- 21 Oct, 2021 9 commits
-
-
James Smart authored
If an FC link down transition while PLOGIs are outstanding to fabric well known addresses, outstanding ABTS requests may result in a NULL pointer dereference. Driver unload requests may hang with repeated "2878" log messages. The Link down processing results in ABTS requests for outstanding ELS requests. The Abort WQEs are sent for the ELSs before the driver had set the link state to down. Thus the driver is sending the Abort with the expectation that an ABTS will be sent on the wire. The Abort request is stalled waiting for the link to come up. In some conditions the driver may auto-complete the ELSs thus if the link does come up, the Abort completions may reference an invalid structure. Fix by ensuring that Abort set the flag to avoid link traffic if issued due to conditions where the link failed. Link: https://lore.kernel.org/r/20211020211417.88754-7-jsmart2021@gmail.comCo-developed-by:
Justin Tee <justin.tee@broadcom.com> Signed-off-by:
James Smart <jsmart2021@gmail.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
James Smart authored
A remote nport can stop responding to PLOGI beyond the ELS I/O timeout under some fault conditions. When this happens, the non-response triggers a dev_loss_tmo event from the transport which causes the driver to abort the PLOGI and stop any retries. This was due to a policy in the ELS completion handler whenever an ELS was terminated due to driver request. Revise the ELS completion path to detect PLOGIs that were aborted and allow retries. Link: https://lore.kernel.org/r/20211020211417.88754-6-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
An error is detected with the following report when unloading the driver: "KASAN: use-after-free in lpfc_unreg_rpi+0x1b1b" The NLP_REG_LOGIN_SEND nlp_flag is set in lpfc_reg_fab_ctrl_node(), but the flag is not cleared upon completion of the login. This allows a second call to lpfc_unreg_rpi() to proceed with nlp_rpi set to LPFC_RPI_ALLOW_ERROR. This results in a use after free access when used as an rpi_ids array index. Fix by clearing the NLP_REG_LOGIN_SEND nlp_flag in lpfc_mbx_cmpl_fc_reg_login(). Link: https://lore.kernel.org/r/20211020211417.88754-5-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
Applications determine loop support in part by querying the 'pls' sysfs node. Reporting of 'pls' (Private Loop Support) is derived from the descriptor returned by the COMMON_GET_SLI4_PARAMETERS mailbox command, which is issued during initialization or after a reset. The value of this field may change if there is a dynamic SFP change. The driver currently will not pick up the change as there was no reset scenario. Rework to commonize the sending of the COMMON_GET_SLI4_PARAMETERS command. Add the calling of the routine after receipt of an async event indicating an SFP change. Link: https://lore.kernel.org/r/20211020211417.88754-4-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
A prior patch introduced HBA_NEEDS_CFG_PORT flag logic, but in lpfc_sli_brdrestart_s3() code path, right after HBA_NEEDS_CFG_PORT is set, the phba->hba_flag is cleared in lpfc_sli_brdreset(). Fix by calling lpfc_sli_chipset_init() to wait for successful restart of the HBA in lpfc_host_reset_handler() after lpfc_sli_brdrestart(). lpfc_sli_chipset_init() sets the HBA_NEEDS_CFG_PORT flag so that the lpfc_sli_hba_setup() routine from lpfc_online() will execute lpfc_sli_config_port() initialization step when the brdrestart is successful. Link: https://lore.kernel.org/r/20211020211417.88754-3-jsmart2021@gmail.com Fixes: d2f2547e ("scsi: lpfc: Fix auto sli_mode and its effect on CONFIG_PORT for SLI3") Co-developed-by:
-
James Smart authored
In cases when lpfc_enable_pci_dev() fails, lpfc_printf_log() with LOG_TRACE_EVENT set will call lpfc_dmp_dbg() which uses the phba->port_list_lock. However, phba->port_list_lock does not get initialized until lpfc_setup_driver_resource_phase1(). Thus, any initialization routine with LOG_TRACE_EVENT log message prior to lpfc_setup_driver_resource_phase1() will crash. Revert LOG_TRACE_EVENT back to LOG_INIT for all log messages in routines prior to lpfc_setup_driver_resource_phase1(). Link: https://lore.kernel.org/r/20211020211417.88754-2-jsmart2021@gmail.com CC: Zheyu Ma <zheyuma97@gmail.com> Co-developed-by:
-
Srinivas Kandagatla authored
UFS drivers that probe defer will end up leaking memory allocated for clk and regulator names via kstrdup() because the structure that is holding this memory is allocated via devm_* variants which will be freed during probe defer but the names are never freed. Use same devm_* variant of kstrdup to free the memory allocated to name when driver probe defers. Kmemleak found around 11 leaks on Qualcomm Dragon Board RB5: unreferenced object 0xffff66f243fb2c00 (size 128): comm "kworker/u16:0", pid 7, jiffies 4294893319 (age 94.848s) hex dump (first 32 bytes): 63 6f 72 65 5f 63 6c 6b 00 76 69 72 74 75 61 6c core_clk.virtual 2f 77 6f 72 6b 71 75 65 75 65 2f 73 63 73 69 5f /workqueue/scsi_ backtrace: [<000000006f788cd1>] slab_post_alloc_hook+0x88/0x410 [<00000000cfd1372b>] __kmalloc_track_caller+0x138/0x230 [<00000000a92ab17b>] kstrdup+0xb0/0x110 [<0000000037263ab6>] ufshcd_pltfrm_init+0x1a8/0x500 [<00000000a20a5caa>] ufs_qcom_probe+0x20/0x58 [<00000000a5e43067>] platform_probe+0x6c/0x118 [<00000000ef686e3f>] really_probe+0xc4/0x330 [<000000005b18792c>] __driver_probe_device+0x88/0x118 [<00000000a5d295e8>] driver_probe_device+0x44/0x158 [<000000007e83f58d>] __device_attach_driver+0xb4/0x128 [<000000004bfa4470>] bus_for_each_drv+0x68/0xd0 [<00000000b89a83bc>] __device_attach+0xec/0x170 [<00000000ada2beea>] device_initial_probe+0x14/0x20 [<0000000079921612>] bus_probe_device+0x9c/0xa8 [<00000000d268bf7c>] deferred_probe_work_func+0x90/0xd0 [<000000009ef64bfa>] process_one_work+0x29c/0x788 unreferenced object 0xffff66f243fb2c80 (size 128): comm "kworker/u16:0", pid 7, jiffies 4294893319 (age 94.848s) hex dump (first 32 bytes): 62 75 73 5f 61 67 67 72 5f 63 6c 6b 00 00 00 00 bus_aggr_clk.... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ With this patch no memory leaks are reported. Link: https://lore.kernel.org/r/20210914092214.6468-1-srinivas.kandagatla@linaro.org Fixes: aa497613 ("ufs: Add regulator enable support") Fixes: c6e79dac ("ufs: Add clock initialization support") Reviewed-by:Bart Van Assche <bvanassche@acm.org> Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by:
-
Arnd Bergmann authored
sched_clock() is not meant to be used in portable driver code, and assuming a particular clock frequency is not how this is meant to be used. It also causes a build failure because of a missing header inclusion: drivers/scsi/ufs/ufs-mediatek.c:321:12: error: implicit declaration of function 'sched_clock' [-Werror,-Wimplicit-function-declaration] timeout = sched_clock() + retry_ms * 1000000UL; A better interface to use here ktime_get_mono_fast_ns(), which works mostly like ktime_get() but is safe to use inside of a suspend callback. Link: https://lore.kernel.org/r/20211018132022.2281589-1-arnd@kernel.org Fixes: 9561f584 ("scsi: ufs: mediatek: Support vops pre suspend to disable auto-hibern8") Reviewed-by:Stanley Chu <stanley.chu@mediatek.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Jiapeng Chong authored
This symbol is not used outside of mpt3sas_ctl.c, mark it static. Fixes the following sparse warning: drivers/scsi/mpt3sas/mpt3sas_ctl.c:3988:18: warning: symbol 'mpt3sas_dev_attrs' was not declared. Should it be static? Link: https://lore.kernel.org/r/1634639239-2892-1-git-send-email-jiapeng.chong@linux.alibaba.com Fixes: 1bb3ca27 ("scsi: mpt3sas: Switch to attribute groups") Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Reviewed-by:
Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by:
-
- 19 Oct, 2021 23 commits
-
-
Sreekanth Reddy authored
Add 22.5 Gbps link rate definitions. Link: https://lore.kernel.org/r/20211018070611.26428-1-sreekanth.reddy@broadcom.comReviewed-by:
John Garry <john.garry@huawei.com> Signed-off-by:
Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by:
-
Christoph Hellwig authored
Just use the %pg format specifier instead. Link: https://lore.kernel.org/r/20211018065052.1822500-1-hch@lst.deSigned-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Christoph Hellwig authored
Use the memcpy_{from,to}_bvec() helpers instead of open coding them. Link: https://lore.kernel.org/r/20211018060802.1815982-1-hch@lst.deSigned-off-by: -
Luis Chamberlain authored
We never checked for errors on add_disk() as this function returned void. Now that this is fixed, use the shiny new error handling. Just put the cdrom kref and have the unwinding be done by sr_kref_release(). Link: https://lore.kernel.org/r/20211015233028.2167651-3-mcgrof@kernel.orgReviewed-by:
Luis Chamberlain <mcgrof@kernel.org> Signed-off-by:
-
Luis Chamberlain authored
We never checked for errors on add_disk() as this function returned void. Now that this is fixed, use the shiny new error handling. As with the error handling for device_add() we follow the same logic and just put the device so that cleanup is done via the scsi_disk_release(). Link: https://lore.kernel.org/r/20211015233028.2167651-2-mcgrof@kernel.orgReviewed-by:
-
Mike Christie authored
When userspace changes the LUN's ALUA group, it will set the LUN's group to NULL then to the new group. Before the new group is set, target_alua_state_check() will return 0 and allow the I/O to execute. This has us skip the NULL stage, and just swap in the new group. Link: https://lore.kernel.org/r/20210930020422.92578-6-michael.christie@oracle.comSigned-off-by:
Mike Christie <michael.christie@oracle.com> Signed-off-by:
-
Mike Christie authored
We are only holding the lun_tg_pt_gp_lock in target_alua_state_check() to make sure tg_pt_gp is not freed from under us while we copy the state, delay, ID values. We can instead use RCU here to access the tg_pt_gp. With this patch IOPs can increase up to 10% for jobs like: fio --filename=/dev/sdX --direct=1 --rw=randrw --bs=4k \ --ioengine=libaio --iodepth=64 --numjobs=N when there are multiple sessions (running that fio command to each /dev/sdX or using multipath and there are over 8 paths), or more than 8 queues for the loop or vhost with multiple threads case and numjobs > 8. Link: https://lore.kernel.org/r/20210930020422.92578-5-michael.christie@oracle.comSigned-off-by: -
Mike Christie authored
We can't free the tg_pt_gp in core_alua_set_tg_pt_gp_id() because it's still accessed via configfs. Its release must go through the normal configfs/refcount process. The max alua_tg_pt_gps_count check should probably have been done in core_alua_allocate_tg_pt_gp(), but with the current code userspace could have created 0x0000ffff + 1 groups, but only set the id for 0x0000ffff. Then it could have deleted a group with an ID set, and then set the ID for that extra group and it would work ok. It's unlikely, but just in case this patch continues to allow that type of behavior, and just fixes the kfree() while in use bug. Link: https://lore.kernel.org/r/20210930020422.92578-4-michael.christie@oracle.comSigned-off-by:
-
Mike Christie authored
This patch fixes the following bugs: 1. If there are multiple ordered cmds queued and multiple simple cmds completing, target_restart_delayed_cmds() could be called on different CPUs and each instance could start a ordered cmd. They could then run in different orders than they were queued. 2. target_restart_delayed_cmds() and target_handle_task_attr() can race where: 1. target_handle_task_attr() has passed the simple_cmds == 0 check. 2. transport_complete_task_attr() then decrements simple_cmds to 0. 3. transport_complete_task_attr() runs target_restart_delayed_cmds() and it does not see any cmds on the delayed_cmd_list. 4. target_handle_task_attr() adds the cmd to the delayed_cmd_list. The cmd will then end up timing out. 3. If we are sent > 1 ordered cmds and simple_cmds == 0, we can execute them out of order, because target_handle_task_attr() will hit that simple_cmds check first and return false for all ordered cmds sent. 4. We run target_restart_delayed_cmds() after every cmd completion, so if there is more than 1 simple cmd running, we start executing ordered cmds after that first cmd instead of waiting for all of them to complete. 