- 02 Feb, 2023 12 commits
-
-
Maximilian Luz authored
The target ID of the base hub is currently set to KIP (keyboard/ peripherals). However, even though it manages such devices with the KIP target ID, the base hub itself is actually accessed via the SAM target ID. So set it accordingly. Note that the target ID of the hub can be chosen arbitrarily and does not directly correspond to any physical or virtual component of the EC. This change is only a code improvement intended for consistency and clarity, it does not fix an actual bug. Signed-off-by:
Maximilian Luz <luzmaximilian@gmail.com> Link: https://lore.kernel.org/r/20221202223327.690880-10-luzmaximilian@gmail.comReviewed-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Maximilian Luz authored
Similar to the target category (TC), the target ID (TID) can be one value out of a small number of choices, given in enum ssam_ssh_tid. In the device ID macros, SSAM_SDEV() and SSAM_VDEV() we already use text expansion to, both, remove some textual clutter for the target category values and enforce that the value belongs to the known set. Now that we know the names for the target IDs, use the same trick for them as well. Also rename the SSAM_ANY_x macros to SSAM_SSH_x_ANY to better fit in. Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20221202223327.690880-9-luzmaximilian@gmail.comReviewed-by:
-
Maximilian Luz authored
Instead of hard-coding the target ID, use the respective enum ssam_ssh_tid value. Signed-off-by:
-
Maximilian Luz authored
Instead of hard-coding the target ID, use the respective enum ssam_ssh_tid value. Signed-off-by:
-
Maximilian Luz authored
Instead of hard-coding the target ID, use the respective enum ssam_ssh_tid value. Signed-off-by:
-
Maximilian Luz authored
Instead of hard-coding the target ID, use the respective enum ssam_ssh_tid value. Signed-off-by:
-
Maximilian Luz authored
Add command source and target IDs to trace events. Tracing support for the Surface Aggregator driver was originally implemented at a time when only two peers were known: Host and SAM. We now know that there are at least five, with three actively being used (Host, SAM, KIP; four with Debug if you want to count manually enabling that interface). So it makes sense to also explicitly name the peers involved when tracing. Signed-off-by:
-
Maximilian Luz authored
The `tid_in` and `tid_out` fields of the serial hub protocol command struct (struct ssh_command) are actually source and target IDs, indicating the peer from which the message originated and the peer for which it is intended. Change the naming of those fields accordingly and improve the protocol documentation. Additionally, introduce an enum containing all currently known peers, i.e. targets and sources. Signed-off-by:
-
Uwe Kleine-König authored
A remove callback just returning 0 is equivalent to no remove callback at all. So drop the useless function. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221213162359.651529-4-u.kleine-koenig@pengutronix.deReviewed-by:
-
Uwe Kleine-König authored
A remove callback just returning 0 is equivalent to no remove callback at all. So drop the useless function. Signed-off-by:
-
Uwe Kleine-König authored
A remove callback just returning 0 is equivalent to no remove callback at all. So drop the useless function. Signed-off-by:
Peter Kaestle <peter@piie.net> Link: https://lore.kernel.org/r/20221213162359.651529-2-u.kleine-koenig@pengutronix.deReviewed-by:
-
Hans de Goede authored
Add a DMI match for the CWI501 version of the Chuwi Vi8 tablet, pointing to the same chuwi_vi8_data as the existing CWI506 version DMI match. Signed-off-by:
-
- 30 Jan, 2023 8 commits
-
-
Hans de Goede authored
Reading the thinklight LED brightnes while the LED is on returns 255 (LED_FULL) but we advertise a max_brightness of 1, so this should be 1 (LED_ON). Fixes: db5e2a4c ("platform/x86: thinkpad_acpi: Fix max_brightness of thinklight") Signed-off-by:
-
Arnd Bergmann authored
