- 10 Jun, 2022 6 commits
-
-
Julia Lawall authored
Spelling mistake (triple letters) in comment. Detected with the help of Coccinelle. Signed-off-by:
Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/20220521111145.81697-77-Julia.Lawall@inria.frSigned-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Julia Lawall authored
Spelling mistake (triple letters) in comment. Detected with the help of Coccinelle. Signed-off-by:
-
Eric Huang authored
Add an new state, RTW89_PHY_DCFO_STATE_HOLD, to keep CFO acceleration after CFO_PERIOD_CNT if the traffic is UL-OFDMA, which is calculated based on RX trigger frame counter. Signed-off-by:
Eric Huang <echuang@realtek.com> Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220608113224.11193-4-pkshih@realtek.com
-
Po Hao Huang authored
Adding this allows us to maintain trigger frame statistics, which is required for our CFO tracking decisions. Signed-off-by:
Po Hao Huang <phhuang@realtek.com> Signed-off-by:
-
Po Hao Huang authored
Define trigger stype of control frame, and its checking function, struct and trigger type within common_info of trigger. Signed-off-by:
-
Minghao Chi authored
release_firmware() checks for NULL pointers internally so checking before calling it is redundant. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Minghao Chi <chi.minghao@zte.com.cn> Acked-by:
Jérôme Pouiller <jerome.pouiller@silabs.com> Signed-off-by:
-
- 08 Jun, 2022 4 commits
-
-
Ping-Ke Shih authored
The BSSID mask of H2C is used to match BSSID of receiving packets. Normally, we set six bits BSSID mask to exactly match BSSID of packets sent by target AP. After we support multiple BSSID, it could connect a nontransmitted BSSID, so we can only match first five bytes of BSSID. That means we could possibly receive other AP's packets if only the last byte of BSSID is different from target AP. Signed-off-by:
-
Andy Shevchenko authored
The status variable assigned only once and used also only once. Replace it's usage by actual value. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Andy Shevchenko authored
Instead of doing simple operations and using an additional variable on stack, utilize strnlen() and reuse len variable. Signed-off-by:
-
Andy Shevchenko authored
Use %*ph format to print small buffer as hex string. Signed-off-by:
-
- 30 May, 2022 16 commits
-
-
Ajay Singh authored
Add support to handle IGTK keys which are required for MFP to FW. Index ID 4 and 5 are used to store the IGTK key. Signed-off-by:
Ajay Singh <ajay.kathat@microchip.com> Signed-off-by:
-
Ajay Singh authored
Enable SAE authentication for AP and STA mode. In STA mode, allow the driver to pass the auth frames which are received from firmware to userspace application(hostapd) so that SAE authentication is offloaded to userspace. Signed-off-by:
-
Ajay Singh authored
Deprecated WEP security for WILC driver as well as in firmware from 15.6 FW release onwards. After WEP security removal, freeup some codespace which helped to add new features like WPA3 etc. Signed-off-by:
-
Ajay Singh authored
For power-up sequence, WILC expects RESET set to high 5ms after making chip_en(enable) so corrected chip power-up sequence by making RESET high. For Power-Down sequence, the correct sequence make RESET and CHIP_EN low without any extra delay. Fixes: ec031ac4 ("wilc1000: Add reset/enable GPIO support to SPI driver") Signed-off-by:
-
Dan Carpenter authored
If the copy_from_user() fails or the user gives invalid date then the correct thing to do is to return a negative error code. (Currently it returns success). I made a copy additional related cleanups: 1) There is no need to check "buffer" for NULL. That's handled by copy_from_user(). 2) The "h2c_len" variable cannot be negative because it is unsigned and because sscanf() does not return negative error codes. Fixes: 610247f4 ("rtlwifi: Improve debugging by using debugfs") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Larry Finger authored
