- 25 Jul, 2022 11 commits
-
-
Michael Ellerman authored
The ptrace-gpr test can now be built 32-bit, so do that if that's the compiler default rather than forcing a 64-bit build. Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220627140239.2464900-9-mpe@ellerman.id.au
-
Michael Ellerman authored
Some of the ptrace tests check the contents of floating pointer registers. Currently these use float, which is always 4 bytes, but the ptrace API supports saving/restoring 8 bytes per register, so switch to using doubles to exercise the code more fully. Signed-off-by:
-
Michael Ellerman authored
This function is never called, drop it. Signed-off-by:
-
Michael Ellerman authored
Add support for 32-bit builds to the asm helpers. Signed-off-by:
-
Michael Ellerman authored
Thare are some asm helpers for creating/popping stack frames in basic_asm.h. They always save/restore r2 (TOC pointer), but none of the selftests change r2, so it's unnecessary to save it by default. Signed-off-by:
-
Michael Ellerman authored
Thare are some asm helpers for creating/popping stack frames in basic_asm.h. They always save/restore CR, but none of the selftests tests touch non-volatile CR fields, so it's unnecessary to save them by default. Signed-off-by:
-
Michael Ellerman authored
Currently all ptrace tests are built 64-bit and with TM enabled. Only the TM tests need TM enabled, so split those out into a separate variable so that can be specified precisely. Split the rest of the tests into a variable, and add -m64 to CFLAGS for those tests, so that in a subsequent patch some tests can be made to build 32-bit. Signed-off-by:
-
Michael Ellerman authored
Set LOCAL_HDRS so header changes cause rebuilds. The lib.mk logic adds all the headers in LOCAL_HDRS as dependencies, so there's no need to also list them explicitly. Signed-off-by:
-
Michael Ellerman authored
The PUSH/POP_BASIC_STACK helpers in basic_asm.h do not ensure that the stack pointer is always 16-byte aligned, which is required per the ABI. Fix the macros to do the alignment if the caller fails to. Currently only one caller passes a non-aligned size, tm_signal_self(), which hasn't been caught in testing, presumably because it's a leaf function. Signed-off-by:
-
Michael Ellerman authored
Since commit 87c78b61 ("powerpc: Fix all occurences of "the the"") fixed "the the", there's now a steady stream of patches fixing other duplicate words. Just fix them all at once, to save the overhead of dealing with individual patches for each case. This leaves a few cases of "that that", which in some contexts is correct. Signed-off-by:
-
Michael Ellerman authored
Bring in a build fix for GCC12 from our fixes branch.
-
- 20 Jul, 2022 6 commits
-
-
Ning Qiang authored
In do_adb_query() function of drivers/macintosh/adb.c, req->data is copied form userland. The parameter "req->data[2]" is missing check, the array size of adb_handler[] is 16, so adb_handler[req->data[2]].original_address and adb_handler[req->data[2]].handler_id will lead to oob read. Cc: stable <stable@kernel.org> Signed-off-by:
Ning Qiang <sohu0106@126.com> Reviewed-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Scott Cheloha authored
PAPR v2.12 defines a new hypercall, H_WATCHDOG. The hypercall permits guest control of one or more virtual watchdog timers. The timers have millisecond granularity. The guest is terminated when a timer expires. This patch adds a watchdog driver for these timers, "pseries-wdt". pseries_wdt_probe() currently assumes the existence of only one platform device and always assigns it watchdogNumber 1. If we ever expose more than one timer to userspace we will need to devise a way to assign a distinct watchdogNumber to each platform device at device registration time. Signed-off-by:
Scott Cheloha <cheloha@linux.ibm.com> Acked-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Scott Cheloha authored
PAPR v2.12 defines a new hypercall, H_WATCHDOG. The hypercall permits guest control of one or more virtual watchdog timers. These timers do not conform to PowerPC device conventions. They are not affixed to any extant bus, nor do they have full representation in the device tree. As a workaround we represent them as platform devices. This patch registers a single platform device, "pseries-wdt", with the platform bus if the FW_FEATURE_WATCHDOG flag is set. A driver for this device, "pseries-wdt", will be introduced in a subsequent patch. Signed-off-by:
-
Scott Cheloha authored
