- 09 Oct, 2014 25 commits
-
-
Sagi Grimberg authored
Rather than using the basic BSF layout which utilizes a pre-configured signature settings (sufficient for current DIF implementation), we use the extended BSF layout to expose advanced signature settings. These settings will also be exposed to the user later. Signed-off-by:
Sagi Grimberg <sagig@mellanox.com> Signed-off-by:
Roland Dreier <roland@purestorage.com>
-
Sagi Grimberg authored
In the future this will be a per-command parameter so we can lose it, but in the mean time IP_CSUM is a lot lighter for SW layers to compute, set it as default. Signed-off-by:
-
Sagi Grimberg authored
We clear the struct before - no need to do 0 assignment. Signed-off-by:
-
Sagi Grimberg authored
In case input and output space parameters match, we can use a copy mask from input and output space. Use enums for those. Signed-off-by:
-
Or Gerlitz authored
Update the driver version and add Sagi Grimberg as maintainer Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
Sagi Grimberg authored
This patch does not change any functionality. Signed-off-by:
-
Sagi Grimberg authored
- iser_hdr - iser_data_buf - iser_mem_reg - iser_regd_buf - iser_tx_desc - iser_rx_desc - iser_device - iser_pi_context - iser_conn - ib_conn - iser_comp - iscsi_iser_task - iser_global While we're at it, change nit alignments in this file This patch does not change any functionality. Signed-off-by:
-
Sagi Grimberg authored
Change logging: "iser:XXXX" to "iser: XXXX" Signed-off-by:
-
Ariel Nahum authored
Match to the debug level of all functions in connect/disconnect flows. Signed-off-by:
Ariel Nahum <arieln@mellanox.com> Signed-off-by:
-
Sagi Grimberg authored
Singal completion of every 32 scsi commands and suppress all the rest. We don't do anything upon getting the completion so no need to "just consume" it. Cleanup of scsi command is done in cleanup_task callback. Still keep dataout and control send completions as we may need to cleanup there. This helps reducing the amount of interrupts/completions in the IO path. Signed-off-by:
-
Sagi Grimberg authored
Poll in batch of 16. Since we don't want it on the stack, keep under iser completion context (iser_comp). Signed-off-by:
-
Sagi Grimberg authored
Avoid post_send counting (atomic) in the IO path just to keep track of how many completions we need to consume. Use a beacon post to indicate that all prior posts completed. Signed-off-by:
-
Sagi Grimberg authored
This will solve a possible condition where we might miss TX completion (flush error) during session teardown. Since we are using a single CQ, we don't need to actively drain the TX CQ, instead just wait for flush_completion (when counters reach zero) and remove iser_poll_for_flush_errors(). This patch might introduce a minor performance regression on its own, but the next patches will enhance performance using a single CQ for RX and TX. Signed-off-by:
-
Sagi Grimberg authored
We need a way to guarentee that we don't stay in soft-IRQ context for too long. We might starve other pending CQ tasklets or worse lock against application trying to issue IO on the running CPU. Signed-off-by:
Roi Dayan <roid@mellanox.com> Signed-off-by:
-
Sagi Grimberg authored
Introduce iser_comp which centralizes all iser completion related items and is referenced by iser_device and each ib_conn. Signed-off-by:
-
Ariel Nahum authored
In case iscsid was violently killed (SIGKILL) during its error recovery stage, we may never get a connection teardown sequence for some of the old connections. No harm done, but when we try to unload the module we will need to cleanup all these connections. So we actually may end-up here - so it's not a BUG_ON(), just give a relaxed warning that this happened and continue with normal unload. BUG_ON() will cause segfault on module_exit and we don't want that. Signed-off-by:
-
Sagi Grimberg authored
Previously we notified iscsi layer about the connection layer when we consumed all of our flush errors. This was racy as there was no guarentee that iscsi_conn wasn't terminated by then (which ends up in an invalid memory access). In case we got a non FLUSH error completion, we are guarenteed that iscsi_conn is still alive. We should notify iSCSI layer with iscsi_conn_failure to initiate error handling. While we are at it, add a nice kernel-doc style documentation. Signed-off-by:
-
Sagi Grimberg authored
Bailout in case a task cleanup (iscsi_iser_cleanup_task) is called after the IB device was removed (DEVICE_REMOVAL CM event). We also call iscsi_conn_stop with a lock taken to prevent DEVICE_REMOVAL and tasks cleanup from racing. Signed-off-by:
-
Ariel Nahum authored
Previously we didn't need to unbind the iser_conn and iscsi_conn since we always relied on iscsi daemon to teardown the connection and never let it finish before we cleanup all that is needed in iser. This is not the case anymore (for DEVICE_REMOVAL event). So avoid any possible chance we cause iscsi_conn dereference after iscsi_conn was freed. We also call iser_conn_terminate (safe to call multiple times) just for the corner case of iscsi daemon stopping an old connection before invoking endpoint removal (might happen if it was violently killed). Notice we are unbinding under a lock - which is required. Signed-off-by:
