- 28 Nov, 2006 1 commit
-
-
Adrian Bunk authored
This patch converts drivers/mtd/nand/rtc_from4.c to use the new lib/bitrev.c Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
- 26 Oct, 2006 1 commit
-
-
Ricard Wanderlöf authored
When a flash-based BBT is not used, nand_default_mark_blockbad() is supposed to mark the block bad in the oob. However, it sets the wrong length variable so that no bad block marker is in fact written. This patch attempts to rectify that. (As note, it seems to be that logically, it shouldn't be necessary to set both length variables, as one appears to be for the main buffer, and one for the oob buffer, but this is how it is done in several places, including the code for the mtd character device MEMWRITEOOB and MEMREADOOB ioctls. I'm not sure if this is a temporary solution during some rework of the mtd infrastructure, or whether there is a deeper thought here.) Signed-off-by: Ricard Wanderlöf <ricardw@axis.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
- 22 Oct, 2006 1 commit
-
-
David Woodhouse authored
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
- 21 Oct, 2006 20 commits
-
-
David Woodhouse authored
Ditch the separate oobrbuf and oobwbuf fields from the chip buffers, and use only a single buffer immediately after the data. This accommodates NAND controllers such as the OLPC CAFÉ chip, which can't do scatter/gather DMA so needs the OOB buffer to be contiguous with the data, for both read and write. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
Artem Bityutskiy authored
As flash cannot do 0->1 bit transitions when programming, do not do this in the simulator too. This makes nandsim able to accept subpage writes. Signed-off-by: Artem Bityutskiy <dedekind@infradead.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
David Anders authored
During some testing with several samsung s3c24xx based devices it was discovered that often the cfi_cmdset_0001.c would not leave the chip in read-array mode on suspend. this is an issue if the same flash chip is used for the bootloader that needs to be read on resume. Signed-off-by: David Anders <danders@amltd.com> Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
Artem Bityutskiy authored
Signed-off-by: Artem Bityutskiy <dedekind@infradead.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
Vijay Kumar authored
Removes line break after return type in function definitions, to be consistent with the Linux coding style. Signed-off-by: Vijay Kumar <vijaykumar@bravegnu.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
Vijay Kumar authored
For page wise allocation, an array of flash page pointers is allocated during initialization. The flash pages are themselves allocated when a write occurs to the page. The flash pages are deallocated when they are erased. Signed-off-by: Vijay Kumar <vijaykumar@bravegnu.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
Vijay Kumar authored
This patch removes code that does chip mapping. The chip mapping code is no longer used. Signed-off-by: Vijay Kumar <vijaykumar@bravegnu.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
Yoichi Yuasa authored
This patch has removed ITE 8172G and Globespan IVR MTD support. These boards support have already been removed. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Acked-by: Ralf Bächle <ralf@linux-mips.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
Ricard Wanderlöf authored
1. The ECCGETLAYOUT ioctl copy_to_user() call has a superfluous '&' causing the resulting information to be garbage rather than the intended mtd->ecclayout. 2. The MEMGETOOBSEL misses copying mtd->ecclayout->eccbytes so the resulting field of the returned structure contains garbage. Signed-off-by: Ricard Wanderlöf <ricardw@axis.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
Andrew Victor authored
This version only differs from version posted by Savin Zlobec (20 Jun 2006) in that the AT91RM9200-specific chip-select / bus setup code has been moved from the at91_nand.c driver into the processor-specific file. From: Savin Zlobec <savin@epico.si> Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
Qi Yong authored
typo fix: noticed this typo while reading the patch "jffs2: fix symlink error handling" Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
Alan Cox authored
Fairly self explanatory. Keep a reference initially, drop it when we free up the driver resources. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
Alexey Dobriyan authored
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
Akinobu Mita authored
Use rb_first() and rb_last() to implement frag_first() and frag_last(). Signed-off-by: Akinbou Mita <akinobu.mita@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
Lew Glendenning authored
Add MTD map driver for BIOS flash chips connected to the Intel ESB2 southbridge. [akpm@osdl.org: coding-style fixes, build fix] Signed-off-by: Ryan Jackson <rjackson@lnxi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
Ryan Jackson authored
Add chip driver and JEDEC probe support for the SST 49LF040B flash chip. Signed-off-by: Ryan Jackson <rjackson@lnxi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
Ryan Jackson authored
The 2 bits controlling the window size are often set to allow reading the BIOS, but too small to allow writing, since the lock registers are 4MiB lower in the address space than the data. This is intended to prevent flashing the bios, perhaps accidentally. The bits are 6 and 7. If both bits are set, it is a 5MiB window. If only the 7 Bit is set, it is a 4MiB window. Otherwise, it is a 64KiB window. This parameter allows the driver to override the BIOS settings. Signed-off-by: Ryan Jackson <rjackson@lnxi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
Nicolas Pitre authored
This was apparently missed by the move to the generic IRQ code. Signed-off-by: Nicolas Pitre <nico@cam.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Olaf Hering authored
Use grep instead of make during interface changes. Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
- 20 Oct, 2006 17 commits
-
-
Chandra Seetharaman authored
check_perm() does not drop the reference to the module when kzalloc() failure occurs. Signed-Off-By: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
-
Mark Fasheh authored
The loop within ocfs2_zero_extend() can execute for a long time, causing spurious soft lockup warnings. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