Sparse lists the following: CHECK drivers/net/wireless/realtek/rtw88/rtw8821c.c drivers/net/wireless/realtek/rtw88/rtw8821c.c:1880:22: warning: symbol 'rtw8821c_hw_spec' was not declared. Should it be static? The warning arises because the external declaration for rtw8821c_hw_spec occurs in rtw8821ce.h, which is not included in rtw8821c.h. That line is moved, and the now empty file rtw8821ce.h is deleted. Symbol 'rtw8821c_hw_spec' can be made constant. Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Larry Finger authored
Sparse lists the following: CHECK drivers/net/wireless/realtek/rtw88/rtw8723d.c drivers/net/wireless/realtek/rtw88/rtw8723d.c:2704:22: warning: symbol 'rtw8723d_hw_spec' was not declared. Should it be static? The warning arises because the external declaration for rtw8723d_hw_spec occurs in rtw8723de.h, which is not included in rtw8723d.h. That line is moved, and the now empty file rtw8723de.h is deleted. Symbol 'rtw8723d_hw_spec' can be made constant. Signed-off-by:
-
Larry Finger authored
Sparse reports the following: CHECK drivers/net/wireless/realtek/rtw88/rtw8822c.c drivers/net/wireless/realtek/rtw88/rtw8822c.c:5313:22: warning: symbol 'rtw8822c_hw_spec' was not declared. Should it be static? The warning arises because the external declaration for rtw8822c_hw_spec occurs in rtw8822ce.h, which is not included in rtw8822c.h. That line is moved, and the now empty file rtw8822ce.h is deleted. Symbol 'rtw8822c_hw_spec' can be made constant. Signed-off-by:
-
Larry Finger authored
Sparse lists the following for rtw88: CHECK drivers/net/wireless/realtek/rtw88/rtw8822b.c drivers/net/wireless/realtek/rtw88/rtw8822b.c:2500:22: warning: symbol 'rtw8822b_hw_spec' was not declared. Should it be static? The warning arises because the external declaration for rtw8822b_hw_spec occurs in rtw8822be.h, which is not included in rtw8822b.h. That line is moved, and the now empty file rtw8822be.h is deleted. Symbol 'rtw8822b_hw_spec' can be made constant. Signed-off-by:
-
Po-Hao Huang authored
Add this check to avoid crash by dereferencing a null pointer. When hwscan fails due to no memory or dma failure, the scan flag in ieee80211_local is cleared. So mac80211 determine that it's not hw_scan then calls sw_scan_complete() with null vif, which is also freed during the fail. Signed-off-by:
-
Zong-Zhe Yang authored
Since SAR is more expected to follow U-NII bands to plan subbands, division of 6GHz band is quite different from defined enum of subbands which is used by PHY in most cases. It's hard and painful if we want to keep using the same enum on SAR. So, we introduce another enum for SAR subbands and adjust SAR flow to use it. Besides, since 6GHz SAR subbands won't be divided with edge alignment, some cases will span two SAR subbands. For these cases, we describe them within an array of rtw89_sar_span and take the smaller one between SAR settings of the two subbands. Signed-off-by:
Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by:
-
Ping-Ke Shih authored
RX DCK is receiver DC calibration. To keep good RF performance, do this calibration again if the delta of thermal value from the last calibration is more than 8. Signed-off-by:
-
Ping-Ke Shih authored
This watchdog timeout status bit indicates hardware gets wrong, so run SER L2 flow that calls mac80211 to restart hardware. Signed-off-by:
-
Po Hao Huang authored
Add this check to avoid crash by dereferencing a null pointer. When hwscan fails due to no memory or dma failure, the scan flag in ieee80211_local is cleared. So mac80211 determine that it's not hw_scan then calls sw_scan_complete() with null vif, which is also freed during the fail. Signed-off-by:
-
Po Hao Huang authored
Previously channel maintained by driver could be different from the ones hardware actually is. Restore these variables back to prevent unexpected behavior. Signed-off-by:
-
Bernard Zhao authored
Delete if NULL check before dev_kfree_skb call. This change is to cleanup the code a bit. Signed-off-by:
Bernard Zhao <bernard@vivo.com> Signed-off-by:
-
- 20 May, 2022 14 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-nextJakub Kicinski authored
