- 06 Mar, 2015 15 commits
-
-
Eric Farman authored
We finally have all the pieces in place, so let's include the vector facility bit in the mask of available hardware facilities for the guest to recognize. Also, enable the vector functionality in the guest control blocks, to avoid a possible vector data exception that would otherwise occur when a vector instruction is issued by the guest operating system. Signed-off-by:
Eric Farman <farman@linux.vnet.ibm.com> Reviewed-by:
Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com>
-
Eric Farman authored
Store additional status in the machine check handler, in order to collect status (such as vector registers) that is not defined by store status. Signed-off-by:
David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by:
Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by:
-
Eric Farman authored
The new SIGP order Store Additional Status at Address is totally handled by user space, but we should still record the occurrence of this order in the kernel code. Signed-off-by:
-
Eric Farman authored
A new exception type for vector instructions is introduced with the new processor, but is handled exactly like a Data Exception which is already handled by the system. Signed-off-by:
-
Eric Farman authored
Define and allocate space for both the host and guest views of the vector registers for a given vcpu. The 32 vector registers occupy 128 bits each (512 bytes total), but architecturally are paired with 512 additional bytes of reserved space for future expansion. The kvm_sync_regs structs containing the registers are union'ed with 1024 bytes of padding in the common kvm_run struct. The addition of 1024 bytes of new register information clearly exceeds the existing union, so an expansion of that padding is required. When changing environments, we need to appropriately save and restore the vector registers viewed by both the host and guest, into and out of the sync_regs space. The floating point registers overlay the upper half of vector registers 0-15, so there's a bit of data duplication here that needs to be carefully avoided. Signed-off-by:
-
Alexander Yarygin authored
The guest debug functions work on absolute addresses and should use the read_guest_abs() function rather than general read_guest() that works with logical addresses. Cc: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by:
Alexander Yarygin <yarygin@linux.vnet.ibm.com> Reviewed-by:
-
David Hildenbrand authored
trace-cmd fails to parse the instruction interception trace point: "Error: expected type 5 but read 4 failed to read event print fmt for kvm_s390_intercept_instruction" The result is an unformatted string in the output, with a warning: "kvm_s390_intercept_instruction: [FAILED TO PARSE]..." So let's add parentheses around the instruction parser macro to fix the format parsing. Acked-by:
-
Yannick Guerrini authored
Change 'architecuture' to 'architecture' Signed-off-by:
Yannick Guerrini <yguerrini@tomshardware.fr> Message-Id: <1424989004-14412-1-git-send-email-yguerrini@tomshardware.fr> Signed-off-by:
-
Michael Mueller authored
The function kvm_s390_vcpu_setup_model() now performs all cpu model realated setup tasks for a vcpu. Besides cpuid and ibc initialization, facility list assignment takes place during the setup step as well. The model setup has been pulled to the begin of vcpu setup to allow kvm facility tests. There is no need to protect the cpu model setup with a lock since the attributes can't be changed anymore as soon the first vcpu is online. Signed-off-by:
Michael Mueller <mimu@linux.vnet.ibm.com> Signed-off-by:
-
Thomas Huth authored
The common s390 function insn_length() results in slightly smaller (and thus hopefully faster) code than the calculation of the instruction length via a lookup-table. So let's use that function in the interrupt delivery code, too. Signed-off-by:
Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by:
-
Thomas Huth authored
When the SIE exited by a DAT access exceptions which we can not resolve, the guest tried to access a page which is out of bounds and can not be paged-in. In this case we have to signal the bad access by injecting an address exception. However, address exceptions are either suppressing or terminating, i.e. the PSW has to point to the next instruction when the exception is delivered. Since the originating DAT access exception is nullifying, the PSW still points to the offending instruction instead, so we've got to forward the PSW to the next instruction. Having fixed this issue, we can now also enable the TPROT interpretation facility again which had been disabled because of this problem. Signed-off-by:
-
Thomas Huth authored
