- 20 Jun, 2017 40 commits
-
-
Kishon Vijay Abraham I authored
In preparation for using the generic mmc binding for io regulator ("vqmmc"), use mmc_regulator_get_supply() to get vmmc and vqmmc regulators. Only if "vqmmc" regulator isn't found, fallback to use "vmmc_aux" regulator. Signed-off-by:Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org>
-
Kishon Vijay Abraham I authored
Do not initialize MMC regulators to NULL on error in omap_hsmmc driver similar to what is done in mmc_regulator_get_supply(). This is in preparation for using mmc_regulator_get_supply() to get MMC regulators. Signed-off-by:
-
Kishon Vijay Abraham I authored
commit 94647a30 ("ARM: dts: omap3-overo: Enable WiFi/BT combo") while enabling WiFi/BT combo added regulator to trigger the nReset signal of the Bluetooth module in vqmmc-supply. However BT should be handled by UART. Moreover "vqmmc" is not a defined binding for omap_hsmmc. While "vqmmc" in mmc2 hasn't caused any issues so far, mmc2 will start to mis-behave once omap_hsmmc defines "vqmmc" binding. Remove "vqmmc-supply" property in mmc2 here. Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Adrian Hunter authored
Drivers core will runtime suspend a device with no driver. That means the SDIO card will be runtime suspended as soon as it is added. It is then runtime resumed to add each function. That is entirely pointless, so add pm runtime get/put to keep the SDIO card runtime resumed until the function devices have been added. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
-
Adrian Hunter authored
The error path deletes the device by calling mmc_sdio_remove() which must be called without the host claimed. Simplify the error path so it does just that and add a comment about why we don't disable runtime PM. Signed-off-by:
-
Adrian Hunter authored
Add PCI ids and enhanced strobe support for Intel CNP. This is combined with GLK due to the pending CMDQ support which they both share. Signed-off-by:
-
Simon Horman authored
Update copyrights to reflect work by Wolfram Sang and myself since last year. Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Reviewed-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
-
Simon Horman authored
Use EXPORT_SYMBOL_GPL rather than the non _GPL variant as there seems to be no reason not to. Signed-off-by:
-
Simon Horman authored
Update files for tmio/sdhi MMC driver to reflect recent filename changes. Signed-off-by:
-
Hans de Goede authored
The acpi-subsys already calls acpi_bus_get_status() and checks that device->status.present is set before even registering the platform_device so out probe function will never get called if device->status.present is false and there is no need for this check. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
-
Wolfram Sang authored
To achieve that, we set the registers in the generic HW reset routine which gets called at both, init and resume. We also make sure to move SDIO initialization before reset gets called in probe(). Signed-off-by:
Masaharu Hayakawa <masaharu.hayakawa.ry@renesas.com> Signed-off-by:
-
Matthias Kraemer authored
This patch applies customized PCI_DEVICE_ macros to specify the pci_ids instead of open-coding them within the sdhci-pci driver. By introducing device specific macros the pci_ids table becomes much shorter and easier to comprehend than it would be possible using the generic version of the PCI_DEVICE_ macros. Signed-off-by:
Matthias Kraemer <matthiasmartinsson@gmail.com> Acked-by:
-
Benoît Thébaudeau authored
The SDHCI_QUIRK_NO_MULTIBLOCK quirk was used as a workaround for the ENGcm07207 erratum. However, it caused excruciatingly slow SD transfers (300 kB/s on average), and this erratum actually does not imply that multiple-block transfers are not supported, so this was overkill. The suggested workaround for this erratum is to set SYSCTL.RSTA, but the simple DAT line software reset (which resets the DMA circuit among others) triggered by sdhci_finish_data() in case of errors seems to be sufficient. Indeed, generating errors in a controlled manner on i.MX25 using the FEVT register right in the middle of read data transfers without this quirk shows that nothing is written to the buffer by the eSDHC past CMD12, and no extra Auto CMD12 is sent with AC12EN set, so the data transfers on AHB are properly aborted. For write data transfers, neither extra data nor extra Auto CMD12 is sent, as expected. Moreover, after intensive stress tests on i.MX25, removing SDHCI_QUIRK_NO_MULTIBLOCK seems to be safe. SDHCI_QUIRK_BROKEN_ADMA has nothing to do with ENGcm07207, so set ESDHC_FLAG_ERR004536 for the devices that had ESDHC_FLAG_ENGCM07207 set in order to continue getting SDHCI_QUIRK_BROKEN_ADMA. Signed-off-by:
Benoît Thébaudeau <benoit@wsystem.com> Acked-by:
Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
-
Benoît Thébaudeau authored
On i.MX, SYSCTL.SDCLKFS may always be set to 0 in order to make the SD clock frequency prescaler divide by 1 in SDR mode, even with the eSDHC. The previous minimum prescaler value of 2 in SDR mode with the eSDHC was a code remnant from PowerPC, which actually has this limitation on earlier revisions. In DDR mode, the prescaler can divide by up to 512. The maximum SD clock frequency in High Speed mode is 50 MHz. On i.MX25, this change makes it possible to get 48 MHz from the USB PLL (240 MHz / 5 / 1) instead of only 40 MHz from the USB PLL (240 MHz / 3 / 2) or 33.25 MHz from the AHB clock (133 MHz / 2 / 2). Signed-off-by:
-
Benoît Thébaudeau authored
On i.MX25, the eSDHC DAT line software reset (SYSCTL.RSTD) unexpectedly clears at least the data transfer width (PROCTL.DTW), which then results in data CRC errors. This behavior is not documented, but it has actually been observed. Consequently, the DAT line software resets triggered by sdhci.c in case of errors caused unrecoverable errors. Fix this by making sure that the DAT line software reset does not alter the Host Control register. This behavior being undocumented, it may also be present on other i.MX SoCs, so apply this fix for the whole i.MX family. Signed-off-by:
-
Benoît Thébaudeau authored
The eSDHC can only DMA from 32-bit-aligned addresses. This fixes the following test cases of mmc_test: 11: Badly aligned write 12: Badly aligned read 13: Badly aligned multi-block write 14: Badly aligned multi-block read Signed-off-by:
-
Benoît Thébaudeau authored
Fix various English mistakes and typos in comments and in printed strings. Signed-off-by:
-
Phong LE authored
The dma gpd dma_free_coherent call size in invalid. Fixes: 20848903 ("mmc: mediatek: Add Mediatek MMC driver") Signed-off-by:
Phong LE <ple@baylibre.com> Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
-
Gustavo A. R. Silva authored
Null check at line 1165: if (mrq->cmd), implies that mrq->cmd might be NULL. Add null checks before dereferencing pointer mrq->cmd in order to avoid any potential NULL pointer dereference. Addresses-Coverity-ID: 1408740 Tested-by:
Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by:
Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by:
-
Wolfram Sang authored
It is 'R-Car', not 'RCar'. No code or binding changes, only descriptive text. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
David Woods authored
Using the device_property interfaces allows mmc drivers to work on platforms which run on either device tree or ACPI. Signed-off-by:
David Woods <dwoods@mellanox.com> Reviewed-by:
Chris Metcalf <cmetcalf@mellanox.com> Cc: stable@vger.linux.org Signed-off-by:
-
David Woods authored
Using the device_property interfaces allows the dw_mmc driver to work on platforms which run on either device tree or ACPI. Signed-off-by:
Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by:
-
Shawn Lin authored
Add "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc" for dwmmc on rk3328 platform. Signed-off-by:
Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by:
-
Fabio Estevam authored
clk_prepare_enable() may fail, so we should better check its return value and propagate it in the case of error. Signed-off-by:
-
Wu Fengguang authored
drivers/mmc/core/block.c:1929:3-4: Unneeded semicolon Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci CC: Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
Ulf Hansson authored
