- 29 Oct, 2021 23 commits
-
-
Luiz Augusto von Dentz authored
This makes hci_suspend_notifier use the hci_*_sync which can be executed synchronously which is allowed in the suspend_notifier and simplifies a lot of the handling since the status of each command can be checked inline so no other work need to be scheduled thus can be performed without using of a state machine. Signed-off-by:
Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org>
-
Luiz Augusto von Dentz authored
This moves the init stages to use the hci_sync infra and in addition to that have the stages as function tables so it is easier to change the command sequence. Signed-off-by:
-
Brian Gix authored
mgmt-tester paths: Set SSP on - Success 2 Set Device ID - SSP off and Power on Signed-off-by:
Brian Gix <brian.gix@intel.com> Signed-off-by:
-
Brian Gix authored
mgmt-test paths: Set Advertising on - Appearance 1 Set Advertising on - Local name 1 Set Advertising on - Name + Appear 1 Set Local Name - Success 2 Set Local Name - Success 3 Add Advertising - Success (Empty ScRsp) Add Advertising - Success (ScRsp appear) Add Advertising - Invalid Params (ScRsp appear long) Add Advertising - Success (Complete name) Add Advertising - Success (Shortened name) Add Advertising - Success (Short name) Add Advertising - Success (Name + data) Add Advertising - Invalid Params (Name + data) Add Advertising - Success (Name+data+appear) Set appearance - BR/EDR LE Set appearance - LE only Add Ext Advertising - Success (Empty ScRsp) Add Ext Advertising - Success (ScRsp appear) Add Ext Advertising - Invalid Params (ScRsp appear long) Add Ext Advertising - Success (Complete name) Add Ext Advertising - Success (Shortened name) Add Ext Advertising - Success (Short name) Add Ext Advertising - Success (Name + data) Add Ext Advertising - Invalid Params (Name + data) Add Ext Advertising - Success (Name+data+appear) Signed-off-by:
-
Brian Gix authored
mgmt-test paths: Set powered on - Privacy and Advertising Set Advertising on - Success 2 Set Advertising on - Appearance 1 Set Advertising on - Local name 1 Set Advertising on - Name + Appear 1 Add Advertising - Success 4 Add Advertising - Success 5 Add Ext Advertising - Success 4 Add Ext Advertising - Success 5 Signed-off-by:
-
Brian Gix authored
mgmt-test paths: Set PHY 2m Success Set PHY coded Succcess Set PHY 1m 2m coded Succcess Set PHY 2m tx success Set PHY 2m rx success Set PHY Invalid Param Start Discovery - (2m, Scan Param) Start Discovery - (coded, Scan Param) Start Discovery - (1m, 2m, coded, Scan Param) Signed-off-by:
-
Brian Gix authored
Uses existing *_sync functions, but made hci_update_name_sync non-static. mgmt-test paths: Set Advertising on - Local name 1 Set Advertising on - Name + Appear 1 Set Local Name - Success 1 Set Local Name - Success 2 Set Local Name - Success 3 Add Advertising - Success (Empty ScRsp) Add Advertising - Success (Complete name) Add Advertising - Success (Shortened name) Add Advertising - Success (Short name) Add Advertising - Success (Name + data) Add Advertising - Invalid Params (Name + data) Add Advertising - Success (Name+data+appear) Read Ext Controller Info 3 Read Ext Controller Info 4 Read Ext Controller Info 5 Add Ext Advertising - Success (Empty ScRsp) Add Ext Advertising - Success (Complete name) Add Ext Advertising - Success (Shortened name) Add Ext Advertising - Success (Short name) Add Ext Advertising - Success (Name + data) Add Ext Advertising - Invalid Params (Name + data) Add Ext Advertising - Success (Name+data+appear) Signed-off-by:
-
Brian Gix authored
Uses existing *_sync functions mgmt-test paths: Read Local OOB Ext Data - Invalid index Read Local OOB Ext Data - Legacy pairing Read Local OOB Ext Data - Success SSP Read Local OOB Ext Data - Success SC Signed-off-by:
-
Brian Gix authored
