Skip to content

L
linux
Switch branch/tag
  1. 17 May, 2023 6 commits
    • Marco Migliore's avatar
      net: dsa: mv88e6xxx: Fix mv88e6393x EPC write command offset · 1323e0c6
      Marco Migliore authored 
      According to datasheet, the command opcode must be specified
into bits [14:12] of the Extended Port Control register (EPC).

Fixes: de776d0d ("net: dsa: mv88e6xxx: add support for mv88e6393x family")
Signed-off-by: default avatarMarco Migliore <m.migliore@tiesse.com>
Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1323e0c6
    • Christophe JAILLET's avatar
      cassini: Fix a memory leak in the error handling path of cas_init_one() · 412cd77a
      Christophe JAILLET authored 
      cas_saturn_firmware_init() allocates some memory using vmalloc(). This
memory is freed in the .remove() function but not it the error handling
path of the probe.

Add the missing vfree() to avoid a memory leak, should an error occur.

Fixes: fcaa4066 ("cassini: use request_firmware")
Signed-off-by: default avatarChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: default avatarPavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: default avatarSimon Horman <simon.horman@corigine.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      412cd77a
    • Kuniyuki Iwashima's avatar
      tun: Fix memory leak for detached NAPI queue. · 82b2bc27
      Kuniyuki Iwashima authored 
      syzkaller reported [0] memory leaks of sk and skb related to the TUN
device with no repro, but we can reproduce it easily with:

  struct ifreq ifr = {}
  int fd_tun, fd_tmp;
  char buf[4] = {};

  fd_tun = openat(AT_FDCWD, "/dev/net/tun", O_WRONLY, 0);
  ifr.ifr_flags = IFF_TUN | IFF_NAPI | IFF_MULTI_QUEUE;
  ioctl(fd_tun, TUNSETIFF, &ifr);

  ifr.ifr_flags = IFF_DETACH_QUEUE;
  ioctl(fd_tun, TUNSETQUEUE, &ifr);

  fd_tmp = socket(AF_PACKET, SOCK_PACKET, 0);
  ifr.ifr_flags = IFF_UP;
  ioctl(fd_tmp, SIOCSIFFLAGS, &ifr);

  write(fd_tun, buf, sizeof(buf));
  close(fd_tun);

If we enable NAPI and multi-queue on a TUN device, we can put skb into
tfile->sk.sk_write_queue after the queue is detached.  We should prevent
it by checking tfile->detached before queuing skb.

Note this must be done under tfile->sk.sk_write_queue.lock because write()
and ioctl(IFF_DETACH_QUEUE) can run concurrently.  Otherwise, there would
be a small race window:

  write()                             ioctl(IFF_DETACH_QUEUE)
  `- tun_get_user                     `- __tun_detach
     |- if (tfile->detached)             |- tun_disable_queue
     |  `-> false                        |  `- tfile->detached = tun
     |                                   `- tun_queue_purge
     |- spin_lock_bh(&queue->lock)
     `- __skb_queue_tail(queue, skb)

Another solution is to call tun_queue_purge() when closing and
reattaching the detached queue, but it could paper over another
problems.  Also, we do the same kind of test for IFF_NAPI_FRAGS.

[0]:
unreferenced object 0xffff88801edbc800 (size 2048):
  comm "syz-executor.1", pid 33269, jiffies 4295743834 (age 18.756s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 07 40 00 00 00 00 00 00 00 00 00 00 00 00  ...@............
  backtrace:
    [<000000008c16ea3d>] __do_kmalloc_node mm/slab_common.c:965 [inline]
    [<000000008c16ea3d>] __kmalloc+0x4a/0x130 mm/slab_common.c:979
    [<000000003addde56>] kmalloc include/linux/slab.h:563 [inline]
    [<000000003addde56>] sk_prot_alloc+0xef/0x1b0 net/core/sock.c:2035
    [<000000003e20621f>] sk_alloc+0x36/0x2f0 net/core/sock.c:2088
    [<0000000028e43843>] tun_chr_open+0x3d/0x190 drivers/net/tun.c:3438
    [<000000001b0f1f28>] misc_open+0x1a6/0x1f0 drivers/char/misc.c:165
    [<000000004376f706>] chrdev_open+0x111/0x300 fs/char_dev.c:414
    [<00000000614d379f>] do_dentry_open+0x2f9/0x750 fs/open.c:920
    [<000000008eb24774>] do_open fs/namei.c:3636 [inline]
    [<000000008eb24774>] path_openat+0x143f/0x1a30 fs/namei.c:3791
    [<00000000955077b5>] do_filp_open+0xce/0x1c0 fs/namei.c:3818
    [<00000000b78973b0>] do_sys_openat2+0xf0/0x260 fs/open.c:1356
    [<00000000057be699>] do_sys_open fs/open.c:1372 [inline]
    [<00000000057be699>] __do_sys_openat fs/open.c:1388 [inline]
    [<00000000057be699>] __se_sys_openat fs/open.c:1383 [inline]
    [<00000000057be699>] __x64_sys_openat+0x83/0xf0 fs/open.c:1383
    [<00000000a7d2182d>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
    [<00000000a7d2182d>] do_syscall_64+0x3c/0x90 arch/x86/entry/common.c:80
    [<000000004cc4e8c4>] entry_SYSCALL_64_after_hwframe+0x72/0xdc

