- 28 Mar, 2014 37 commits
-
-
Erik Hugne authored
The node discovery domain is assigned when a bearer is enabled. In the previous commit we reflect this attribute directly in the bearer structure since it's needed to reinitialize the node discovery mechanism after a hardware address change. There's no need to replicate this attribute anywhere else, so we remove it from the tipc_link_req structure. Signed-off-by:
Erik Hugne <erik.hugne@ericsson.com> Reviewed-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Erik Hugne authored
If the hardware address of a underlying netdevice is changed, it is not enough to simply reset the bearer/links over this device. We also need to reflect this change in the TIPC bearer and node discovery structures aswell. This patch adds the necessary reinitialization of the node disovery mechanism following a hardware address change so that the correct originating media address is advertised in the discovery messages. Signed-off-by:
Dong Liu <dliu.cn@gmail.com> Reviewed-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-nextDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates This series contains updates to e1000e, igb, i40e and i40evf Anjali provides i40e fix to remove the ATR filter on RST as well as FIN packets. Cleans up add_del_fdir() because it was used and implemented only for the add, so change the name and drop a parameter. Adds the ability to drop a flow if we wanted to and adds a flow director message level to be used for flow director specific messages. Mitch fixes an issue on i40evf where the Tx watchdog handler was causing an oops when sending an admin queue message to request a reset because the admin queue functions use spinlocks. Greg provides a change to i40e to make the alloc and free queue vector calls orthogonal. Shannon fixes i40e to verify the eeprom checksum and firmware CRC status bits, and shutdown the driver if they fail. This change stops the processing of traffic, but does not kill the PF netdev so that the NVMUpdate process still has a chance at fixing the image. Also provides a fix to make sure the VSI has a netdev before trying to use it in the debugfs netdev_ops commands. Jakub Kicinski provides patches for e1000e and igb to fix a number issues found in the PTP code. v2: - drop patch 11 "i40e: Add a fallback debug flow for the driver" from the series based on feedback from David Miller ==================== Signed-off-by: -
Byungho An authored
This fixes following: drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c:1828 sxgbe_hw_init() error: potential null dereference 'priv->hw'. (kmalloc returns null) Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Byungho An <bh74.an@samsung.com> Signed-off-by:
-
Byungho An authored
This fixes followings: sparse warnings: (new ones prefixed by >>) >> drivers/net/ethernet/samsung/sxgbe/sxgbe_platform.c:197:5: sparse: symbol 'sxgbe_platform_freeze' was not declared. Should it be static? >> drivers/net/ethernet/samsung/sxgbe/sxgbe_platform.c:204:5: sparse: symbol 'sxgbe_platform_restore' was not declared. Should it be static? >> drivers/net/ethernet/samsung/sxgbe/sxgbe_platform.c:228:24: sparse: symbol 'sxgbe_platform_driver' was not declared. Should it be static? >> drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c:1795:6: sparse: symbol 'sxgbe_get_ops' was not declared. Should it be static? Reported-by:
-
David S. Miller authored
Sathya Perla says: ==================== be2net: add vxlan offload support The first patch adds the FW cmds needed to configure the Skyhawk-R chip for supporting VxLAN offloads. The second patch implements the ndo_add/del_vxlan_port() methods and the plumbing for supporting RX/TX csum, TSO and RSS steering offloads for VxLAN traffic. v2 changes: NETIF_F_SG need not be set for hw_enc_features by the driver as it is done by the stack. v3 changes: * Defer FW cmds needed for VxLAN offloads to a workqueue * Reset FW to VxLAN offloads disabled state in the unload path v4 changes: * Revert the usage of workqueue (introduced in v3) to implement ndo_add/del_vxlan_port() as it is currently not needed (none of the FW cmd calls sleep.) Suggested by David M. ==================== Signed-off-by: -
Sathya Perla authored
This patch mainly implements the add/del_vxlan_port() methods by invoking the needed FW cmds for supporting VxLAN offloads for Skyhawk-R. Signed-off-by:
Sathya Perla <sathya.perla@emulex.com> Signed-off-by:
-
Sathya Perla authored
This patch adds support for the FW cmds needed for VxLAN offloads on Skyhawk-R: 1) The VxLAN UDP port needs to be configured via the port-desc of SET_PROFILE_CONFIG_v1 cmd. This patch re-factors the be_set_profile_config() code (used so far only for setting VF QoS) to be used to set any type of descriptor. 2) The MANAGE_IFACE_FILTERS cmds is needed to convert a normal interface into a tunnel interface. This allows for RSS to work even on the inner TCP/UDP headers of VxLAN traffic. Signed-off-by:
-
Jakub Kicinski authored
igb has a single set of TX time stamping resources per NIC. Use a simple bit lock to avoid race conditions and leaking skbs when multiple TX rings try to claim time stamping. Signed-off-by:
Jakub Kicinski <kubakici@wp.pl> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Jakub Kicinski authored
skb_tx_timestamp() does not report software time stamp if SKBTX_IN_PROGRESS is set. According to timestamping.txt software time stamps are a fallback and should not be generated if hardware time stamp is provided. Move call to skb_tx_timestamp() after setting SKBTX_IN_PROGRESS. Signed-off-by:
-
Jakub Kicinski authored
tx_hwtstamp_skb is always set before work is scheduled, work is cancelled before tx_hwtstamp_skb is set to NULL. PTP work cannot ever see tx_hwtstamp_skb set to NULL. Signed-off-by:
-
Jakub Kicinski authored
Hardware may fail to report time stamp e.g.: - when hardware time stamping is not enabled - when time stamp is requested shortly after ifup Timeout time stamp reading work to prevent it from scheduling itself indefinitely. Report timeout events via system log and device stats. Signed-off-by:
-
Anjali Singhai Jain authored
We don't need to print this info unless at FD message level. Change-ID: I329efdd8e754a0ea0669ec04d12e03db02e6b76e Signed-off-by:
Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by:
Catherine Sullivan <catherine.sullivan@intel.com> Tested-by:
Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by:
-
Anjali Singhai Jain authored
To use for Flow Director specific messages. Change-ID: I69e39a410aa2661f8fd1ed6af0126fa4c335cb77 Signed-off-by:
Shannon Nelson <shannon.nelson@intel.com> Acked-by:
Kevin Scott <kevin.c.scott@intel.com> Signed-off-by:
-
Shannon Nelson authored
Make sure the VSI has a netdev before trying to use it in the debugfs netdev_ops commands. Change-ID: I2d744fc0c32b3226534ce2cde171d9675c5440a6 Signed-off-by:
-
Jesse Brandeburg authored
There were two spaces between return and the value, we only need one. Change-ID: Iaa42c33f50d8d149cdf1a4c9c1902295bfd991c4 Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by:
-
Anjali Singhai Jain authored
With this change we can drop a flow if we wanted to. Change-ID: I222b1ae960e61a31965bafe3159a95099e70c7d2 Signed-off-by:
-
Anjali Singhai Jain authored
Function add_del_fdir was used and implemented only for add. So change the name and drop a parameter. Change-ID: Icf2c6c3bbd4fd00cf8d9613a3f6d8c08e0f8e288 Signed-off-by:
-
Shannon Nelson authored
The driver needs to verify the eeprom checksum and firmware crc status bits, and shutdown the driver if they fail. This code stops the processing of traffic, but doesn't kill the PF netdev so that the NVMUpdate process should still have a chance at fixing the image. The eeprom is checked on driver load and after an EMP reset, the latter of which should be generated after an NVMUpdate. Change-ID: I34deef21d2e16bf5a43c603cf8af27e6a29dc9d2 Signed-off-by:
-
Greg Rose authored
It's annoying to search for a matching alloc and free set of function calls when they don't use the same framework for the name of the functions. Fix that up in the case of alloc and free of vsi queue vectors. i40e_vsi_free_q* i40e_vsi_alloc_q* Change-ID: I510eb863a0fbe405312bebea55c2846c76285e6d Signed-off-by:
Greg Rose <gregory.v.rose@intel.com> Signed-off-by:
-
Mitch Williams authored
The Tx watchdog handler runs in interrupt context, so it would cause an oops when sending an admin queue message to request a reset, because the admin queue functions use spinlocks. Instead, set a flag and let the reset task handle sending the request. Change-ID: I65879470b72963d9c308edfb8f45ac4fbba2c14f Signed-off-by:
Mitch Williams <mitch.a.williams@intel.com> Signed-off-by:
Sibai Li <sibai.li@intel.com> Signed-off-by:
-
Anjali Singhai Jain authored
