- 06 Feb, 2008 40 commits
-
-
Eric Dumazet authored
We can use ilog2() in fs/namespace.c to compute hash_bits and hash_mask at compile time, not runtime. [akpm@linux-foundation.org: clean it all up] Signed-off-by:
Eric Dumazet <dada1@cosmosbay.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Andrew Morton authored
- Account for debug_smp_processor_id()'s own preempt_disable() when displaying the preempt_count(). - 80 cols, not 800. Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Eric Dumazet authored
groups_sort() can be quite long if user loads a large gid table. This is because GROUP_AT(group_info, some_integer) uses an integer divide. So having to do XXX thousand divides during one syscall can lead to very high latencies. (NGROUPS_MAX=65536) In the past (25 Mar 2006), an analog problem was found in groups_search() (commit d74beb9f ) and at that time I changed some variables to unsigned int. I believe that a more generic fix is to make sure NGROUPS_PER_BLOCK is unsigned. Signed-off-by:
-
Adrian Bunk authored
Fix the following section mismatch with CONFIG_HOTPLUG=n, CONFIG_HOTPLUG_CPU=y: WARNING: vmlinux.o(.text+0x399a6): Section mismatch: reference to .init.text.5:idle_regs (between 'fork_idle' and 'get_task_mm') Signed-off-by:
Adrian Bunk <bunk@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by:
-
Adrian Bunk authored
calibrate_delay() must be __cpuinit, not __{dev,}init. I've verified that this is correct for all users. While doing the latter, I also did the following cleanups: - remove pointless additional prototypes in C files - ensure all users #include <linux/delay.h> This fixes the following section mismatches with CONFIG_HOTPLUG=n, CONFIG_HOTPLUG_CPU=y: WARNING: vmlinux.o(.text+0x1128d): Section mismatch: reference to .init.text.1:calibrate_delay (between 'check_cx686_slop' and 'set_cx86_reorder') WARNING: vmlinux.o(.text+0x25102): Section mismatch: reference to .init.text.1:calibrate_delay (between 'smp_callin' and 'cpu_coregroup_map') Signed-off-by: -
Richard Knutsson authored
Fixing: CHECK kernel/params.c kernel/params.c:329:41: warning: incorrect type in argument 8 (different signedness) kernel/params.c:329:41: expected int *num kernel/params.c:329:41: got unsigned int * Signed-off-by:
Richard Knutsson <ricknu-0@student.ltu.se> Signed-off-by:
-
Eric Dumazet authored
Actual code let compiler generates idiv instruction on x86. Using a right shift is OK here and readable as well. Before patch 10: 57 push %edi 11: 56 push %esi 12: 89 d6 mov %edx,%esi 14: 53 push %ebx 15: 89 c3 mov %eax,%ebx 17: eb 22 jmp 3b <search_extable+0x2b> 19: 89 f0 mov %esi,%eax 1b: ba 02 00 00 00 mov $0x2,%edx 20: 29 d8 sub %ebx,%eax 22: 89 d7 mov %edx,%edi 24: c1 f8 03 sar $0x3,%eax 27: 99 cltd 28: f7 ff idiv %edi 2a: 8d 04 c3 lea (%ebx,%eax,8),%eax 2d: 39 08 cmp %ecx,(%eax) ... After patch 00000010 <search_extable>: 10: 53 push %ebx 11: 89 c3 mov %eax,%ebx 13: eb 18 jmp 2d <search_extable+0x1d> 15: 89 d0 mov %edx,%eax 17: 29 d8 sub %ebx,%eax 19: c1 f8 04 sar $0x4,%eax 1c: 8d 04 c3 lea (%ebx,%eax,8),%eax 1f: 39 08 cmp %ecx,(%eax) ... Signed-off-by:
-
Petr Cvek authored
Add detection for IT87XX SuperIO chip and disabling its POST feature, which made noise on parallel port's pins. Signed-off-by:
Petr Cvek <petr.cvek@tul.cz> Signed-off-by:
-
Nick Warne authored
Add the Dell UK 6400 Inspiron model (MM061) to allow the i8k module to load correctly without using 'force=1' Signed-off-by:
"Nick Warne" <nick@ukfsn.org> Signed-off-by:
-
Thomas Bogendoerfer authored
Use DEFAULT_SGI_PARTITION for SGI_PARTION default Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
-
Christian Pellegrin authored
Fix wrong netmos 9855 serial port configuration. On loading only one serial port was present and it wasn't working. After looking in the data sheet I realized that the base address was wrong. For further reference here is lspci and relevant dmesg output: 02:00.0 Communication controller: NetMos Technology PCI 9855 Multi-I/O Controller (rev 01) (prog-if 02) Subsystem: LSI Logic / Symbios Logic Unknown device 0022 Flags: medium devsel, IRQ 19 I/O ports at df00 [size=8] I/O ports at de00 [size=8] I/O ports at dd00 [size=8] I/O ports at dc00 [size=8] I/O ports at db00 [size=8] I/O ports at da00 [size=16] parport1: PC-style at 0xdd00 [PCSPP,TRISTATE] parport2: PC-style at 0xdf00 [PCSPP,TRISTATE,EPP] 0000:02:00.0: ttyS0 at I/O 0xdb00 (irq = 19) is a 16550A 0000:02:00.0: ttyS1 at I/O 0xda00 (irq = 19) is a 16550A Signed-off-by:Christian Pellegrin <chripell@fsfe.org> Cc: Thomas Richter <thor@math.TU-Berlin.DE> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Martin Schitter <ms@gewi.kfunigraz.ac.at> Signed-off-by:
-
Luís P Mendes authored
Added pci device id for the Quatech SPPXP-100 ExpressCard - 0x278 - to include/linux/pci_id.h Modified drivers/parport/parport_pc.c to support the Quatech SPPXP-100 Parallel port PCI ExpressCard [akpm@linux-foundation.org: build fix] Signed-off-by:
Luís P Mendes <luis.p.mendes@gmail.com> Signed-off-by:
-
Nick Piggin authored
ext2 should not worry about checking sb->s_blocksize for XIP before the sb's blocksize actually gets set. Signed-off-by:
Nick Piggin <npiggin@suse.de> Acked-by:
Carsten Otte <cotte@de.ibm.com> Signed-off-by:
-
Daniel Walker authored
The port_write_mutex was converted from a semaphore to a mutex, but there was still this ifdef'd init_MUTEX reference remaining. Signed-off-by:
Daniel Walker <dwalker@mvista.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Daniel Walker authored
[akpm@linux-foundation.org: cleanup] Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Denis Cheng authored
Signed-off-by:
Denis Cheng <crquan@gmail.com> Cc: Chris Mason <chris.mason@oracle.com> Cc: Jeff Mahoney <jeffm@suse.com> Signed-off-by:
-
Denis Cheng authored
Signed-off-by:
-
Daniel Walker authored
I converted some of the document to reflect mutex usage instead of semaphore usage. Since we shouldin't be promoting semaphore usage when it's on it's way out.. Signed-off-by:
-
Joe Peterson authored
Turn on INTR/QUIT/SUSP echoing in the N_TTY line discipline (e.g. ctrl-C will appear as "^C" if stty echoctl is set and ctrl-C is set as INTR). Linux seems to be the only unix-like OS (recently I've verified this on Solaris, BSD, and Mac OS X) that does *not* behave this way, and I really miss this as a good visual confirmation of the interrupt of a program in the console or xterm. I remember this fondly from many Unixs I've used over the years as well. Bringing this to Linux also seems like a good way to make it yet more compliant with standard unix-like behavior. [akpm@linux-foundation.org: coding-style fixes] Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
-
Roland McGrath authored
This adds support to allow asm/ptrace.h to define two new macros, arch_ptrace_stop_needed and arch_ptrace_stop. These control special machine-specific actions to be done before a ptrace stop. The new code compiles away to nothing when the new macros are not defined. This is the case on all machines to begin with. On ia64, these macros will be defined to solve the long-standing issue of ptrace vs register backing store. Signed-off-by:
Roland McGrath <roland@redhat.com> Cc: Petr Tesarik <ptesarik@suse.cz> Cc: Tony Luck <tony.luck@intel.com> Cc: Matthew Wilcox <willy@debian.org> Signed-off-by:
-
Jan Kara authored
We restarted scan of sb->s_inodes list whenever we had to drop inode_lock in add_dquot_ref(). This leads to overall quadratic running time and thus add_dquot_ref() can take several minutes when called on a life filesystem. We fix the problem by using the fact that inode cannot be removed from s_inodes list while we hold a reference to it and thus we can safely restart the scan if we don't drop the reference. Here we use the fact that inodes freshly added to s_inodes list are already guaranteed to have quotas properly initialized and the ordering of inodes on s_inodes list does not change so we cannot skip any inode. Thanks goes to Nick <gentuu@gmail.com> for analyzing the problem and testing the fix. [akpm@linux-foundation.org: iput(NULL) is legal] Signed-off-by:
Jan Kara <jack@suse.cz> Cc: Nick <gentuu@gmail.com> Signed-off-by:
-
Denis Cheng authored
single list_head variable initialized with LIST_HEAD_INIT could almost always can be replaced with LIST_HEAD declaration, this shrinks the code and looks better. Signed-off-by:
-
Nick Piggin authored
Convert uio from nopage to fault. Signed-off-by:
Hans J Koch <hjk@linutronix.de> Signed-off-by:
-
Nick Piggin authored
Convert relay from nopage to fault. Remove redundant vma range checks. Switch from OOM to SIGBUS if the resource is not available. Signed-off-by:
-
Paulo Marques authored
When resolving symbol names from addresses with aliased symbol names, kallsyms_lookup always returns the first symbol, even if it is a weak symbol. This patch changes this by sorting the symbols with the weak symbols last before feeding them to the kernel. This way the kernel runtime isn't changed at all, only the kallsyms build system is changed. Another side effect is that the symbols get sorted by address, too. So, even if future binutils version have some bug in "nm" that makes it fail to correctly sort symbols by address, the kernel won't be affected by this. Mathieu says: I created a module in LTTng that uses kallsyms to get the symbol corresponding to a specific system call address. Unfortunately, all the unimplemented syscalls were all referring to the (same) weak symbol identifying an unrelated system call rather that sys_ni (or whatever non-weak symbol would be expected). Kallsyms was dumbly returning the first symbol that matched. This patch makes sure kallsyms returns the non-weak symbol when there is one, which seems to be the expected result. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Looks-great-to: Rusty Russell <rusty@rustcorp.com.au> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