-
Sagi Grimberg authored
We no longer rely on iscsi connection teardown sequence, so no need to give a grace period and continue cleanup if it expired. Have iser_conn_release wait for full completion before freeing iser_conn. ib_completion: Guaranteed to come when: - Got DISCONNECTED/ADDR_CHANGE event or - iSCSI called ep_disconnect/conn_stop Guaranteed to finish when: - Got TIMEWAIT_EXIT/DEVICE_REMOVAL event - All Flush errors are consumed - IB related resources are destroyed stop_completion: Guaranteed to come when: - iSCSI calls conn_stop Guaranteed to finish when: - All inflight tasks were cleaned up Signed-off-by:
-
Sagi Grimberg authored
iscsi daemon is in user-space, thus we can't rely on it to be invoked at connection teardown (if not running or does not receive CPU time). This patch addresses the issue by re-structuring iSER connection teardown logic and CM events handling. The CM events will dictate the RDMA resources destruction (ib_conn) and iser_conn is kept around as long as iscsi_conn is left around allowing iscsi/iser callbacks to continue after RDMA transport was destroyed. This patch introduces a separation in logic when handling CM events: - DISCONNECTED_HANDLER, ADDR_CHANGED This events indicate the start of teardown process. Actions: 1. Terminate the connection: rdma_disconnect (send DREQ/DREP) 2. Notify iSCSI of connection failure 3. Change state to TERMINATING 4. Poll for all flush errors to be consumed - TIMEWAIT_EXIT, DEVICE_REMOVAL These events indicate the final stage of termination process and we can free RDMA related resources. Actions: 1. Call disconnected handler (we are not guaranteed that DISCONNECTED event was invoked in the past) 2. Cleanup RDMA related resources 3. For DEVICE_REMOVAL return non-zero rc from cma_handler to implicitly destroy the cm_id (Can't rely on user-space, make sure we have forward progress) We replace flush_completion (indicate all flushes were consumed) with ib_completion (rdma resources were cleaned up). The iser_conn_release_work will wait for teardown completions: - conn_stop was completed (tasks were cleaned-up) - stop_completion - RDMA resources were destroyed - ib_completion And then will continue to free iser connection representation (iser_conn). Signed-off-by: -
Sagi Grimberg authored
Put all connection IB related resources release in this routine. One exception is the cm_id which cannot be destroyed as the routine is protected by the state mutex. Also move its position to avoid forward declaration. While at it fix qp NULL assignment. Signed-off-by:
-
Roi Dayan authored
Signed-off-by:
-
Sagi Grimberg authored
Structure that describes the RDMA relates connection objects. Static member of iser_conn. This patch does not change any functionality Signed-off-by:
-
Sagi Grimberg authored
Two reasons why we choose to do this: 1. No point today calling struct iser_conn by another name ib_conn 2. In the next patches we will restructure iser control plane representation - struct iser_conn: connection logical representation - struct ib_conn: connection RDMA layout representation This patch does not change any functionality. Signed-off-by:
-
- 28 Sep, 2014 3 commits
-
-
Linus Torvalds authored
-
git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds authored
Pull slave-dmaengine fixes from Vinod Koul: "Two small fixes for omap dmaengine driver which fixes cyclic suspend and resume" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: omap-dma: Restore the CLINK_CTRL in resume path dmaengine: omap-dma: Add memory barrier to dma_resume path
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs fixes from Al Viro: "Assorted fixes + unifying __d_move() and __d_materialise_dentry() + minimal regression fix for d_path() of victims of overwriting rename() ported on top of that" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: vfs: Don't exchange "short" filenames unconditionally. fold swapping ->d_name.hash into switch_names() fold unlocking the children into dentry_unlock_parents_for_move() kill __d_materialise_dentry() __d_materialise_dentry(): flip the order of arguments __d_move(): fold manipulations with ->d_child/->d_subdirs don't open-code d_rehash() in d_materialise_unique() pull rehashing and unlocking the target dentry into __d_materialise_dentry() ufs: deal with nfsd/iget races fuse: honour max_read and max_write in direct_io mode shmem: fix nlink for rename overwrite directory
-
- 27 Sep, 2014 12 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroupLinus Torvalds authored
Pull cgroup fixes from Tejun Heo: "This is quite late but these need to be backported anyway. This is the fix for a long-standing cpuset bug which existed from 2009. cpuset makes use of PF_SPREAD_{PAGE|SLAB} flags to modify the task's memory allocation behavior according to the settings of the cpuset it belongs to; unfortunately, when those flags have to be changed, cpuset did so directly even whlie the target task is running, which is obviously racy as task->flags may be modified by the task itself at any time. This obscure bug manifested as corrupt PF_USED_MATH flag leading to a weird crash. The bug is fixed by moving the flag to task->atomic_flags. The first two are prepatory ones to help defining atomic_flags accessors and the third one is the actual fix" * 'for-3.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cpuset: PF_SPREAD_PAGE and PF_SPREAD_SLAB should be atomic flags sched: add macros to define bitops for task atomic flags sched: fix confusing PFA_NO_NEW_PRIVS constant -