PAPR v2.12 specifies a new optional function set, "hcall-watchdog", for the /rtas/ibm,hypertas-functions property. The presence of this function set indicates support for the H_WATCHDOG hypercall. Check for this function set and, if present, set the new FW_FEATURE_WATCHDOG flag. Signed-off-by:
-
Scott Cheloha authored
PAPR v2.12 defines a new hypercall, H_WATCHDOG. The hypercall permits guest control of one or more virtual watchdog timers. Add the opcode for the H_WATCHDOG hypercall to hvcall.h. While here, add a definition for H_NOOP, a possible return code for H_WATCHDOG. Signed-off-by:
-
Michael Ellerman authored
With GCC 12 allmodconfig prom_init fails to build: Error: External symbol 'memset' referenced from prom_init.c make[2]: *** [arch/powerpc/kernel/Makefile:204: arch/powerpc/kernel/prom_init_check] Error 1 The allmodconfig build enables KASAN, so all calls to memset in prom_init should be converted to __memset by the #ifdefs in asm/string.h, because prom_init must use the non-KASAN instrumented versions. The build failure happens because there's a call to memset that hasn't been caught by the pre-processor and converted to __memset. Typically that's because it's a memset generated by the compiler itself, and that is the case here. With GCC 12, allmodconfig enables CONFIG_INIT_STACK_ALL_PATTERN, which causes the compiler to emit memset calls to initialise on-stack variables with a pattern. Because prom_init is non-user-facing boot-time only code, as a workaround just disable stack variable initialisation to unbreak the build. Reported-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
-
- 18 Jul, 2022 4 commits
-
-
Uwe Kleine-König authored
Returning an error code (here -EBUSY) from a remove callback doesn't prevent the driver from being unloaded. The only effect is that an error message is emitted and the driver is removed anyhow. So instead drop the remove function (which is equivalent to returning zero) and set the suppress_bind_attrs property to make it impossible to unload the driver via sysfs. This is a preparation for making platform remove callbacks return void. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by:
Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by:
-
Athira Rajeev authored
Details is added about "caps" attribute group in the ABI documentation. This is used to expose some of the PMU attributes in "caps" directory under : /sys/bus/event_source/devices/<dev>/. The dev/caps will contain information about features that platform specific PMU supports. Signed-off-by:
Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by:
-
Athira Rajeev authored
Add caps support under "/sys/bus/event_source/devices/<pmu>/" for powerpc. This directory can be used to expose some of the specific features that powerpc PMU supports to the user. Example: pmu_name. The name of PMU registered will depend on platform, say power9 or power10 or it could be Generic Compat PMU. Currently the only way to know which is the registered PMU is from the dmesg logs. But clearing the dmesg will make it difficult to know exact PMU backend used. And even extracting from dmesg will be complicated, as we need to parse the dmesg logs and add filters for pmu name. Whereas by exposing it via caps will make it easy as we just need to directly read it from the sysfs. Add a caps directory to /sys/bus/event_source/devices/cpu/ for power8, power9, power10 and generic compat PMU in respective PMU driver code. Update the pmu_name file under caps folder in core-book3s using "attr_update". The information exposed currently: - pmu_name : Underlying PMU name from the driver Example result with power9 pmu: # ls /sys/bus/event_source/devices/cpu/caps pmu_name # cat /sys/bus/event_source/devices/cpu/caps/pmu_name POWER9 Signed-off-by:
-
Joel Stanley authored
When booting on a machine that uses the compat pmu driver we see this: [ 0.071192] GENERIC_COMPAT performance monitor hardware support registered Which is a bit shouty. Give it a nicer name. Signed-off-by:
Joel Stanley <joel@jms.id.au> Reviewed-by:
-
- 09 Jul, 2022 2 commits
-
-
Michael Ellerman authored
Merge KVM related commits we are keeping in a topic branch in case of any conflicts with generic KVM changes.
-
Michael Ellerman authored
Merge our fixes branch. In particular this brings in commit 98648161 ("powerpc/book3e: Fix PUD allocation size in map_kernel_page()") which fixes a build failure in next, because commit 2db2008e ("powerpc/64e: Rewrite p4d_populate() as a static inline function") depends on it.