Using the serio subsystem now requires the code to be reachable: x86_64-linux-ld: drivers/platform/x86/amd/pmc.o: in function `amd_pmc_suspend_handler': pmc.c:(.text+0x86c): undefined reference to `serio_bus' Add the usual dependency: as other users of serio use 'select' rather than 'depends on', use the same here. Fixes: 8e60615e ("platform/x86/amd: pmc: Disable IRQ1 wakeup for RN/CZN") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20230127093950.2368575-1-arnd@kernel.orgReviewed-by:
-
Hans de Goede authored
As soon as the first handler or sysfs file is registered the mutex may get used. Move the initialization to before any handler registration / sysfs file creation. Likewise move the destruction of the mutex to after all the de-initialization is done. Fixes: da5ce22d ("platform/x86/amd/pmf: Add support for PMF core layer") Signed-off-by:
-
Shyam Sundar S K authored
Every power mode of static power slider has its own AC and DC power settings. When the power source changes from AC to DC, corresponding DC thermals were not updated from PMF config store and this leads the system to always run on AC power settings. Fix it by registering with power_supply notifier and apply DC settings upon getting notified by the power_supply handler. Fixes: da5ce22d ("platform/x86/amd/pmf: Add support for PMF core layer") Suggested-by:
Patil Rajesh Reddy <Patil.Reddy@amd.com> Signed-off-by:
Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Reviewed-by:
Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20230125095936.3292883-6-Shyam-sundar.S-k@amd.comReviewed-by:
-
Shyam Sundar S K authored
By design PMF static slider will be set to BALANCED during init, but updating to corresponding thermal values from the PMF config store was missed, leading to improper settings getting propagated to PMFW. Fixes: 4c71ae41 ("platform/x86/amd/pmf: Add support SPS PMF feature") Suggested-by:
-
Shyam Sundar S K authored
Auto-mode thermal limits should be updated only after receiving the AMT event. But due to a bug in the older commit, these settings were getting applied during the auto-mode init. Fix this by removing amd_pmf_set_automode() during auto-mode initialization. Fixes: 3f5571d9 ("platform/x86/amd/pmf: Add support for Auto mode feature") Suggested-by:
-
Shyam Sundar S K authored
Add helper routine to check if the current platform profile is balanced mode and remove duplicate code occurrences. Signed-off-by:
-
Shyam Sundar S K authored
Add helper routine to update the static slider information and remove the duplicate code occurrences after this change. Signed-off-by:
-
- 25 Jan, 2023 1 commit
-
-
Mark Pearson authored
My last commit to fix profile mode displays on AMD platforms caused an issue on Intel platforms - sorry! In it I was reading the current functional mode (MMC, PSC, AMT) from the BIOS but didn't account for the fact that on some of our Intel platforms I use a different API which returns just the profile and not the functional mode. This commit fixes it so that on Intel platforms it knows the functional mode is always MMC. I also fixed a potential problem that a platform may try to set the mode for both MMC and PSC - which was incorrect. Tested on X1 Carbon 9 (Intel) and Z13 (AMD). Link: https://bugzilla.kernel.org/show_bug.cgi?id=216963 Fixes: fde5f74c ("platform/x86: thinkpad_acpi: Fix profile mode display in AMT mode") Cc: stable@vger.kernel.org Reviewed-by:
Mark Pearson <mpearson-lenovo@squebb.ca> Link: https://lore.kernel.org/r/20230124153623.145188-1-mpearson-lenovo@squebb.caReviewed-by:
-
- 24 Jan, 2023 10 commits
-
-
Hans de Goede authored