We currently delete ATR filter on FIN alone, delete on RST as well. Change-ID: Ie7cae5d1046b9d1d4a0d6ef5bdbf41224c3dade6 Signed-off-by:
-
David S. Miller authored
Florian Fainelli says: ==================== net: remove empty MDIO bus reset functions This patchset removes all empty MDIO bus reset functions that we have in the tree (hopefully all of them). This function is optional for the MDIO bus code in drivers/net/phy/mdio_bus.c::mdiobus_register, the documentation is updated to reflect that. Having less call sites to update will allow us to implement a generic BMCR_RESET based PHY reset for MDIO buses that require to reset their PHYs before their PHY detection succeeds (e.g: HiSilicon hip04 current submission) and provide it as a helper. ==================== Signed-off-by: -
Florian Fainelli authored
Update the MDIO bus documentation to mention that the MDIO bus reset function is completely optional. It became optional with commit e1393456 ("[PATCH] PHY Layer fixup") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Florian Fainelli authored
bfin_mdiobus_reset() does nothing useful and is optional for the MDIO bus code, so let's just remove it. Signed-off-by:
-
Florian Fainelli authored
r6040_mdiobus_reset() does nothing useful and is optional for the MDIO bus code, so let's just remove it. Signed-off-by:
-
Florian Fainelli authored
ftgmac100_mdiobus_reset() does nothing useful and is optional for the MDIO bus code, so let's just remove it. Signed-off-by:
-
Florian Fainelli authored
sun4i_mdio_reset() does nothing useful and is optional for the MDIO bus code, so let's just remove it. Signed-off-by:
-
Florian Fainelli authored
xemaclite_mdio_reset() does nothing useful and is optional for the MDIO bus code, so let's just remove it. Signed-off-by:
-
Florian Fainelli authored
orion_mdio_reset() does nothing useful and is optional for the MDIO bus code, so let's just remove it. Signed-off-by:
-
Florian Fainelli authored
fs_enet_fec_mii_reset() does nothing useful and is optional for the MDIO bus code, so let's just remove it. Signed-off-by:
-
Florian Fainelli authored
fec_enet_mdio_reset() does nothing useful and is optional for the MDIO bus code, so let's just remove it. Signed-off-by:
-
Florian Fainelli authored
ethoc_mdio_reset() does nothing useful and is optional for the MDIO bus code, so let's just remove it. Signed-off-by:
-
Florian Fainelli authored
dnet_mdio_reset() does nothing useful and is optional for the MDIO bus code, so let's just remove it. Signed-off-by:
-
Florian Fainelli authored
macb_mdio_reset() does nothing useful and is optional for the MDIO bus code, so let's just remove it. Signed-off-by:
-
Florian Fainelli authored
tg3_mdio_reset() does nothing useful and is optional for the MDIO bus code, so let's just remove it. Signed-off-by:
-
Florian Fainelli authored
greth_mdio_reset() does nothing useful and this function is optional for the MDIO bus code, so let's just remove it. Signed-off-by:
-
- 27 Mar, 2014 3 commits
-
-
Florian Fainelli authored
When the UniMAC block is configured to forward the CRC as part of the Ethernet frame (priv->crc_fwd_en, set by default), enabling the hardware RX checksum block unveiled that the dma_rxchk_bit was never set in the per-packet status bits (dma_flag in bcmgenet_desc_rx). This would make the chksum_ok variable to be never set to 1, and the networking stack would have to compute the packet checksums, which takes a substantial amount of time. In order for the RXCHK block to properly compute the packet checksum in hardware, we also need to set the RBUF_SKIP_FCS bit accordingly. Signed-off-by:
-
Julia Lawall authored
Use del_timer_sync to ensure that the timer is stopped on all CPUs before the driver exists. This change was suggested by Thomas Gleixner The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ declarer name module_exit; identifier ex; @@ module_exit(ex); @@ identifier r.ex; @@ ex(...) { <... - del_timer + del_timer_sync (...) ...> } // </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Julia Lawall authored
Use del_timer_sync to ensure that the timer is stopped on all CPUs before the driver exists. This change was suggested by Thomas Gleixner. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ declarer name module_exit; identifier ex; @@ module_exit(ex); @@ identifier r.ex; @@ ex(...) { <... - del_timer + del_timer_sync (...) ...> } // </smpl> Signed-off-by:
-