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for net-next, misc updates and fallout fixes from recent Florian's code rewritting (from last pull request): 1) Use new flowi4_l3mdev field in ip_route_me_harder(), from Martin Willi. 2) Avoid unnecessary GC with a timestamp in conncount, from William Tu and Yifeng Sun. 3) Remove TCP conntrack debugging, from Florian Westphal. 4) Fix compilation warning in ctnetlink, from Florian. * git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next: netfilter: ctnetlink: fix up for "netfilter: conntrack: remove unconfirmed list" netfilter: conntrack: remove pr_debug callsites from tcp tracker netfilter: nf_conncount: reduce unnecessary GC netfilter: Use l3mdev flow key when re-routing mangled packets ==================== Link: https://lore.kernel.org/r/20220519220206.722153-1-pablo@netfilter.orgSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
I missed this in the barrage of GCC 12 warnings. Commit cf2df74e ("net: fix dev_fill_forward_path with pppoe + bridge") changed the pointer into an array. Fixes: d7e6f583 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net") Link: https://lore.kernel.org/r/20220520012555.2262461-1-kuba@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Mat Martineau says: ==================== mptcp: Miscellaneous fixes and a new test case Patches 1 and 3 remove helpers that were iterating over the subflow connection list without proper locking. Iteration was not needed in either case. Patch 2 fixes handling of MP_FAIL timeout, checking for orphaned subflows instead of using the MPTCP socket data lock and connection state. Patch 4 adds a test for MP_FAIL timeout using tc pedit to induce checksum failures. ==================== Link: https://lore.kernel.org/r/20220518220446.209750-1-mathew.j.martineau@linux.intel.comSigned-off-by:
-
Geliang Tang authored
Add the multiple subflows test case for MP_FAIL, to test the MP_FAIL reset case. Use the test_linkfail value to make 1024KB test files. Invoke reset_with_fail() to use 'iptables' and 'tc action pedit' rules to produce the bit flips to trigger the checksum failures on ns2eth2. Add delays on ns2eth1 to make sure more data can translate on ns2eth2. The check_invert flag is enabled in reset_with_fail(), so this test prints out the inverted bytes, instead of the file mismatch errors. Invoke pedit_action_pkts() to get the numbers of the packets edited by the tc pedit actions, and print this numbers to the output. Co-developed-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Geliang Tang <geliang.tang@suse.com> Signed-off-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
-
Mat Martineau authored
The MPTCP socket's conn_list (list of subflows) requires the socket lock to access. The MP_FAIL timeout code added such an access, where it would check the list of subflows both in timer context and (later) in workqueue context where the socket lock is held. Rather than check the list twice, remove the check in the timeout handler and only depend on the check in the workqueue. Also remove the MPTCP_FAIL_NO_RESPONSE flag, since mptcp_mp_fail_no_response() has insignificant overhead and can be checked on each worker run. Fixes: 49fa1919 ("mptcp: reset subflow when MP_FAIL doesn't respond") Reported-by:
-
Mat Martineau authored
MP_FAIL timeout (waiting for a peer to respond to an MP_FAIL with another MP_FAIL) is implemented using the MPTCP socket's sk_timer. That timer is also used at MPTCP socket close, so it's important to not have the two timer users interfere with each other. At MPTCP socket close, all subflows are orphaned before sk_timer is manipulated. By checking the SOCK_DEAD flag on the subflows, each subflow can determine if the timer is safe to alter without acquiring any MPTCP-level lock. This replaces code that was using the mptcp_data_lock and MPTCP-level socket state checks that did not correctly protect the timer. Fixes: 49fa1919 ("mptcp: reset subflow when MP_FAIL doesn't respond") Reviewed-by:
-
Paolo Abeni authored
The mentioned helper requires the msk socket lock, and the current callers don't own it nor can't acquire it, so the access is racy. All the current callers are really checking for infinite mapping fallback, and the latter condition is explicitly tracked by the relevant msk variable: we can safely remove the caller usage - and the caller itself. The issue is present since MP_FAIL implementation, but the fix only applies since the infinite fallback support, ence the somewhat unexpected fixes tag. Fixes: 0530020a ("mptcp: track and update contiguous data status") Acked-and-tested-by:
-
Yuchung Cheng authored
This patch improves TCP PRR loss recovery behavior for a corner case. Previously during PRR conservation-bound mode, it strictly sends the amount equals to the amount newly acked or s/acked. The patch changes s.t. PRR may send additional amount that was banked previously (e.g. application-limited) in the conservation-bound mode, similar to the slow-start mode. This unifies and simplifies the algorithm further and may improve the recovery latency. This change still follow the general packet conservation design principle and always keep inflight/cwnd below the slow start threshold set by the congestion control module. PRR is described in RFC 6937. We'll include this change in the latest revision rfc6937-bis as well. Reported-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20220519003410.2531936-1-ycheng@google.comSigned-off-by:
-
Jakub Kicinski authored
The current title of our section of the documentation is Linux Networking Documentation. Since we're describing a section of Linux Documentation repeating those two words seems redundant. Link: https://lore.kernel.org/r/20220518234346.2088436-1-kuba@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
GCC 12 seems upset that we check ipa_irq against array bound but then proceed, anyway: drivers/net/ipa/ipa_interrupt.c: In function ‘ipa_interrupt_add’: drivers/net/ipa/ipa_interrupt.c:196:27: warning: array subscript 30 is above array bounds of ‘void (*[30])(struct ipa *, enum ipa_irq_id)’ [-Warray-bounds] 196 | interrupt->handler[ipa_irq] = handler; | ~~~~~~~~~~~~~~~~~~^~~~~~~~~ drivers/net/ipa/ipa_interrupt.c:42:27: note: while referencing ‘handler’ 42 | ipa_irq_handler_t handler[IPA_IRQ_COUNT]; | ^~~~~~~ Reviewed-by:Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20220519004417.2109886-1-kuba@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
GCC 12 warns: drivers/net/wwan/iosm/iosm_ipc_protocol_ops.c: In function ‘ipc_protocol_dl_td_process’: drivers/net/wwan/iosm/iosm_ipc_protocol_ops.c:406:13: warning: the comparison will always evaluate as ‘true’ for the address of ‘cb’ will never be NULL [-Waddress] 406 | if (!IPC_CB(skb)) { | ^ Indeed the check seems entirely pointless. Hopefully the other validation checks will catch if the cb is bad, but it can't be NULL. Reviewed-by:M Chetan Kumar <m.chetan.kumar@intel.com> Link: https://lore.kernel.org/r/20220519004342.2109832-1-kuba@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Martin Blumenstingl says: ==================== lantiq_gswip: Two small fixes While updating the Lantiq target in OpenWrt to Linux 5.15 I came across an FDB related error message. While that still needs to be solved I found two other small issues on the way. This series fixes the two minor issues found while revisiting the FDB code in the lantiq_gswip driver: - The first patch fixes the start index used in gswip_port_fdb() to find the entry with the matching bridge. The updated logic is now consistent with the rest of the driver. - The second patch fixes a typo in a dev_err() message. [0] https://lore.kernel.org/netdev/20220517194015.1081632-1-martin.blumenstingl@googlemail.com/ ==================== Link: https://lore.kernel.org/r/20220518220051.1520023-1-martin.blumenstingl@googlemail.comSigned-off-by:
-
Martin Blumenstingl authored
gswip_port_fdb_dump() reads the MAC bridge entries. The error message should say "failed to read mac bridge entry". While here, also add the index to the error print so humans can get to the cause of the problem easier. Acked-by:
Hauke Mehrtens <hauke@hauke-m.de> Reviewed-by:
Vladimir Oltean <olteanv@gmail.com> Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
-
Martin Blumenstingl authored
The first N entries in priv->vlans are reserved for managing ports which are not part of a bridge. Use priv->hw_info->max_ports to consistently access per-bridge entries at index 7. Starting at priv->hw_info->cpu_port (6) is harmless in this case because priv->vlan[6].bridge is always NULL so the comparison result is always false (which results in this entry being skipped). Acked-by:
-