Some apple laptop models have an ACPI device with a HID of APP000B and that device has an IO resource (so it does not describe the new unsupported MMIO based gmux type), but there actually is no gmux in the laptop at all. The gmux_probe() function of the actual apple-gmux driver has code to detect this, this code has been factored out into a new apple_gmux_detect() helper in apple-gmux.h. Use this new function to fix acpi_video_get_backlight_type() wrongly returning apple_gmux as type on the following laptops: MacBookPro5,4 https://pastebin.com/8Xjq7RhS MacBookPro8,1 https://linux-hardware.org/?probe=e513cfbadb&log=dmesg MacBookPro9,2 https://bugzilla.kernel.org/attachment.cgi?id=278961 MacBookPro10,2 https://lkml.org/lkml/2014/9/22/657 MacBookPro11,2 https://forums.fedora-fr.org/viewtopic.php?id=70142 MacBookPro11,4 https://raw.githubusercontent.com/im-0/investigate-card-reader-suspend-problem-on-mbp11.4/mast Fixes: 21245df3 ("ACPI: video: Add Apple GMUX brightness control detection") Link: https://lore.kernel.org/platform-driver-x86/20230123113750.462144-1-hdegoede@redhat.com/Reported-by:
Emmanouil Kouroupakis <kartebi@gmail.com> Acked-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Hans de Goede authored
Add a new (static inline) apple_gmux_detect() helper to apple-gmux.h which can be used for gmux detection instead of apple_gmux_present(). The latter is not really reliable since an ACPI device with a HID of APP000B is present on some devices without a gmux at all, as well as on devices with a newer (unsupported) MMIO based gmux model. This causes apple_gmux_present() to return false-positives on a number of different Apple laptop models. This new helper uses the same probing as the actual apple-gmux driver, so that it does not return false positives. To avoid code duplication the gmux_probe() function of the actual driver is also moved over to using the new apple_gmux_detect() helper. This avoids false positives (vs _HID + IO region detection) on: MacBookPro5,4 https://pastebin.com/8Xjq7RhS MacBookPro8,1 https://linux-hardware.org/?probe=e513cfbadb&log=dmesg MacBookPro9,2 https://bugzilla.kernel.org/attachment.cgi?id=278961 MacBookPro10,2 https://lkml.org/lkml/2014/9/22/657 MacBookPro11,2 https://forums.fedora-fr.org/viewtopic.php?id=70142 MacBookPro11,4 https://raw.githubusercontent.com/im-0/investigate-card-reader-suspend-problem-on-mbp11.4/master/test-16/dmesg Fixes: 21245df3 ("ACPI: video: Add Apple GMUX brightness control detection") Link: https://lore.kernel.org/platform-driver-x86/20230123113750.462144-1-hdegoede@redhat.com/Reported-by:
-
Hans de Goede authored
This is a preparation patch for adding a new static inline apple_gmux_detect() helper which actually checks a supported gmux is present, rather then only checking an ACPI device with the HID is there as apple_gmux_present() does. Fixes: 21245df3 ("ACPI: video: Add Apple GMUX brightness control detection") Link: https://lore.kernel.org/platform-driver-x86/20230123113750.462144-1-hdegoede@redhat.com/Reported-by:
-
Hans de Goede authored
Fix the following compiler warning: drivers/platform/x86/hp/hp-wmi.c:551:24: warning: cast to smaller integer type 'enum hp_wmi_radio' from 'void *' [-Wvoid-pointer-to-enum-cast] Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
Mario Limonciello authored
Some users may want to live with the bugs that exist in platform firmware and have workarounds in AMD PMC driver. To allow them to bypass these workarounds, introduce a module parameter. Signed-off-by:
-
Mario Limonciello authored
By default when the system is configured for low power idle in the FADT the keyboard is set up as a wake source. This matches the behavior that Windows uses for Modern Standby as well. It has been reported that a variety of AMD based designs there are spurious wakeups are happening where two IRQ sources are active. For example: ``` PM: Triggering wakeup from IRQ 9 PM: Triggering wakeup from IRQ 1 ``` In these designs IRQ 9 is the ACPI SCI and IRQ 1 is the keyboard. One way to trigger this problem is to suspend the laptop and then unplug the AC adapter. The SOC will be in a hardware sleep state and plugging in the AC adapter returns control to the kernel's s2idle loop. Normally if just IRQ 9 was active the s2idle loop would advance any EC transactions and no other IRQ being active would cause the s2idle loop to put the SOC back into hardware sleep state. When this bug occurred IRQ 1 is also active even if no keyboard activity occurred. This