5. Ordered cmds are not supposed to start until HEAD OF QUEUE and all older cmds have completed, and not just simple. 6. It's not a bug but it doesn't make sense to take the delayed_cmd_lock for every cmd completion when ordered cmds are almost never used. Just replacing that lock with an atomic increases IOPs by up to 10% when completions are spread over multiple CPUs and there are multiple sessions/ mqs/thread accessing the same device. This patch moves the queued delayed handling to a per device work to serialze the cmd executions for each device and adds a new counter to track HEAD_OF_QUEUE and SIMPLE cmds. We can then check the new counter to determine when to run the work on the completion path. Link: https://lore.kernel.org/r/20210930020422.92578-3-michael.christie@oracle.comSigned-off-by: -
Mike Christie authored
We can race where target_handle_task_attr() has put the cmd on the delayed_cmd_list. Then target_restart_delayed_cmds() has removed it and set CMD_T_SENT, but then target_execute_cmd() now clears that bit. This patch moves the clearing to before we've put the cmd on the list. Link: https://lore.kernel.org/r/20210930020422.92578-2-michael.christie@oracle.comReviewed-by:
Lee Duncan <lduncan@suse.com> Signed-off-by:
-
Peter Wang authored
Fix the location of delay for ref-clk gating and ungating in ufs_mtk_setup_ref_clk(). Link: https://lore.kernel.org/r/20211016005802.7729-4-stanley.chu@mediatek.comReviewed-by:
Peter Wang <peter.wang@mediatek.com> Signed-off-by:
-
Stanley Chu authored
Add proper header for using sched_clock(). Link: https://lore.kernel.org/r/20211016005802.7729-3-stanley.chu@mediatek.comSigned-off-by:
-
Stanley Chu authored
Introduce default delay time for gating or ungating reference clock instead of ambiguous magic numbers. The defined value is suitable for all current MediaTek UFS platforms. Link: https://lore.kernel.org/r/20211016005802.7729-2-stanley.chu@mediatek.comSigned-off-by:
-
Bodo Stroesser authored
Tcmu populates the data area (used for communication with userspace) with pages that are allocated by calling alloc_page(GFP_NOIO). Therefore previous content of the allocated pages is exposed to user space. Avoid this by adding __GFP_ZERO flag. Zeroing the pages does (nearly) not affect tcmu throughput, because allocated pages are re-used for the data transfers of later SCSI cmds. Link: https://lore.kernel.org/r/20211013171606.25197-1-bostroesser@gmail.comSigned-off-by:
Bodo Stroesser <bostroesser@gmail.com> Signed-off-by:
-
Varun Prakash authored
Enable Delayed ACK to reduce the number of TCP ACKs. Link: https://lore.kernel.org/r/1634135109-5044-1-git-send-email-varun@chelsio.comSigned-off-by:
Varun Prakash <varun@chelsio.com> Signed-off-by:
-
Varun Prakash authored
Current value of max DataSegmentLength is 8K. T5/T6 adapters support DataSegmentLength upto 16K. Increase max DataSegmentLength. Link: https://lore.kernel.org/r/1634135087-4996-1-git-send-email-varun@chelsio.comSigned-off-by:
-
Ye Bin authored
The following issue was observed running syzkaller: BUG: KASAN: slab-out-of-bounds in memcpy include/linux/string.h:377 [inline] BUG: KASAN: slab-out-of-bounds in sg_copy_buffer+0x150/0x1c0 lib/scatterlist.c:831 Read of size 2132 at addr ffff8880aea95dc8 by task syz-executor.0/9815 CPU: 0 PID: 9815 Comm: syz-executor.0 Not tainted 4.19.202-00874-gfc0fe04215a9 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xe4/0x14a lib/dump_stack.c:118 print_address_description+0x73/0x280 mm/kasan/report.c:253 kasan_report_error mm/kasan/report.c:352 [inline] kasan_report+0x272/0x370 mm/kasan/report.c:410 memcpy+0x1f/0x50 mm/kasan/kasan.c:302 memcpy include/linux/string.h:377 [inline] sg_copy_buffer+0x150/0x1c0 lib/scatterlist.c:831 fill_from_dev_buffer+0x14f/0x340 