Now we have everything in place and we can allow idmapped mounts
by setting the FS_ALLOW_IDMAP flag. Notice that real availability
of idmapped mounts will depend on the fuse daemon. Fuse daemon
have to set FUSE_ALLOW_IDMAP flag in the FUSE_INIT reply.

To discuss:
- we enable idmapped mounts support only if "default_permissions" mode is
enabled, because otherwise we would need to deal with UID/GID mappings in
the userspace side OR provide the userspace with idmapped
req->in.h.uid/req->in.h.gid values which is not something that we probably
want to. Idmapped mounts philosophy is not about faking caller uid/gid.

Some extra links and examples:

- libfuse support
https://github.com/mihalicyn/libfuse/commits/idmap_support

- fuse-overlayfs support:
https://github.com/mihalicyn/fuse-overlayfs/commits/idmap_support

- cephfs-fuse conversion example
https://github.com/mihalicyn/ceph/commits/fuse_idmap

- glusterfs conversion example
https://github.com/mihalicyn/glusterfs/commits/fuse_idmapSigned-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

It is not possible with the current fuse code, but let's protect ourselves
from regressions in the future.
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

This is needed to properly clear suid/sgid.
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

RENAME_WHITEOUT is a special case of ->rename
and we need to take idmappings into account there.
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

It's just a matter of adjusting a permission check condition
for S_ISGID flag. All the rest is already handled in the generic
VFS code.

Notice that this permission check is the analog of what
we have in posix_acl_update_mode() generic helper, but
fuse doesn't use this helper as on the kernel side we don't
care about ensuring that POSIX ACL and CHMOD permissions are in sync
as it is a responsibility of a userspace daemon to handle that.
For the same reason we don't have a calls to posix_acl_chmod(),
while most of other filesystem do.
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

We don't need to have idmap in the __fuse_get_acl as we don't
have any use for it.

In the current POSIX ACL implementation, idmapped mounts are
taken into account on the userspace/kernel border
(see vfs_set_acl_idmapped_mnt() and vfs_posix_acl_to_xattr()).
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

Need to translate uid and gid in case of chown(2).
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

We only cover the case when "default_permissions" flag
is used. A reason for that is that otherwise all the permission
checks are done in the userspace and we have to deal with
VFS idmapping in the userspace (which is bad), alternatively
we have to provide the userspace with idmapped req->in.h.uid/req->in.h.gid
which is also not align with VFS idmaps philosophy.
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

We have to:
- pass an idmapping to the generic_fillattr()
to properly handle UIG/GID mapping for the userspace.
- pass -/- to fuse_fillattr() (analog of generic_fillattr() in fuse).

Difference between these two is that generic_fillattr() takes all the
stat() data from the inode directly, while fuse_fillattr() codepath takes a
fresh data just from the userspace reply on the FUSE_GETATTR request.

In some cases we can just pass &nop_mnt_idmap, because idmapping won't be
used in these codepaths. For example, when 3rd argument of
fuse_do_getattr() is NULL then idmap argument is not used.
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

We have all the infrastructure in place, we just need
to pass an idmapping here.
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

We don't need to remap parent_gid, but have to adjust
group membership checks and take idmapping into account.
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

If idmap == NULL *and* filesystem daemon declared idmapped mounts
support, then uid/gid values in a fuse header will be -1.

No functional changes intended.
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

Add some preparational changes in fuse_get_req/fuse_force_creds
to handle idmappings.

Miklos suggested [1], [2] to change the meaning of in.h.uid/in.h.gid
fields when daemon declares support for idmapped mounts. In a new semantic,
we fill uid/gid values in fuse header with a id-mapped caller uid/gid (for
requests which create new inodes), for all the rest cases we just send -1
to userspace.

No functional changes intended.

Link: https://lore.kernel.org/all/CAJfpegsVY97_5mHSc06mSw79FehFWtoXT=hhTUK_E-Yhr7OAuQ@mail.gmail.com/ [1]
Link: https://lore.kernel.org/all/CAJfpegtHQsEUuFq1k4ZbTD3E1h-GsrN3PWyv7X8cg6sfU_W2Yw@mail.gmail.com/ [2]
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

Right now we determine if filesystem support vfs idmappings or not basing
on the FS_ALLOW_IDMAP flag presence. This "static" way works perfecly well
for local filesystems like ext4, xfs, btrfs, etc. But for network-like
filesystems like fuse, cephfs this approach is not ideal, because sometimes
proper support of vfs idmaps requires some extensions for the on-wire
protocol, which implies that changes have to be made not only in the Linux
kernel code but also in the 3rd party components like libfuse, cephfs MDS
server and so on.