unreferenced object 0xffff88802f671700 (size 240):
  comm "syz-executor.1", pid 33269, jiffies 4295743854 (age 18.736s)
  hex dump (first 32 bytes):
    68 c9 db 1e 80 88 ff ff 68 c9 db 1e 80 88 ff ff  h.......h.......
    00 c0 7b 2f 80 88 ff ff 00 c8 db 1e 80 88 ff ff  ..{/............
  backtrace:
    [<00000000e9d9fdb6>] __alloc_skb+0x223/0x250 net/core/skbuff.c:644
    [<000000002c3e4e0b>] alloc_skb include/linux/skbuff.h:1288 [inline]
    [<000000002c3e4e0b>] alloc_skb_with_frags+0x6f/0x350 net/core/skbuff.c:6378
    [<00000000825f98d7>] sock_alloc_send_pskb+0x3ac/0x3e0 net/core/sock.c:2729
    [<00000000e9eb3df3>] tun_alloc_skb drivers/net/tun.c:1529 [inline]
    [<00000000e9eb3df3>] tun_get_user+0x5e1/0x1f90 drivers/net/tun.c:1841
    [<0000000053096912>] tun_chr_write_iter+0xac/0x120 drivers/net/tun.c:2035
    [<00000000b9282ae0>] call_write_iter include/linux/fs.h:1868 [inline]
    [<00000000b9282ae0>] new_sync_write fs/read_write.c:491 [inline]
    [<00000000b9282ae0>] vfs_write+0x40f/0x530 fs/read_write.c:584
    [<00000000524566e4>] ksys_write+0xa1/0x170 fs/read_write.c:637
    [<00000000a7d2182d>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
    [<00000000a7d2182d>] do_syscall_64+0x3c/0x90 arch/x86/entry/common.c:80
    [<000000004cc4e8c4>] entry_SYSCALL_64_after_hwframe+0x72/0xdc

Fixes: cde8b15f ("tuntap: add ioctl to attach or detach a file form tuntap device")
Reported-by: default avatarsyzkaller <syzkaller@googlegroups.com>
Signed-off-by: default avatarKuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      82b2bc27
    • Jakub Kicinski's avatar
      Merge tag 'ipsec-2023-05-16' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec · 6ad85ed0
      Jakub Kicinski authored 
      Steffen Klassert says:

====================
pull request (net): ipsec 2023-05-16

1) Don't check the policy default if we have an allow
   policy. Fix from Sabrina Dubroca.

2) Fix netdevice refount usage on offload.
   From Leon Romanovsky.

3) Use netdev_put instead of dev_puti to correctly release
   the netdev on failure in xfrm_dev_policy_add.
   From Leon Romanovsky.

4) Revert "Fix XFRM-I support for nested ESP tunnels"
   This broke Netfilter policy matching.
   From Martin Willi.

5) Reject optional tunnel/BEET mode templates in outbound policies
   on netlink and pfkey sockets. From Tobias Brunner.

6) Check if_id in inbound policy/secpath match to make
   it symetric to the outbound codepath.
   From Benedict Wong.

