- 02 Nov, 2016 8 commits
-
-
Tariq Toukan authored
XDP statistics are reported in ethtool, in total and per ring, as follows: - xdp_drop: the number of packets dropped by xdp. - xdp_tx: the number of packets forwarded by xdp. - xdp_tx_full: the number of times an xdp forward failed due to a full tx xdp ring. In addition, all packets that are dropped/forwarded by XDP are no longer accounted in rx_packets/rx_bytes of the ring, so that they count traffic that is passed to the stack. Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tariq Toukan authored
Separately manage the two types of TX rings: regular ones, and XDP. Upon an XDP set, do not borrow regular TX rings and convert them into XDP ones, but allocate new ones, unless we hit the max number of rings. Which means that in systems with smaller #cores we will not consume the current TX rings for XDP, while we are still in the num TX limit. XDP TX rings counters are not shown in ethtool statistics. Instead, XDP counters will be added to the respective RX rings in a downstream patch. This has no performance implications. Signed-off-by:
-
Tariq Toukan authored
Support XDP CQ type, and refactor the CQ type enum. Rename the is_tx field to match the change. Signed-off-by:
-
Xin Long authored
After adding sctp gso, sctp_packet_transmit is a quite big function now. This patch is to extract the codes for packing packet to sctp_packet_pack from sctp_packet_transmit, and add some comments, simplify the err path by freeing auth chunk when freeing packet chunk_list in out path and freeing head skb early if it fails to pack packet. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
David S. Miller authored
Roi Dayan says: ==================== misc TC/flower changes This series includes two small changes to the TC flower classifier. ==================== Signed-off-by: -
Roi Dayan authored
Move common code from fl_delete and fl_detroy to __fl_delete. Signed-off-by:
Roi Dayan <roid@mellanox.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Roi Dayan authored
tcf_unbind was called in fl_delete but was missing in fl_destroy when force deleting flows. Fixes: 77b9900e ('tc: introduce Flower classifier') Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for your net-next tree. This includes better integration with the routing subsystem for nf_tables, explicit notrack support and smaller updates. More specifically, they are: 1) Add fib lookup expression for nf_tables, from Florian Westphal. This new expression provides a native replacement for iptables addrtype and rp_filter matches. This is more flexible though, since we can populate the kernel flowi representation to inquire fib to accomodate new usecases, such as RTBH through skb mark. 2) Introduce rt expression for nf_tables, from Anders K. Pedersen. This new expression allow you to access skbuff route metadata, more specifically nexthop and classid fields. 3) Add notrack support for nf_tables, to skip conntracking, requested by many users already. 4) Add boilerplate code to allow to use nf_log infrastructure from nf_tables ingress. 5) Allow to mangle pkttype from nf_tables prerouting chain, to emulate the xtables cluster match, from Liping Zhang. 6) Move socket lookup code into generic nf_socket_* infrastructure so we can provide a native replacement for the xtables socket match. 7) Make sure nfnetlink_queue data that is updated on every packets is placed in a different cache from read-only data, from Florian Westphal. 8) Handle NF_STOLEN from nf_tables core, also from Florian Westphal. 9) Start round robin number generation in nft_numgen from zero, instead of n-1, for consistency with xtables statistics match, patch from Liping Zhang. 10) Set GFP_NOWARN flag in skbuff netlink allocations in nfnetlink_log, given we retry with a smaller allocation on failure, from Calvin Owens. 11) Cleanup xt_multiport to use switch(), from Gao feng. 12) Remove superfluous check in nft_immediate and nft_cmp, from Liping Zhang. ==================== Signed-off-by:
-
- 01 Nov, 2016 32 commits
-
-
Florian Westphal authored
As the comment indicates, the data at the end of nfqnl_instance struct is written on every queue/dequeue, so it should reside in its own cacheline. Before this change, 'lock' was in first cacheline so we dirtied both. Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Liping Zhang authored
After call nft_data_init, size is already validated and desc.len will not exceed the sizeof(struct nft_data), i.e. 16 bytes. So it will never exceed U8_MAX. Furthermore, in nft_immediate_init, we forget to call nft_data_uninit when desc.len exceeds U8_MAX, although this will not happen, but it's a logical mistake. Now remove these redundant validation introduced by commit 36b701fa ("netfilter: nf_tables: validate maximum value of u32 netlink attributes") Signed-off-by:
Liping Zhang <zlpnobody@gmail.com> Signed-off-by:
-
Anders K. Pedersen authored