We have seen that issue during our work on cephfs idmapped mounts [1] with
Christian, but right now I'm working on the idmapped mounts support for
fuse/virtiofs and I think that it is a right time for this extension.

[1] 5ccd8530 ("ceph: handle idmapped mounts in create_request_message()")
Suggested-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

fuse_mount_list doesn't exist, use fuse_conn_list.
Signed-off-by: Aurelien Aptel <aaptel@nvidia.com>
Reviewed-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

I've been timing various fuse operations and it's quite annoying to do
with kprobes.  Add two tracepoints for sending and ending fuse requests
to make it easier to debug and time various operations.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

This change refactors the shared logic in fuse_writepages_fill() and
fuse_writepages_locked() into two separate helper functions,
fuse_writepage_args_page_fill() and fuse_writepage_args_setup().

No functional changes added.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

Before this change, wpa->ia.ff is initialized with an acquired reference
on the fuse file right before it submits the writeback request. If there
are auxiliary writebacks, then the initialization and reference
acquisition needs to also be set before we submit the auxiliary writeback
request.

To make the logic simpler and to pave the way for a subsequent
refactoring of fuse_writepages_fill() and fuse_writepage_locked(), this
change initializes and acquires wpa->ia.ff when the wpa is allocated.

No functional changes added.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

To pave the way for refactoring out the shared logic in
fuse_writepages_fill() and fuse_writepage_locked(), this change converts
the temporary page in fuse_writepages_fill() to use the folio API.

This is similar to the change in commit e0887e09 ("fuse: Convert
fuse_writepage_locked to take a folio"), which converted the tmp page in
fuse_writepage_locked() to use the folio API.

inc_node_page_state() is intentionally preserved here instead of
converting to node_stat_add_folio() since it is updating the stat of the
underlying page and to better maintain API symmetry with
dec_node_page_stat() in fuse_writepage_finish_stat().

No functional changes added.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

Prior to this change, data->ff is checked and if not initialized then
initialized in the fuse_writepages_fill() callback, which gets called
for every dirty page in the address space mapping.

This logic is better placed in the main fuse_writepages() caller where
data.ff is initialized before walking the dirty pages.

No functional changes added.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

Move the logic for updating the bdi and page stats for a finished
writeback into a separate helper function, where it can be called from
both fuse_writepage_finish() and fuse_writepage_add() (in the case
where there is already an auxiliary write request for the page).

No functional changes added.

Suggested by: Jingbo Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

Drop the unused "struct fuse_mount *fm" arg in
fuse_writepage_finish().

No functional changes added.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

In some cases, the fi->writepages may be empty. And there is no need
to check fi->writepages with spin_lock, which may have an impact on
performance due to lock contention. For example, in scenarios where
multiple readers read the same file without any writers, or where
the page cache is not enabled.

Also remove the outdated comment since commit 6b2fb799 ("fuse:
optimize writepages search") has optimize the situation by replacing
list with rb-tree.
Signed-off-by: yangyun <yangyun50@huawei.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

Virtiofs has its own queuing mechanism, but still requests are first queued
on fiq->pending to be immediately dequeued and queued onto the virtio
queue.

The queuing on fiq->pending is unnecessary and might even have some
performance impact due to being a contention point.

Forget requests are handled similarly.

Move the queuing of requests and forgets into the fiq->ops->*.
fuse_iqueue_ops are renamed to reflect the new semantics.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Fixed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Tested-by: Peter-Jan Gootzen <pgootzen@nvidia.com>
Reviewed-by: Peter-Jan Gootzen <pgootzen@nvidia.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

Current design and handling of passthrough is without fuse
caching and with that FUSE_WRITEBACK_CACHE is conflicting.