* tag 'ipsec-2023-05-16' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
  xfrm: Check if_id in inbound policy/secpath match
  af_key: Reject optional tunnel/BEET mode templates in outbound policies
  xfrm: Reject optional tunnel/BEET mode templates in outbound policies
  Revert "Fix XFRM-I support for nested ESP tunnels"
  xfrm: Fix leak of dev tracker
  xfrm: release all offloaded policy memory
  xfrm: don't check the default policy if the policy allows the packet
====================

Link: https://lore.kernel.org/r/20230516052405.2677554-1-steffen.klassert@secunet.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      6ad85ed0
    • Jakub Kicinski's avatar
      Merge tag 'linux-can-fixes-for-6.4-20230515' of... · 47d55c62
      Jakub Kicinski authored 
      Merge tag 'linux-can-fixes-for-6.4-20230515' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2023-05-15

The first 2 patches are by Oliver Hartkopp and allow the
MSG_CMSG_COMPAT flag for isotp and j1939.

The next patch is by Oliver Hartkopp, too and adds missing CAN XL
support in can_put_echo_skb().

Geert Uytterhoeven's patch let's the bxcan driver depend on
ARCH_STM32.

The last 5 patches are from Dario Binacchi and also affect the bxcan
driver. The bxcan driver hit mainline with v6.4-rc1 and was originally
written for IP cores containing 2 CAN interfaces with shared
resources. Dario's series updates the DT bindings and driver to
support IP cores with a single CAN interface instance as well as
adding the bxcan to the stm32f746's device tree.

* tag 'linux-can-fixes-for-6.4-20230515' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
  ARM: dts: stm32: add CAN support on stm32f746
  can: bxcan: add support for single peripheral configuration
  ARM: dts: stm32: add pin map for CAN controller on stm32f7
  ARM: dts: stm32f429: put can2 in secondary mode
  dt-bindings: net: can: add "st,can-secondary" property
  can: CAN_BXCAN should depend on ARCH_STM32
  can: dev: fix missing CAN XL support in can_put_echo_skb()
  can: j1939: recvmsg(): allow MSG_CMSG_COMPAT flag
  can: isotp: recvmsg(): allow MSG_CMSG_COMPAT flag
====================

Link: https://lore.kernel.org/r/20230515204722.1000957-1-mkl@pengutronix.deSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      47d55c62
    • Ido Schimmel's avatar
      devlink: Fix crash with CONFIG_NET_NS=n · d6352dae
      Ido Schimmel authored 
      '__net_initdata' becomes a no-op with CONFIG_NET_NS=y, but when this
option is disabled it becomes '__initdata', which means the data can be
freed after the initialization phase. This annotation is obviously
incorrect for the devlink net device notifier block which is still
registered after the initialization phase [1].

Fix this crash by removing the '__net_initdata' annotation.

[1]
general protection fault, probably for non-canonical address 0xcccccccccccccccc: 0000 [#1] PREEMPT SMP
CPU: 3 PID: 117 Comm: (udev-worker) Not tainted 6.4.0-rc1-custom-gdf0acdc5 #64
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc37 04/01/2014
RIP: 0010:notifier_call_chain+0x58/0xc0
[...]
Call Trace:
 <TASK>
 dev_set_mac_address+0x85/0x120
 dev_set_mac_address_user+0x30/0x50
 do_setlink+0x219/0x1270
 rtnl_setlink+0xf7/0x1a0
 rtnetlink_rcv_msg+0x142/0x390
 netlink_rcv_skb+0x58/0x100
 netlink_unicast+0x188/0x270
 netlink_sendmsg+0x214/0x470
 __sys_sendto+0x12f/0x1a0
 __x64_sys_sendto+0x24/0x30
 do_syscall_64+0x38/0x80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

Fixes: e93c9378 ("devlink: change per-devlink netdev notifier to static one")
Reported-by: default avatarMarek Szyprowski <m.szyprowski@samsung.com>
Closes: https://lore.kernel.org/netdev/600ddf9e-589a-2aa0-7b69-a438f833ca10@samsung.com/Tested-by: default avatarMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: default avatarIdo Schimmel <idosch@nvidia.com>
Reviewed-by: default avatarJiri Pirko <jiri@nvidia.com>
Reviewed-by: default avatarSimon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230515162925.1144416-1-idosch@nvidia.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      d6352dae
  3. 16 May, 2023 1 commit
  5. 15 May, 2023 19 commits
  7. 13 May, 2023 10 commits
  9. 12 May, 2023 4 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7