- 27 Sep, 2022 40 commits
-
-
Christoph Hellwig authored
Point the private data to the generic controller structure in preparation of using the common tagset init/exit code and use the chance the cleanup the init_hctx methods a bit. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Sagi Grimberg <sagi@grimberg.me> Reviewed-by:
James Smart <jsmart2021@gmail.com>
-
Christoph Hellwig authored
Also update the sqsize field when capping the queue size, and remove the check a queue size that is larger than sqsize given that sqsize is only initialized from opts->queue_size. Signed-off-by:
-
Christoph Hellwig authored
Use the common helpers to allocate and free the tagsets. To make this work the generic nvme_ctrl now needs to be stored in the hctx private data instead of the nvme_rdma_ctrl. Signed-off-by:
Chaitanya Kulkarni <kch@nvidia.com>
-
Christoph Hellwig authored
Point the private data to the generic controller structure in preparation of using the common tagset init/exit code. Signed-off-by:
-
Christoph Hellwig authored
Use the common helpers to allocate and free the tagsets. To make this work the generic nvme_ctrl now needs to be stored in the hctx private data instead of the nvme_tcp_ctrl. Signed-off-by:
-
Christoph Hellwig authored
Point the private data to the generic controller structure in preparation of using the common tagset init/exit code. Signed-off-by:
-
Christoph Hellwig authored
->nvme_tcp_queue is not used anywhere, so remove it. Signed-off-by:
-
Christoph Hellwig authored
Add common helpers to allocate and tear down the admin and I/O tag sets, including the special queues allocated with them. Signed-off-by:
-
Christoph Hellwig authored
Add Hannes as the nvme-auth maintainer. Signed-off-by:
Hannes Reinecke <hare@suse.de> Reviewed-by:
-
Christoph Hellwig authored
The code to set the result field for the admin and I/O connect commands is not only verbose and duplicated, but also violates the aliasing rules as it accesses both the u16 and u32 members in the union. Add a little helper to sort all that out. Fixes: db1312dd ("nvmet: implement basic In-Band Authentication") Signed-off-by:
-
Christoph Hellwig authored
Mark them as unsigned so that we don't need extra casts, and define them relative to cdword0 instead of requiring extra shifts. Signed-off-by:
-
Christoph Hellwig authored
Currently blktests nvme/002 trips up debugobjects if CONFIG_NVME_AUTH is enabled, but authentication is not on a queue. This is because nvmet_auth_sq_free cancels sq->auth_expired_work unconditionaly, while auth_expired_work is only ever initialized if authentication is enabled for a given controller. Fix this by calling most of what is nvmet_init_auth unconditionally when initializing the SQ, and just do the setting of the result field in the connect command handler. Fixes: db1312dd ("nvmet: implement basic In-Band Authentication") Signed-off-by:
-
zhenwei pi authored
There is only a single call-site of nvmet_tcp_finish_cmd(), this becomes redundant. Remove nvmet_tcp_finish_cmd() and use the original function body instead. Suggested-by:
zhenwei pi <pizhenwei@bytedance.com> Reviewed-by:
-
Varun Prakash authored
ttag is used as an index to get cmd in nvmet_tcp_handle_h2c_data_pdu(), add a bounds check to avoid out-of-bounds access. Signed-off-by:
Varun Prakash <varun@chelsio.com> Reviewed-by:
-
Varun Prakash authored
As per NVMe/TCP transport specification ICReq PDU is the first PDU received by the controller and controller should receive only one ICReq PDU. If controller receives more than one ICReq PDU then this can be considered as fatal error. nvmet-tcp driver does not check for ICReq PDU opcode if queue state is NVMET_TCP_Q_LIVE. In LIVE state ICReq PDU is treated as CapsuleCmd PDU, this can result in abnormal behavior. Add a check for ICReq PDU in nvmet_tcp_done_recv_pdu() to fix this issue. Signed-off-by:
-
zhenwei pi authored
