ICMPv6 PTB
should be sent back. When CONFIG_BRIDGE_NETFILTER is enabled, the PTB
isn't sent (as skb_tunnel_check_pmtu checks if pkt_type is PACKET_HOST
and returns early).

If the comment is right and no one cares about the value of
skb->pkt_type after br_dev_queue_push_xmit (which isn't true), resetting
it to its original value should be safe.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20201123174902.622102-1-atenart@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'asm-generic-fixes-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pull asm-generic fix from Arnd Bergmann:
 "Add correct MAX_POSSIBLE_PHYSMEM_BITS setting to asm-generic.

  This is a single bugfix for a bug that Stefan Agner found on 32-bit
  Arm, but that exists on several other architectures"

* tag 'asm-generic-fixes-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  arch: pgtable: define MAX_POSSIBLE_PHYSMEM_BITS where needed

Pull ARM SoC fixes from Arnd Bergmann:
 "Another set of patches for devicetree files and Arm SoC specific
  drivers:

   - A fix for OP-TEE shared memory on non-SMP systems

   - multiple code fixes for the OMAP platform, including one regression
     for the CPSW network driver and a few runtime warning fixes

   - Some DT patches for the Rockchip RK3399 platform, in particular
     fixing the MMC device ordering that recently became
     nondeterministic with async probe.

   - Multiple DT fixes for the Tegra platform, including a regression
     fix for suspend/resume on TX2

   - A regression fix for a user-triggered fault in the NXP dpio driver

   - A regression fix for a bug caused by an earlier bug fix in the
     xilinx firmware driver

   - Two more DTC warning fixes

   - Sylvain Lemieux steps down as maintainer for the NXP LPC32xx
     platform"

* tag 'arm-soc-fixes-v5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
  arm64: tegra: Fix Tegra234 VDK node names
  arm64: tegra: Wrong AON HSP reg property size
  arm64: tegra: Fix USB_VBUS_EN0 regulator on Jetson TX1
  arm64: tegra: Correct the UART for Jetson Xavier NX
  arm64: tegra: Disable the ACONNECT for Jetson TX2
  optee: add writeback to valid memory type
  firmware: xilinx: Use hash-table for api feature check
  firmware: xilinx: Fix SD DLL node reset issue
  soc: fsl: dpio: Get the cpumask through cpumask_of(cpu)
  ARM: dts: dra76x: m_can: fix order of clocks
  bus: ti-sysc: suppress err msg for timers used as clockevent/source
  MAINTAINERS: Remove myself as LPC32xx maintainers
  arm64: dts: qcom: clear the warnings caused by empty dma-ranges
  arm64: dts: broadcom: clear the warnings caused by empty dma-ranges
  ARM: dts: am437x-l4: fix compatible for cpsw switch dt node
  arm64: dts: rockchip: Reorder LED triggers from mmc devices on rk3399-roc-pc.
  arm64: dts: rockchip: Assign a fixed index to mmc devices on rk3399 boards.
  arm64: dts: rockchip: Remove system-power-controller from pmic on Odroid Go Advance
  arm64: dts: rockchip: fix NanoPi R2S GMAC clock name
  ARM: OMAP2+: Manage MPU state properly for omap_enter_idle_coupled()
  ...

Pull networking fixes from Jakub Kicinski:
 "Networking fixes for 5.10-rc6, including fixes from the WiFi driver,
  and CAN subtrees.

  Current release - regressions:

   - gro_cells: reduce number of synchronize_net() calls

   - ch_ktls: release a lock before jumping to an error path

  Current release - always broken:

   - tcp: Allow full IP tos/IPv6 tclass to be reflected in L3 header

  Previous release - regressions:

   - net/tls: fix missing received data after fast remote close

   - vsock/virtio: discard packets only when socket is really closed

   - sock: set sk_err to ee_errno on dequeue from errq

   - cxgb4: fix the panic caused by non smac rewrite

  Previous release - always broken:

   - tcp: fix corner cases around setting ECN with BPF selection of
     congestion control

   - tcp: fix race condition when creating child sockets from syncookies
     on loopback interface

   - usbnet: ipheth: fix connectivity with iOS 14

   - tun: honor IOCB_NOWAIT flag

   - net/packet: fix packet receive on L3 devices without visible hard
     header

   - devlink: Make sure devlink instance and port are in same net
     namespace

   - net: openvswitch: fix TTL decrement action netlink message format

   - bonding: wait for sysfs kobject destruction before freeing struct
     slave

   - net: stmmac: fix upstream patch applied to the wrong context

   - bnxt_en: fix return value and unwind in probe error paths

  Misc:

   - devlink: add extra layer of categorization to the reload stats uAPI
     before it's released"

* tag 'net-5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (68 commits)
  sock: set sk_err to ee_errno on dequeue from errq
  mptcp: fix NULL ptr dereference on bad MPJ
  net: openvswitch: fix TTL decrement action netlink message format
  can: af_can: can_rx_unregister(): remove WARN() statement from list operation sanity check
  can: m_can: m_can_dev_setup(): add support for bosch mcan version 3.3.0
  can: m_can: fix nominal bitiming tseg2 min for version >= 3.1
  can: m_can: m_can_open(): remove IRQF_TRIGGER_FALLING from request_threaded_irq()'s flags
  can: mcp251xfd: mcp251xfd_probe(): bail out if no IRQ was given
  can: gs_usb: fix endianess problem with candleLight firmware
  ch_ktls: lock is not freed
  net/tls: Protect from calling tls_dev_del for TLS RX twice
  devlink: Make sure devlink instance and port are in same net namespace
  devlink: Hold rtnl lock while reading netdev attributes
  ptp: clockmatrix: bug fix for idtcm_strverscmp
  enetc: Let the hardware auto-advance the taprio base-time of 0
  gro_cells: reduce number of synchronize_net() calls
  net: stmmac: fix incorrect merge of patch upstream
  ipv6: addrlabel: fix possible memory leak in ip6addrlbl_net_init
  Documentation: netdev-FAQ: suggest how to post co-dependent series
  ibmvnic: enhance resetting status check during module exit
  ...

Pull SCSI fixes from James Bottomley:
 "Three small fixes in the UFS driver: two are for power management
  issues and the third is to fix a slew of problem in the sysfs code"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ufs: Fix race between shutdown and runtime resume flow
  scsi: ufs: Make sure clk scaling happens only when HBA is runtime ACTIVE
  scsi: ufs: Fix unexpected values from ufshcd_read_desc_param()

Pull io_uring fixes from Jens Axboe:

 - Out of bounds fix for the cq size cap from earlier this release (Joseph)

 - iov_iter type check fix (Pavel)

 - Files grab + cancelation fix (Pavel)

* tag 'io_uring-5.10-2020-11-27' of git://git.kernel.dk/linux-block:
  io_uring: fix files grab/cancel race
  io_uring: fix ITER_BVEC check
  io_uring: fix shift-out-of-bounds when round up cq size

Pull block fix from Jens Axboe:
 "Just a single fix, for a crash in the keyslot manager"

* tag 'block-5.10-2020-11-27' of git://git.kernel.dk/linux-block:
  block/keyslot-manager: prevent crash when num_slots=1

Pull btrfs fixes from David Sterba:
 "A few fixes for various warnings that accumulated over past two weeks:

   - tree-checker: add missing return values for some errors

   - lockdep fixes
      - when reading qgroup config and starting quota rescan
      - reverse order of quota ioctl lock and VFS freeze lock

   - avoid accessing potentially stale fs info during device scan,
     reported by syzbot

   - add scope NOFS protection around qgroup relation changes

   - check for running transaction before flushing qgroups

   - fix tracking of new delalloc ranges for some cases"

* tag 'for-5.10-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: fix lockdep splat when enabling and disabling qgroups
  btrfs: do nofs allocations when adding and removing qgroup relations
  btrfs: fix lockdep splat when reading qgroup config on mount
  btrfs: tree-checker: add missing returns after data_ref alignment checks
  btrfs: don't access possibly stale fs_info data for printing duplicate device
  btrfs: tree-checker: add missing return after error in root_item
  btrfs: qgroup: don't commit transaction when we already hold the handle
  btrfs: fix missing delalloc new bit for new delalloc ranges

Pull rdma fixes from Jason Gunthorpe:
 "Two security issues and several small bug fixes. Things seem to have
  stabilized for this release here.

