- 17 Jul, 2020 3 commits
-
-
Masami Hiramatsu authored
Fix the memory leakage in debuginfo__find_trace_events() when the probe point is not found in the debuginfo. If there is no probe point found in the debuginfo, debuginfo__find_probes() will NOT return -ENOENT, but 0. Thus the caller of debuginfo__find_probes() must check the tf.ntevs and release the allocated memory for the array of struct probe_trace_event. The current code releases the memory only if the debuginfo__find_probes() hits an error but not checks tf.ntevs. In the result, the memory allocated on *tevs are not released if tf.ntevs == 0. This fixes the memory leakage by checking tf.ntevs == 0 in addition to ret < 0. Fixes: ff741783 ("perf probe: Introduce debuginfo to encapsulate dwarf information") Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Reviewed-by:
Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/159438668346.62703.10887420400718492503.stgit@devnote2Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Masami Hiramatsu authored
Fix a wrong "variable not found" warning when the probe point is not found in the debuginfo. Since the debuginfo__find_probes() can return 0 even if it does not find given probe point in the debuginfo, fill_empty_trace_arg() can be called with tf.ntevs == 0 and it can emit a wrong warning. To fix this, reject ntevs == 0 in fill_empty_trace_arg(). E.g. without this patch; # perf probe -x /lib64/libc-2.30.so -a "memcpy arg1=%di" Failed to find the location of the '%di' variable at this address. Perhaps it has been optimized out. Use -V with the --range option to show '%di' location range. Added new events: probe_libc:memcpy (on memcpy in /usr/lib64/libc-2.30.so with arg1=%di) probe_libc:memcpy (on memcpy in /usr/lib64/libc-2.30.so with arg1=%di) You can now use it in all perf tools, such as: perf record -e probe_libc:memcpy -aR sleep 1 With this; # perf probe -x /lib64/libc-2.30.so -a "memcpy arg1=%di" Added new events: probe_libc:memcpy (on memcpy in /usr/lib64/libc-2.30.so with arg1=%di) probe_libc:memcpy (on memcpy in /usr/lib64/libc-2.30.so with arg1=%di) You can now use it in all perf tools, such as: perf record -e probe_libc:memcpy -aR sleep 1 Fixes: cb402730 ("perf probe: Trace a magic number if variable is not found") Reported-by:Andi Kleen <andi@firstfloor.org> Signed-off-by:
Andi Kleen <ak@linux.intel.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/159438667364.62703.2200642186798763202.stgit@devnote2Signed-off-by:
-
Masami Hiramatsu authored
There is a case that several same-name symbols points to the same address. In that case, 'perf probe' returns an error. E.g. # perf probe -x /lib64/libc-2.30.so -v -a "memcpy arg1=%di" probe-definition(0): memcpy arg1=%di symbol:memcpy file:(null) line:0 offset:0 return:0 lazy:(null) parsing arg: arg1=%di into name:arg1 %di 1 arguments symbol:setjmp file:(null) line:0 offset:0 return:0 lazy:(null) symbol:longjmp file:(null) line:0 offset:0 return:0 lazy:(null) symbol:longjmp_target file:(null) line:0 offset:0 return:0 lazy:(null) symbol:lll_lock_wait_private file:(null) line:0 offset:0 return:0 lazy:(null) symbol:memory_mallopt_arena_max file:(null) line:0 offset:0 return:0 lazy:(null) symbol:memory_mallopt_arena_test file:(null) line:0 offset:0 return:0 lazy:(null) symbol:memory_tunable_tcache_max_bytes file:(null) line:0 offset:0 return:0 lazy:(null) symbol:memory_tunable_tcache_count file:(null) line:0 offset:0 return:0 lazy:(null) symbol:memory_tunable_tcache_unsorted_limit file:(null) line:0 offset:0 return:0 lazy:(null) symbol:memory_mallopt_trim_threshold file:(null) line:0 offset:0 return:0 lazy:(null) symbol:memory_mallopt_top_pad file:(null) line:0 offset:0 return:0 lazy:(null) symbol:memory_mallopt_mmap_threshold file:(null) line:0 offset:0 return:0 lazy:(null) symbol:memory_mallopt_mmap_max file:(null) line:0 offset:0 return:0 lazy:(null) symbol:memory_mallopt_perturb file:(null) line:0 offset:0 return:0 lazy:(null) symbol:memory_mallopt_mxfast file:(null) line:0 offset:0 return:0 lazy:(null) symbol:memory_heap_new file:(null) line:0 offset:0 return:0 lazy:(null) symbol:memory_arena_reuse_free_list file:(null) line:0 offset:0 return:0 lazy:(null) symbol:memory_arena_reuse file:(null) line:0 offset:0 return:0 lazy:(null) symbol:memory_arena_reuse_wait file:(null) line:0 offset:0 return:0 lazy:(null) symbol:memory_arena_new file:(null) line:0 offset:0 return:0 lazy:(null) symbol:memory_arena_retry file:(null) line:0 offset:0 return:0 lazy:(null) symbol:memory_sbrk_less file:(null) line:0 offset:0 return:0 lazy:(null) symbol:memory_heap_free file:(null) line:0 offset:0 return:0 lazy:(null) symbol:memory_heap_less file:(null) line:0 offset:0 return:0 lazy:(null) symbol:memory_tcache_double_free file:(null) line:0 offset:0 return:0 lazy:(null) symbol:memory_heap_more file:(null) line:0 offset:0 return:0 lazy:(null) symbol:memory_sbrk_more file:(null) line:0 offset:0 return:0 lazy:(null) symbol:memory_malloc_retry file:(null) line:0 offset:0 return:0 