nvmet-tcp frees CMD buffers in nvmet_tcp_uninit_data_in_cmds(), and waits the inflight IO requests in nvmet_sq_destroy(). During wait the inflight IO requests, the callback nvmet_tcp_queue_response() is called from backend after IO complete, this leads a typical Use-After-Free issue like this: BUG: kernel NULL pointer dereference, address: 0000000000000008 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 107f80067 P4D 107f80067 PUD 10789e067 PMD 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 1 PID: 123 Comm: kworker/1:1H Kdump: loaded Tainted: G E 6.0.0-rc2.bm.1-amd64 #15 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Workqueue: nvmet_tcp_wq nvmet_tcp_io_work [nvmet_tcp] RIP: 0010:shash_ahash_digest+0x2b/0x110 Code: 1f 44 00 00 41 57 41 56 41 55 41 54 55 48 89 fd 53 48 89 f3 48 83 ec 08 44 8b 67 30 45 85 e4 74 1c 48 8b 57 38 b8 00 10 00 00 <44> 8b 7a 08 44 29 f8 39 42 0c 0f 46 42 0c 41 39 c4 76 43 48 8b 03 RSP: 0018:ffffc9000051bdd8 EFLAGS: 00010206 RAX: 0000000000001000 RBX: ffff888100ab5470 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff888100ab5470 RDI: ffff888100ab5420 RBP: ffff888100ab5420 R08: ffff8881024d08c8 R09: ffff888103e1b4b8 R10: 8080808080808080 R11: 0000000000000000 R12: 0000000000001000 R13: 0000000000000000 R14: ffff88813412bd4c R15: ffff8881024d0800 FS: 0000000000000000(0000) GS:ffff88883fa40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 0000000104b48000 CR4: 0000000000350ee0 Call Trace: <TASK> nvmet_tcp_io_work+0xa52/0xb52 [nvmet_tcp] ? __switch_to+0x106/0x420 process_one_work+0x1ae/0x380 ? process_one_work+0x380/0x380 worker_thread+0x30/0x360 ? process_one_work+0x380/0x380 kthread+0xe6/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 Separate nvmet_tcp_uninit_data_in_cmds() into two steps: uninit data in cmds <- new step 1 nvmet_sq_destroy(); cancel_work_sync(&queue->io_work); free CMD buffers <- new step 2 Signed-off-by:
-
Keith Busch authored
We've been reporting 2 maps regardless of whether the module parameter asked for anything beyond the default queues. A consequence of this means that blk-mq will reinitialize the all the hardware contexts and io schedulers on every controller reset when the mapping is exactly the same as before. This unnecessary overhead is adding several milliseconds on a reset for environments that don't need it. Report the actual number of mappings in use. Signed-off-by:
Keith Busch <kbusch@kernel.org> Signed-off-by:
-
Rishabh Bhatnagar authored
If swiotlb is force enabled dma_max_mapping_size ends up calling swiotlb_max_mapping_size which takes into account the min align mask for the device. Set the min align mask for nvme driver before calling dma_max_mapping_size while calculating max hw sectors. Signed-off-by:
Rishabh Bhatnagar <risbhat@amazon.com> Signed-off-by:
-
Sagi Grimberg authored
When a discovery controller is disconnected, no AENs will arrive to notify the host about discovery log change events. In order to solve this, send a uevent notification when a persistent discovery controller reconnects. We add a new ctrl flag NVME_CTRL_STARTED_ONCE that will be set on the first start, and consecutive calls will find it set, and send the event to userspace if the controller is a discovery controller. Upon the event reception, userspace will re-read the discovery log page and will act upon changes as it sees fit. Signed-off-by:
Daniel Wagner <dwagner@suse.de> Reviewed-by:
-
Sagi Grimberg authored
We expect to grow a few of these flags for various purposes so make them a proper enumeration. Signed-off-by:
-
Keith Busch authored
The subsystem reset writes to a register, so we have to ensure the device state is capable of handling that otherwise the driver may access unmapped registers. Use the state machine to ensure the subsystem reset doesn't try to write registers on a device already undergoing this type of reset. Link: https://bugzilla.kernel.org/show_bug.cgi?id=214771Signed-off-by:
-
Keith Busch authored
The passthrough commands already have this restriction, but the other operations do not. Require the same capabilities for all users as all of these operations, which include resets and rescans, can be disruptive. Signed-off-by:
-
Keith Busch authored
The firmware revision can change on after a reset so copy the most recent info each time instead of just the first time, otherwise the sysfs firmware_rev entry may contain stale data. Reported-by:
Jeff Lien <jeff.lien@wdc.com> Signed-off-by:
Chao Leng <lengchao@huawei.com> Signed-off-by:
-
Keith Busch authored
If a reset occurs after the scan work attempts to issue a command, the reset may quisce the admin queue, which blocks the scan work's command from dispatching. The scan work will not be able to complete while the queue is quiesced. Meanwhile, the reset work will cancel all outstanding admin tags and wait until all requests have transitioned to idle, which includes the passthrough request. But the passthrough request won't be set to idle until after the scan_work flushes, so we're deadlocked. Fix this by handling the end effects after the request has been freed. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216354Reported-by:
Jonathan Derrick <Jonathan.Derrick@solidigm.com> Signed-off-by:
-
Christoph Hellwig authored
Prepare for storing the blkcg information in the gendisk instead of the request_queue. Signed-off-by:
Andreas Herrmann <aherrmann@suse.de> Acked-by:
Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20220921180501.1539876-18-hch@lst.deSigned-off-by:
Jens Axboe <axboe@kernel.dk>
-
Christoph Hellwig authored
Pass the gendisk to blkcg_schedule_throttle as part of moving the blk-cgroup infrastructure to be gendisk based. Remove the unused !BLK_CGROUP stub while we're at it. Signed-off-by:
-
Christoph Hellwig authored
Pass the gendisk to blkg_destroy_all as part of moving the blk-cgroup infrastructure to be gendisk based. Signed-off-by:
-
Christoph Hellwig authored
Pass the gendisk to blk_throtl_cancel_bios as part of moving the blk-cgroup infrastructure to be gendisk based. Signed-off-by:
-
Christoph Hellwig authored
Pass the gendisk to blk_throtl_register_queue as part of moving the blk-cgroup infrastructure to be gendisk based. Signed-off-by:
-
Christoph Hellwig authored
Pass the gendisk to blk_throtl_init and blk_throtl_exit as part of moving the blk-cgroup infrastructure to be gendisk based. Signed-off-by:
-
Christoph Hellwig authored
Use a local disk variable instead of retrieving the disk and request_queue over and over by various means. Signed-off-by:
-
Christoph Hellwig authored
Pass the gendisk to blk_iocost_init as part of moving the blk-cgroup infrastructure to be gendisk based. Signed-off-by:
-
Christoph Hellwig authored
Just directly dereference the disk name instead of going through multiple hoops to find the same value. Signed-off-by:
-
Christoph Hellwig authored
Pass the gendisk to blk_iolatency_init as part of moving the blk-cgroup infrastructure to be gendisk based. Signed-off-by:
-
Christoph Hellwig authored
Pass the gendisk to blk_ioprio_init and blk_ioprio_exit as part of moving the blk-cgroup infrastructure to be gendisk based. Signed-off-by:
-
Christoph Hellwig authored
Pass the gendisk to blkcg_init_disk and blkcg_exit_disk as part of moving the blk-cgroup infrastructure to be gendisk based. Also remove the rather pointless kerneldoc comments for these internal functions with a single caller each. Signed-off-by:
-
Christoph Hellwig authored
The combinations of an error check with an ERR_PTR return and a lookup with a NULL return leads to ugly handling of the return values in the callers. Just open coding the check and the lookup is much simpler. Signed-off-by:
-
Christoph Hellwig authored
Add a fully inlined blkg_lookup as the extra two checks aren't going to generated a lot more code vs the call to the slowpath routine, and open code the hint update in the two callers that care. Signed-off-by:
-
Christoph Hellwig authored
Use blkg_lookup instead of open coding it. Signed-off-by:
-
Christoph Hellwig authored
Just open code it in the only caller and drop the unused !BLK_CGROUP stub. Signed-off-by:
-