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "Here's our last set of fixes for 3.17. Most of these are for TI platforms, fixing some noisy Kconfig issues, runtime clock and power issues on several platforms and NAND timings on DRA7. There are also a couple of bug fixes for i.MX, one for QCOM and a small fix to avoid section mismatch noise on PXA. Diffstat looks large, partially due to some tables being updated and thus touching many lines. The qcom gsbi change also restructures clock management a bit and thus touches a bunch of lines. All in all, a bit more changes than we'd like at this point, but nothing stands out as risky either so it seems like the right thing to send it up now instead of holding it to the merge window" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: drivers/soc: qcom: do not disable the iface clock in probe ARM: imx: fix .is_enabled() of shared gate clock ARM: OMAP3: Fix I/O chain clock line assertion timed out error ARM: keystone: dts: fix bindings for pcie and usb clock nodes bus: omap_l3_noc: Fix connID for OMAP4 ARM: DT: imx53: fix lvds channel 1 port ARM: dts: cm-t54: fix serial console power supply. ARM: dts: dra7-evm: Fix NAND GPMC timings ARM: pxa: fix section mismatch warning for pxa_timer_nodt_init ARM: OMAP: Fix Kconfig warning for omap1
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS fixes from Ralf Baechle: "The final round of fixes. One corner case in the math emulator and another one in the mcount function for ftrace" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: mcount: Adjust stack pointer for static trace in MIPS32 MIPS: Fix MFC1 & MFHC1 emulation for 64-bit MIPS systems
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: "This has: - EFI revert to fix a boot regression - early_ioremap() fix for boot failure - KASLR fix for possible boot failures - EFI fix for corrupted string printing - remove a misleading EFI bootup 'failed!' error message Unfortunately it's all rather close to the merge window" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/efi: Truncate 64-bit values when calling 32-bit OutputString() x86/efi: Delete misleading efi_printk() error message Revert "efi/x86: efistub: Move shared dependencies to <asm/efi.h>" x86/kaslr: Avoid the setup_data area when picking location x86 early_ioremap: Increase FIX_BTMAPS_SLOTS to 8
-
Mikhail Efremov authored
Only exchange source and destination filenames if flags contain RENAME_EXCHANGE. In case if executable file was running and replaced by other file /proc/PID/exe should still show correct file name, not the old name of the file by which it was replaced. The scenario when this bug manifests itself was like this: * ALT Linux uses rpm and start-stop-daemon; * during a package upgrade rpm creates a temporary file for an executable to rename it upon successful unpacking; * start-stop-daemon is run subsequently and it obtains the (nonexistant) temporary filename via /proc/PID/exe thus failing to identify the running process. Note that "long" filenames (> DNAiME_INLINE_LEN) are still exchanged without RENAME_EXCHANGE and this behaviour exists long enough (should be fixed too apparently). So this patch is just an interim workaround that restores behavior for "short" names as it was before changes introduced by commit da1ce067 ("vfs: add cross-rename"). See https://lkml.org/lkml/2014/9/7/6 for details. AV: the comments about being more careful with ->d_name.hash than with ->d_name.name are from back in 2.3.40s; they became obsolete by 2.3.60s, when we started to unhash the target instead of swapping hash chain positions followed by d_delete() as we used to do when dcache was first introduced. Acked-by:
Miklos Szeredi <mszeredi@suse.cz> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: stable@vger.kernel.org Fixes: da1ce067 "vfs: add cross-rename" Signed-off-by:
Mikhail Efremov <sem@altlinux.org> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Linus Torvalds authored
and do it along with ->d_name.len there Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Al Viro authored
... renaming it into dentry_unlock_for_move() and making it more symmetric with dentry_lock_for_move(). Signed-off-by: -
Al Viro authored
it folds into __d_move() now Signed-off-by: -
Al Viro authored
... thus making it much closer to (now unreachable, BTW) IS_ROOT(dentry) case in __d_move(). A bit more and it'll fold in. Signed-off-by: -
Al Viro authored
list_del() + list_add() is a slightly pessimised list_move() list_del() + INIT_LIST_HEAD() is a slightly pessimised list_del_init() Interleaving those makes the resulting code even worse. And harder to follow... Signed-off-by: -
Al Viro authored
... and get rid of duplicate BUG_ON() there Signed-off-by: -
Al Viro authored
Signed-off-by:
-