causes the s2idle loop to break and the system to wake. This is a platform firmware bug triggering IRQ1 without keyboard activity. This occurs in Windows as well, but Windows will enter "SW DRIPS" and then with no activity enters back into "HW DRIPS" (hardware sleep state). This issue affects Renoir, Lucienne, Cezanne, and Barcelo platforms. It does not happen on newer systems such as Mendocino or Rembrandt. It's been fixed in newer platform firmware. To avoid triggering the bug on older systems check the SMU F/W version and adjust the policy at suspend time for s2idle wakeup from keyboard on these systems. A lot of thought and experimentation has been given around the timing of disabling IRQ1, and to make it work the "suspend" PM callback is restored. Reported-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Reported-by:
Xaver Hugl <xaver.hugl@gmail.com> Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2115 Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1951Signed-off-by:
-
Hans de Goede authored
Commit 1ea0d3b4 ("platform/x86: asus-wmi: Simplify tablet-mode-switch handling") unified the asus-wmi tablet-switch handling, but it did not take into account that the value returned for the kbd_dock_devid WMI method is inverted where as the other ones are not inverted. This causes asus-wmi to report an inverted tablet-switch state for devices which use the kbd_dock_devid, which causes libinput to ignore touchpad events while the affected T10x model 2-in-1s are docked. Add inverting of the return value in the kbd_dock_devid case to fix this. Fixes: 1ea0d3b4 ("platform/x86: asus-wmi: Simplify tablet-mode-switch handling") Signed-off-by:
-
Kevin Kuriakose authored
To the best of my knowledge this is the same board as the B450M DS3H-CF, but with an added WiFi card. Name obtained using dmidecode, tested with force_load on v6.1.6 Signed-off-by:
Kevin Kuriakose <kevinmkuriakose@gmail.com> Acked-by:
Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20230119150925.31962-1-kevinmkuriakose@gmail.comReviewed-by:
-
Rishit Bansal authored
Add support to map the "HP Omen Key" to KEY_PROG2. Laptops in the HP Omen Series open the HP Omen Command Center application on windows. But, on linux it fails with the following message from the hp-wmi driver: [ 5143.415714] hp_wmi: Unknown event_id - 29 - 0x21a5 Also adds support to map Fn+Esc to KEY_FN_ESC. This currently throws the following message on the hp-wmi driver: [ 6082.143785] hp_wmi: Unknown key code - 0x21a7 There is also a "Win-Lock" key on HP Omen Laptops which supports Enabling and Disabling the Windows key, which trigger commands 0x21a4 and 0x121a4 respectively, but I wasn't able to find any KEY in input.h to map this to. Signed-off-by:
Rishit Bansal <rishitbansal0@gmail.com> Link: https://lore.kernel.org/r/20230120221214.24426-1-rishitbansal0@gmail.comReviewed-by:
-
Koba Ko authored
Some platforms send the speaker-mute key from EC. dell-wmi can't recognize it. Add a new keymap for KEY_MUTE in type 0x0010 table. Signed-off-by:
Koba Ko <koba.ko@canonical.com> Link: https://lore.kernel.org/r/20230117123436.200440-1-koba.ko@canonical.comReviewed-by:
-
- 22 Jan, 2023 2 commits
-
-
Linus Torvalds authored
-
git://git.kernel.dk/linuxLinus Torvalds authored
Pull another io_uring fix from Jens Axboe: "Just a single fix for a regression that happened in this release due to a poll change. Normally I would've just deferred it to next week, but since the original fix got picked up by stable, I think it's better to just send this one off separately. The issue is around the poll race fix, and how it mistakenly also got applied to multishot polling. Those don't need the race fix, and we should not be doing any reissues for that case. Exhaustive test cases were written and committed to the liburing regression suite for the reported issue, and additions for similar issues" * tag 'io_uring-6.2-2023-01-21' of git://git.kernel.dk/linux: io_uring/poll: don't reissue in case of poll race on multishot request
-