When certain program exceptions (e.g. DAT access exceptions) occur, the current instruction has to be nullified, i.e. the old PSW that gets written into the low-core has to point to the beginning of the instruction again, and not to the beginning of the next instruction. Thus we have to rewind the PSW before writing it into the low-core. The list of nullifying exceptions can be found in the POP, chapter 6, figure 6-1 ("Interruption Action"). Signed-off-by: -
David Hildenbrand authored
The reinjection of an I/O interrupt can fail if the list is at the limit and between the dequeue and the reinjection, another I/O interrupt is injected (e.g. if user space floods kvm with I/O interrupts). This patch avoids this memory leak and returns -EFAULT in this special case. This error is not recoverable, so let's fail hard. This can later be avoided by not dequeuing the interrupt but working directly on the locked list. Signed-off-by:
-
David Hildenbrand authored
If the I/O interrupt could not be written to the guest provided area (e.g. access exception), a program exception was injected into the guest but "inti" wasn't freed, therefore resulting in a memory leak. In addition, the I/O interrupt wasn't reinjected. Therefore the dequeued interrupt is lost. This patch fixes the problem while cleaning up the function and making the cc and rc logic easier to handle. Signed-off-by:
-
Ekaterina Tumanova authored
s390 documentation requires words 0 and 10-15 to be reserved and stored as zeros. As we fill out all other fields, we can memset the full structure. Signed-off-by:
Ekaterina Tumanova <tumanova@linux.vnet.ibm.com> Cc: stable@vger.kernel.org Reviewed-by:
-
- 04 Mar, 2015 4 commits
-
-
Michael Mueller authored
With patch "include guest facilities in kvm facility test" it is no longer necessary to have special handling for the non-LPAR case. Signed-off-by:
-
Michael Mueller authored
Most facility related decisions in KVM have to take into account: - the facilities offered by the underlying run container (LPAR/VM) - the facilities supported by the KVM code itself - the facilities requested by a guest VM This patch adds the KVM driver requested facilities to the test routine. It additionally renames struct s390_model_fac to kvm_s390_fac and its field names to be more meaningful. The semantics of the facilities stored in the KVM architecture structure is changed. The address arch.model.fac->list now points to the guest facility list and arch.model.fac->mask points to the KVM facility mask. This patch fixes the behaviour of KVM for some facilities for guests that ignore the guest visible facility bits, e.g. guests could use transactional memory intructions on hosts supporting them even if the chosen cpu model would not offer them. The userspace interface is not affected by this change. Signed-off-by:
-
Michael Mueller authored
The facility lists were not fully copied. Signed-off-by:
-
Christian Borntraeger authored
Under z/VM PQAP might trigger an operation exception if no crypto cards are defined via APVIRTUAL or APDEDICATED. [ 386.098666] Kernel BUG at 0000000000135c56 [verbose debug info unavailable] [ 386.098693] illegal operation: 0001 ilc:2 [#1] SMP [...] [ 386.098751] Krnl PSW : 0704c00180000000 0000000000135c56 (kvm_s390_apxa_installed+0x46/0x98) [...] [ 386.098804] [<000000000013627c>] kvm_arch_init_vm+0x29c/0x358 [ 386.098806] [<000000000012d008>] kvm_dev_ioctl+0xc0/0x460 [ 386.098809] [<00000000002c639a>] do_vfs_ioctl+0x332/0x508 [ 386.098811] [<00000000002c660e>] SyS_ioctl+0x9e/0xb0 [ 386.098814] [<000000000070476a>] system_call+0xd6/0x258 [ 386.098815] [<000003fffc7400a2>] 0x3fffc7400a2 Lets add an extable entry and provide a zeroed config in that case. Reported-by:
Stefan Zimmermann <stzi@linux.vnet.ibm.com> Signed-off-by:
-
- 03 Mar, 2015 1 commit
-
-
Tony Krowiak authored
z/VM and LPAR enable key wrapping by default, lets do the same on KVM. Signed-off-by:
Tony Krowiak <akrowiak@linux.vnet.ibm.com> Signed-off-by:
-
- 23 Feb, 2015 3 commits
-
-
Linus Torvalds authored
.. after extensive statistical analysis of my G+ polling, I've come to the inescapable conclusion that internet polls are bad. Big surprise. But "Hurr durr I'ma sheep" trounced "I like online polls" by a 62-to-38% margin, in a poll that people weren't even supposed to participate in. Who can argue with solid numbers like that? 5,796 votes from people who can't even follow the most basic directions? In contrast, "v4.0" beat out "v3.20" by a slimmer margin of 56-to-44%, but with a total of 29,110 votes right now. Now, arguably, that vote spread is only about 3,200 votes, which is less than the almost six thousand votes that the "please ignore" poll got, so it could be considered noise. But hey, I asked, so I'll honor the votes.