New functions: hci_read_local_oob_data_sync This function requires all of the data from the cmd cmplt event to be passed up to the caller via the skb. mgmt-tester paths: Read Local OOB Data - Not powered Read Local OOB Data - Legacy pairing Read Local OOB Data - Success SSP Read Local OOB Data - Success SC Signed-off-by:
-
Brian Gix authored
Uses: hci_disable_advertising_sync hci_remove_ext_adv_instance_sync hci_write_le_host_supported_sync hci_setup_ext_adv_instance_sync hci_update_scan_rsp_data_sync Signed-off-by:
-
Brian Gix authored
Synchronous version of MGMT_OP_GET_CLOCK_INFO. Signed-off-by:
-
Brian Gix authored
Synchronous version of MGMT_OP_SET_SECURE_CONN. Signed-off-by:
-
Brian Gix authored
Synchronous version of MGMT_OP_GET_CONN_INFO Implements: hci_read_rssi_sync hci_read_tx_power_sync Signed-off-by:
-
Brian Gix authored
Uses previously written: hci_write_fast_connectable_sync hci_update_scan_sync hci_update_adv_data_sync Signed-off-by:
-
Brian Gix authored
This creates a synchronized Write Fast Connectable call and attaches it to the MGMT_OP_SET_FAST_CONNECTABLE management opcode. Signed-off-by:
-
Luiz Augusto von Dentz authored
This make use of hci_cmd_sync_queue for MGMT_OP_START_DISCOVERY, MGMT_OP_START_SERVICE_DISCOVERY and MGMT_OP_STOP_DISCOVERY to use hci_cmd_sync_queue so they no longer depend on hdev->discov_update work to send any commands. Tested with: tools/mgmt-tester -s "Start Discovery" Test Summary ------------ Start Discovery - Not powered 1 Passed Start Discovery - Invalid parameters 1 Passed Start Discovery - Not supported 1 Passed Start Discovery - Success 1 Passed Start Discovery - Success 2 Passed Start Discovery - Power Off 1 Passed Start Discovery BREDR LE - (Ext Scan Enable) Passed Start Discovery LE - (Ext Scan Enable) Passed Start Discovery LE - (Ext Scan Param) Passed Start Discovery - (2m, Scan Param) Passed Start Discovery - (coded, Scan Param) Passed Start Discovery - (1m, 2m, coded, Scan Param) Passed LL Privacy - Start Discovery 1 (Disable RL) Passed LL Privacy - Start Discovery 2 (Disable RL) Passed Total: 14, Passed: 14 (100.0%), Failed: 0, Not Run: 0 tools/mgmt-tester -s "Start Service" Test Summary ------------ Start Service Discovery - Not powered 1 Passed Start Service Discovery - Invalid parameters 1 Passed Start Service Discovery - Not supported 1 Passed Start Service Discovery - Success 1 Passed Start Service Discovery - Success 2 Passed Total: 5, Passed: 5 (100.0%), Failed: 0, Not Run: 0 tools/mgmt-tester -s "Stop Discovery" Test Summary ------------ Stop Discovery - Success 1 Passed Stop Discovery - BR/EDR (Inquiry) Success 1 Passed Stop Discovery - Rejected 1 Passed Stop Discovery - Invalid parameters 1 Passed Stop Discovery - (Ext Scan Disable) Passed Total: 5, Passed: 5 (100.0%), Failed: 0, Not Run: 0 Signed-off-by:
-
Luiz Augusto von Dentz authored
This make use of hci_cmd_sync_queue when MGMT_SET_POWERED is used so all commands are run within hdev->cmd_sync_work instead of hdev->power_on_work and hdev->power_off_work. In addition to that the power on sequence now takes into account if local IRK needs to be programmed in the resolving list. Tested with: tools/mgmt-tester -s "Set powered" Test Summary ------------ Set powered on - Success Passed Set powered on - Invalid parameters 1 Passed Set powered on - Invalid parameters 2 Passed Set powered on - Invalid parameters 3 Passed Set powered on - Invalid index Passed Set powered on - Privacy and Advertising Passed Set powered off - Success Passed Set powered off - Class of Device Passed Set powered off - Invalid parameters 1 Passed Set powered off - Invalid parameters 2 Passed Set powered off - Invalid parameters 3 Passed Total: 11, Passed: 11 (100.0%), Failed: 0, Not Run: 0 Signed-off-by:
-
Luiz Augusto von Dentz authored