Introduces an nftables rt expression for routing related data with support for nexthop (i.e. the directly connected IP address that an outgoing packet is sent to), which can be used either for matching or accounting, eg. # nft add rule filter postrouting \ ip daddr 192.168.1.0/24 rt nexthop != 192.168.0.1 drop This will drop any traffic to 192.168.1.0/24 that is not routed via 192.168.0.1. # nft add rule filter postrouting \ flow table acct { rt nexthop timeout 600s counter } # nft add rule ip6 filter postrouting \ flow table acct { rt nexthop timeout 600s counter } These rules count outgoing traffic per nexthop. Note that the timeout releases an entry if no traffic is seen for this nexthop within 10 minutes. # nft add rule inet filter postrouting \ ether type ip \ flow table acct { rt nexthop timeout 600s counter } # nft add rule inet filter postrouting \ ether type ip6 \ flow table acct { rt nexthop timeout 600s counter } Same as above, but via the inet family, where the ether type must be specified explicitly. "rt classid" is also implemented identical to "meta rtclassid", since it is more logical to have this match in the routing expression going forward. Signed-off-by:Anders K. Pedersen <akp@cohaesio.com> Signed-off-by:
-
Pablo Neira Ayuso authored
We need this split to reuse existing codebase for the upcoming nf_tables socket expression. Signed-off-by: -
Pablo Neira Ayuso authored
Move layer 2 packet logging into nf_log_l2packet() that resides in nf_log_common.c, so this can be shared by both bridge and netdev families. This patch adds the boiler plate code to register the netdev logging family. Signed-off-by: -
Florian Westphal authored
Add FIB expression, supported for ipv4, ipv6 and inet family (the latter just dispatches to ipv4 or ipv6 one based on nfproto). Currently supports fetching output interface index/name and the rtm_type associated with an address. This can be used for adding path filtering. rtm_type is useful to e.g. enforce a strong-end host model where packets are only accepted if daddr is configured on the interface the packet arrived on. The fib expression is a native nftables alternative to the xtables addrtype and rp_filter matches. FIB result order for oif/oifname retrieval is as follows: - if packet is local (skb has rtable, RTF_LOCAL set, this will also catch looped-back multicast packets), set oif to the loopback interface. - if fib lookup returns an error, or result points to local, store zero result. This means '--local' option of -m rpfilter is not supported. It is possible to use 'fib type local' or add explicit saddr/daddr matching rules to create exceptions if this is really needed. - store result in the destination register. In case of multiple routes, search set for desired oif in case strict matching is requested. ipv4 and ipv6 behave fib expressions are supposed to behave the same. [ I have collapsed Arnd Bergmann's ("netfilter: nf_tables: fib warnings") http://patchwork.ozlabs.org/patch/688615/ to address fallout from this patch after rebasing nf-next, that was posted to address compilation warnings. --pablo ] Signed-off-by: -
Wei Yongjun authored
Fix to return a negative error code from the idr_alloc() error handling case instead of 0, as done elsewhere in this function. Also fix the return value check of idr_alloc() since idr_alloc return negative errors on failure, not zero. Fixes: 2ae0f17d ("genetlink: use idr to track families") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
-
David Ahern authored
Enable support for IPv4 multicast: - similar to unicast the flow struct is updated to L3 master device if relevant prior to calling fib_rules_lookup. The table id is saved to the lookup arg so the rule action for ipmr can return the table associated with the device. - ip_mr_forward needs to check for master device mismatch as well since the skb->dev is set to it - allow multicast address on VRF device for Rx by checking for the daddr in the VRF device as well as the original ingress device - on Tx need to drop to __mkroute_output when FIB lookup fails for multicast destination address. - if CONFIG_IP_MROUTE_MULTIPLE_TABLES is enabled VRF driver creates IPMR FIB rules on first device create similar to FIB rules. In addition the VRF driver does not divert IPv4 multicast packets: it breaks on Tx since the fib lookup fails on the mcast address. With this patch, ipmr forwarding and local rx/tx work. Signed-off-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
-
David S. Miller authored