-
- 04 Jul, 2022 1 commit
-
-
Jason A. Donenfeld authored
The platform device for the rng must be created much later in boot. Otherwise it tries to connect to a parent that doesn't yet exist, resulting in this splat: [ 0.000478] kobject: '(null)' ((____ptrval____)): is not initialized, yet kobject_get() is being called. [ 0.002925] [c000000002a0fb30] [c00000000073b0bc] kobject_get+0x8c/0x100 (unreliable) [ 0.003071] [c000000002a0fba0] [c00000000087e464] device_add+0xf4/0xb00 [ 0.003194] [c000000002a0fc80] [c000000000a7f6e4] of_device_add+0x64/0x80 [ 0.003321] [c000000002a0fcb0] [c000000000a800d0] of_platform_device_create_pdata+0xd0/0x1b0 [ 0.003476] [c000000002a0fd00] [c00000000201fa44] pnv_get_random_long_early+0x240/0x2e4 [ 0.003623] [c000000002a0fe20] [c000000002060c38] random_init+0xc0/0x214 This patch fixes the issue by doing the platform device creation inside of machine_subsys_initcall. Fixes: f3eac426 ("powerpc/powernv: wire up rng during setup_arch") Cc: stable@vger.kernel.org Reported-by:
Sachin Sant <sachinp@linux.ibm.com> Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Tested-by:
-
- 29 Jun, 2022 16 commits
-
-
Aneesh Kumar K.V authored
With commit ffa0b64e ("powerpc: Fix virt_addr_valid() for 64-bit Book3E & 32-bit") the kernel now validate the addr against high_memory value. This results in the below BUG_ON with dax pfns. [ 635.798741][T26531] kernel BUG at mm/page_alloc.c:5521! 1:mon> e cpu 0x1: Vector: 700 (Program Check) at [c000000007287630] pc: c00000000055ed48: free_pages.part.0+0x48/0x110 lr: c00000000053ca70: tlb_finish_mmu+0x80/0xd0 sp: c0000000072878d0 msr: 800000000282b033 current = 0xc00000000afabe00 paca = 0xc00000037ffff300 irqmask: 0x03 irq_happened: 0x05 pid = 26531, comm = 50-landscape-sy kernel BUG at :5521! Linux version 5.19.0-rc3-14659-g4ec05be7c2e1 (kvaneesh@ltc-boston8) (gcc (Ubuntu 9.4.0-1ubuntu1~20.04.1) 9.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #625 SMP Thu Jun 23 00:35:43 CDT 2022 1:mon> t [link register ] c00000000053ca70 tlb_finish_mmu+0x80/0xd0 [c0000000072878d0] c00000000053ca54 tlb_finish_mmu+0x64/0xd0 (unreliable) [c000000007287900] c000000000539424 exit_mmap+0xe4/0x2a0 [c0000000072879e0] c00000000019fc1c mmput+0xcc/0x210 [c000000007287a20] c000000000629230 begin_new_exec+0x5e0/0xf40 [c000000007287ae0] c00000000070b3cc load_elf_binary+0x3ac/0x1e00 [c000000007287c10] c000000000627af0 bprm_execve+0x3b0/0xaf0 [c000000007287cd0] c000000000628414 do_execveat_common.isra.0+0x1e4/0x310 [c000000007287d80] c00000000062858c sys_execve+0x4c/0x60 [c000000007287db0] c00000000002c1b0 system_call_exception+0x160/0x2c0 [c000000007287e10] c00000000000c53c system_call_common+0xec/0x250 The fix is to make sure we update high_memory on memory hotplug. This is similar to what x86 does in commit 3072e413 ("mm/memory_hotplug: introduce add_pages") Fixes: ffa0b64e ("powerpc: Fix virt_addr_valid() for 64-bit Book3E & 32-bit") Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Reviewed-by:
Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by:
-
Naveen N. Rao authored
Trying to build a .c file that includes <linux/bpf_perf_event.h>: $ cat test_bpf_headers.c #include <linux/bpf_perf_event.h> throws the below error: /usr/include/linux/bpf_perf_event.h:14:28: error: field ‘regs’ has incomplete type 14 | bpf_user_pt_regs_t regs; | ^~~~ This is because we typedef bpf_user_pt_regs_t to 'struct user_pt_regs' in arch/powerpc/include/uaps/asm/bpf_perf_event.h, but 'struct user_pt_regs' is not exposed to userspace. Powerpc has both pt_regs and user_pt_regs structures. However, unlike arm64 and s390, we expose user_pt_regs to userspace as just 'pt_regs'. As such, we should typedef bpf_user_pt_regs_t to 'struct pt_regs' for userspace. Within the kernel though, we want to typedef bpf_user_pt_regs_t to 'struct user_pt_regs'. Remove arch/powerpc/include/uapi/asm/bpf_perf_event.h so that the uapi/asm-generic version of the header is exposed to userspace. Introduce arch/powerpc/include/asm/bpf_perf_event.h so that we can typedef bpf_user_pt_regs_t to 'struct user_pt_regs' for use within the kernel. Note that this was not showing up with the bpf selftest build since tools/include/uapi/asm/bpf_perf_event.h didn't include the powerpc variant. Fixes: a6460b03 ("powerpc/bpf: Fix broken uapi for BPF_PROG_TYPE_PERF_EVENT") Cc: stable@vger.kernel.org # v4.20+ Signed-off-by:Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> [mpe: Use typical naming for header include guard] Signed-off-by:
-
Pali Rohár authored