This replaces the use of hci_update_background_scan with hci_update_passive_scan which runs from cmd_work_sync and deal properly with resolving list when LL privacy is enabled. Signed-off-by:
-
Luiz Augusto von Dentz authored
This enables advertising when LL privacy is enabled and changes the command sequence when resolving list is updated to also account for when advertising is enabled using the following sequence: If there are devices to scan: Disable Scanning -> Update Accept List -> use_ll_privacy((Disable Advertising) -> Disable Resolving List -> Update Resolving List -> Enable Resolving List -> (Enable Advertising)) -> Enable Scanning Otherwise: Disable Scanning Errors during the Update Accept List stage are handled gracefully by restoring any previous state (e.g. advertising) and disabling the use of accept list as either accept list or resolving list could not be updated. Tested with: mgmt-tester -s "LL Privacy" Test Summary ------------ LL Privacy - Add Device 1 (Add to WL) Passed LL Privacy - Add Device 2 (Add to RL) Passed LL Privacy - Add Device 3 (Enable RL) Passed LL Privacy - Add Device 4 (2 Devices to WL) Passed LL Privacy - Add Device 5 (2 Devices to RL) Passed LL Privacy - Add Device 6 (RL is full) Passed LL Privacy - Add Device 7 (WL is full) Passed LL Privacy - Add Device 8 (Disable Adv) Passed LL Privacy - Add Device 9 (Multi Adv) Passed LL Privacy - Add Device 10 (Multi Dev and Multi Adv) Passed LL Privacy - Remove Device 1 (Remove from WL) Passed LL Privacy - Remove Device 2 (Remove from RL) Passed LL Privacy - Remove Device 3 (Disable RL) Passed LL Privacy - Remove Device 4 (Disable Adv) Passed LL Privacy - Remove Device 5 (Multi Adv) Passed LL Privacy - Start Discovery 1 (Disable RL) Passed LL Privacy - Start Discovery 2 (Disable RL) Passed Total: 18, Passed: 18 (100.0%), Failed: 0, Not Run: 0 Signed-off-by:
-
Luiz Augusto von Dentz authored
This make use of hci_cmd_sync_queue for the following MGMT commands: Add Device Remove Device Tested with: mgmt-tester -s "Add Device" Test Summary ------------ Add Device - Invalid Params 1 Passed Add Device - Invalid Params 2 Passed Add Device - Invalid Params 3 Passed Add Device - Invalid Params 4 Passed Add Device - Success 1 Passed Add Device - Success 2 Passed Add Device - Success 3 Passed Add Device - Success 4 Passed Add Device - Success 5 Passed Add Device - Success 6 - Add to whitelist Passed Add Device - Success 7 - Add to resolv list Passed Add Device - Success 8 - Enable resolv list Passed Total: 12, Passed: 12 (100.0%), Failed: 0, Not Run: 0 Overall execution time: 0.209 seconds mgmt-tester -s "Remove Device" Test Summary ------------ Remove Device - Invalid Params 1 Passed Remove Device - Invalid Params 2 Passed Remove Device - Invalid Params 3 Passed Remove Device - Success 1 Passed Remove Device - Success 2 Passed Remove Device - Success 3 Passed Remove Device - Success 4 Passed Remove Device - Success 5 Passed Remove Device - Success 6 - All Devices Passed Remove Device - Success 7 - Remove from whitelist Passed Remove Device - Success 8 - Remove from resolv list Passed Total: 11, Passed: 11 (100.0%), Failed: 0, Not Run: 0 Overall execution time: 4.26 seconds Signed-off-by: -
Luiz Augusto von Dentz authored