drivers/scsi/scsi_debug.c:1021 resp_report_tgtpgs+0x5aa/0x770 drivers/scsi/scsi_debug.c:1772 schedule_resp+0x464/0x12f0 drivers/scsi/scsi_debug.c:4429 scsi_debug_queuecommand+0x467/0x1390 drivers/scsi/scsi_debug.c:5835 scsi_dispatch_cmd+0x3fc/0x9b0 drivers/scsi/scsi_lib.c:1896 scsi_request_fn+0x1042/0x1810 drivers/scsi/scsi_lib.c:2034 __blk_run_queue_uncond block/blk-core.c:464 [inline] __blk_run_queue+0x1a4/0x380 block/blk-core.c:484 blk_execute_rq_nowait+0x1c2/0x2d0 block/blk-exec.c:78 sg_common_write.isra.19+0xd74/0x1dc0 drivers/scsi/sg.c:847 sg_write.part.23+0x6e0/0xd00 drivers/scsi/sg.c:716 sg_write+0x64/0xa0 drivers/scsi/sg.c:622 __vfs_write+0xed/0x690 fs/read_write.c:485 kill_bdev:block_device:00000000e138492c vfs_write+0x184/0x4c0 fs/read_write.c:549 ksys_write+0x107/0x240 fs/read_write.c:599 do_syscall_64+0xc2/0x560 arch/x86/entry/common.c:293 entry_SYSCALL_64_after_hwframe+0x49/0xbe We get 'alen' from command its type is int. If userspace passes a large length we will get a negative 'alen'. Switch n, alen, and rlen to u32. Link: https://lore.kernel.org/r/20211013033913.2551004-3-yebin10@huawei.comAcked-by:
Douglas Gilbert <dgilbert@interlog.com> Signed-off-by:
Ye Bin <yebin10@huawei.com> Signed-off-by:
-
Ye Bin authored
The following warning was observed running syzkaller: [ 3813.830724] sg_write: data in/out 65466/242 bytes for SCSI command 0x9e-- guessing data in; [ 3813.830724] program syz-executor not setting count and/or reply_len properly [ 3813.836956] ================================================================== [ 3813.839465] BUG: KASAN: stack-out-of-bounds in sg_copy_buffer+0x157/0x1e0 [ 3813.841773] Read of size 4096 at addr ffff8883cf80f540 by task syz-executor/1549 [ 3813.846612] Call Trace: [ 3813.846995] dump_stack+0x108/0x15f [ 3813.847524] print_address_description+0xa5/0x372 [ 3813.848243] kasan_report.cold+0x236/0x2a8 [ 3813.849439] check_memory_region+0x240/0x270 [ 3813.850094] memcpy+0x30/0x80 [ 3813.850553] sg_copy_buffer+0x157/0x1e0 [ 3813.853032] sg_copy_from_buffer+0x13/0x20 [ 3813.853660] fill_from_dev_buffer+0x135/0x370 [ 3813.854329] resp_readcap16+0x1ac/0x280 [ 3813.856917] schedule_resp+0x41f/0x1630 [ 3813.858203] scsi_debug_queuecommand+0xb32/0x17e0 [ 3813.862699] scsi_dispatch_cmd+0x330/0x950 [ 3813.863329] scsi_request_fn+0xd8e/0x1710 [ 3813.863946] __blk_run_queue+0x10b/0x230 [ 3813.864544] blk_execute_rq_nowait+0x1d8/0x400 [ 3813.865220] sg_common_write.isra.0+0xe61/0x2420 [ 3813.871637] sg_write+0x6c8/0xef0 [ 3813.878853] __vfs_write+0xe4/0x800 [ 3813.883487] vfs_write+0x17b/0x530 [ 3813.884008] ksys_write+0x103/0x270 [ 3813.886268] __x64_sys_write+0x77/0xc0 [ 3813.886841] do_syscall_64+0x106/0x360 [ 3813.887415] entry_SYSCALL_64_after_hwframe+0x44/0xa9 This issue can be reproduced with the following syzkaller log: r0 = openat(0xffffffffffffff9c, &(0x7f0000000040)='./file0\x00', 0x26e1, 0x0) r1 = syz_open_procfs(0xffffffffffffffff, &(0x7f0000000000)='fd/3\x00') open_by_handle_at(r1, &(0x7f00000003c0)=ANY=[@ANYRESHEX], 0x602000) r2 = syz_open_dev$sg(&(0x7f0000000000), 0x0, 0x40782) write$binfmt_aout(r2, &(0x7f0000000340)=ANY=[@ANYBLOB="00000000deff000000000000000000000000000000000000000000000000000047f007af9e107a41ec395f1bded7be24277a1501ff6196a83366f4e6362bc0ff2b247f68a972989b094b2da4fb3607fcf611a22dd04310d28c75039d"], 0x126) In resp_readcap16() we get "int alloc_len" value -1104926854, and then pass the huge arr_len to fill_from_dev_buffer(), but arr is only 32 bytes. This leads to OOB in sg_copy_buffer(). To solve this issue, define alloc_len as u32. Link: https://lore.kernel.org/r/20211013033913.2551004-2-yebin10@huawei.comAcked-by:
-
Colin Ian King authored
The variable retval is being initialized with a value that is never read, it is being updated immediately afterwards. The assignment is redundant and can be removed. Link: https://lore.kernel.org/r/20211013182834.137410-1-colin.king@canonical.comSigned-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
MichelleJin authored