Fixes: 7dc4e97a ("fuse: introduce FUSE_PASSTHROUGH capability")
Cc: stable@kernel.org # v6.9
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Acked-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

In the case where the aux writeback list is dropped (e.g. the pages
have been truncated or the connection is broken), the stats for
its pages and backing device info need to be updated as well.

Fixes: e2653bd5 ("fuse: fix leaked aux requests")
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Cc: <stable@vger.kernel.org> # v5.1
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

Originally when a stolen page was inserted into fuse's page cache by
fuse_try_move_page(), it would be marked uptodate.  Then
fuse_readpages_end() would call SetPageUptodate() again on the already
uptodate page.

Commit 413e8f01 ("fuse: Convert fuse_readpages_end() to use
folio_end_read()") changed that by replacing the SetPageUptodate() +
unlock_page() combination with folio_end_read(), which does mostly the
same, except it sets the uptodate flag with an xor operation, which in the
above scenario resulted in the uptodate flag being cleared, which in turn
resulted in EIO being returned on the read.

Fix by clearing PG_uptodate instead of setting it in fuse_try_move_page(),
conforming to the expectation of folio_end_read().
Reported-by: Jürg Billeter <j@bitron.ch>
Debugged-by: Matthew Wilcox <willy@infradead.org>
Fixes: 413e8f01 ("fuse: Convert fuse_readpages_end() to use folio_end_read()")
Cc: <stable@vger.kernel.org> # v6.10
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

The memory of struct fuse_file is allocated but not freed
when get_create_ext return error.

Fixes: 3e2b6fdb ("fuse: send security context of inode on file")
Cc: stable@vger.kernel.org # v5.17
Signed-off-by: yangyun <yangyun50@huawei.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

There is a race condition where inflight requests will not be aborted if
they are in the middle of being re-sent when the connection is aborted.

If fuse_resend has already moved all the requests in the fpq->processing
lists to its private queue ("to_queue") and then the connection starts
and finishes aborting, these requests will be added to the pending queue
and remain on it indefinitely.

Fixes: 760eac73 ("fuse: Introduce a new notification type for resend pending requests")
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Cc: <stable@vger.kernel.org> # v6.9
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

The existing code uses min_t(ssize_t, outarg.size, XATTR_LIST_MAX) when
parsing the FUSE daemon's response to a zero-length getxattr/listxattr
request.
On 32-bit kernels, where ssize_t and outarg.size are the same size, this is
wrong: The min_t() will pass through any size values that are negative when
interpreted as signed.
fuse_listxattr() will then return this userspace-supplied negative value,
which callers will treat as an error value.

This kind of bug pattern can lead to fairly bad security bugs because of
how error codes are used in the Linux kernel. If a caller were to convert
the numeric error into an error pointer, like so:

    struct foo *func(...) {
      int len = fuse_getxattr(..., NULL, 0);
      if (len < 0)
        return ERR_PTR(len);
      ...
    }

then it would end up returning this userspace-supplied negative value cast
to a pointer - but the caller of this function wouldn't recognize it as an
error pointer (IS_ERR_VALUE() only detects values in the narrow range in
which legitimate errno values are), and so it would just be treated as a
kernel pointer.

I think there is at least one theoretical codepath where this could happen,
but that path would involve virtio-fs with submounts plus some weird
SELinux configuration, so I think it's probably not a concern in practice.

Cc: stable@vger.kernel.org # v4.9
Fixes: 63401ccd ("fuse: limit xattr returned size")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

Merge tag 'kbuild-fixes-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix RPM package build error caused by an incorrect locale setup

 - Mark modules.weakdep as ghost in RPM package

 - Fix the odd combination of -S and -c in stack protector scripts,
   which is an error with the latest Clang

* tag 'kbuild-fixes-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: Fix '-S -c' in x86 stack protector scripts
  kbuild: rpm-pkg: ghost modules.weakdep file
  kbuild: rpm-pkg: Fix C locale setup

This simplifies the min_t() and max_t() macros by no longer making them
work in the context of a C constant expression.

That means that you can no longer use them for static initializers or
for array sizes in type definitions, but there were only a couple of
such uses, and all of them were converted (famous last words) to use
MIN_T/MAX_T instead.

Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 3a7e02c0 ("minmax: avoid overly complicated constant
expressions in VM code") added the simpler MIN_T/MAX_T macros in order
to avoid some excessive expansion from the rather complicated regular
min/max macros.

The complexity of those macros stems from two issues:

 (a) trying to use them in situations that require a C constant
     expression (in static initializers and for array sizes)

 (b) the type sanity checking

and MIN_T/MAX_T avoids both of these issues.

Now, in the whole (long) discussion about all this, it was pointed out
that the whole type sanity checking is entirely unnecessary for
min_t/max_t which get a fixed type that the comparison is done in.

But that still leaves min_t/max_t unnecessarily complicated due to
worries about the C constant expression case.

However, it turns out that there really aren't very many cases that use
min_t/max_t for this, and we can just force-convert those.

This does exactly that.

Which in turn will then allow for much simpler implementations of
min_t()/max_t().  All the usual "macros in all upper case will evaluate
the arguments multiple times" rules apply.

We should do all the same things for the regular min/max() vs MIN/MAX()
cases, but that has the added complexity of various drivers defining
their own local versions of MIN/MAX, so that needs another level of
fixes first.

Link: https://lore.kernel.org/all/b47fad1d0cf8449886ad148f8c013dae@AcuMS.aculab.com/
Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'ubifs-for-linus-6.11-rc1-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs

Pull UBI and UBIFS updates from Richard Weinberger:

 - Many fixes for power-cut issues by Zhihao Cheng

 - Another ubiblock error path fix

 - ubiblock section mismatch fix

 - Misc fixes all over the place

* tag 'ubifs-for-linus-6.11-rc1-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
  ubi: Fix ubi_init() ubiblock_exit() section mismatch
  ubifs: add check for crypto_shash_tfm_digest
  ubifs: Fix inconsistent inode size when powercut happens during appendant writing
  ubi: block: fix null-pointer-dereference in ubiblock_create()
  ubifs: fix kernel-doc warnings
  ubifs: correct UBIFS_DFS_DIR_LEN macro definition and improve code clarity
  mtd: ubi: Restore missing cleanup on ubi_init() failure path
  ubifs: dbg_orphan_check: Fix missed key type checking
  ubifs: Fix unattached inode when powercut happens in creating
  ubifs: Fix space leak when powercut happens in linking tmpfile
  ubifs: Move ui->data initialization after initializing security
  ubifs: Fix adding orphan entry twice for the same inode
  ubifs: Remove insert_dead_orphan from replaying orphan process
  Revert "ubifs: ubifs_symlink: Fix memleak of inode->i_link in error path"
  ubifs: Don't add xattr inode into orphan area
  ubifs: Fix unattached xattr inode if powercut happens after deleting
  mtd: ubi: avoid expensive do_div() on 32-bit machines
  mtd: ubi: make ubi_class constant
  ubi: eba: properly rollback inside self_check_eba

After a recent change in clang to stop consuming all instances of '-S'
and '-c' [1], the stack protector scripts break due to the kernel's use
of -Werror=unused-command-line-argument to catch cases where flags are
not being properly consumed by the compiler driver:

  $ echo | clang -o - -x c - -S -c -Werror=unused-command-line-argument
  clang: error: argument unused during compilation: '-c' [-Werror,-Wunused-command-line-argument]

This results in CONFIG_STACKPROTECTOR getting disabled because
CONFIG_CC_HAS_SANE_STACKPROTECTOR is no longer set.

'-c' and '-S' both instruct the compiler to stop at different stages of
the pipeline ('-S' after compiling, '-c' after assembling), so having
them present together in the same command makes little sense. In this
case, the test wants to stop before assembling because it is looking at
the textual assembly output of the compiler for either '%fs' or '%gs',
so remove '-c' from the list of arguments to resolve the error.

All versions of GCC continue to work after this change, along with
versions of clang that do or do not contain the change mentioned above.

Cc: stable@vger.kernel.org
Fixes: 4f7fd4d7 ("[PATCH] Add the -fstack-protector option to the CFLAGS")
Fixes: 60a5317f ("x86: implement x86_32 stack protector")
Link: https://github.com/llvm/llvm-project/commit/6461e537815f7fa68cef06842505353cf5600e9c [1]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Since ubiblock_exit() is now called from an init function,
the __exit section no longer makes sense.