This make use of hci_cmd_sync_queue for the following MGMT commands: Add Advertising Remove Advertising Add Extended Advertising Parameters Add Extended Advertising Data mgmt-tester -s "Add Advertising" Test Summary ------------ Add Advertising - Failure: LE off Passed Add Advertising - Invalid Params 1 (AD too long) Passed Add Advertising - Invalid Params 2 (Malformed len) Passed Add Advertising - Invalid Params 3 (Malformed len) Passed Add Advertising - Invalid Params 4 (Malformed len) Passed Add Advertising - Invalid Params 5 (AD too long) Passed Add Advertising - Invalid Params 6 (ScRsp too long) Passed Add Advertising - Invalid Params 7 (Malformed len) Passed Add Advertising - Invalid Params 8 (Malformed len) Passed Add Advertising - Invalid Params 9 (Malformed len) Passed Add Advertising - Invalid Params 10 (ScRsp too long) Passed Add Advertising - Rejected (Timeout, !Powered) Passed Add Advertising - Success 1 (Powered, Add Adv Inst) Passed Add Advertising - Success 2 (!Powered, Add Adv Inst) Passed Add Advertising - Success 3 (!Powered, Adv Enable) Passed Add Advertising - Success 4 (Set Adv on override) Passed Add Advertising - Success 5 (Set Adv off override) Passed Add Advertising - Success 6 (Scan Rsp Dta, Adv ok) Passed Add Advertising - Success 7 (Scan Rsp Dta, Scan ok) Passed Add Advertising - Success 8 (Connectable Flag) Passed Add Advertising - Success 9 (General Discov Flag) Passed Add Advertising - Success 10 (Limited Discov Flag) Passed Add Advertising - Success 11 (Managed Flags) Passed Add Advertising - Success 12 (TX Power Flag) Passed Add Advertising - Success 13 (ADV_SCAN_IND) Passed Add Advertising - Success 14 (ADV_NONCONN_IND) Passed Add Advertising - Success 15 (ADV_IND) Passed Add Advertising - Success 16 (Connectable -> on) Passed Add Advertising - Success 17 (Connectable -> off) Passed Add Advertising - Success 18 (Power -> off, Remove) Passed Add Advertising - Success 19 (Power -> off, Keep) Passed Add Advertising - Success 20 (Add Adv override) Passed Add Advertising - Success 21 (Timeout expires) Passed Add Advertising - Success 22 (LE -> off, Remove) Passed Add Advertising - Success (Empty ScRsp) Passed Add Advertising - Success (ScRsp only) Passed Add Advertising - Invalid Params (ScRsp too long) Passed Add Advertising - Success (ScRsp appear) Passed Add Advertising - Invalid Params (ScRsp appear long) Passed Add Advertising - Success (Appear is null) Passed Add Advertising - Success (Name is null) Passed Add Advertising - Success (Complete name) Passed Add Advertising - Success (Shortened name) Passed Add Advertising - Success (Short name) Passed Add Advertising - Success (Name + data) Passed Add Advertising - Invalid Params (Name + data) Passed Add Advertising - Success (Name+data+appear) Passed Total: 47, Passed: 47 (100.0%), Failed: 0, Not Run: 0 Overall execution time: 2.17 seconds mgmt-tester -s "Remove Advertising" Test Summary ------------ Remove Advertising - Invalid Params 1 Passed Remove Advertising - Success 1 Passed Remove Advertising - Success 2 Passed Total: 3, Passed: 3 (100.0%), Failed: 0, Not Run: 0 Overall execution time: 0.0585 seconds mgmt-tester -s "Ext Adv MGMT Params" Test Summary: ------------ Ext Adv MGMT Params - Unpowered Passed Ext Adv MGMT Params - Invalid parameters Passed Ext Adv MGMT Params - Success Passed Ext Adv MGMT Params - (5.0) Success Passed Total: 4, Passed: 4 (100.0%), Failed: 0, Not Run: 0 Overall execution time: 0.0746 seconds mgmt-tester -s "Ext Adv MGMT -" Test Summary ------------ Ext Adv MGMT - Data set without Params Passed Ext Adv MGMT - AD Data (5.0) Invalid parameters Passed Ext Adv MGMT - AD Data (5.0) Success Passed Ext Adv MGMT - AD Scan Response (5.0) Success Passed Total: 4, Passed: 4 (100.0%), Failed: 0, Not Run: 0 Overall execution time: 0.0805 seconds Signed-off-by:
-
Luiz Augusto von Dentz authored