Daniel Walker authored
Convert the unix98 allocated_ptys_lock to a mutex. Signed-off-by:
-
Daniel Walker authored
I couldn't find any users, so removing it.. Signed-off-by:
-
Daniel Walker authored
I couldn't find any users, so removing it.. Signed-off-by:
Alan Cox <alan@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by:
-
Daniel Drake authored
Here's a document I wrote after figuring out what unaligned memory access is all about. I've tried to cover the information I was looking for when trying to learn about this, without producing a hopelessly detailed/complex spew. I hope it is useful to others. Signed-off-by:
Daniel Drake <dsd@gentoo.org> Cc: Rob Landley <rob@landley.net> Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Jan Engelhardt <jengelh@computergmbh.de> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Kyle Moffett <mrmacman_g4@mac.com> Signed-off-by:
-
Nick Piggin authored
The inotify debugging code is supposed to verify that the DCACHE_INOTIFY_PARENT_WATCHED scalability optimisation does not result in notifications getting lost nor extra needless locking generated. Unfortunately there are also some races in the debugging code. And it isn't very good at finding problems anyway. So remove it for now. Signed-off-by:
-
Nick Piggin authored
There is a race between setting an inode's children's "parent watched" flag when placing the first watch on a parent, and instantiating new children of that parent: a child could miss having its flags set by set_dentry_child_flags, but then inotify_d_instantiate might still see !inotify_inode_watched. The solution is to set_dentry_child_flags after adding the watch. Locking is taken care of, because both set_dentry_child_flags and inotify_d_instantiate hold dcache_lock and child->d_locks. Signed-off-by:
-
Thomas Bogendoerfer authored
New serial driver for SC2681/SC2691 uarts. Older SNI RM400 machines are using these chips for onboard serial ports. Signed-off-by:
-
Thomas Bogendoerfer authored
Use SGI_HAS_DS1286 for SGI_DS1286 depends Signed-off-by:
-
Thomas Bogendoerfer authored
- Use SGI_HAS_ZILOG for IP22_ZILOG depends - remove IP22 from description, because the driver works on more than IP22 SGI machines Signed-off-by:
-
Robert P. J. Day authored
Given that init/Makefile includes initramfs.c in the build only if CONFIG_BLK_DEV_INITRD is defined, there seems to be no point checking for it yet again. Signed-off-by:
Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by:
-
Paul E. McKenney authored
The rcu_assign_pointer() primitive currently unconditionally executes a memory barrier, even when a NULL pointer is being assigned. This has lead some to avoid using rcu_assign_pointer() for NULL pointers, which loses the self-documenting advantages of rcu_assign_pointer() This patch uses __builtin_const_p() to omit needless memory barriers for NULL-pointer assignments at compile time with no runtime penalty, as discussed in the following thread: http://www.mail-archive.com/netdev@vger.kernel.org/msg54852.html Tested on x86_64 and ppc64, also compiled the four cases (NULL/non-NULL and const/non-const) with gcc version 4.1.2, and hand-checked the assembly output. Signed-off-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Qi Yong authored
Signed-off-by:
Qi Yong <qiyong@fc-cn.com> Signed-off-by:
-
Matt Mackall authored
Reduce latency for large writes to /dev/[u]random Signed-off-by:
Matt Mackall <mpm@selenic.com> Cc: Sami Farin <safari-kernel@safari.iki.fi> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Jeff Dike authored
The declaration and implementation of __const_udelay use different names for the parameter on a number of architectures: include/asm-avr32/delay.h:15:extern void __const_udelay(unsigned long usecs); arch/avr32/lib/delay.c:39:inline void __const_udelay(unsigned long xloops) include/asm-sh/delay.h:15:extern void __const_udelay(unsigned long usecs); arch/sh/lib/delay.c:22:inline void __const_udelay(unsigned long xloops) include/asm-m32r/delay.h:15:extern void __const_udelay(unsigned long usecs); arch/m32r/lib/delay.c:58:void __const_udelay(unsigned long xloops) include/asm-x86/delay.h:16:extern void __const_udelay(unsigned long usecs); arch/x86/lib/delay_32.c:82:inline void __const_udelay(unsigned long xloops) arch/x86/lib/delay_64.c:46:inline void __const_udelay(unsigned long xloops) The units of the parameter isn't usecs, so that name is definitely wrong. It's also not exactly loops, so I suppose xloops is an OK name. This patch changes these names from usecs to xloops. Signed-off-by:
Jeff Dike <jdike@linux.intel.com> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by:
-
Paul Fulghum authored
Fix missed serial input signal changes caused by rereading the serial status register during interrupt processing. Now processing is performed on original status register value. Signed-off-by:
Paul Fulghum <paulkf@microgate.com> Signed-off-by:
-