Parthasarathy Bhuvaragan says: ==================== tipc: socket layer improvements The following issues with the current socket layer hinders socket diagnostics implementation, which led to this patch series. 1. tipc socket state is derived from multiple variables like sock->state, tsk->probing_state and tsk->connected. This style forces us to export multiple attributes to the user space, which has to be backward compatible. 2. Abuse of sock->state cannot be exported to user-space without requiring tipc specific hacks in the user-space. - For connection less (CL) sockets sock->state is overloaded to tipc state SS_READY. - For connection oriented (CO) listening socket sock->state is overloaded to tipc state SS_LISTEN. This series is split into four: 1. Bug fixes in patch #1,2,3. 2. Minor cleanups in patch#4-5. 3. Express all tipc states using a single variable in patch#6-8. 4. Migrate the new tipc states to sk->sk_state in patch#9-16. The figures below represents the FSM after this series: Stream Server Listening Socket: +-----------+ +-------------+ | TIPC_OPEN |------>| TIPC_LISTEN | +-----------+ +-------------+ Stream Server Data Socket: +-----------+ +------------------+ | TIPC_OPEN |------>| TIPC_ESTABLISHED | +-----------+ +------------------+ ^ | | | | v +--------------------+ | TIPC_DISCONNECTING | +--------------------+ Stream Socket Client: +-----------+ +-----------------+ | TIPC_OPEN |------>| TIPC_CONNECTING |------+ +-----------+ +-----------------+ | | | | | v | +------------------+ | | TIPC_ESTABLISHED | | +------------------+ | ^ | | | | | | v | +--------------------+ | | TIPC_DISCONNECTING |<--+ +--------------------+ NOTE: This is just a base refractoring required for socket diagnostics. TIPC socket diagnostics support will be introduced in a later series. v2: - remove extra cast and parenthesis as suggested by David S. Miller in #4. - map new tipc state values to tcp states to address Eric Dumazet's concern, thus allow the usage of generic sk_* helpers. This is done in patch#10-15. - remove TIPC_PROBING state and replace it with probe_unacked flag in #11. - replace the TIPC_CLOSING state in v1 with sk_shutdown flag in #14. - introduce __tipc_shutdown() to avoid code duplication in #14. ==================== Signed-off-by: -
Parthasarathy Bhuvaragan authored
In this commit, we replace references to sock->state SS_CONNECTE with sk_state TIPC_ESTABLISHED. Finally, the sock->state is no longer explicitly used by tipc. The FSM below is for various types of connection oriented sockets. Stream Server Listening Socket: +-----------+ +-------------+ | TIPC_OPEN |------>| TIPC_LISTEN | +-----------+ +-------------+ Stream Server Data Socket: +-----------+ +------------------+ | TIPC_OPEN |------>| TIPC_ESTABLISHED | +-----------+ +------------------+ ^ | | | | v +--------------------+ | TIPC_DISCONNECTING | +--------------------+ Stream Socket Client: +-----------+ +-----------------+ | TIPC_OPEN |------>| TIPC_CONNECTING |------+ +-----------+ +-----------------+ | | | | | v | +------------------+ | | TIPC_ESTABLISHED | | +------------------+ | ^ | | | | | | v | +--------------------+ | | TIPC_DISCONNECTING |<--+ +--------------------+ Signed-off-by:Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by:
-
Parthasarathy Bhuvaragan authored
In this commit, we create a new tipc socket state TIPC_CONNECTING by primarily replacing the SS_CONNECTING with TIPC_CONNECTING. There is no functional change in this commit. Signed-off-by:
-
Parthasarathy Bhuvaragan authored
In this commit, we replace the references to SS_DISCONNECTING with the combination of sk_state TIPC_DISCONNECTING and flags set in sk_shutdown. We introduce a new function _tipc_shutdown(), which provides the common code required by tipc_release() and tipc_shutdown(). Signed-off-by:
-
Parthasarathy Bhuvaragan authored
In this commit, we create a new tipc socket state TIPC_DISCONNECTING in sk_state. TIPC_DISCONNECTING is replacing the socket connection status update using SS_DISCONNECTING. TIPC_DISCONNECTING is set for connection oriented sockets at: - tipc_shutdown() - connection probe timeout - when we receive an error message on the connection. There is no functional change in this commit. Signed-off-by:
-
Parthasarathy Bhuvaragan authored
In this commit, we create a new tipc socket state TIPC_OPEN in sk_state. We primarily replace the SS_UNCONNECTED sock->state with TIPC_OPEN. Signed-off-by:
-
Parthasarathy Bhuvaragan authored
Until now, tipc maintains probing state for connected sockets in tsk->probing_state variable. In this commit, we express this information as socket states and this remove the variable. We set probe_unacked flag when a probe is sent out and reset it if we receive a reply. Instead of the probing state TIPC_CONN_OK, we create a new state TIPC_ESTABLISHED. There is no functional change in this commit. Signed-off-by:
-
Parthasarathy Bhuvaragan authored
Until now, tipc maintains the socket state in sock->state variable. This is used to maintain generic socket states, but in tipc we overload it and save tipc socket states like TIPC_LISTEN. Other protocols like TCP, UDP store protocol specific states in sk->sk_state instead. In this commit, we : - declare a new tipc state TIPC_LISTEN, that replaces SS_LISTEN - Create a new function tipc_set_state(), to update sk->sk_state. - TIPC_LISTEN state is maintained in sk->sk_state. - replace references to SS_LISTEN with TIPC_LISTEN. There is no functional change in this commit. Signed-off-by:
-
Parthasarathy Bhuvaragan authored
Until now, tipc socket state SS_READY declares that the socket is a connectionless socket. In this commit, we remove the state SS_READY and replace it with a condition which returns true for datagram / connectionless sockets. Acked-by:
Ying Xue <ying.xue@windriver.com> Acked-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
Parthasarathy Bhuvaragan authored
Until now, probing_intv is a variable in struct tipc_sock but is always set to a constant CONN_PROBING_INTERVAL. The socket connection is probed based on this value. In this commit, we remove this variable and setup the socket timer based on the constant CONN_PROBING_INTERVAL. There is no functional change in this commit. Acked-by:
-
Parthasarathy Bhuvaragan authored
Until now, we determine if a socket is connected or not based on tsk->connected, which is set once when the probing state is set to TIPC_CONN_OK. It is unset when the sock->state is updated from SS_CONNECTED to any other state. In this commit, we remove connected variable from tipc_sock and derive socket connection status from the following condition: sock->state == SS_CONNECTED => tsk->connected There is no functional change in this commit. Acked-by:
-
Parthasarathy Bhuvaragan authored
Until now, for connectionless sockets the peer information during connect is stored in tsk->peer and a connection state is set in tsk->connected. This is redundant. In this commit, for connectionless sockets we update: - __tipc_sendmsg(), when the destination is NULL the peer existence is determined by tsk->peer.family, instead of tsk->connected. - tipc_connect(), remove set/unset of tsk->connected. Hence tsk->connected is no longer used for connectionless sockets. There is no functional change in this commit. Acked-by:
-
Parthasarathy Bhuvaragan authored
Until now, the peer information for connect is stored in tsk->remote but the rest of code uses the name peer for peer/remote. In this commit, we rename tsk->remote to tsk->peer to align with naming convention followed in the rest of the code. There is no functional change in this commit. Acked-by:
-
Parthasarathy Bhuvaragan authored
In this commit, we rename handle to bytes_read indicating the purpose of the member. Signed-off-by:
-
Parthasarathy Bhuvaragan authored
Until now, tipc_accept() calls sk_alloc() with kern=1. This is incorrect as the data socket's owner is the user application. Thus for these accepted data sockets the network namespace refcount is skipped. In this commit, we fix this by setting kern=0. Acked-by:
-
Parthasarathy Bhuvaragan authored
Until now, in filter_connect() when we terminate a connection due to an error message from peer, we set the socket state to DISCONNECTING. The socket is notified about this broken connection using EPIPE when a user tries to send a message. However if a socket was waiting on a poll() while the connection is being terminated, we fail to wakeup that socket. In this commit, we wakeup sleeping sockets at connection termination. Acked-by:
-
Parthasarathy Bhuvaragan authored
Until now, in stream/mcast send() we pass the message to the link layer even when the link is congested and add the socket to the link's wakeup queue. This is unnecessary for non-blocking sockets. If a socket is set to non-blocking and sends multicast with zero back off time while receiving EAGAIN, we exhaust the memory. In this commit, we return immediately at stream/mcast send() for non-blocking sockets. Acked-by:
-
David S. Miller authored
Jakub Kicinski says: ==================== nfp: cleanups and RX path rewrite This series lays groundwork for upcoming XDP support by updating the RX path not to pre-allocate sk_buffs. I start with few cleanups, removal of NFP3200-related code being the most significant. Patch 7 moves to alloc_frag() and build_skb() APIs. Again, a number of small cleanups follow. The set ends with adding support for different number of RX and TX rings. ==================== Signed-off-by: -
Jakub Kicinski authored
We used to always allocate the same number of TX and RX rings so the support for having r_vectors without one of the rings was dropped. That makes us, however, unnecessarily limited to 8 TX rings (8 is the Linux RSS default) most of the time. Also we are about to add channel count configuration via ethtool, so bring that support back. TX rings can now default to num_online_cpus() and RX rings to netif_get_num_default_rss_queues(). Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
Jakub Kicinski authored
num_irqs is not used anywhere, replace it with max_r_vecs which holds number of allocated RX/TX vectors and is going to be useful soon. Signed-off-by:
-
Jakub Kicinski authored
nfp_net_irqs_wanted() doesn't really encapsulate much logic, remove it and inline the calculations. Signed-off-by:
-
Jakub Kicinski authored
Use unsigned int consistently for vector/ring counts. Signed-off-by:
-
Jakub Kicinski authored
We are currently using define for max TX rings to allocate IRQ vectors. It's OK since the max number of rings for TX and RX are currently the same, but lets make the code nicer by taking max of the two. Signed-off-by:
-
Jakub Kicinski authored
We already force ring sizes to be power of 2 so replace modulo operations with AND (size - 1) in index calculations. Signed-off-by:
-