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fixes from Ted Ts'o: "Ext4 bug fixes. We also reserved code points for encryption and read-only images (for which the implementation is mostly just the reserved code point for a read-only feature :-)" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix indirect punch hole corruption ext4: ignore journal checksum on remount; don't fail ext4: remove duplicate remount check for JOURNAL_CHECKSUM change ext4: fix mmap data corruption in nodelalloc mode when blocksize < pagesize ext4: support read-only images ext4: change to use setup_timer() instead of init_timer() ext4: reserve codepoints used by the ext4 encryption feature jbd2: complain about descriptor block checksum errors
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull more vfs updates from Al Viro: "Assorted stuff from this cycle. The big ones here are multilayer overlayfs from Miklos and beginning of sorting ->d_inode accesses out from David" * 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (51 commits) autofs4 copy_dev_ioctl(): keep the value of ->size we'd used for allocation procfs: fix race between symlink removals and traversals debugfs: leave freeing a symlink body until inode eviction Documentation/filesystems/Locking: ->get_sb() is long gone trylock_super(): replacement for grab_super_passive() fanotify: Fix up scripted S_ISDIR/S_ISREG/S_ISLNK conversions Cachefiles: Fix up scripted S_ISDIR/S_ISREG/S_ISLNK conversions VFS: (Scripted) Convert S_ISLNK/DIR/REG(dentry->d_inode) to d_is_*(dentry) SELinux: Use d_is_positive() rather than testing dentry->d_inode Smack: Use d_is_positive() rather than testing dentry->d_inode TOMOYO: Use d_is_dir() rather than d_inode and S_ISDIR() Apparmor: Use d_is_positive/negative() rather than testing dentry->d_inode Apparmor: mediated_filesystem() should use dentry->d_sb not inode->i_sb VFS: Split DCACHE_FILE_TYPE into regular and special types VFS: Add a fallthrough flag for marking virtual dentries VFS: Add a whiteout dentry type VFS: Introduce inode-getting helpers for layered/unioned fs environments Infiniband: Fix potential NULL d_inode dereference posix_acl: fix reference leaks in posix_acl_create autofs4: Wrong format for printing dentry ...
-
- 22 Feb, 2015 17 commits
-
-
git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fix from Russell King: "Just one fix this time around. __iommu_alloc_buffer() can cause a BUG() if dma_alloc_coherent() is called with either __GFP_DMA32 or __GFP_HIGHMEM set. The patch from Alexandre addresses this" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8305/1: DMA: Fix kzalloc flags in __iommu_alloc_buffer()
-
Al Viro authored
X-Coverup: just ask spender Cc: stable@vger.kernel.org Signed-off-by:Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
use_pde()/unuse_pde() in ->follow_link()/->put_link() resp. Cc: stable@vger.kernel.org Signed-off-by: -
Al Viro authored
As it is, we have debugfs_remove() racing with symlink traversals. Supply ->evict_inode() and do freeing there - inode will remain pinned until we are done with the symlink body. And rip the idiocy with checking if dentry is positive right after we'd verified debugfs_positive(), which is a stronger check... Cc: stable@vger.kernel.org Signed-off-by: -
Al Viro authored
Signed-off-by: -
Konstantin Khlebnikov authored
I've noticed significant locking contention in memory reclaimer around sb_lock inside grab_super_passive(). Grab_super_passive() is called from two places: in icache/dcache shrinkers (function super_cache_scan) and from writeback (function __writeback_inodes_wb). Both are required for progress in memory allocator. Grab_super_passive() acquires sb_lock to increment sb->s_count and check sb->s_instances. It seems sb->s_umount locked for read is enough here: super-block deactivation always runs under sb->s_umount locked for write. Protecting super-block itself isn't a problem: in super_cache_scan() sb is protected by shrinker_rwsem: it cannot be freed if its slab shrinkers are still active. Inside writeback super-block comes from inode from bdi writeback list under wb->list_lock. This patch removes locking sb_lock and checks s_instances under s_umount: generic_shutdown_super() unlinks it under sb->s_umount locked for write. New variant is called trylock_super() and since it only locks semaphore, callers must call up_read(&sb->s_umount) instead of drop_super(sb) when they're done. Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by:
-
David Howells authored
Fanotify probably doesn't want to watch autodirs so make it use d_can_lookup() rather than d_is_dir() when checking a dir watch and give an error on fake directories. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