The only reason to why the mmc block device driver needs to implements its own version of how to get the status of the card, is that it needs to specify a different amount of retries. Therefore add a new exported function which allows the caller to specify the number of retries and convert everybody to use it, as this simplifies the code. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Linus Walleij authored
This moves the boot partition lock command (issued from sysfs) into a custom block layer request, just like the ioctl()s, getting rid of yet another instance of mmc_get_card(). Since we now have two operations issuing special DRV_OP's, we rename the result variable ->drv_op_result. Tested by locking the boot partition from userspace: > cd /sys/devices/platform/soc/80114000.sdi4_per2/mmc_host/mmc3/ mmc3:0001/block/mmcblk3/mmcblk3boot0 > echo 1 > ro_lock_until_next_power_on [ 178.645324] mmcblk3boot1: Locking boot partition ro until next power on [ 178.652221] mmcblk3boot0: Locking boot partition ro until next power on Also tested this with a huge dd job in the background: it is now possible to lock the boot partitions on the card even under heavy I/O. Signed-off-by: -
Linus Walleij authored
We will need to access static functions above the pure block layer operations in the file, so move the driver operations issue function down so we can see all non-blocklayer symbols. Signed-off-by:
-
Linus Walleij authored
We will expand the DRV_OP usage, so we need to know which operation we're performing. Tag the operations with an enum:ed type and rename the function so it is clear that it deals with any command and put a switch statement in it. Currently only ioctls are supported. Signed-off-by:
-
Linus Walleij authored
Just as we can use blk_mq_rq_from_pdu() to get the per-request tag we can use blk_mq_rq_to_pdu() to get a request from a tag. Introduce a static inline helper so we are on the clear what is happening. Suggested-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Wolfram Sang authored
Signed-off-by:
-
Wolfram Sang authored
Signed-off-by:
-
Wolfram Sang authored
Plain code move with no changes. Needed for refactoring. Also, looks nicer if request and finish_request are next to each other. Reviewed-by:
-
Wolfram Sang authored
The obviously wrong comment was added in 2011 with commit df3ef2d3 ("mmc: protect the tmio_mmc driver against a theoretical race") but already obsoleted half a year later with commit b9269fdd ("mmc: tmio: fix recursive spinlock, don't schedule with interrupts disabled"). Fixes: b9269fdd ("mmc: tmio: fix recursive spinlock, don't schedule with interrupts disabled") Reviewed-by:
-
Wolfram Sang authored
Split handling mrq into a seperate function. We need to call it from another place soon. Reviewed-by:
-
Wolfram Sang authored
This part confused me and I had to read it twice until I got it. Let's follow the standard pattern to bail out if something is wrong and keep in the body of the function when everything is as expected. Reviewed-by:
-
Markus Elfring authored
Omit an extra message for memory allocation failures. This issue was detected by using the Coccinelle software. Link: http://events.linuxfoundation.org/sites/events/files/slides/LCJ16-Refactor_Strings-WSang_0.pdfSigned-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
-
Markus Elfring authored
Omit an extra message for a memory allocation failure. This issue was detected by using the Coccinelle software. Link: http://events.linuxfoundation.org/sites/events/files/slides/LCJ16-Refactor_Strings-WSang_0.pdfSigned-off-by:
-
Linus Walleij authored
commit cdf8a6fb "mmc: block: Introduce queue semantics" deleted the last user of mmc_req_is_special() and it was a horrible hack to classify requests as "special" or "not special" to begin with, so delete the helper. Signed-off-by:
-
Linus Walleij authored
This switches also the multiple-command ioctl() call to issue all ioctl()s through the block layer instead of going directly to the device. We extend the passed argument with an argument count and loop over all passed commands in the ioctl() issue function called from the block layer. By doing this we are again loosening the grip on the big host lock, since two calls to mmc_get_card()/mmc_put_card() are removed. Signed-off-by:
Avri Altman <Avri.Altman@sandisk.com>
-