Cc: Ben Hutchings <bwh@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202407131403.wZJpd8n2-lkp@intel.com/Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>

Pull turbostat updates from Len Brown:

 - Enable turbostat extensions to add both perf and PMT (Intel
   Platform Monitoring Technology) counters via the cmdline

 - Demonstrate PMT access with built-in support for Meteor Lake's
   Die C6 counter

* tag 'v6.11-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
  tools/power turbostat: version 2024.07.26
  tools/power turbostat: Include umask=%x in perf counter's config
  tools/power turbostat: Document PMT in turbostat.8
  tools/power turbostat: Add MTL's PMT DC6 builtin counter
  tools/power turbostat: Add early support for PMT counters
  tools/power turbostat: Add selftests for added perf counters
  tools/power turbostat: Add selftests for SMI, APERF and MPERF counters
  tools/power turbostat: Move verbose counter messages to level 2
  tools/power turbostat: Move debug prints from stdout to stderr
  tools/power turbostat: Fix typo in turbostat.8
  tools/power turbostat: Add perf added counter example to turbostat.8
  tools/power turbostat: Fix formatting in turbostat.8
  tools/power turbostat: Extend --add option with perf counters
  tools/power turbostat: Group SMI counter with APERF and MPERF
  tools/power turbostat: Add ZERO_ARRAY for zero initializing builtin array
  tools/power turbostat: Replace enum rapl_source and cstate_source with counter_source
  tools/power turbostat: Remove anonymous union from rapl_counter_info_t
  tools/power/turbostat: Switch to new Intel CPU model defines

Pull CXL updates from Dave Jiang:
 "Core:

   - A CXL maturity map has been added to the documentation to detail
     the current state of CXL enabling.

     It provides the status of the current state of various CXL features
     to inform current and future contributors of where things are and
     which areas need contribution.

   - A notifier handler has been added in order for a newly created CXL
     memory region to trigger the abstract distance metrics calculation.

     This should bring parity for CXL memory to the same level vs
     hotplugged DRAM for NUMA abstract distance calculation. The
     abstract distance reflects relative performance used for memory
     tiering handling.

   - An addition for XOR math has been added to address the CXL DPA to
     SPA translation.

     CXL address translation did not support address interleave math
     with XOR prior to this change.

  Fixes:

   - Fix to address race condition in the CXL memory hotplug notifier

   - Add missing MODULE_DESCRIPTION() for CXL modules

   - Fix incorrect vendor debug UUID define

  Misc:

   - A warning has been added to inform users of an unsupported
     configuration when mixing CXL VH and RCH/RCD hierarchies

   - The ENXIO error code has been replaced with EBUSY for inject poison
     limit reached via debugfs and cxl-test support

   - Moving the PCI config read in cxl_dvsec_rr_decode() to avoid
     unnecessary PCI config reads

   - A refactor to a common struct for DRAM and general media CXL
     events"

* tag 'cxl-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
  cxl/core/pci: Move reading of control register to immediately before usage
  cxl: Remove defunct code calculating host bridge target positions
  cxl/region: Verify target positions using the ordered target list
  cxl: Restore XOR'd position bits during address translation
  cxl/core: Fold cxl_trace_hpa() into cxl_dpa_to_hpa()
  cxl/test: Replace ENXIO with EBUSY for inject poison limit reached
  cxl/memdev: Replace ENXIO with EBUSY for inject poison limit reached
  cxl/acpi: Warn on mixed CXL VH and RCH/RCD Hierarchy
  cxl/core: Fix incorrect vendor debug UUID define
  Documentation: CXL Maturity Map
  cxl/region: Simplify cxl_region_nid()
  cxl/region: Support to calculate memory tier abstract distance
  cxl/region: Fix a race condition in memory hotplug notifier
  cxl: add missing MODULE_DESCRIPTION() macros
  cxl/events: Use a common struct for DRAM and General Media events

Pull unicode update from Gabriel Krisman Bertazi:
 "Two small fixes to silence the compiler and static analyzers tools
  from Ben Dooks and Jeff Johnson"

* tag 'unicode-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/krisman/unicode:
  unicode: add MODULE_DESCRIPTION() macros
  unicode: make utf8 test count static