lazy:(null) symbol:memory_memalign_retry file:(null) line:0 offset:0 return:0 lazy:(null) symbol:memory_mallopt_free_dyn_thresholds file:(null) line:0 offset:0 return:0 lazy:(null) symbol:memory_realloc_retry file:(null) line:0 offset:0 return:0 lazy:(null) symbol:memory_calloc_retry file:(null) line:0 offset:0 return:0 lazy:(null) symbol:memory_mallopt file:(null) line:0 offset:0 return:0 lazy:(null) Open Debuginfo file: /usr/lib/debug/usr/lib64/libc-2.30.so.debug Try to find probe point from debuginfo. Opening /sys/kernel/debug/tracing//README write=0 Failed to find the location of the '%di' variable at this address. Perhaps it has been optimized out. Use -V with the --range option to show '%di' location range. An error occurred in debuginfo analysis (-2). Trying to use symbols. Opening /sys/kernel/debug/tracing//uprobe_events write=1 Writing event: p:probe_libc/memcpy /usr/lib64/libc-2.30.so:0x914c0 arg1=%di Writing event: p:probe_libc/memcpy /usr/lib64/libc-2.30.so:0x914c0 arg1=%di Failed to write event: File exists Error: Failed to add events. Reason: File exists (Code: -17) You can see that perf tried to write completely the same probe definition twice, which caused an error. To fix this issue, check the symbol list and drop duplicated symbols (which has the same symbol name and address) from it. With this patch: # perf probe -x /lib64/libc-2.30.so -a "memcpy arg1=%di" Failed to find the location of the '%di' variable at this address. Perhaps it has been optimized out. Use -V with the --range option to show '%di' location range. Added new events: probe_libc:memcpy (on memcpy in /usr/lib64/libc-2.30.so with arg1=%di) probe_libc:memcpy (on memcpy in /usr/lib64/libc-2.30.so with arg1=%di) You can now use it in all perf tools, such as: perf record -e probe_libc:memcpy -aR sleep 1 Committer notes: Fix this build error on 32-bit arches by using PRIx64 for symbol->start, that is an u64: In file included from util/probe-event.c:27: util/probe-event.c: In function 'find_probe_trace_events_from_map': util/probe-event.c:2978:14: error: format '%lx' expects argument of type 'long unsigned int', but argument 5 has type 'u64' {aka 'long long unsigned int'} [-Werror=format=] pr_debug("Found duplicated symbol %s @ %lx\n", ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ util/debug.h:17:21: note: in definition of macro 'pr_fmt' #define pr_fmt(fmt) fmt ^~~ util/probe-event.c:2978:5: note: in expansion of macro 'pr_debug' pr_debug("Found duplicated symbol %s @ %lx\n", ^~~~~~~~ Reported-by:
-
- 10 Jul, 2020 7 commits
-
-
Ian Rogers authored
'perf kmem' has an input file option but current an output file option fails: $ sudo perf kmem record -o /tmp/p.data sleep 1 Error: unknown switch `o' Usage: perf kmem [<options>] {record|stat} -f, --force don't complain, do it -i, --input <file> input file name -l, --line <num> show n lines -s, --sort <key[,key2...]> sort by keys: ptr, callsite, bytes, hit, pingpong, frag, page, order, mig> -v, --verbose be more verbose (show symbol address, etc) --alloc show per-allocation statistics --caller show per-callsite statistics --live Show live page stat --page Analyze page allocator --raw-ip show raw ip instead of symbol --slab Analyze slab allocator --time <str> Time span of interest (start,stop) 'perf sched' is similar in implementation and avoids the problem by passing additional arguments to 'perf record'. This change makes 'perf kmem' parse command line options consistently with 'perf sched', although neither actually list that -o is a supported option. Signed-off-by:Ian Rogers <irogers@google.com> Tested-by:
-
Ian Rogers authored
Setting the parse_events_error directly doesn't increment num_errors causing the error message not to be displayed. Use the parse_events__handle_error function that sets num_errors and handle multiple errors. Committer notes: Ian provided a before/after upon request: Before: $ /tmp/perf/perf record -e /tmp/perf/util/parse-events.o Run 'perf list' for a list of valid events Usage: perf record [<options>] [<command>] or: perf record [<options>] -- <command> [<options>] -e, --event <event> event selector. use 'perf list' to list available event After: $ /tmp/perf/perf record -e /tmp/perf/util/parse-events.o event syntax error: '/tmp/perf/util/parse-events.o' \___ Failed to load /tmp/perf/util/parse-events.o: BPF object format invalid (add -v to see detail) Run 'perf list' for a list of valid events Usage: perf record [<options>] [<command>] or: perf record [<options>] -- <command> [<options>] -e, --event <event> event selector. use 'perf list' to list available events Signed-off-by:Jiri Olsa <jolsa@redhat.com> Tested-by:
-
Adrian Hunter authored
It is generally more useful to show the symbol with an address. In this case, the print function requires the 'machine' which means changing callers to provide it as a parameter. It is optional because most events do not need it and the callers that matter can provide it. Committer notes: Made 'union perf_event' continue to be the first parameter to the perf_event__fprintf() and perf_event__fprintf_text_poke() events. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: x86@kernel.org Link: http://lore.kernel.org/lkml/20200512121922.8997-16-adrian.hunter@intel.comSigned-off-by:
-
Adrian Hunter authored
Consistent with other new events, add an option to perf script to display text poke events and ksymbol events. Both text poke events and ksymbol events are displayed because some text pokes (e.g. ftrace trampolines) have corresponding ksymbol events. Signed-off-by:
-
Adrian Hunter authored
Select text poke events when available and the kernel is being traced. Process text poke events to invalidate entries in Intel PT's instruction cache. Example: The example requires kernel config: CONFIG_PROC_SYSCTL=y CONFIG_SCHED_DEBUG=y CONFIG_SCHEDSTATS=y Before: # perf record -o perf.data.before --kcore -a -e intel_pt//k -m,64M & # cat /proc/sys/kernel/sched_schedstats 0 # echo 1 > /proc/sys/kernel/sched_schedstats # cat /proc/sys/kernel/sched_schedstats 1 # echo 0 > /proc/sys/kernel/sched_schedstats # cat /proc/sys/kernel/sched_schedstats 0 # kill %1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 3.341 MB perf.data.before ] [1]+ Terminated perf record -o perf.data.before --kcore -a -e intel_pt//k -m,64M # perf script -i perf.data.before --itrace=e >/dev/null Warning: 474 instruction trace errors After: # perf record -o perf.data.after --kcore -a -e intel_pt//k -m,64M & # cat /proc/sys/kernel/sched_schedstats 0 # echo 1 > /proc/sys/kernel/sched_schedstats # cat /proc/sys/kernel/sched_schedstats 1 # echo 0 > /proc/sys/kernel/sched_schedstats # cat /proc/sys/kernel/sched_schedstats 0 # kill %1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 2.646 MB perf.data.after ] [1]+ Terminated perf record -o perf.data.after --kcore -a -e intel_pt//k -m,64M # perf script -i perf.data.after --itrace=e >/dev/null Example: The example requires kernel config: # CONFIG_FUNCTION_TRACER is not set Before: # perf record --kcore -m,64M -o t1 -a -e intel_pt//k & # perf probe __schedule Added new event: probe:__schedule (on __schedule) You can now use it in all perf tools, such as: perf record -e probe:__schedule -aR sleep 1 # perf record -e probe:__schedule -aR sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.026 MB perf.data (68 samples) ] # perf probe -d probe:__schedule Removed event: probe:__schedule # kill %1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 41.268 MB t1 ] [1]+ Terminated perf record --kcore -m,64M -o t1 -a -e intel_pt//k # perf script -i t1 --itrace=e >/dev/null Warning: 207 instruction trace errors After: # perf record --kcore -m,64M -o t1 -a -e intel_pt//k & # perf probe __schedule Added new event: probe:__schedule (on __schedule) You can now use it in all perf tools, such as: perf record -e probe:__schedule -aR sleep 1 # perf record -e probe:__schedule -aR sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.028 MB perf.data (107 samples) ] # perf probe -d probe:__schedule Removed event: probe:__schedule # kill %1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 39.978 MB t1 ] [1]+ Terminated perf record --kcore -m,64M -o t1 -a -e intel_pt//k # perf script -i t1 --itrace=e >/dev/null # perf script -i t1 --no-itrace -D | grep 'POKE\|KSYMBOL' 6 565303693547 0x291f18 [0x50]: PERF_RECORD_KSYMBOL addr ffffffffc027a000 len 4096 type 2 flags 0x0 name kprobe_insn_page 6 565303697010 0x291f68 [0x40]: PERF_RECORD_TEXT_POKE addr 0xffffffffc027a000 old len 0 new len 6 6 565303838278 0x291fa8 [0x50]: PERF_RECORD_KSYMBOL addr ffffffffc027c000 len 4096 type 2 flags 0x0 name kprobe_optinsn_page 6 565303848286 0x291ff8 [0xa0]: PERF_RECORD_TEXT_POKE addr 0xffffffffc027c000 old len 0 new len 106 6 565369336743 0x292af8 [0x40]: PERF_RECORD_TEXT_POKE addr 0xffffffff88ab8890 old len 5 new len 5 7 566434327704 0x217c208 [0x40]: PERF_RECORD_TEXT_POKE addr 0xffffffff88ab8890 old len 5 new len 5 6 566456313475 0x293198 [0xa0]: PERF_RECORD_TEXT_POKE addr 0xffffffffc027c000 old len 106 new len 0 6 566456314935 0x293238 [0x40]: PERF_RECORD_TEXT_POKE addr 0xffffffffc027a000 old len 6 new len 0 Example: The example requires kernel config: CONFIG_FUNCTION_TRACER=y Before: # perf record --kcore -m,64M -o t1 -a -e intel_pt//k & # perf probe __kmalloc Added new event: probe:__kmalloc (on __kmalloc) You can now use it in all perf tools, such as: perf record -e probe:__kmalloc -aR sleep 1 # perf record -e probe:__kmalloc -aR sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.022 MB perf.data (6 samples) ] # perf probe -d probe:__kmalloc Removed event: probe:__kmalloc # kill %1 [ perf record: Woken up 2 times to write data ] [ perf record: Captured and wrote 43.850 MB t1 ] [1]+ Terminated perf record --kcore -m,64M -o t1 -a -e intel_pt//k # perf script -i t1 --itrace=e >/dev/null Warning: 8 instruction trace errors After: # perf record --kcore -m,64M -o t1 -a -e intel_pt//k & # perf probe __kmalloc Added new event: probe:__kmalloc (on __kmalloc) You can now use it in all perf tools, such as: perf record -e probe:__kmalloc -aR sleep 1 # perf record -e probe:__kmalloc -aR sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.037 MB perf.data (206 samples) ] # perf probe -d probe:__kmalloc Removed event: probe:__kmalloc # kill %1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 41.442 MB t1 ] [1]+ Terminated perf record --kcore -m,64M -o t1 -a -e intel_pt//k # perf script -i t1 --itrace=e >/dev/null # perf script -i t1 --no-itrace -D | grep 'POKE\|KSYMBOL' 5 312216133258 0x8bafe0 [0x50]: PERF_RECORD_KSYMBOL addr ffffffffc0360000 len 415 type 2 flags 0x0 name ftrace_trampoline 5 312216133494 0x8bb030 [0x1d8]: PERF_RECORD_TEXT_POKE addr 0xffffffffc0360000 old len 0 new len 415 5 312216229563 0x8bb208 [0x40]: PERF_RECORD_TEXT_POKE addr 0xffffffffac6016f5 old len 5 new len 5 5 312216239063 0x8bb248 [0x40]: PERF_RECORD_TEXT_POKE addr 0xffffffffac601803 old len 5 new len 5 5 312216727230 0x8bb288 [0x40]: PERF_RECORD_TEXT_POKE addr 0xffffffffabbea190 old len 5 new len 5 5 312216739322 0x8bb2c8 [0x40]: PERF_RECORD_TEXT_POKE addr 0xffffffffac6016f5 old len 5 new len 5 5 312216748321 0x8bb308 [0x40]: PERF_RECORD_TEXT_POKE addr 0xffffffffac601803 old len 5 new len 5 7 313287163462 0x2817430 [0x40]: PERF_RECORD_TEXT_POKE addr 0xffffffffac6016f5 old len 5 new len 5 7 313287174890 0x2817470 [0x40]: PERF_RECORD_TEXT_POKE addr 0xffffffffac601803 old len 5 new len 5 7 313287818979 0x28174b0 [0x40]: PERF_RECORD_TEXT_POKE addr 0xffffffffabbea190 old len 5 new len 5 7 313287829357 0x28174f0 [0x40]: PERF_RECORD_TEXT_POKE addr 0xffffffffac6016f5 old len 5 new len 5 7 313287841246 0x2817530 [0x40]: PERF_RECORD_TEXT_POKE addr 0xffffffffac601803 old len 5 new len 5 Signed-off-by: -
Adrian Hunter authored
PERF_RECORD_KSYMBOL_TYPE_OOL marks an executable page. Create a map backed only by memory, which will be populated as necessary by text poke events. Committer notes: From the patch: OOL stands for "Out of line" code such as kprobe-replaced instructions or optimized kprobes or ftrace trampolines. Signed-off-by:
-
Adrian Hunter authored
Add processing for PERF_RECORD_TEXT_POKE events. When a text poke event is processed, then the kernel dso data cache is updated with the poked bytes. Signed-off-by:
-
- 09 Jul, 2020 1 commit
-
-
Numfor Mbiziwo-Tiapo authored
Our local MSAN (Memory Sanitizer) build of perf throws a warning that comes from the "dso__disassemble_filename" function in "tools/perf/util/annotate.c" when running perf record. The warning stems from the call to readlink, in which "build_id_path" was being read into "linkname". Since readlink does not null terminate, an uninitialized memory access would later occur when "linkname" is passed into the strstr function. This is simply fixed by null-terminating "linkname" after the call to readlink. To reproduce this warning, build perf by running: $ make -C tools/perf CLANG=1 CC=clang EXTRA_CFLAGS="-fsanitize=memory -fsanitize-memory-track-origins" (Additionally, llvm might have to be installed and clang might have to be specified as the compiler - export CC=/usr/bin/clang) Then running: tools/perf/perf record -o - ls / | tools/perf/perf --no-pager annotate -i - --stdio Please see the cover letter for why false positive warnings may be generated. Signed-off-by:
Numfor Mbiziwo-Tiapo <nums@google.com> Acked-by:
Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Drayton <mbd@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20190729205750.193289-1-nums@google.comSigned-off-by:
-
- 08 Jul, 2020 2 commits
-
-
Steve MacLean authored
**perf-<pid>.map and jit-<pid>.dump designs: When a JIT generates code to be executed, it must allocate memory and mark it executable using an mmap call. *** perf-<pid>.map design The perf-<pid>.map assumes that any sample recorded in an anonymous memory page is JIT code. It then tries to resolve the symbol name by looking at the process' perf-<pid>.map. *** jit-<pid>.dump design The jit-<pid>.dump mechanism takes a different approach. It requires a JIT to write a `<path>/jit-<pid>.dump` file. This file must also be mmapped so that perf inject -jit can find the file. The JIT must also add JIT_CODE_LOAD records for any functions it generates. The records are timestamped using a clock which can be correlated to the perf record clock. After perf record, the `perf inject -jit` pass parses the recording looking for a `<path>/jit-<pid>.dump` file. When it finds the file, it parses it and for each JIT_CODE_LOAD record: * creates an elf file `<path>/jitted-<pid>-<code_index>.so * injects a new mmap record mapping the new elf file into the process. *** Coexistence design The kernel and perf support both of these mechanisms. We need to make sure perf works on an app supporting either or both of these mechanisms. Both designs rely on mmap records to determine how to resolve an ip address. The mmap records of both techniques by definition overlap. When the JIT compiles a method, it must: * allocate memory (mmap) * add execution privilege (mprotect or mmap. either will generate an mmap event form the kernel to perf) * compile code into memory * add a function record to perf-<pid>.map and/or jit-<pid>.dump Because the jit-<pid>.dump mechanism supports greater capabilities, perf prefers the symbols from jit-<pid>.dump. It implements this based on timestamp ordering of events. There is an implicit ASSUMPTION that the JIT_CODE_LOAD record timestamp will be after the // anon mmap event that was generated during memory allocation or adding the execution privilege setting. *** Problems with the ASSUMPTION The ASSUMPTION made in the Coexistence design section above is violated in the following scenario. *** Scenario While a JIT is jitting code it will eventually need to commit more pages and change these pages to executable permissions. Typically the JIT will want these collocated to minimize branch displacements. The kernel will coalesce these anonymous mapping with identical permissions before sending an MMAP event for the new pages. The address range of the new mmap will not be just the most recently mmap pages. It will include the entire coalesced mmap region. See mm/mmap.c unsigned long mmap_region(struct file *file, unsigned long addr, unsigned long len, vm_flags_t vm_flags, unsigned long pgoff, struct list_head *uf) { ... /* * Can we just expand an old mapping? */ ... perf_event_mmap(vma); ... } *** Symptoms The coalesced // anon mmap event will be timestamped after the JIT_CODE_LOAD records. This means it will be used as the most recent mapping for that entire address range. For remaining events it will look at the inferior perf-<pid>.map for symbols. If both mechanisms are supported, the symbol will appear twice with different module names. This causes weird behavior in reporting. If only jit-<pid>.dump is supported, the symbol will no longer be resolved. ** Implemented solution This patch solves the issue by removing // anon mmap events for any process which has a valid jit-<pid>.dump file. It tracks on a per process basis to handle the case where some running apps support jit-<pid>.dump, but some only support perf-<pid>.map. It adds new assumptions: * // anon mmap events are only required for perf-<pid>.map support. * An app that uses jit-<pid>.dump, no longer needs perf-<pid>.map support. It assumes that any perf-<pid>.map info is inferior. *** Details Use thread->priv to store whether a jitdump file has been processed During "perf inject --jit", discard "//anon*" mmap events for any pid which has sucessfully processed a jitdump file. ** Testing: // jitdump case perf record <app with jitdump> perf inject --jit --input perf.data --output perfjit.data // verify mmap "//anon" events present initially perf script --input perf.data --show-mmap-events | grep '//anon' // verify mmap "//anon" events removed perf script --input perfjit.data --show-mmap-events | grep '//anon' // no jitdump case perf record <app without jitdump> perf inject --jit --input perf.data --output perfjit.data // verify mmap "//anon" events present initially perf script --input perf.data --show-mmap-events | grep '//anon' // verify mmap "//anon" events not removed perf script --input perfjit.data --show-mmap-events | grep '//anon' ** Repro: This issue was discovered while testing the initial CoreCLR jitdump implementation. https://github.com/dotnet/coreclr/pull/26897. ** Alternate solutions considered These were also briefly considered: * Change kernel to not coalesce mmap regions. * Change kernel reporting of coalesced mmap regions to perf. Only include newly mapped memory. * Only strip parts of // anon mmap events overlapping existing jitted-<pid>-<code_index>.so mmap events. Signed-off-by:Steve MacLean <Steve.MacLean@Microsoft.com> Acked-by:
-
Arnaldo Carvalho de Melo authored
To pick up fixes and move perf/core forward, minor conflict as perf_evlist__add_dummy() lost its 'perf_' prefix as it operates on a 'struct evlist', not on a 'struct perf_evlist', i.e. its tools/perf/ specific, it is not in libperf. Signed-off-by:
-
- 07 Jul, 2020 8 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linuxLinus Torvalds authored
Pull perf tooling fixes from Arnaldo Carvalho de Melo: - Intel PT fixes for PEBS-via-PT with registers - Fixes for Intel PT python based GUI - Avoid duplicated sideband events with Intel PT in system wide tracing - Remove needless 'dummy' event from TUI menu, used when synthesizing meta data events for pre-existing processes - Fix corner case segfault when pressing enter in a screen without entries in the TUI for report/top - Fixes for time stamp handling in libtraceevent - Explicitly set utf-8 encoding in perf flamegraph - Update arch/x86/lib/memcpy_64.S copy used in 'perf bench mem memcpy', silencing perf build warning * tag 'perf-tools-fixes-2020-07-07' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf report TUI: Remove needless 'dummy' event from menu perf intel-pt: Fix PEBS sample for XMM registers perf intel-pt: Fix displaying PEBS-via-PT with registers perf intel-pt: Fix recording PEBS-via-PT with registers perf report TUI: Fix segmentation fault in perf_evsel__hists_browse() tools lib traceevent: Add proper KBUFFER_TYPE_TIME_STAMP handling tools lib traceevent: Add API to read time information from kbuffer perf scripts python: exported-sql-viewer.py: Fix time chart call tree perf scripts python: exported-sql-viewer.py: Fix zero id in call tree 'Find' result perf scripts python: exported-sql-viewer.py: Fix zero id in call graph 'Find' result perf scripts python: exported-sql-viewer.py: Fix unexpanded 'Find' result perf record: Fix duplicated sideband events with Intel PT system wide tracing perf scripts python: export-to-postgresql.py: Fix struct.pack() int argument tools arch: Update arch/x86/lib/memcpy_64.S copy used in 'perf bench mem memcpy' perf flamegraph: Explicitly set utf-8 encoding
-
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linuxLinus Torvalds authored
Pull MTD fixes from Miquel Raynal: "MTD: - Set a missing master partition panic write flag Raw NAND: - Fix build issue in the xway driver - Fix a wrong return code" * tag 'mtd/fixes-for-5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: mtd: rawnand: xway: Fix build issue mtd: set master partition panic write flag nandsim: Fix return code testing of ns_find_operation()
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fixes from David Sterba: - regression fix of a leak in global block reserve accounting - fix a (hard to hit) race of readahead vs releasepage that could lead to crash - convert all remaining uses of comment fall through annotations to the pseudo keyword - fix crash when mounting a fuzzed image with -o recovery * tag 'for-5.8-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: reset tree root pointer after error in init_tree_roots btrfs: fix reclaim_size counter leak after stealing from global reserve btrfs: fix fatal extent_buffer readahead vs releasepage race btrfs: convert comments to fallthrough annotations
-
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arcLinus Torvalds authored
Pull ARC fixes from Vineet Gupta: - User build systems to pass -mcpu - Fix potential EFA clobber in syscall handler - Fix ARCompact 2 levels of interrupts build - Detect newer HS CPU releases - misc other fixes * tag 'arc-5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARCv2: support loop buffer (LPB) disabling ARC: build: remove deprecated toggle for arc700 builds ARC: build: allow users to specify -mcpu ARCv2: boot log: detect newer/upconing HS3x/HS4x releases ARC: elf: use right ELF_ARCH ARC: [arcompact] fix bitrot with 2 levels of interrupt ARC: entry: fix potential EFA clobber when TIF_SYSCALL_TRACE
-
git://git.infradead.org/users/jjs/linux-tpmddLinus Torvalds authored
Pull tpm fix from Jarkko Sakkinen: "Revert commit e918e570 ("tpm_tis: Remove the HID IFX0102"). Removing IFX0102 from tpm_tis was not a right move because both tpm_tis and tpm_infineon use the same device ID. A real fix requires quirks added to both drivers. It can probably wait until v5.9 as the bug has existed since 2006" * tag 'tpmdd-next-v5.8-rc5' of git://git.infradead.org/users/jjs/linux-tpmdd: Revert commit e918e570 ("tpm_tis: Remove the HID IFX0102")
-
Sven Schnelle authored
Add the s390 idle functions so they don't show up in top when using software sampling. Signed-off-by:
Sven Schnelle <svens@linux.ibm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Igor Lubashev <ilubashe@akamai.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kim Phillips <kim.phillips@amd.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Link: http://lore.kernel.org/lkml/20200707171457.85707-1-svens@linux.ibm.comSigned-off-by:
-
Miquel Raynal authored
This MIPS driver does not support COMPILE_TEST yet and failed to build under my radar. Replace 'mtd' chich is not defined in the scope of xway_nand_remove() by nand_to_mtd(chip). The mistake has been added in the long series dropping nand_release(). Tested with a 7.3.0 MIPS GCC toolchain built with Buildroot. Fixes: 9fdd78f7 ("mtd: rawnand: xway: Stop using nand_release()") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200626065511.16424-1-miquel.raynal@bootlin.com
-
Jarkko Sakkinen authored
Removing IFX0102 from tpm_tis was not a right move because both tpm_tis and tpm_infineon use the same device ID. Revert the commit and add a remark about a bug caused by commit 93e1b7d4 ("[PATCH] tpm: add HID module parameter"). Fixes: e918e570 ("tpm_tis: Remove the HID IFX0102") Reported-by:
Peter Huewe <peterhuewe@gmx.de> Reviewed-by:
Jerry Snitselaar <jsnitsel@redhat.com> Signed-off-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
-
- 06 Jul, 2020 19 commits
-
