If fi->fib_metrics could not be allocated in fib_create_info()
we attempt to dereference a NULL pointer in free_fib_info_rcu() :

    m = fi->fib_metrics;
    if (m != &dst_default_metrics && atomic_dec_and_test(&m->refcnt))
            kfree(m);

Before my recent patch, we used to call kfree(NULL) and nothing wrong
happened.

Instead of using RCU to defer freeing while we are under memory stress,
it seems better to take immediate action.

This was reported by syzkaller team.

Fixes: 3fb07daf ("ipv4: add reference counting to metrics")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Based on a syzkaller report [1], I found that a per cpu allocation
failure in snmp6_alloc_dev() would then lead to NULL dereference in
ip6_route_dev_notify().

It seems this is a very old bug, thus no Fixes tag in this submission.

Let's add in6_dev_put_clear() helper, as we will probably use
it elsewhere (once available/present in net-next)

[1]
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
   (ftrace buffer empty)
Modules linked in:
CPU: 1 PID: 17294 Comm: syz-executor6 Not tainted 4.13.0-rc2+ #10
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
task: ffff88019f456680 task.stack: ffff8801c6e58000
RIP: 0010:__read_once_size include/linux/compiler.h:250 [inline]
RIP: 0010:atomic_read arch/x86/include/asm/atomic.h:26 [inline]
RIP: 0010:refcount_sub_and_test+0x7d/0x1b0 lib/refcount.c:178
RSP: 0018:ffff8801c6e5f1b0 EFLAGS: 00010202
RAX: 0000000000000037 RBX: dffffc0000000000 RCX: ffffc90005d25000
RDX: ffff8801c6e5f218 RSI: ffffffff82342bbf RDI: 0000000000000001
RBP: ffff8801c6e5f240 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 1ffff10038dcbe37
R13: 0000000000000006 R14: 0000000000000001 R15: 00000000000001b8
FS:  00007f21e0429700(0000) GS:ffff8801dc100000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001ddbc22000 CR3: 00000001d632b000 CR4: 00000000001426e0
DR0: 0000000020000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000600
Call Trace:
 refcount_dec_and_test+0x1a/0x20 lib/refcount.c:211
 in6_dev_put include/net/addrconf.h:335 [inline]
 ip6_route_dev_notify+0x1c9/0x4a0 net/ipv6/route.c:3732
 notifier_call_chain+0x136/0x2c0 kernel/notifier.c:93
 __raw_notifier_call_chain kernel/notifier.c:394 [inline]
 raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401
 call_netdevice_notifiers_info+0x51/0x90 net/core/dev.c:1678
 call_netdevice_notifiers net/core/dev.c:1694 [inline]
 rollback_registered_many+0x91c/0xe80 net/core/dev.c:7107
 rollback_registered+0x1be/0x3c0 net/core/dev.c:7149
 register_netdevice+0xbcd/0xee0 net/core/dev.c:7587
 register_netdev+0x1a/0x30 net/core/dev.c:7669
 loopback_net_init+0x76/0x160 drivers/net/loopback.c:214
 ops_init+0x10a/0x570 net/core/net_namespace.c:118
 setup_net+0x313/0x710 net/core/net_namespace.c:294
 copy_net_ns+0x27c/0x580 net/core/net_namespace.c:418
 create_new_namespaces+0x425/0x880 kernel/nsproxy.c:107
 unshare_nsproxy_namespaces+0xae/0x1e0 kernel/nsproxy.c:206
 SYSC_unshare kernel/fork.c:2347 [inline]
 SyS_unshare+0x653/0xfa0 kernel/fork.c:2297
 entry_SYSCALL_64_fastpath+0x1f/0xbe
RIP: 0033:0x4512c9
RSP: 002b:00007f21e0428c08 EFLAGS: 00000216 ORIG_RAX: 0000000000000110
RAX: ffffffffffffffda RBX: 0000000000718150 RCX: 00000000004512c9
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000062020200
RBP: 0000000000000086 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000216 R12: 00000000004b973d
R13: 00000000ffffffff R14: 000000002001d000 R15: 00000000000002dd
Code: 50 2b 34 82 c7 00 f1 f1 f1 f1 c7 40 04 04 f2 f2 f2 c7 40 08 f3 f3
f3 f3 e8 a1 43 39 ff 4c 89 f8 48 8b 95 70 ff ff ff 48 c1 e8 03 <0f> b6
0c 18 4c 89 f8 83 e0 07 83 c0 03 38 c8 7c 08 84 c9 0f 85
RIP: __read_once_size include/linux/compiler.h:250 [inline] RSP:
ffff8801c6e5f1b0
RIP: atomic_read arch/x86/include/asm/atomic.h:26 [inline] RSP:
ffff8801c6e5f1b0
RIP: refcount_sub_and_test+0x7d/0x1b0 lib/refcount.c:178 RSP:
ffff8801c6e5f1b0
---[ end trace e441d046c6410d31 ]---
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'wireless-drivers-for-davem-2017-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers

Kalle Valo says:

====================
wireless-drivers fixes for 4.13

This time quite a few fixes for iwlwifi and one major regression fix
for brcmfmac. For the iwlwifi aggregation bug a small change was
needed for mac80211, but as Johannes is still away the mac80211 patch
is taken via wireless-drivers tree.

brcmfmac

* fix firmware crash (a recent regression in bcm4343{0,1,8}

iwlwifi

* Some simple PCI HW ID fix-ups and additions for family 9000

* Remove a bogus warning message with new FWs (bug #196915)

* Don't allow illegal channel options to be used (bug #195299)

* A fix for checksum offload in family 9000

* A fix serious throughput degradation in 11ac with multiple streams

* An old bug in SMPS where the firmware was not aware of SMPS changes

* Fix a memory leak in the SAR code

* Fix a stuck queue case in AP mode;

* Convert a WARN to a simple debug in a legitimate race case (from
  which we can recover)

* Fix a severe throughput aggregation on 9000-family devices due to
  aggregation issues, needed a small change in mac80211
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Filtering the ACK packet was not put at the right place.

At this place, we already allocated a child and put it
into accept queue.

We absolutely need to call tcp_child_process() to release
its spinlock, or we will deadlock at accept() or close() time.

Found by syzkaller team (Thanks a lot !)

Fixes: 8fac365f ("tcp: Add a tcp_filter hook before handle ack packet")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Chenbo Feng <fengc@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

syzkaller reported that DCCP could have a non empty
write queue at dismantle time.

WARNING: CPU: 1 PID: 2953 at net/core/stream.c:199 sk_stream_kill_queues+0x3ce/0x520 net/core/stream.c:199
Kernel panic - not syncing: panic_on_warn set ...

CPU: 1 PID: 2953 Comm: syz-executor0 Not tainted 4.13.0-rc4+ #2
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:16 [inline]
 dump_stack+0x194/0x257 lib/dump_stack.c:52
 panic+0x1e4/0x417 kernel/panic.c:180
 __warn+0x1c4/0x1d9 kernel/panic.c:541
 report_bug+0x211/0x2d0 lib/bug.c:183
 fixup_bug+0x40/0x90 arch/x86/kernel/traps.c:190
 do_trap_no_signal arch/x86/kernel/traps.c:224 [inline]
 do_trap+0x260/0x390 arch/x86/kernel/traps.c:273
 do_error_trap+0x120/0x390 arch/x86/kernel/traps.c:310
 do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:323
 invalid_op+0x1e/0x30 arch/x86/entry/entry_64.S:846
RIP: 0010:sk_stream_kill_queues+0x3ce/0x520 net/core/stream.c:199
RSP: 0018:ffff8801d182f108 EFLAGS: 00010297
RAX: ffff8801d1144140 RBX: ffff8801d13cb280 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff85137b00 RDI: ffff8801d13cb280
RBP: ffff8801d182f148 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801d13cb4d0
R13: ffff8801d13cb3b8 R14: ffff8801d13cb300 R15: ffff8801d13cb3b8
 inet_csk_destroy_sock+0x175/0x3f0 net/ipv4/inet_connection_sock.c:835
 dccp_close+0x84d/0xc10 net/dccp/proto.c:1067
 inet_release+0xed/0x1c0 net/ipv4/af_inet.c:425
 sock_release+0x8d/0x1e0 net/socket.c:597
 sock_close+0x16/0x20 net/socket.c:1126
 __fput+0x327/0x7e0 fs/file_table.c:210
 ____fput+0x15/0x20 fs/file_table.c:246
 task_work_run+0x18a/0x260 kernel/task_work.c:116
 exit_task_work include/linux/task_work.h:21 [inline]
 do_exit+0xa32/0x1b10 kernel/exit.c:865
 do_group_exit+0x149/0x400 kernel/exit.c:969
 get_signal+0x7e8/0x17e0 kernel/signal.c:2330
 do_signal+0x94/0x1ee0 arch/x86/kernel/signal.c:808
 exit_to_usermode_loop+0x21c/0x2d0 arch/x86/entry/common.c:157
 prepare_exit_to_usermode arch/x86/entry/common.c:194 [inline]
 syscall_return_slowpath+0x3a7/0x450 arch/x86/entry/common.c:263
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

copy_linear_skb() is broken; both of its callers actually
expect 'len' to be the amount we are trying to copy,
not the offset of the end.
Fix it keeping the meanings of arguments in sync with what the
callers (both of them) expect.
Also restore a saner behavior on EFAULT (i.e. preserving
the iov_iter position in case of failure):