- 21 Jan, 2023 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg KH: "Here are some small char/misc and other subsystem driver fixes for 6.2-rc5 to resolve a few reported issues. They include: - long time pending fastrpc fixes (should have gone into 6.1, my fault) - mei driver/bus fixes and new device ids - interconnect driver fixes for reported problems - vmci bugfix - w1 driver bugfixes for reported problems Almost all of these have been in linux-next with no reported problems, the rest have all passed 0-day bot testing in my tree and on the mailing lists where they have sat too long due to me taking a long time to catch up on my pending patch queue" * tag 'char-misc-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: VMCI: Use threaded irqs instead of tasklets misc: fastrpc: Pass bitfield into qcom_scm_assign_mem gsmi: fix null-deref in gsmi_get_variable misc: fastrpc: Fix use-after-free race condition for maps misc: fastrpc: Don't remove map on creater_process and device_release misc: fastrpc: Fix use-after-free and race in fastrpc_map_find misc: fastrpc: fix error code in fastrpc_req_mmap() mei: me: add meteor lake point M DID mei: bus: fix unlink on bus in error path w1: fix WARNING after calling w1_process() w1: fix deadloop in __w1_remove_master_device() comedi: adv_pci1760: Fix PWM instruction handling interconnect: qcom: rpm: Use _optional func for provider clocks interconnect: qcom: msm8996: Fix regmap max_register values interconnect: qcom: msm8996: Provide UFS clocks to A2NoC dt-bindings: interconnect: Add UFS clocks to MSM8996 A2NoC -
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-coreLinus Torvalds authored
Pull driver core fixes from Greg KH: "Here are three small driver and kernel core fixes for 6.2-rc5. They include: - potential gadget fixup in do_prlimit - device property refcount leak fix - test_async_probe bugfix for reported problem" * tag 'driver-core-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: prlimit: do_prlimit needs to have a speculation check driver core: Fix test_async_probe_init saves device in wrong array device property: fix of node refcount leak in fwnode_graph_get_next_endpoint()
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging driver fix from Greg KH: "Here is a single staging driver fix for 6.2-rc5. It resolves a build issue reported and Fixed by Arnd in the vc04_services driver. It's been in linux-next this week with no reported problems" * tag 'staging-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: vchiq_arm: fix enum vchiq_status return types
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial driver fixes from Greg KH: "Here are some small tty and serial driver fixes for 6.2-rc5 that resolve a number of tiny reported issues and some new device ids. They include: - new device id for the exar serial driver - speakup tty driver bugfix - atmel serial driver baudrate fixup - stm32 serial driver bugfix and then revert as the bugfix broke the build. That will come back in a later pull request once it is all worked out properly. - amba-pl011 serial driver rs486 mode bugfix - qcom_geni serial driver bugfix Most of these have been in linux-next with no reported problems (well, other than the build breakage which generated the revert), the new device id passed 0-day testing" * tag 'tty-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: exar: Add support for Sealevel 7xxxC serial cards Revert "serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler" tty: serial: qcom_geni: avoid duplicate struct member init serial: atmel: fix incorrect baudrate setup tty: fix possible null-ptr-defer in spk_ttyio_release serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler serial: amba-pl011: fix high priority character transmission in rs486 mode serial: pch_uart: Pass correct sg to dma_unmap_sg() tty: serial: qcom-geni-serial: fix slab-out-of-bounds on RX FIFO buffer -