-
Mark Fasheh authored
The page zeroing code was missing the region between old i_size and new i_size for those extends that didn't actually require a change in space allocation. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
-
Sunil Mushran authored
This was causing some folks to incorrectly get -EBUSY during rename. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
-
Akinobu Mita authored
This patch deletes redundant memcmp() while looking up in rb tree. Signed-off-by: Akinbou Mita <akinobu.mita@gmail.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
-
git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds authored
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Fix iounmap argument to const volatile. [MIPS] Reserve syscall numbers for kexec_load. [MIPS] Update tb0287_defconfig [MIPS] Update pnx8550-v2pci_defconfig [MIPS] Update pnx8500-jbs_defconfig [MIPS] More vr41xx pt_regs fixups [MIPS] save_context_stack fix [MIPS] Use compat_sys_mount. [MIPS] Fix O32 personality(2) call with 0xffffffff argument. [MIPS] A few more pt_regs fixups. [MIPS] Malta: Fix uninitialized regs pointer. [MIPS] Delete unneeded pt_regs forward declaration. [MIPS] Use kallsyms_lookup_size_offset() instead of kallsyms_lookup()
-
Linus Torvalds authored
This reverts commit 4596c75c as requested by Olaf Hering. It causes compile errors, and says Olaf: "This change is also wrong, the autoloading works perfect with 2.6.18, no need to add random PCI ids. See commit a0245f7a, platform devices have now a modalias entry in sysfs. The network card is not a PCI device." Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: [CRYPTO] api: Select cryptomgr where needed [CRYPTO] api: fix crypto_alloc_base() return value
-
git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixesLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes: [GFS2] gfs2_dir_read_data(): fix uninitialized variable usage [GFS2] fs/gfs2/ops_fstype.c:fill_super_meta(): fix NULL dereference [GFS2] fs/gfs2/dir.c:gfs2_dir_write_data(): don't use an uninitialized variable [GFS2] fs/gfs2/ops_fstype.c:gfs2_get_sb_meta(): remove unused variable [GFS2] fs/gfs2/dir.c:gfs2_dir_write_data(): remove dead code [GFS2] gfs2 endianness bug: be16 assigned to be32 field [GFS2] Fix bmap to map extents properly [DLM] fix iovec length in recvmsg
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC]: Clean up asm-sparc/elf.h pollution in userspace. [SPARC64]: Fix of_ioremap(). [SPARC64]: Compute dma_end argument to sabre_pbm_init() correctly.
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (36 commits) [Bluetooth] Fix HID disconnect NULL pointer dereference [Bluetooth] Add missing entry for Nokia DTL-4 PCMCIA card [Bluetooth] Add support for newer ANYCOM USB dongles [NET]: Can use __get_cpu_var() instead of per_cpu() in loopback driver. [IPV4] inet_peer: Group together avl_left, avl_right, v4daddr to speedup lookups on some CPUS [TCP]: One NET_INC_STATS() could be NET_INC_STATS_BH in tcp_v4_err() [NETFILTER]: Missing check for CAP_NET_ADMIN in iptables compat layer [NETPOLL]: initialize skb for UDP [IPV6]: Fix route.c warnings when multiple tables are disabled. [TG3]: Bump driver version and release date. [TG3]: Add lower bound checks for tx ring size. [TG3]: Fix set ring params tx ring size implementation [NET]: reduce per cpu ram used for loopback stats [IPv6] route: Fix prohibit and blackhole routing decision [DECNET]: Fix input routing bug [TCP]: Bound TSO defer time [IPv4] fib: Remove unused fib_config members [IPV6]: Always copy rt->u.dst.error when copying a rt6_info. [IPV6]: Make IPV6_SUBTREES depend on IPV6_MULTIPLE_TABLES. [IPV6]: Clean up BACKTRACK(). ...
-
Adrian Bunk authored
Fix one more compile breakage caused by the post -rc1 IRQ changes. Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
NeilBrown authored
This patch is suitable for just about any 2.6 kernel. It should go in 2.6.19 and 2.6.18.2 and possible even the .17 and .16 stable series. This is a long standing bug that seems to have only recently become apparent, presumably due to increasing use of NFS over TCP - many distros seem to be making it the default. The SK_CONN bit gets set when a listening socket may be ready for an accept, just as SK_DATA is set when data may be available. It is entirely possible for svc_tcp_accept to be called with neither of these set. It doesn't happen often but there is a small race in svc_sock_enqueue as SK_CONN and SK_DATA are tested outside the spin_lock. They could be cleared immediately after the test and before the lock is gained. This normally shouldn't be a problem. The sockets are non-blocking so trying to read() or accept() when ther is nothing to do is not a problem. However: svc_tcp_recvfrom makes the decision "Should I accept() or should I read()" based on whether SK_CONN is set or not. This usually works but is not safe. The decision should be based on whether it is a TCP_LISTEN socket or a TCP_CONNECTED socket. Signed-off-by: Neil Brown <neilb@suse.de> Cc: Adrian Bunk <bunk@stusta.de> Cc: <stable@kernel.org> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Alexey Dobriyan authored
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
OGAWA Hirofumi authored
A disk generated some I/O error, after it, I hitted J_ASSERT(transaction->t_updates > 0) in journal_stop(). It seems to happened on ext3_truncate() path from stack trace. Then, maybe the following case may trigger J_ASSERT(transaction->t_updates > 0). ext3_truncate() -> ext3_free_branches() -> ext3_journal_test_restart() -> ext3_journal_restart() -> journal_restart() transaction->t_updates--; /* another process aborted journal */ -> start_this_handle() returns -EROFS without transaction->t_updates++; -> ext3_journal_stop() -> journal_stop() J_ASSERT(transaction->t_updates > 0) If journal was aborted in middle of journal_restart(), ext3_truncate() may trigger J_ASSERT(). Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Nick Piggin authored
Clarify lockorder comments now that sys_msync dropps mmap_sem before calling do_fsync. Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Doug Warzecha authored
Add a size check in smi_data_write to prevent possible wrapping problems with large pos values when calling smi_data_buf_realloc on 32-bit. Signed-off-by: Doug Warzecha <Douglas_Warzecha@dell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-