CZ.NIC Turris 1.0 and 1.1 are open source routers, they have dual-core PowerPC Freescale P2020 CPU and are based on Freescale P2020RDB-PC-A board. Hardware design is fully open source, all firmware and hardware design files are available at Turris project website: https://docs.turris.cz/hw/turris-1x/turris-1x/ https://project.turris.cz/en/hardware.htmlSigned-off-by:
Pali Rohár <pali@kernel.org> Signed-off-by:
-
Juerg Haefliger authored
The convention for indentation seems to be a single tab. Help text is further indented by an additional two whitespaces. Fix the lines that violate these rules. Signed-off-by:
Juerg Haefliger <juergh@canonical.com> Signed-off-by:
-
Juerg Haefliger authored
Replace single quotes with double quotes which seems to be the convention for strings. Signed-off-by:
-
Juerg Haefliger authored
Remove a stray extra empty line. Signed-off-by:
Juerg Haefliger <juerg.haefliger@canonical.com> Signed-off-by:
-
Juerg Haefliger authored
Replace tabs after keywords with whitespaces to be consistent. Signed-off-by:
-
Madhavan Srinivasan authored
struct perf_event_attr supports exclude counting of idle task. This is sent to kernel via perf_event_attr.exclude_idle and in perf tool, user can use ":I" event modifier to enable this for specific event. Monitor Mode Control Register 2 (MMCR2) SPR has control bits for each PMCs to freeze counting based on the Control Register CTRL[RUN] state. CTRL[RUN] is not set when idle task is running. Patch adds a check for event attr.exclude_idle to set MMCR2[FCnWAIT] bit. Signed-off-by:
Madhavan Srinivasan <maddy@linux.ibm.com> Signed-off-by:
-
Alexey Kardashevskiy authored
PowerVM has a stricter policy about allocating TCEs for LPARs and often there is not enough TCEs for 1:1 mapping, this adds the supported numbers into dev_info() to help analyzing bugreports. Signed-off-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by:
-
Alexey Kardashevskiy authored
KVM manages emulated TCE tables for guest LIOBNs by a two level table which maps up to 128TiB with 16MB IOMMU pages (enabled in QEMU by default) and MAX_ORDER=11 (the kernel's default). Note that the last level of the table is allocated when actual TCE is updated. However these tables are created via ioctl() on kvmfd and the userspace can trigger WARN_ON_ONCE_GFP(order >= MAX_ORDER, gfp) in mm/page_alloc.c and flood dmesg. This adds __GFP_NOWARN. Signed-off-by:
-
Hari Bathini authored
This adds two atomic opcodes BPF_XCHG and BPF_CMPXCHG on ppc32, both of which include the BPF_FETCH flag. The kernel's atomic_cmpxchg operation fundamentally has 3 operands, but we only have two register fields. Therefore the operand we compare against (the kernel's API calls it 'old') is hard-coded to be BPF_REG_R0. Also, kernel's atomic_cmpxchg returns the previous value at dst_reg + off. JIT the same for BPF too with return value put in BPF_REG_0. BPF_REG_R0 = atomic_cmpxchg(dst_reg + off, BPF_REG_R0, src_reg); Signed-off-by:
Hari Bathini <hbathini@linux.ibm.com> Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> (ppc64le) Reviewed-by:
-
Hari Bathini authored
Adding instructions for ppc32 for atomic_and atomic_or atomic_xor atomic_fetch_add atomic_fetch_and atomic_fetch_or atomic_fetch_xor Signed-off-by:
-
Hari Bathini authored
This adds two atomic opcodes BPF_XCHG and BPF_CMPXCHG on ppc64, both of which include the BPF_FETCH flag. The kernel's atomic_cmpxchg operation fundamentally has 3 operands, but we only have two register fields. Therefore the operand we compare against (the kernel's API calls it 'old') is hard-coded to be BPF_REG_R0. Also, kernel's atomic_cmpxchg returns the previous value at dst_reg + off. JIT the same for BPF too with return value put in BPF_REG_0. BPF_REG_R0 = atomic_cmpxchg(dst_reg + off, BPF_REG_R0, src_reg); Signed-off-by:
-
Hari Bathini authored
Adding instructions for ppc64 for atomic[64]_fetch_add atomic[64]_fetch_and atomic[64]_fetch_or atomic[64]_fetch_xor Signed-off-by:
-
Hari Bathini authored
Adding instructions for ppc64 for atomic[64]_and atomic[64]_or atomic[64]_xor Signed-off-by:
-
Laurent Dufour authored
There is no need to read the H_BLOCK_REMOVE characteristics when running in Radix mode because this hcall is never called. Furthermore since the commit 387e220a ("powerpc/64s: Move hash MMU support code under CONFIG_PPC_64S_HASH_MMU") define pseries_lpar_read_hblkrm_characteristics as un empty function if CONFIG_PPC_64S_HASH_MMU is not set, the #ifdef block can be removed. Signed-off-by:
Laurent Dufour <ldufour@linux.ibm.com> Signed-off-by:
-