The commit fd851ba9 ("udp: harden copy_linear_skb()")
avoids the more destructive effect of the buggy
copy_linear_skb(), e.g. no more invalid memory access, but
said function still behaves incorrectly: when peeking with
offset it can fail with EINVAL instead of copying the
appropriate amount of memory.
Reported-by: Sasha Levin <alexander.levin@verizon.com>
Fixes: b65ac446 ("udp: try to avoid 2 cache miss on dequeue")
Fixes: fd851ba9 ("udp: harden copy_linear_skb()")
Signed-off-by: Al Viro <viro@ZenIV.linux.org.uk>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Tested-by: Sasha Levin <alexander.levin@verizon.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When a dst is created by addrconf_dst_alloc() for a host route or an
anycast route, dst->dev points to loopback dev while rt6->rt6i_idev
points to a real device.
When the real device goes down, the current cleanup code only checks for
dst->dev and assumes rt6->rt6i_idev->dev is the same. This causes the
refcount leak on the real device in the above situation.
This patch makes sure to always release the refcount taken on
rt6->rt6i_idev during dst_dev_put().

Fixes: 587fea74 ("ipv6: mark DST_NOGC and remove the operation of
dst_free()")
Reported-by: John Stultz <john.stultz@linaro.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Tested-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

pfkey_broadcast() might be called from non process contexts,
we can not use GFP_KERNEL in these cases [1].

This patch partially reverts commit ba51b6be ("net: Fix RCU splat in
af_key"), only keeping the GFP_ATOMIC forcing under rcu_read_lock()
section.

[1] : syzkaller reported :

in_atomic(): 1, irqs_disabled(): 0, pid: 2932, name: syzkaller183439
3 locks held by syzkaller183439/2932:
 #0:  (&net->xfrm.xfrm_cfg_mutex){+.+.+.}, at: [<ffffffff83b43888>] pfkey_sendmsg+0x4c8/0x9f0 net/key/af_key.c:3649
 #1:  (&pfk->dump_lock){+.+.+.}, at: [<ffffffff83b467f6>] pfkey_do_dump+0x76/0x3f0 net/key/af_key.c:293
 #2:  (&(&net->xfrm.xfrm_policy_lock)->rlock){+...+.}, at: [<ffffffff83957632>] spin_lock_bh include/linux/spinlock.h:304 [inline]
 #2:  (&(&net->xfrm.xfrm_policy_lock)->rlock){+...+.}, at: [<ffffffff83957632>] xfrm_policy_walk+0x192/0xa30 net/xfrm/xfrm_policy.c:1028
CPU: 0 PID: 2932 Comm: syzkaller183439 Not tainted 4.13.0-rc4+ #24
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:16 [inline]
 dump_stack+0x194/0x257 lib/dump_stack.c:52
 ___might_sleep+0x2b2/0x470 kernel/sched/core.c:5994
 __might_sleep+0x95/0x190 kernel/sched/core.c:5947
 slab_pre_alloc_hook mm/slab.h:416 [inline]
 slab_alloc mm/slab.c:3383 [inline]
 kmem_cache_alloc+0x24b/0x6e0 mm/slab.c:3559
 skb_clone+0x1a0/0x400 net/core/skbuff.c:1037
 pfkey_broadcast_one+0x4b2/0x6f0 net/key/af_key.c:207
 pfkey_broadcast+0x4ba/0x770 net/key/af_key.c:281
 dump_sp+0x3d6/0x500 net/key/af_key.c:2685
 xfrm_policy_walk+0x2f1/0xa30 net/xfrm/xfrm_policy.c:1042
 pfkey_dump_sp+0x42/0x50 net/key/af_key.c:2695
 pfkey_do_dump+0xaa/0x3f0 net/key/af_key.c:299
 pfkey_spddump+0x1a0/0x210 net/key/af_key.c:2722
 pfkey_process+0x606/0x710 net/key/af_key.c:2814
 pfkey_sendmsg+0x4d6/0x9f0 net/key/af_key.c:3650
sock_sendmsg_nosec net/socket.c:633 [inline]
 sock_sendmsg+0xca/0x110 net/socket.c:643
 ___sys_sendmsg+0x755/0x890 net/socket.c:2035
 __sys_sendmsg+0xe5/0x210 net/socket.c:2069
 SYSC_sendmsg net/socket.c:2080 [inline]
 SyS_sendmsg+0x2d/0x50 net/socket.c:2076
 entry_SYSCALL_64_fastpath+0x1f/0xbe
RIP: 0033:0x445d79
RSP: 002b:00007f32447c1dc8 EFLAGS: 00000202 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000445d79
RDX: 0000000000000000 RSI: 000000002023dfc8 RDI: 0000000000000008
RBP: 0000000000000086 R08: 00007f32447c2700 R09: 00007f32447c2700
R10: 00007f32447c2700 R11: 0000000000000202 R12: 0000000000000000
R13: 00007ffe33edec4f R14: 00007f32447c29c0 R15: 0000000000000000