  Summary:

   - Significant out of bounds access security issue in i40iw

   - Fix misuse of mmu notifiers in hfi1

   - Several errors in the register map/usage in hns

   - Missing error returns in mthca"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/hns: Bugfix for memory window mtpt configuration
  RDMA/hns: Fix retry_cnt and rnr_cnt when querying QP
  RDMA/hns: Fix wrong field of SRQ number the device supports
  IB/hfi1: Ensure correct mm is used at all times
  RDMA/i40iw: Address an mmap handler exploit in i40iw
  IB/mthca: fix return value of error branch in mthca_init_cq()

Pull mtd fixes from Miquel Raynal:
 "Because of a recent change in the core, NAND controller drivers
  initializing the ECC engine too early in the probe path are broken.

  Drivers should wait for the NAND device to be discovered and its
  memory layout known before doing any ECC related initialization, so
  instead of reverting the faulty change which is actually moving in the
  right direction, let's fix the drivers directly: socrates, sharpsl,
  r852, plat_nand, pasemi, tmio, txx9ndfmc, orion, mpc5121, lpc32xx_slc,
  lpc32xx_mlc, fsmc, diskonchip, davinci, cs553x, au1550, ams-delta,
  xway and gpio"

* tag 'mtd/fixes-for-5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
  mtd: rawnand: socrates: Move the ECC initialization to ->attach_chip()
  mtd: rawnand: sharpsl: Move the ECC initialization to ->attach_chip()
  mtd: rawnand: r852: Move the ECC initialization to ->attach_chip()
  mtd: rawnand: plat_nand: Move the ECC initialization to ->attach_chip()
  mtd: rawnand: pasemi: Move the ECC initialization to ->attach_chip()
  mtd: rawnand: tmio: Move the ECC initialization to ->attach_chip()
  mtd: rawnand: txx9ndfmc: Move the ECC initialization to ->attach_chip()
  mtd: rawnand: orion: Move the ECC initialization to ->attach_chip()
  mtd: rawnand: mpc5121: Move the ECC initialization to ->attach_chip()
  mtd: rawnand: lpc32xx_slc: Move the ECC initialization to ->attach_chip()
  mtd: rawnand: lpc32xx_mlc: Move the ECC initialization to ->attach_chip()
  mtd: rawnand: fsmc: Move the ECC initialization to ->attach_chip()
  mtd: rawnand: diskonchip: Move the ECC initialization to ->attach_chip()
  mtd: rawnand: davinci: Move the ECC initialization to ->attach_chip()
  mtd: rawnand: cs553x: Move the ECC initialization to ->attach_chip()
  mtd: rawnand: au1550: Move the ECC initialization to ->attach_chip()
  mtd: rawnand: ams-delta: Move the ECC initialization to ->attach_chip()
  mtd: rawnand: xway: Move the ECC initialization to ->attach_chip()
  mtd: rawnand: gpio: Move the ECC initialization to ->attach_chip()

Pull spi fixes from Mark Brown:
 "A few fixes for v5.10,  one for the core which fixes some potential
  races for controllers with multiple chip selects when configuration of
  the chip select for one client device races with the addition and
  initial setup of an additional client"

* tag 'spi-fix-v5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: dw: Fix spi registration for controllers overriding CS
  spi: imx: fix the unbalanced spi runtime pm management
  spi: spi-nxp-fspi: fix fspi panic by unexpected interrupts
  spi: Take the SPI IO-mutex in the spi_setup() method

Pull virtual digital TV driver fixes from Mauro Carvalho Chehab:
 "A series of fixes for the new virtual digital TV driver (vidtv), which
  is meant to help doing tests with the digital TV core and media
  userspace apps and libraries.

  They cover a series of issues I found on it, together with a few new
  things in order to make it easier to detect problems at the DVB core"

* tag 'media/v5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (36 commits)
  media: vidtv.rst: add kernel-doc markups
  media: vidtv.rst: update vidtv documentation
  media: vidtv: simplify EIT write function
  media: vidtv: simplify NIT write function
  media: vidtv: simplify SDT write function
  media: vidtv: cleanup PMT write table function
  media: vidtv: cleanup PAT write function
  media: vidtv: cleanup PSI table header function
  media: vidtv: cleanup PSI descriptor write function
  media: vidtv: simplify the crc writing logic
  media: vidtv: simplify PSI write function
  media: vidtv: add date to the current event
  media: vidtv: fix service_id at SDT table
  media: vidtv: fix service type
  media: vidtv: add a PID entry for the NIT table
  media: vidtv: properly fill EIT service_id
  media: vidtv: fix the network ID range
  media: vidtv: improve EIT data
  media: vidtv: cleanup null packet initialization logic
  media: vidtv: pre-initialize mux arrays
  ...