David Howells authored
Fix up the following scripted S_ISDIR/S_ISREG/S_ISLNK conversions (or lack thereof) in cachefiles: (1) Cachefiles mostly wants to use d_can_lookup() rather than d_is_dir() as it doesn't want to deal with automounts in its cache. (2) Coccinelle didn't find S_IS* expressions in ASSERT() statements in cachefiles. Signed-off-by: -
David Howells authored
Convert the following where appropriate: (1) S_ISLNK(dentry->d_inode) to d_is_symlink(dentry). (2) S_ISREG(dentry->d_inode) to d_is_reg(dentry). (3) S_ISDIR(dentry->d_inode) to d_is_dir(dentry). This is actually more complicated than it appears as some calls should be converted to d_can_lookup() instead. The difference is whether the directory in question is a real dir with a ->lookup op or whether it's a fake dir with a ->d_automount op. In some circumstances, we can subsume checks for dentry->d_inode not being NULL into this, provided we the code isn't in a filesystem that expects d_inode to be NULL if the dirent really *is* negative (ie. if we're going to use d_inode() rather than d_backing_inode() to get the inode pointer). Note that the dentry type field may be set to something other than DCACHE_MISS_TYPE when d_inode is NULL in the case of unionmount, where the VFS manages the fall-through from a negative dentry to a lower layer. In such a case, the dentry type of the negative union dentry is set to the same as the type of the lower dentry. However, if you know d_inode is not NULL at the call site, then you can use the d_is_xxx() functions even in a filesystem. There is one further complication: a 0,0 chardev dentry may be labelled DCACHE_WHITEOUT_TYPE rather than DCACHE_SPECIAL_TYPE. Strictly, this was intended for special directory entry types that don't have attached inodes. The following perl+coccinelle script was used: use strict; my @callers; open($fd, 'git grep -l \'S_IS[A-Z].*->d_inode\' |') || die "Can't grep for S_ISDIR and co. callers"; @callers = <$fd>; close($fd); unless (@callers) { print "No matches\n"; exit(0); } my @cocci = ( '@@', 'expression E;', '@@', '', '- S_ISLNK(E->d_inode->i_mode)', '+ d_is_symlink(E)', '', '@@', 'expression E;', '@@', '', '- S_ISDIR(E->d_inode->i_mode)', '+ d_is_dir(E)', '', '@@', 'expression E;', '@@', '', '- S_ISREG(E->d_inode->i_mode)', '+ d_is_reg(E)' ); my $coccifile = "tmp.sp.cocci"; open($fd, ">$coccifile") || die $coccifile; print($fd "$_\n") || die $coccifile foreach (@cocci); close($fd); foreach my $file (@callers) { chomp $file; print "Processing ", $file, "\n"; system("spatch", "--sp-file", $coccifile, $file, "--in-place", "--no-show-diff") == 0 || die "spatch failed"; } [AV: overlayfs parts skipped] Signed-off-by: -
David Howells authored
Use d_is_positive() rather than testing dentry->d_inode in SELinux to get rid of direct references to d_inode outside of the VFS. Signed-off-by:
-
David Howells authored
Use d_is_positive() rather than testing dentry->d_inode in Smack to get rid of direct references to d_inode outside of the VFS. Signed-off-by:
-
David Howells authored
Use d_is_dir() rather than d_inode and S_ISDIR(). Note that this will include fake directories such as automount triggers. Signed-off-by:
-
David Howells authored
Use d_is_positive(dentry) or d_is_negative(dentry) rather than testing dentry->d_inode as the dentry may cover another layer that has an inode when the top layer doesn't or may hold a 0,0 chardev that's actually a whiteout. Signed-off-by:
-
David Howells authored
mediated_filesystem() should use dentry->d_sb not dentry->d_inode->i_sb and should avoid file_inode() also since it is really dealing with the path. Signed-off-by:
-
David Howells authored
Split DCACHE_FILE_TYPE into DCACHE_REGULAR_TYPE (dentries representing regular files) and DCACHE_SPECIAL_TYPE (representing blockdev, chardev, FIFO and socket files). d_is_reg() and d_is_special() are added to detect these subtypes and d_is_file() is left as the union of the two. This allows a number of places that use S_ISREG(dentry->d_inode->i_mode) to use d_is_reg(dentry) instead. Signed-off-by:
-
David Howells authored
Add a DCACHE_FALLTHRU flag to indicate that, in a layered filesystem, this is a virtual dentry that covers another one in a lower layer that should be used instead. This may be recorded on medium if directory integration is stored there. The flag can be set with d_set_fallthru() and tested with d_is_fallthru(). Original-author: Valerie Aurora <vaurora@redhat.com> Signed-off-by:
-
David Howells authored
Add DCACHE_WHITEOUT_TYPE and provide a d_is_whiteout() accessor function. A d_is_miss() accessor is also added for ordinary cache misses and d_is_negative() is modified to indicate either an ordinary miss or an enforced miss (whiteout). Signed-off-by:
-