This make use of hci_cmd_sync_queue for the following MGMT commands: Set Device Class Set Device ID Add UUID Remove UUID tools/mgmt-tester -s "Set Device Class" Test Summary ------------ Set Device Class - Success 1 Passed Set Device Class - Success 2 Passed Set Device Class - Invalid parameters 1 Passed Total: 3, Passed: 3 (100.0%), Failed: 0, Not Run: 0 Overall execution time: 0.0599 seconds tools/mgmt-tester -s "Set Device ID" Test Summary ------------ Set Device ID - Success 1 Passed Set Device ID - Success 2 Passed Set Device ID - Disable Passed Set Device ID - Power off and Power on Passed Set Device ID - SSP off and Power on Passed Set Device ID - Invalid Parameter Passed Total: 6, Passed: 6 (100.0%), Failed: 0, Not Run: 0 Overall execution time: 0.107 seconds tools/mgmt-tester -s "Add UUID" Test Summary ------------ Add UUID - UUID-16 1 Passed Add UUID - UUID-16 multiple 1 Passed Add UUID - UUID-16 partial 1 Passed Add UUID - UUID-32 1 Passed Add UUID - UUID-32 multiple 1 Passed Add UUID - UUID-32 partial 1 Passed Add UUID - UUID-128 1 Passed Add UUID - UUID-128 multiple 1 Passed Add UUID - UUID-128 partial 1 Passed Add UUID - UUID mix Passed Total: 10, Passed: 10 (100.0%), Failed: 0, Not Run: 0 Overall execution time: 0.198 seconds tools/mgmt-tester -s "Remove UUID" Test Summary ------------ Remove UUID - Success 1 Passed Remove UUID - All UUID - Success 2 Passed Remove UUID - Power Off - Success 3 Passed Remove UUID - Power Off and On - Success 4 Passed Remove UUID - Not Exist - Invalid Params 1 Passed Total: 5, Passed: 5 (100.0%), Failed: 0, Not Run: 0 Overall execution time: 0.0908 seconds Signed-off-by:
-
Marcel Holtmann authored
The usage of __hci_cmd_sync() within the hdev->setup() callback allows for a nice and simple serialized execution of HCI commands. More importantly it allows for result processing before issueing the next command. With the current usage of hci_req_run() it is possible to batch up commands and execute them, but it is impossible to react to their results or errors. This is an attempt to generalize the hdev->setup() handling and provide a simple way of running multiple HCI commands from a single function context. There are multiple struct work that are decdicated to certain tasks already used right now. It is add a lot of bloat to hci_dev struct and extra handling code. So it might be possible to put all of these behind a common HCI command infrastructure and just execute the HCI commands from the same work context in a serialized fashion. For example updating the white list and resolving list can be done now without having to know the list size ahead of time. Also preparing for suspend or resume shouldn't require a state machine anymore. There are other tasks that should be simplified as well. Signed-off-by:
-
- 28 Oct, 2021 1 commit
-
-
Archie Pusaka authored
If we remove one instance of adv using Set Extended Adv Enable, there is a possibility of issue occurs when processing the Command Complete event. Especially, the adv_info might not be found since we already remove it in hci_req_clear_adv_instance() -> hci_remove_adv_instance(). If that's the case, we will mistakenly proceed to remove all adv instances instead of just one single instance. This patch fixes the issue by checking the content of the HCI command instead of checking whether the adv_info is found. Signed-off-by:
Archie Pusaka <apusaka@chromium.org> Reviewed-by:
Sonny Sasaka <sonnysasaka@chromium.org> Signed-off-by:
-
- 25 Oct, 2021 13 commits
-
-
Sean Wang authored
add MT7921s Bluetooth support Co-developed-by:
Mark-yw Chen <mark-yw.chen@mediatek.com> Signed-off-by:
Sean Wang <sean.wang@mediatek.com> Signed-off-by:
-
Sean Wang authored
The MT7961 SDIO identifier for MediaTek Bluetooth devices were being referred in the MediaTek Bluetooth driver. Co-developed-by:
-
Mark-yw Chen authored
Each packet should be sent out until the device emits the TX_EMPTY signal to the host, that is firmware people suggested to add to meet the actual firmware behavior and that is compatible among all the devices. Co-developed-by:
-
Sean Wang authored
That is a preliminary patch to introduce mt7921s support. Use the register CRPLR to read packet length to make all the devices share the common logic. Co-developed-by:
-
Sean Wang authored
That is a preliminary patch to introduce mt7921s support. Update register CSDIOCSR operation that is suggested from the vendor driver and is compatible to the all devices. Co-developed-by:
-
Sean Wang authored
btmtksdio belongs to WIFI/BT combo chip that would serve two radios in one sdio_irq so that we have to move interrupt service to worker to ensure ISR as short as possible. The worker would serve the both Tx and Rx in a batch to effectively reduce many interrupts to the host and to avoid excessive sdio lock contention between various context (even from WiFi driver) and help to be more efficient to complete command/event transation. Co-developed-by:
-
Sean Wang authored
That is a preliminary patch to introduce mt7921s support. Explicitly set WHISR as write-1-clear method to all devices that is the expected behavior the driver rely on. Co-developed-by:
-
Sean Wang authored
add .set_bdaddr support Signed-off-by:
-
Sean Wang authored
Rely on btmtk module to reduce duplicated code Signed-off-by:
-
Sean Wang authored
Add BT_MTK module that is a preliminary patch to introduce mt7921s support to share the logic betweem btusb and btmtksdio. Signed-off-by:
-
Paul Cercueil authored
The entry "brcm,bcm4330-bt" was listed twice in the table. Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Signed-off-by:
-
Johan Hovold authored
Add the missing bulk-out endpoint sanity check to probe() to avoid division by zero in bfusb_send_frame() in case a malicious device has broken descriptors (or when doing descriptor fuzz testing). Note that USB core will reject URBs submitted for endpoints with zero wMaxPacketSize but that drivers doing packet-size calculations still need to handle this (cf. commit 2548288b ("USB: Fix: Don't skip endpoint descriptors with maxpacket=0")). Cc: stable@vger.kernel.org Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Wang Hai authored
I got a kernel BUG report when doing fault injection test: ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:45! ... RIP: 0010:__list_del_entry_valid.cold+0x12/0x4d ... Call Trace: proto_unregister+0x83/0x220 cmtp_cleanup_sockets+0x37/0x40 [cmtp] cmtp_exit+0xe/0x1f [cmtp] do_syscall_64+0x35/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae If cmtp_init_sockets() in cmtp_init() fails, cmtp_init() still returns success. This will cause a kernel bug when accessing uncreated ctmp related data when the module exits. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Wang Hai <wanghai38@huawei.com> Signed-off-by:
-
- 22 Oct, 2021 1 commit
-
-
Luiz Augusto von Dentz authored
msft_opcode shall be use a vendor ogf (0x3f) but the check was swifting the bits in the wrong order due to a missing parantesis over val & 0xffff, but since the code already checks for values over 0xffff it shall not be necessary to perform that operation it now just removes which makes it work properly when setting opcodes like 0xfce1. Fixes: b8f5482c ("Bluetooth: vhci: Add support for setting msft_opcode and aosp_capable") Signed-off-by:
-
- 20 Oct, 2021 2 commits
-
-
Kyle Copperfield authored
BCM4345 and BCM43455 devices soldered onto the PCB (non-removable), use an UART connection for Bluetooth, such as in the Pinebook Pro, and the advertised btsdio support as an SDIO function is ignored. Reviewed-by:
Dragan Simic <dragan.simic@gmail.com> Signed-off-by:
Kyle Copperfield <kmcopper@danwin1210.me> Signed-off-by:
-
Soenke Huster authored
On the reception of packets with an invalid packet type, the memory of the allocated socket buffers is never freed. Add a default case that frees these to avoid a memory leak. Fixes: afd2daa2 ("Bluetooth: Add support for virtio transport driver") Signed-off-by:
Soenke Huster <soenke.huster@eknoes.de> Signed-off-by:
-