Pull drm fixes from Dave Airlie:
 "Unfortunately this has a bit of thanksgiving stuffing in it, as it a
  bit larger (at least the vc4 patches) than I like at this point in
  time.

  The main thing is it has a bunch of regressions fixes for reports in
  the last couple of weeks, ast, nouveau and the amdgpu ttm init fix,
  along with the usual selection of amdgpu and i915 fixes.

  The vc4 fixes are a few but they are fixes and the nastiest one is a
  fix for when you have a 2.4Ghz Wifi and a HDMI signal with a clock in
  that range and there isn't enough shielding and interference happen
  between the two, the fix adjusts the mode clock to try and avoid the
  wifi channels in that case.

  Hopefully you can merge this between turkey slices, and next week
  should be quieter.

  ast:
   - LUT loading regression fix

  nouveau:
   - relocations regression fix

  amdgpu:
   - ttm init oops fix
   - Runtime pm fix
   - SI UVD suspend/resume fix
   - HDCP fix for headless cards
   - Sienna Cichlid golden register update

  i915:
   - Fix Perf/OA workaround register corruption (Lionel)
   - Correct a comment statement in GVT (Yan)
   - Fix GT enable/disable iterrupts, including a race condition that
     prevented GPU to go idle (Chris)
   - Free stale request on destroying the virtual engine (Chris)

  exynos:
   - config dependency fix

  mediatek:
   - unused var removal
   - horizonal front/back porch formula fix

  vc4:
   - wifi and hdmi interference fix
   - mode rejection fixes
   - use after free fix
   - cleanup some code"

* tag 'drm-fixes-2020-11-27-1' of git://anongit.freedesktop.org/drm/drm: (28 commits)
  drm/nouveau: fix relocations applying logic and a double-free
  drm/ast: Reload gamma LUT after changing primary plane's color format
  drm/amdgpu: Fix size calculation when init onchip memory
  drm/amdgpu: update golden setting for sienna_cichlid
  drm/amd/display: Avoid HDCP initialization in devices without output
  drm/i915/gt: Free stale request on destroying the virtual engine
  drm/i915/gt: Don't cancel the interrupt shadow too early
  drm/i915/gt: Track signaled breadcrumbs outside of the breadcrumb spinlock
  drm/amdgpu: fix a page fault
  drm/amdgpu: fix SI UVD firmware validate resume fail
  drm/amd/amdgpu: fix null pointer in runtime pm
  drm/i915/gt: Defer enabling the breadcrumb interrupt to after submission
  drm/i915/gvt: correct a false comment of flag F_UNALIGN
  drm/i915/perf: workaround register corruption in OATAILPTR
  drm/vc4: kms: Don't disable the muxing of an active CRTC
  drm/vc4: kms: Store the unassigned channel list in the state
  drm/exynos: depend on COMMON_CLK to fix compile tests
  drm/mediatek: dsi: Modify horizontal front/back porch byte formula
  drm/vc4: hdmi: Disable Wifi Frequencies
  dt-bindings: display: Add a property to deal with WiFi coexistence
  ...

Merge tag 'linux-can-fixes-for-5.10-20201127' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2020-11-27

The first patch is by me and target the gs_usb driver and fixes the endianess
problem with candleLight firmware.

Another patch by me for the mcp251xfd driver add sanity checking to bail out if
no IRQ is configured.

The next three patches target the m_can driver. A patch by me removes the
hardcoded IRQF_TRIGGER_FALLING from the request_threaded_irq() as this clashes
with the trigger level specified in the DT. Further a patch by me fixes the
nominal bitiming tseg2 min value for modern m_can cores. Pankaj Sharma's patch
add support for cores version 3.3.x.

The last patch by Oliver Hartkopp is for af_can and converts a WARN() into a
pr_warn(), which is triggered by the syzkaller. It was able to create a
situation where the closing of a socket runs simultaneously to the notifier
call chain for removing the CAN network device in use.