Fixes: ba51b6be ("net: Fix RCU splat in af_key")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: David Ahern <dsa@cumulusnetworks.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

__tcp_ulp_find_autoload returns tcp_ulp_ops after taking a reference on
the module. Then, if ->init fails, tcp_set_ulp propagates the error but
nothing releases that reference.

Fixes: 734942cc ("tcp: ULP infrastructure")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ding Tianhong says:

====================
Add new PCI_DEV_FLAGS_NO_RELAXED_ORDERING flag

Some devices have problems with Transaction Layer Packets with the Relaxed
Ordering Attribute set.  This patch set adds a new PCIe Device Flag,
PCI_DEV_FLAGS_NO_RELAXED_ORDERING, a set of PCI Quirks to catch some known
devices with Relaxed Ordering issues, and a use of this new flag by the
cxgb4 driver to avoid using Relaxed Ordering with problematic Root Complex
Ports.

It's been years since I've submitted kernel.org patches, I appolgise for the
almost certain submission errors.

v2: Alexander point out that the v1 was only a part of the whole solution,
    some platform which has some issues could use the new flag to indicate
    that it is not safe to enable relaxed ordering attribute, then we need
    to clear the relaxed ordering enable bits in the PCI configuration when
    initializing the device. So add a new second patch to modify the PCI
    initialization code to clear the relaxed ordering enable bit in the
    event that the root complex doesn't want relaxed ordering enabled.

    The third patch was base on the v1's second patch and only be changed
    to query the relaxed ordering enable bit in the PCI configuration space
    to allow the Chelsio NIC to send TLPs with the relaxed ordering attributes
    set.

    This version didn't plan to drop the defines for Intel Drivers to use the
    new checking way to enable relaxed ordering because it is not the hardest
    part of the moment, we could fix it in next patchset when this patches
    reach the goal.

v3: Redesigned the logic for pci_configure_relaxed_ordering when configuration,
    If a PCIe device didn't enable the relaxed ordering attribute default,
    we should not do anything in the PCIe configuration, otherwise we
    should check if any of the devices above us do not support relaxed
    ordering by the PCI_DEV_FLAGS_NO_RELAXED_ORDERING flag, then base on
    the result if we get a return that indicate that the relaxed ordering
    is not supported we should update our device to disable relaxed ordering
    in configuration space. If the device above us doesn't exist or isn't
    the PCIe device, we shouldn't do anything and skip updating relaxed ordering
    because we are probably running in a guest.

v4: Rename the functions pcie_get_relaxed_ordering and pcie_disable_relaxed_ordering
    according John's suggestion, and modify the description, use the true/false
    as the return value.

    We shouldn't enable relaxed ordering attribute by the setting in the root
    complex configuration space for PCIe device, so fix it for cxgb4.

    Fix some format issues.

v5: Removed the unnecessary code for some function which only return the bool
    value, and add the check for VF device.

    Make this patch set base on 4.12-rc5.

v6: Fix the logic error in the need to enable the relaxed ordering attribute for cxgb4.

v7: The cxgb4 drivers will enable the PCIe Capability Device Control[Relaxed
    Ordering Enable] in PCI Probe() routine, this will break our current
    solution for some platform which has problematic when enable the relaxed
    ordering attribute. According to the latest recommendations, remove the
    enable_pcie_relaxed_ordering(), although it could not cover the Peer-to-Peer
    scene, but we agree to leave this problem until we really trigger it.

    Make this patch set base on 4.12 release version.

v8: Change the second patch title and description to make it more reasonable,
    add the acked-by from Alex and Ashok.

    Add a new patch to enable the Relaxed Ordering Attribute for cxgb4vf driver.