'netdev->priv_flags & IFF_BONDING && netdev->flags & IFF_MASTER' is defined as netif_is_bond_master() in netdevice.h. Replace it to clean up code. Link: https://lore.kernel.org/r/20211015142006.540773-1-shjy180909@gmail.comReviewed-by:
MichelleJin <shjy180909@gmail.com> Signed-off-by:
-
Tyrel Datwyler authored
During driver probe we allocate a dma region for our event pool. Currently, zero is passed for the gfp_flags parameter. Driver probe callbacks are run in process context and we hold no locks so we can sleep here if necessary. Fix by passing GFP_KERNEL explicitly to dma_alloc_coherent(). Link: https://lore.kernel.org/r/1547089149-20577-1-git-send-email-tyreld@linux.vnet.ibm.comReviewed-by:
Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by:
-
Dan Carpenter authored
I intended to move from snprintf() to scnprintf() in the previous patch but I messed up and did not do that. The result of my bug is that it this function could trigger a WARN() if the buffer is too large. Link: https://lore.kernel.org/r/20211013083005.GA8592@kili Fixes: 76a4f7cc ("scsi: mpi3mr: Clean up mpi3mr_print_ioc_info()") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Martin Kepplinger authored
For SD cardreaders it is extremely common not to have a cache. Consequently, the following messages do not point to a real error one could try to fix but rather describe how the disk works: sd 0:0:0:0: [sda] No Caching mode page found sd 0:0:0:0: [sda] Assuming drive cache: write through Print these messages as warnings instead of errors. Link: https://lore.kernel.org/r/20211013075050.3870354-1-martin.kepplinger@puri.smReviewed-by:
Martin Kepplinger <martin.kepplinger@puri.sm> Signed-off-by:
-
- 17 Oct, 2021 8 commits
-
-
Bart Van Assche authored
All SCSI drivers have been converted to use shost_groups and sdev_groups instead of shost_attrs or sdev_attrs. Hence remove shost_attrs and sdev_attrs. Additionally, remove the 'lld_attr_group' members and also the scsi_convert_dev_attrs() function. Link: https://lore.kernel.org/r/20211012233558.4066756-47-bvanassche@acm.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by:
Benjamin Block <bblock@linux.ibm.com> Signed-off-by:
-
Bart Van Assche authored
struct device supports attribute groups directly but does not support struct device_attribute directly. Hence switch to attribute groups. Link: https://lore.kernel.org/r/20211012233558.4066756-46-bvanassche@acm.orgAcked-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Bart Van Assche authored
This patch prepares for removal of the shost_attrs member from struct scsi_host_template. Link: https://lore.kernel.org/r/20211012233558.4066756-45-bvanassche@acm.orgAcked-by:
David Kershner <david.kershner@unisys.com> Acked-by:
-
Bart Van Assche authored
struct device supports attribute groups directly but does not support struct device_attribute directly. Hence switch to attribute groups. Link: https://lore.kernel.org/r/20211012233558.4066756-44-bvanassche@acm.orgSigned-off-by:
-
Bart Van Assche authored
struct device supports attribute groups directly but does not support struct device_attribute directly. Hence switch to attribute groups. Link: https://lore.kernel.org/r/20211012233558.4066756-43-bvanassche@acm.orgSigned-off-by:
-
Bart Van Assche authored
struct device supports attribute groups directly but does not support struct device_attribute directly. Hence switch to attribute groups. Link: https://lore.kernel.org/r/20211012233558.4066756-42-bvanassche@acm.orgSigned-off-by:
-
Bart Van Assche authored
struct device supports attribute groups directly but does not support struct device_attribute directly. Hence switch to attribute groups. Additionally, remove qla_insert_tgt_attrs() and replace it with qla_host_attr_is_visible(). Link: https://lore.kernel.org/r/20211012233558.4066756-41-bvanassche@acm.orgSigned-off-by:
-
Bart Van Assche authored
Since there is no definition for the qla2x00_host_attrs_dm array, remove its declaration. Link: https://lore.kernel.org/r/20211012233558.4066756-40-bvanassche@acm.orgSigned-off-by:
-