* tag 'linux-can-fixes-for-5.10-20201127' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
  can: af_can: can_rx_unregister(): remove WARN() statement from list operation sanity check
  can: m_can: m_can_dev_setup(): add support for bosch mcan version 3.3.0
  can: m_can: fix nominal bitiming tseg2 min for version >= 3.1
  can: m_can: m_can_open(): remove IRQF_TRIGGER_FALLING from request_threaded_irq()'s flags
  can: mcp251xfd: mcp251xfd_probe(): bail out if no IRQ was given
  can: gs_usb: fix endianess problem with candleLight firmware
====================

Link: https://lore.kernel.org/r/20201127100301.512603-1-mkl@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'platform-drivers-x86-v5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:

 - thinkpad_acpi fixes: two bug-fixes and three model specific quirks

 - fixes for misc other drivers: two bug-fixes and three model specific
   quirks

* tag 'platform-drivers-x86-v5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86: touchscreen_dmi: Add info for the Irbis TW118 tablet
  platform/x86: touchscreen_dmi: Add info for the Predia Basic tablet
  platform/x86: intel-vbtn: Support for tablet mode on HP Pavilion 13 x360 PC
  platform/x86: toshiba_acpi: Fix the wrong variable assignment
  platform/x86: acer-wmi: add automatic keyboard background light toggle key as KEY_LIGHTS_TOGGLE
  platform/x86: thinkpad_acpi: Whitelist P15 firmware for dual fan control
  platform/x86: thinkpad_acpi: Send tablet mode switch at wakeup time
  platform/x86: thinkpad_acpi: Add BAT1 is primary battery quirk for Thinkpad Yoga 11e 4th gen
  platform/x86: thinkpad_acpi: Do not report SW_TABLET_MODE on Yoga 11e
  platform/x86: thinkpad_acpi: add P1 gen3 second fan support

When setting sk_err, set it to ee_errno, not ee_origin.

Commit f5f99309 ("sock: do not set sk_err in
sock_dequeue_err_skb") disabled updating sk_err on errq dequeue,
which is correct for most error types (origins):

  -       sk->sk_err = err;

Commit 38b25793 ("sock: reset sk_err when the error queue is
empty") reenabled the behavior for IMCP origins, which do require it:

  +       if (icmp_next)
  +               sk->sk_err = SKB_EXT_ERR(skb_next)->ee.ee_origin;

But read from ee_errno.

Fixes: 38b25793 ("sock: reset sk_err when the error queue is empty")
Reported-by: Ayush Ranjan <ayushranjan@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Link: https://lore.kernel.org/r/20201126151220.2819322-1-willemdebruijn.kernel@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

If an msk listener receives an MPJ carrying an invalid token, it
will zero the request socket msk entry. That should later
cause fallback and subflow reset - as per RFC - at
subflow_syn_recv_sock() time due to failing hmac validation.

Since commit 4cf8b7e4 ("subflow: introduce and use
mptcp_can_accept_new_subflow()"), we unconditionally dereference
- in mptcp_can_accept_new_subflow - the subflow request msk
before performing hmac validation. In the above scenario we
hit a NULL ptr dereference.

Address the issue doing the hmac validation earlier.

Fixes: 4cf8b7e4 ("subflow: introduce and use mptcp_can_accept_new_subflow()")
Tested-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/03b2cfa3ac80d8fc18272edc6442a9ddf0b1e34e.1606400227.git.pabeni@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull kvm fixes from Paolo Bonzini:
 "ARM:
   - Fix alignment of the new HYP sections
   - Fix GICR_TYPER access from userspace

  S390:
   - do not reset the global diag318 data for per-cpu reset
   - do not mark memory as protected too early
   - fix for destroy page ultravisor call

  x86:
   - fix for SEV debugging
   - fix incorrect return code
   - fix for 'noapic' with PIC in userspace and LAPIC in kernel
   - fix for 5-level paging"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  kvm: x86/mmu: Fix get_mmio_spte() on CPUs supporting 5-level PT
  KVM: x86: Fix split-irqchip vs interrupt injection window request
  KVM: x86: handle !lapic_in_kernel case in kvm_cpu_*_extint
  MAINTAINERS: Update email address for Sean Christopherson
  MAINTAINERS: add uv.c also to KVM/s390
  s390/uv: handle destroy page legacy interface
  KVM: arm64: vgic-v3: Drop the reporting of GICR_TYPER.Last for userspace
  KVM: SVM: fix error return code in svm_create_vcpu()
  KVM: SVM: Fix offset computation bug in __sev_dbg_decrypt().
  KVM: arm64: Correctly align nVHE percpu data
  KVM: s390: remove diag318 reset code
  KVM: s390: pv: Mark mm as protected after the set secure parameters and improve cleanup