    Make this patch set base on 4.13-rc2.

v9: The document (https://software.intel.com/sites/default/files/managed/9e/
    bc/64-ia-32-architectures-optimization-manual.pdf) indicate that the Xeon
    processors based on Broadwell/Haswell microarchitecture has the problem
    with Relaxed Ordering Attribute enabled, so add the whole list Device ID
    from Intel to the patch.

v10: Significant rework based on Bjorn's feedback, reorganize the first 2 patches,
     now the Intel and AMD erratum soc has been divided to the different patches,
     rename the pcie_relaxed_ordering_supported() to pcie_relaxed_ordering_enabled(),
     and no need to check every intervening switch except the root ports, update
     some commits.

v11: We shouldn't let the Intel engineer to acked the AMD's erratum patch, fix the
     funny mistake.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

cxgb4vf Ethernet driver now queries PCIe configuration space to
determine if it can send TLPs to it with the Relaxed Ordering
Attribute set, just like the pf did.
Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Reviewed-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

cxgb4 Ethernet driver now queries PCIe configuration space to determine
if it can send TLPs to it with the Relaxed Ordering Attribute set.

Remove the enable_pcie_relaxed_ordering() to avoid enable PCIe Capability
Device Control[Relaxed Ordering Enable] at probe routine, to make sure
the driver will not send the Relaxed Ordering TLPs to the Root Complex which
could not deal the Relaxed Ordering TLPs.
Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Reviewed-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Casey reported that the AMD ARM A1100 SoC has a bug in its PCIe
Root Port where Upstream Transaction Layer Packets with the Relaxed
Ordering Attribute clear are allowed to bypass earlier TLPs with
Relaxed Ordering set, it would cause Data Corruption, so we need
to disable Relaxed Ordering Attribute when Upstream TLPs to the
Root Port.
Reported-and-suggested-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Acked-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

According to the Intel spec section 3.9.1 said:

    3.9.1 Optimizing PCIe Performance for Accesses Toward Coherent Memory
          and Toward MMIO Regions (P2P)

    In order to maximize performance for PCIe devices in the processors
    listed in Table 3-6 below, the soft- ware should determine whether the
    accesses are toward coherent memory (system memory) or toward MMIO
    regions (P2P access to other devices). If the access is toward MMIO
    region, then software can command HW to set the RO bit in the TLP
    header, as this would allow hardware to achieve maximum throughput for
    these types of accesses. For accesses toward coherent memory, software
    can command HW to clear the RO bit in the TLP header (no RO), as this
    would allow hardware to achieve maximum throughput for these types of
    accesses.

    Table 3-6. Intel Processor CPU RP Device IDs for Processors Optimizing
               PCIe Performance

    Processor                            CPU RP Device IDs

    Intel Xeon processors based on       6F01H-6F0EH
    Broadwell microarchitecture

    Intel Xeon processors based on       2F01H-2F0EH
    Haswell microarchitecture

It means some Intel processors has performance issue when use the Relaxed
Ordering Attribute, so disable Relaxed Ordering for these root port.
Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>
Acked-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When bit4 is set in the PCIe Device Control register, it indicates
whether the device is permitted to use relaxed ordering.
On some platforms using relaxed ordering can have performance issues or
due to erratum can cause data-corruption. In such cases devices must avoid
using relaxed ordering.

The patch adds a new flag PCI_DEV_FLAGS_NO_RELAXED_ORDERING to indicate that
Relaxed Ordering (RO) attribute should not be used for Transaction Layer
Packets (TLP) targeted towards these affected root complexes.

This patch checks if there is any node in the hierarchy that indicates that
using relaxed ordering is not safe. In such cases the patch turns off the
relaxed ordering by clearing the capability for this device.
Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Acked-by: Ashok Raj <ashok.raj@intel.com>
Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>
Acked-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the function msg_reverse(), we reverse the header while trying to
reuse the original buffer whenever possible. Those rejected/returned
messages are always transmitted as unicast, but the msg_non_seq field
is not explicitly set to zero as it should be.

We have seen cases where multicast senders set the message type to
"NOT dest_droppable", meaning that a multicast message shorter than
one MTU will be returned, e.g., during receive buffer overflow, by
reusing the original buffer. This has the effect that even the
'msg_non_seq' field is inadvertently inherited by the rejected message,
although it is now sent as a unicast message. This again leads the
receiving unicast link endpoint to steer the packet toward the broadcast
link receive function, where it is dropped. The affected unicast link is
thereafter (after 100 failed retransmissions) declared 'stale' and
reset.