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB / Thunderbolt fixes from Greg KH: "Here are a number of small USB and Thunderbolt driver fixes and new device id changes for 6.2-rc5. Included in here are: - thunderbolt bugfixes for reported problems - new usb-serial driver ids added - onboard_hub usb driver fixes for much-reported problems - xhci bugfixes - typec bugfixes - ehci-fsl driver module alias fix - iowarrior header size fix - usb gadget driver fixes All of these, except for the iowarrior fix, have been in linux-next with no reported issues. The iowarrior fix passed the 0-day testing and is a one digit change based on a reported problem in the driver (which was written to a spec, not the real device that is now available)" * tag 'usb-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (40 commits) USB: misc: iowarrior: fix up header size for USB_DEVICE_ID_CODEMERCS_IOW100 usb: host: ehci-fsl: Fix module alias usb: dwc3: fix extcon dependency usb: core: hub: disable autosuspend for TI TUSB8041 USB: fix misleading usb_set_intfdata() kernel doc usb: gadget: f_ncm: fix potential NULL ptr deref in ncm_bitrate() USB: gadget: Add ID numbers to configfs-gadget driver names usb: typec: tcpm: Fix altmode re-registration causes sysfs create fail usb: gadget: g_webcam: Send color matching descriptor per frame usb: typec: altmodes/displayport: Use proper macro for pin assignment check usb: typec: altmodes/displayport: Fix pin assignment calculation usb: typec: altmodes/displayport: Add pin assignment helper usb: gadget: f_fs: Ensure ep0req is dequeued before free_request usb: gadget: f_fs: Prevent race during ffs_ep0_queue_wait usb: misc: onboard_hub: Move 'attach' work to the driver usb: misc: onboard_hub: Invert driver registration order usb: ucsi: Ensure connector delayed work items are flushed usb: musb: fix error return code in omap2430_probe() usb: chipidea: core: fix possible constant 0 if use IS_ERR(ci->role_switch) xhci: Detect lpm incapable xHC USB3 roothub ports from ACPI tables ...
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Hide LDFLAGS_vmlinux from decompressor Makefiles to fix error messages when GNU Make 4.4 is used. - Fix 'make modules' build error when CONFIG_DEBUG_INFO_BTF_MODULES=y. - Fix warnings emitted by GNU Make 4.4 in scripts/kconfig/Makefile. - Support GNU Make 4.4 for scripts/jobserver-exec. - Show clearer error message when kernel/gen_kheaders.sh fails due to missing cpio. * tag 'kbuild-fixes-v6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kheaders: explicitly validate existence of cpio command scripts: support GNU make 4.4 in jobserver-exec kconfig: Update all declared targets scripts: rpm: make clear that mkspec script contains 4.13 feature init/Kconfig: fix LOCALVERSION_AUTO help text kbuild: fix 'make modules' error when CONFIG_DEBUG_INFO_BTF_MODULES=y kbuild: export top-level LDFLAGS_vmlinux only to scripts/Makefile.vmlinux init/version-timestamp.c: remove unneeded #include <linux/version.h> docs: kbuild: remove mention to dropped $(objtree) feature
-
Linus Torvalds authored
We potentially have old hashes of the xattr names generated on systems with signed 'char' types. Now that everybody uses '-funsigned-char', those hashes will no longer match. This only happens if you use xattrs names that have the high bit set, which probably doesn't happen in practice, but the xfstest generic/454 shows it. Instead of adding a new "signed xattr hash filesystem" bit and having to deal with all the possible combinations, just calculate the hash both ways if the first one fails, and always generate new hashes with the proper unsigned char version. Reported-by:
kernel test robot <oliver.sang@intel.com> Link: https://lore.kernel.org/oe-lkp/202212291509.704a11c9-oliver.sang@intel.com Link: https://lore.kernel.org/all/CAHk-=whUNjwqZXa-MH9KMmc_CpQpoFKFjAB9ZKHuu=TbsouT4A@mail.gmail.com/ Exposed-by: 3bc753c0 ("kbuild: treat char as always unsigned") Cc: Eric Biggers <ebiggers@kernel.org> Cc: Andreas Dilger <adilger@dilger.ca> Cc: Theodore Ts'o <tytso@mit.edu>, Cc: Jason Donenfeld <Jason@zx2c4.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
