- 16 Oct, 2007 40 commits
-
-
Randy Dunlap authored
Move AGP and DRM menus into the video graphics support menu. They use 'menuconfig' so that they can all be disabled with one selection. Make the console menu use 'menuconfig' so that it can all be disabled with one selection. Make the frame buffer menu use 'menuconfig' so that it can all be disabled with one selection. Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Acked-by:
Dave Airlie <airlied@linux.ie> Signed-off-by:
Antonino Daplas <adaplas@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Michael Hennerich authored
Blackfin BF54x framebuffer device driver for a SHARP LQ043T1DG01 TFT LCD [adaplas] Add 'fb' suffix to driver name. Move Makefile entry under platform device section Signed-off-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
Bryan Wu <bryan.wu@analog.com> Signed-off-by:
-
Randy Dunlap authored
Add logo.nologo kernel boot option to disable the logo in order to provide more screen space for kernel messages; especially useful when debugging and screen space is more critical. newport_con driver changes are untested. [akpm@linux-foundation.org: cleanups, coding-style fixes] Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
-
Maciej W. Rozycki authored
Add error messages to the probe call. [adaplas] On failure, return actual error value instead of -ENXIO. Signed-off-by:
Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by:
-
Antonino A. Daplas authored
If the i2c ports are to be reversed, I2C_CLASS_HWMON assignment must also be reversed. Signed-off-by:
-
Antonino A. Daplas authored
Various console drivers are able to resize the screen via the con_resize() hook. This hook is also visible in userspace via the TIOCWINSZ, VT_RESIZE and VT_RESIZEX ioctl's. One particular utility, SVGATextMode, expects that con_resize() of the VGA console will always return success even if the resulting screen is not compatible with the hardware. However, this particular behavior of the VGA console, as reported in Kernel Bugzilla Bug 7513, can cause undefined behavior if the user starts with a console size larger than 80x25. To work around this problem, add an extra parameter to con_resize(). This parameter is ignored by drivers except for vgacon. If this parameter is non-zero, then the resize request came from a VT_RESIZE or VT_RESIZEX ioctl and vgacon will always return success. If this parameter is zero, vgacon will return -EINVAL if the requested size is not compatible with the hardware. The latter is the more correct behavior. With this change, SVGATextMode should still work correctly while in-kernel and stty resize calls can expect correct behavior from vgacon. Signed-off-by:
-
Randy Dunlap authored
Move video graphics driver configs to fix menus: Fix FB_PMAGB_B to depend on FB so that the FB menus remain listed in order and indented correctly. Fix FB_IBM_GXT4500 to depend on FB so that the FB menus remain listed in order and indented correctly. The OMAP FB drivers still muck up the FB menu a bit, so I put OMAP drivers at the end of the FB menu. Signed-off-by:
-
Krzysztof Halasa authored
Intel FB: allow odd- and even-field-first in interlaced modes, and proper sync to vertical retrace Signed-off-by:
Krzysztof Halasa <khc@pm.waw.pl> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: <sylvain.meyer@worldonline.fr> Signed-off-by:
-
Krzysztof Halasa authored
Intel FB: the chip adds two halflines automatically in interlaced mode, force even line count for the right timings. Signed-off-by:
-
Krzysztof Halasa authored
Intel FB: obvious changes and corrections Signed-off-by:
-
Krzysztof Halasa authored
Intel FB: whitespace, bracket and other clean-ups Signed-off-by:
-
Maciej W. Rozycki authored
Add error messages to the probe call. While they may rarely trigger, they may be useful when something weird is going on. Also this is good style. [akpm@linux-foundation.org: remove unneeded initialisation] Signed-off-by:
-
Sellout Bessie authored
Make radeonfb work ith the 200m Xpress RC410. In my tests it was terribly unstable and would freeze until I set a refresh rate in the kernel argument to 75. e.g video=radeonfb:1280x800@75 Now it is rock solid. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Andrew Morton authored
mips allmodconfig: ERROR: "font_vga_8x16" [drivers/video/console/newport_con.ko] undefined! Cc: Ralf Baechle <ralf@linux-mips.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Maciej W. Rozycki authored
Add a missing FB dependency to FB_PMAGB_B. Signed-off-by:
-
Krzysztof Helt authored
This patch fixes all errors pointed by the checkpatch.pl script. Signed-off-by:
Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by:
-
Krzysztof Helt authored
This patch replaces busy waiting with the cpu_relax() call. This makes scrolling faster. Signed-off-by:
-
Krzysztof Helt authored
This patch replaces busy waiting with the cpu_relax() call. This makes scrolling faster. Signed-off-by:
-
Krzysztof Helt authored
This patch replaces busy waiting with cpu_relax() call. This makes scrolling faster. Signed-off-by:
-
Jesper Juhl authored
An update to Documentation/fb/00-INDEX is long overdue. This patch adds entries for new files in the directory and removes entries for files that no longer exist. The files are now also sorted alphabetically. Signed-off-by:
Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by:
-
Geert Uytterhoeven authored
ps3fb: Add a `mode' parameter to ps3fb_get_res_table(), as in some cases it should check the full-screen flag of the _new_ video mode instead of the current video mode. This bug caused spurious mode change failures when switching between fullscreen and non-fullscreen modes using fbset, while ps3-video-mode worked fine. Signed-off-by:
Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> CC: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by:
-
Masashi Kimoto authored
Fix the black and white stripes issue with WUXGA monitor via HDMI. It seems that when we use a VESA resolution from boot up, the AV settings driver could not be initialized correctly. In that case we need a dummy packet before VESA setting. [Geert] Refactored to reduce code duplication. Signed-off-by:
-
Pavel Pisa authored
Allow generic frame-buffer code to correctly write texts and blit images for 1, 2 and 4 bit per pixel frame-buffer organizations when pixels in bytes are organized to in opposite order than bytes in long type. Overhead should be reasonable. If option is not selected, than compiler should eliminate completely all overhead. The feature is disabled at compile time if CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set. [adaplas] Convert helper functions to macros if feature is not enabled. Signed-off-by:
Pavel Pisa <pisa@cmp.felk.cvut.cz> Signed-off-by:
-
Antonino A. Daplas authored
There are a few nvidia hardware where the i2c port assignments are reversed, i.e., the 1st i2c port is assigned to the secondary display and the 2nd i2c port to the primary display. In most cases, if only 1 display is attached, or if only 1 flatpanel and 1 analog display is attached, the port reversal is of no consequence. However if 2 flatpanels are attached, it can cause display problems. There is no sane way of determining if the hardware reversed the i2c port assignment, so the simplest fix is to add a boot/module option, "reverse_i2c to explicitly reverse the i2c port. This also restores i2c ordering back to the pre-2.6.22 state. Signed-off-by:
Antonino Daplas <adaplas@gail.com> Signed-off-by:
-
Michal Januszewski authored
Currently, if the refresh rate is not specified, fb_find_mode() returns the first known video mode with the requested resolution, which provides no guarantees wrt the refresh rate. Change this so that the mode with the highest refresh rate is returned when the driver provides a custom video mode database and the monitor limits, and a mode with the safe 60 Hz refresh rate otherwise. Signed-off-by:
Michal Januszewski <spock@gentoo.org> Signed-off-by:
-
Krzysztof Halasa authored
Intel framebuffer now supports interlaced video modes. Signed-off-by:
-
Ilya Yanok authored
Changed things: 1. vmalloc()/vfree() replaced with rvmalloc()/rvfree() (taken from drivers/media/video/se401.c) 2. mmap method implemented (mostly taken from drivers/media/video/se401.c) 3. smem_start and smem_len fields of struct fb_fix_screeninfo initialized. (smem_start initialized with virtual address, don't know if it is really bad...) [adaplas: sparse warning fix] Signed-off-by: -
Krzysztof Helt authored
This patch: - disallows setting of virtual height above 2048 as it does not work for accelerated copyarea and imageblit - fixes blinking of pm2v cursor by pushing cursor outside the display (x=2047) - fixes hardware cursor position on Permedia 2 chips with panning enabled - enables hardware cursor by default Signed-off-by:
-
Krzysztof Helt authored
This patch adds hardware cursor support for the Permedia 2 chip. Signed-off-by:
-
Krzysztof Helt authored
This patch fixes white spaces, redudant definitions and formating in the pm3fb header file. Signed-off-by:
-
Krzysztof Helt authored
This patch removes: - redundant fields from the cirrusfb_regs structure - one redundant header - fixes two includes ("" to <>) Signed-off-by: -
Krzysztof Helt authored
This patch does some "short-range" code improvements like merging identical switch clauses, replacing conditional branches with calculation of values, merging only once-used functions into place they are called from. Signed-off-by:
-
Krzysztof Helt authored
This patch removes unused or redundant fields from cirrusfb_info structure. Signed-off-by:
-
Krzysztof Helt authored
This patch replaces "typedef enum" with "enum type" constructs. Using the typedef is error for the checkpatch.pl script. Signed-off-by:
-
Krzysztof Helt authored
This patch fixes over 850 errors and warnings pointed out by the checkpatch.pl script. Signed-off-by:
-
Krzysztof Helt authored
This patch changes mode selection to always prefer default mode if possible and always honor type of display set by default mode settings. This patch is required in case the same display modes were defined for different panels (e.g. STN and TFT). Signed-off-by:
-
Krzysztof Helt authored
This patch removes lcdcon1 register field from the s3c2410fb_display as all bits are calculated from other fields. Signed-off-by:
-
Krzysztof Helt authored
This patch adds pixelclock field to the s3c2410fb_display structure and make use of it in the driver. The Bast machine defined 9 modes but pixclock and margin values are defined only for the 640x480 modes so I removed other modes. This patch also fixes wrong display type constant for the SMDK2440 board. Signed-off-by:
-
Krzysztof Helt authored
This patch: - moves more display mode preparations to s3c2410fb_check_var() - reduces number of fields in s3c2410fb_info - removes redundant values setting in s3c2410fb_probe() - removes static mach_info pointer - releases fb_info structure in s3c2410fb_remove() - changes s3c2410fb_init to __init from __devinit - fixes few typos in comments and removes unused includes Signed-off-by:
-
Krzysztof Helt authored
This patch replaces <asm/uaccess.h> with <linux/uaccess.h> after the checkpatch.pl hint. The include of <asm/uaccess.h> is removed if the driver does not use it. Signed-off-by:
-