We fix this by unconditionally setting the 'msg_non_seq' flag to zero
for all rejected/returned messages.
Reported-by: Canh Duc Luu <canh.d.luu@dektech.com.au>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

On L2 bearers, the TIPC broadcast function is sending out packets using
the corresponding L2 broadcast address. At reception, we filter such
packets under the assumption that they will also be delivered as
broadcast packets.

This assumption doesn't always hold true. Under high load, we have seen
that a switch may convert the destination address and deliver the packet
as a PACKET_MULTICAST, something leading to inadvertently dropped
packets and a stale and reset broadcast link.

We fix this by extending the reception filtering to accept packets of
type PACKET_MULTICAST.
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

"ip route get $daddr iif eth0 from $saddr" causes:
 BUG: KASAN: use-after-free in ip_route_input_rcu+0x1535/0x1b50
 Call Trace:
  ip_route_input_rcu+0x1535/0x1b50
  ip_route_input_noref+0xf9/0x190
  tcp_v4_early_demux+0x1a4/0x2b0
  ip_rcv+0xbcb/0xc05
  __netif_receive_skb+0x9c/0xd0
  netif_receive_skb_internal+0x5a8/0x890

Problem is that inet_rtm_getroute calls either ip_route_input_rcu (if an
iif was provided) or ip_route_output_key_hash_rcu.

But ip_route_input_rcu, unlike ip_route_output_key_hash_rcu, already
associates the dst_entry with the skb.  This clears the SKB_DST_NOREF
bit (i.e. skb_dst_drop will release/free the entry while it should not).

Thus only set the dst if we called ip_route_output_key_hash_rcu().

I tested this patch by running:
 while true;do ip r get 10.0.1.2;done > /dev/null &
 while true;do ip r get 10.0.1.2 iif eth0  from 10.0.1.1;done > /dev/null &
... and saw no crash or memory leak.

Cc: Roopa Prabhu <roopa@cumulusnetworks.com>
Cc: David Ahern <dsahern@gmail.com>
Fixes: ba52d61e ("ipv4: route: restore skb_dst_set in inet_rtm_getroute")
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The firmware feature check introduced for multi-scheduled scan turned out
to be failing for bcm4343{0,1,8} devices resulting in a firmware crash.
The reason for this crash has not yet been root cause so this patch avoids
the feature check for those device as a short-term fix.
Reported-by: Stefan Wahren <stefan.wahren@i2se.com>
Reported-by: Ian Molton <ian@mnementh.co.uk>
Fixes: 9fe929aa ("brcmfmac: add firmware feature detection for gscan feature")
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

bond_miimon_commit() handles the UP transition for each slave of a bond
in the case of MII. It is triggered 10 times per second for the default
MII Polling interval of 100ms. For device drivers that do not implement
__ethtool_get_link_ksettings() the call to bond_update_speed_duplex()
fails persistently while the MII status could remain UP. That is, in
this and other cases where the speed/duplex update keeps failing over a
longer period of time while the MII state is UP, a warning is printed
every MII polling interval.

To address these excessive warnings net_ratelimit() should be used.
Printing a warning once would not be sufficient since the call to
bond_update_speed_duplex() could recover to succeed and fail again
later. In that case there would be no new indication what went wrong.

Fixes: b5bf0f5b (bonding: correctly update link status during mii-commit phase)
Signed-off-by: Andreas Born <futur.andy@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

syzkaller got crashes with CONFIG_HARDENED_USERCOPY=y configs.

Issue here is that recvfrom() can be used with user buffer of Z bytes,
and SO_PEEK_OFF of X bytes, from a skb with Y bytes, and following
condition :

Z < X < Y

kernel BUG at mm/usercopy.c:72!
invalid opcode: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
   (ftrace buffer empty)
Modules linked in:
CPU: 0 PID: 2917 Comm: syzkaller842281 Not tainted 4.13.0-rc3+ #16
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
task: ffff8801d2fa40c0 task.stack: ffff8801d1fe8000
RIP: 0010:report_usercopy mm/usercopy.c:64 [inline]
RIP: 0010:__check_object_size+0x3ad/0x500 mm/usercopy.c:264
RSP: 0018:ffff8801d1fef8a8 EFLAGS: 00010286
RAX: 0000000000000078 RBX: ffffffff847102c0 RCX: 0000000000000000
RDX: 0000000000000078 RSI: 1ffff1003a3fded5 RDI: ffffed003a3fdf09
RBP: ffff8801d1fef998 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801d1ea480e
R13: fffffffffffffffa R14: ffffffff84710280 R15: dffffc0000000000
FS:  0000000001360880(0000) GS:ffff8801dc000000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000202ecfe4 CR3: 00000001d1ff8000 CR4: 00000000001406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 check_object_size include/linux/thread_info.h:108 [inline]
 check_copy_size include/linux/thread_info.h:139 [inline]
 copy_to_iter include/linux/uio.h:105 [inline]
 copy_linear_skb include/net/udp.h:371 [inline]
 udpv6_recvmsg+0x1040/0x1af0 net/ipv6/udp.c:395
 inet_recvmsg+0x14c/0x5f0 net/ipv4/af_inet.c:793
 sock_recvmsg_nosec net/socket.c:792 [inline]
 sock_recvmsg+0xc9/0x110 net/socket.c:799
 SYSC_recvfrom+0x2d6/0x570 net/socket.c:1788
 SyS_recvfrom+0x40/0x50 net/socket.c:1760
 entry_SYSCALL_64_fastpath+0x1f/0xbe