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm fixes from Paolo Bonzini: "Bugfixes and a one-liner patch to silence a sparse warning" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: arm64: Stop clobbering x0 for HVC_SOFT_RESTART KVM: arm64: PMU: Fix per-CPU access in preemptible context KVM: VMX: Use KVM_POSSIBLE_CR*_GUEST_BITS to initialize guest/host masks KVM: x86: Mark CR4.TSD as being possibly owned by the guest KVM: x86: Inject #GP if guest attempts to toggle CR4.LA57 in 64-bit mode kvm: use more precise cast and do not drop __user KVM: x86: bit 8 of non-leaf PDPEs is not reserved KVM: X86: Fix async pf caused null-ptr-deref KVM: arm64: vgic-v4: Plug race between non-residency and v4.1 doorbell KVM: arm64: pvtime: Ensure task delay accounting is enabled KVM: arm64: Fix kvm_reset_vcpu() return code being incorrect with SVE KVM: arm64: Annotate hyp NMI-related functions as __always_inline KVM: s390: reduce number of IO pins to 1
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 fixes from Heiko Carstens: - Initialize jump labels before early command line parsing in order to make init_on_alloc and init_on_free options work - Fix vfio-ccw build error due to missing include - Prevent callchain data collection with hardware sampling, since the callchains simply do not exist - Prevent multiple registrations of the same zPCI function - Update defconfigs * tag 's390-5.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: vfio-ccw: Fix a build error due to missing include of linux/slab.h s390: update defconfigs s390/cpum_sf: prohibit callchain data collection s390/setup: init jump labels before command line parsing s390/maccess: add no DAT mode to kernel_write s390/pci: fix enabling a reserved PCI function
-
Paolo Bonzini authored
Merge tag 'kvmarm-fixes-5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master KVM/arm fixes for 5.8, take #3 - Disable preemption on context-switching PMU EL0 state happening on system register trap - Don't clobber X0 when tearing down KVM via a soft reset (kexec)
-
Kajol Jain authored
Added nest imc metric events. Signed-off-by:
Kajol Jain <kjain@linux.ibm.com> Acked-by:
-
Arnaldo Carvalho de Melo authored
Fixing the common case of: perf record perf report And getting just the cycles events. We now have a 'dummy' event to get perf metadata events that take place while we synthesize metadata records for pre-existing processes by traversing procfs, so we always have this extra 'dummy' evsel, but we don't have to offer it as there will be no samples on it, remove this distraction. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/lkml/20200706115452.GA2772@redhat.com/Signed-off-by:
-
Adrian Hunter authored
The condition to add XMM registers was missing, the regs array needed to be in the outer scope, and the size of the regs array was too small. Fixes: 143d34a6 ("perf intel-pt: Add XMM registers to synthesized PEBS sample") Signed-off-by:
-
Adrian Hunter authored
After recording PEBS-via-PT, perf script will not accept 'iregs' field e.g. # perf record -c 10000 -e '{intel_pt/branch=0/,branch-loads/aux-output/ppp}' -I -- ls -l ... [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.062 MB perf.data ] # ./perf script --itrace=eop -F+iregs Samples for 'dummy:u' event do not have IREGS attribute set. Cannot print 'iregs' field. Fix by using allow_user_set, which is true when recording AUX area data. Fixes: 9e64cefe ("perf intel-pt: Process options for PEBS event synthesis") Signed-off-by: -
Adrian Hunter authored
When recording PEBS-via-PT, the kernel will not accept the intel_pt event with register sampling e.g. # perf record --kcore -c 10000 -e '{intel_pt/branch=0/,branch-loads/aux-output/ppp}' -I -- ls -l Error: intel_pt/branch=0/: PMU Hardware doesn't support sampling/overflow-interrupts. Try 'perf stat' Fix by suppressing register sampling on the intel_pt evsel. Committer notes: Adrian informed that this is only available from Tremont onwards, so on older processors the error continues the same as before. Fixes: 9e64cefe ("perf intel-pt: Process options for PEBS event synthesis") Signed-off-by: -
Wei Li authored
The segmentation fault can be reproduced as following steps: 1) Executing perf report in tui. 2) Typing '/xxxxx' to filter the symbol to get nothing matched. 3) Pressing enter with no entry selected. Then it will report a segmentation fault. It is caused by the lack of check of browser->he_selection when accessing it's member res_samples in perf_evsel__hists_browse(). These processes are meaningful for specified samples, so we can skip these when nothing is selected. Fixes: 4968ac8f ("perf report: Implement browsing of individual samples") Signed-off-by:
Wei Li <liwei391@huawei.com> Acked-by:
Namhyung Kim <namhyung@kernel.org> Tested-by:
-
Jan Kiszka authored
On AMD, exist code -1 is also a possible value, but we use it for terminating the list of known exit reasons. This leads to EXIT_ERR being reported for unkown ones. Fix this by using an NULL string pointer as terminal. Link: http://lkml.kernel.org/r/5741D817.3070902@web.de Link: http://lore.kernel.org/linux-trace-devel/20200702174950.123454-7-tz.stoyanov@gmail.comSigned-off-by:
Jan Kiszka <jan.kiszka@siemens.com> [ Ported from trace-cmd.git ] Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: linux-trace-devel@vger.kernel.org Link: http://lore.kernel.org/lkml/20200702185705.759824282@goodmis.orgSigned-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com> Signed-off-by:
-
Steven Rostedt (VMware) authored
Replaced COPYING with a description of how the SPDX identifiers are used. Added a GPL-2.0 and LGPL-2.1 license file in the new LICENSES directory. Then removed all the license templates from the source files and replaced them with the corresponding SPDX identifier. Link: http://lore.kernel.org/linux-trace-devel/20200702174950.123454-6-tz.stoyanov@gmail.comSigned-off-by:
-
Steven Rostedt (VMware) authored
When something is written into trace_marker_raw, it goes in as a binary. But the printk_fmt() of the event that is created (raw_data)'s format file only prints the first byte of data: print fmt: "id:%04x %08x", REC->id, (int)REC->buf[0] This is not very useful if we want to see the full data output. Implement the processing of the raw_data event like it is in the kernel. Link: http://lore.kernel.org/linux-trace-devel/20200702174950.123454-5-tz.stoyanov@gmail.comSigned-off-by:
-
Tzvetomir Stoyanov (VMware) authored
The "kernel_stack" event handler does not depend on any trace-cmd context, it can be used aside from the application. The code is moved to libtraceevent "function" plugin. Link: http://lore.kernel.org/linux-trace-devel/20190726124308.18735-2-tz.stoyanov@gmail.com Link: http://lore.kernel.org/linux-trace-devel/20200702174950.123454-4-tz.stoyanov@gmail.comSigned-off-by:
-
Julia Cartwright authored
The futex syscall is a complicated one. It supports thirteen multiplexed operations, each with different semantics and encodings for the syscalls six arguments. Manually decoding these arguments is tedious and error prone. This plugin provides symbolic names for futex operations, futex flags, and tries to be intelligent about the intent of specific arguments (for example, waking operations use 'val' as an integer count, not just an arbitrary value). It doesn't do a full decode of the FUTEX_WAKE_OP's 'val3' argument, however, this is a good starting point. Link: http://lkml.kernel.org/r/20171207025649.12160-1-julia@ni.com Link: http://lore.kernel.org/linux-trace-devel/20200702174950.123454-3-tz.stoyanov@gmail.comSigned-off-by:
Julia Cartwright <julia@ni.com> [ Ported from trace-cmd.git ] Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: linux-trace-devel@vger.kernel.org Link: http://lore.kernel.org/lkml/20200702185705.127175788@goodmis.orgSigned-off-by:
-
Steven Rostedt (VMware) authored
When the offset option is set for the function plugin enabled, it will display the offset of the functions along with their names. This helps in finding exactly where a function was called by its parent. trace-cmd report -O parent -O offset [..] rcuc/163-1330 [163] 740.653251: function: _raw_spin_lock+0x0 <-- rcu_cpu_kthread+0x4d8 Link: http://lore.kernel.org/linux-trace-devel/20200702174950.123454-2-tz.stoyanov@gmail.comSigned-off-by: -
Jan Kiszka authored
Exceptions require individual decoding (only feasible intercepts listed), XSETBV was missing and the AVIC brought in two new exit codes. Link: http://lkml.kernel.org/r/5741D822.3030203@web.de Link: http://lore.kernel.org/linux-trace-devel/20200625100516.365338-10-tz.stoyanov@gmail.comSigned-off-by:
-
Steven Rostedt (Red Hat) authored
The tlb_flush tracepoints uses enums that are not yet known by the traceevent library. Add a plugin to handle that. Link: http://lore.kernel.org/linux-trace-devel/20200625100516.365338-9-tz.stoyanov@gmail.comSigned-off-by:
-
Tzvetomir Stoyanov (VMware) authored
Each time the pretty_print() function is called to print an event, the event's format string is parsed. As this format string does not change, this parsing can be done only once - when the event struct is initialized. Link: https://lore.kernel.org/linux-trace-devel/20200529134929.537110-1-tz.stoyanov@gmail.com Link: http://lore.kernel.org/linux-trace-devel/20200625100516.365338-8-tz.stoyanov@gmail.comSigned-off-by:
-
Tzvetomir Stoyanov (VMware) authored
The printk format specifiers used in event's print format files extend the standard printf formats. There are a lot of new options related to printing pointers and kernel specific structures. Currently trace-cmd does not support many of them. Support for these new printk specifiers is added to the pretty_print() function: - UUID/GUID address: %pU[bBlL] - Raw buffer as a hex string: %*ph[CDN] These are improved: - MAC address: %pMF, %pM and %pmR - IPv4 adderss: %p[Ii]4[hnbl] Function pretty_print() is refactored. The logic for printing pointers %p[...] is moved to its own function. Link: https://lore.kernel.org/linux-trace-devel/20200515053754.3695335-1-tz.stoyanov@gmail.com Link: http://lore.kernel.org/linux-trace-devel/20200625100516.365338-7-tz.stoyanov@gmail.com Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=207605Reported-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