Fixes: b65ac446 ("udp: try to avoid 2 cache miss on dequeue")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
bpf: Minor fix in bpf_convert_ctx_access

First one was found while trying to compile the kernel
with !CONFIG_NET_RX_BUSY_POLL.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When CONFIG_NET_SCHED or CONFIG_NET_RX_BUSY_POLL is /not/ set and
we try a narrow __sk_buff load of tc_index or napi_id, respectively,
then verifier rightfully complains that it's misconfigured, because
we need to set target_size in each of the two cases. The rewrite
for the ctx access is just a dummy op, but needs to pass, so fix
this up.

Fixes: f96da094 ("bpf: simplify narrower ctx access")
Reported-by: Shubham Bansal <illusionist.neo@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

MIN_NAPI_ID is used in various places outside of
CONFIG_NET_RX_BUSY_POLL wrapping, so when it's not set
we run into build errors such as:

  net/core/dev.c: In function 'dev_get_by_napi_id':
  net/core/dev.c:886:16: error: ‘MIN_NAPI_ID’ undeclared (first use in this function)
    if (napi_id < MIN_NAPI_ID)
                  ^~~~~~~~~~~

Thus, have MIN_NAPI_ID always defined to fix these errors.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

If mISDN_FsmNew() fails to allocate memory for jumpmatrix
then null pointer dereference will occur on any write to
jumpmatrix.

The patch adds check on successful allocation and
corresponding error handling.

Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

The Flower app may receive a request to update the MTU of a representor
netdev upon receipt of a control message from the firmware. This requires
the RTNL lock which needs to be taken outside of the packet processing
path.

As a handling of this correctly seems a little to invasive for a fix simply
skip setting the MTU for now.

Relevant backtrace:
 [ 1496.288489] BUG: scheduling while atomic: kworker/0:3/373/0x00000100
 [ 1496.294911]  dca syscopyarea sysfillrect sysimgblt fb_sys_fops ptp drm mxm_wmi ahci pps_core libahci i2c_algo_bit wmi [last unloaded: nfp]
 [ 1496.294918] CPU: 0 PID: 373 Comm: kworker/0:3 Tainted: G           OE   4.13.0-rc3+ #3
 [ 1496.294919] Hardware name: Supermicro X10DRi/X10DRi, BIOS 2.0 12/28/2015
 [ 1496.294923] Workqueue: events work_for_cpu_fn
 [ 1496.294924] Call Trace:
 [ 1496.294927]  <IRQ>
 [ 1496.294931]  dump_stack+0x63/0x82
 [ 1496.294935]  __schedule_bug+0x54/0x70
 [ 1496.294937]  __schedule+0x62f/0x890
 [ 1496.294941]  ? intel_unmap_sg+0x90/0x90
 [ 1496.294942]  schedule+0x36/0x80
 [ 1496.294943]  schedule_preempt_disabled+0xe/0x10
 [ 1496.294945]  __mutex_lock.isra.2+0x445/0x4a0
 [ 1496.294947]  ? device_is_rmrr_locked+0x12/0x50
 [ 1496.294950]  ? kfree+0x162/0x170
 [ 1496.294952]  ? device_is_rmrr_locked+0x12/0x50
 [ 1496.294953]  ? iommu_should_identity_map+0x50/0xe0
 [ 1496.294954]  __mutex_lock_slowpath+0x13/0x20
 [ 1496.294955]  ? iommu_no_mapping+0x48/0xd0
 [ 1496.294956]  ? __mutex_lock_slowpath+0x13/0x20
 [ 1496.294957]  mutex_lock+0x2f/0x40
 [ 1496.294960]  rtnl_lock+0x15/0x20
 [ 1496.294979]  nfp_flower_cmsg_rx+0xc8/0x150 [nfp]
 [ 1496.294986]  nfp_ctrl_poll+0x286/0x350 [nfp]
 [ 1496.294989]  tasklet_action+0xf6/0x110
 [ 1496.294992]  __do_softirq+0xed/0x278
 [ 1496.294993]  irq_exit+0xb6/0xc0
 [ 1496.294994]  do_IRQ+0x4f/0xd0
 [ 1496.294996]  common_interrupt+0x89/0x89

Fixes: 948faa46 ("nfp: add support for control messages for flower app")
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, the function stmmac_mdio_register() is only used by
stmmac_dvr_probe() from stmmac_main.c, in order to register the MDIO bus
and probe information about the PHY. As this function is called before
calling register_netdev(), all messages logged from stmmac_mdio_register
are prefixed by "(unnamed net_device)". The goal of netdev_info or
netdev_err is to dump useful infos about a net_device, when this data
structure is partially initialized, there is no point for using these
functions.

This commit fixes the issue by replacing all netdev_*() by the
corresponding dev_*() function for logging. The last netdev_info is
replaced by phy_attached_info(), as a valid phydev can be used at this
point.
Signed-off-by: Romain Perier <romain.perier@collabora.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Without this filters cannot be attached.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Fixes: 6529eaba ("net: sched: introduce tcf block infractructure")
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The patch c4adfc82 ("bonding: make speed, duplex setting consistent
with link state") puts the link state to down if
bond_update_speed_duplex() cannot retrieve speed and duplex settings.
Assumably the patch was written with 802.3ad mode in mind which relies
on link speed/duplex settings. For other modes like active-backup these
settings are not required. Thus, only for these other modes, this patch
reintroduces support for slaves that do not support reporting speed or
duplex such as wireless devices. This fixes the regression reported in
bug 196547 (https://bugzilla.kernel.org/show_bug.cgi?id=196547).

Fixes: c4adfc82 ("bonding: make speed, duplex setting consistent
with link state")
Signed-off-by: Andreas Born <futur.andy@googlemail.com>
Acked-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The DSA layer frees the original skb when an xmit function returns NULL,
meaning an error occurred. But if the tagging code copied the original
skb, it is responsible of freeing the copy if an error occurs.

The ksz tagging code currently has two issues: if skb_put_padto fails,
the skb copy is not freed, and the original skb will be freed twice.

To fix that, move skb_put_padto inside both branches of the skb_tailroom
condition, before freeing the original skb, and free the copy on error.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Woojung Huh <woojung.huh@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from David Miller:

 1) Fix handling of initial STATE message in TIPC, from Jon Paul Maloy.

 2) Fix stats handling in bcm_sysport_get_stats(), from Florian
    Fainelli.

 3) Reject 16777215 VNI value in geneve_validate(), from Girish
    Moodalbail.

 4) Fix initial IGMP sysctl setting regression, from Nikolay Borisov.

 5) Once a UFO fragmented frame is treated as UFO, we should continue
    doing so. Likewise once a frame has been segmented, we should
    continue doing that and not try to convert it to a UFO frame. From
    Willem de Bruijn.

 6) Test the AF_PACKET RX/TX ring pg_vec state under the socket lock to
    prevent races. From Willem de Bruijn.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  packet: fix tp_reserve race in packet_set_ring
  udp: consistently apply ufo or fragmentation
  net: sched: set xt_tgchk_param par.nft_compat as 0 in ipt_init_target
  igmp: Fix regression caused by igmp sysctl namespace code.
  geneve: maximum value of VNI cannot be used
  net: systemport: Fix software statistics for SYSTEMPORT Lite
  tipc: remove premature ESTABLISH FSM event at link synchronization

Updates to tp_reserve can race with reads of the field in
packet_set_ring. Avoid this by holding the socket lock during
updates in setsockopt PACKET_RESERVE.

This bug was discovered by syzkaller.

Fixes: 8913336a ("packet: add PACKET_RESERVE sockopt")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When iteratively building a UDP datagram with MSG_MORE and that
datagram exceeds MTU, consistently choose UFO or fragmentation.

Once skb_is_gso, always apply ufo. Conversely, once a datagram is
split across multiple skbs, do not consider ufo.

Sendpage already maintains the first invariant, only add the second.
IPv6 does not have a sendpage implementation to modify.

A gso skb must have a partial checksum, do not follow sk_no_check_tx
in udp_send_skb.

Found by syzkaller.

Fixes: e89e9cf5 ("[IPv4/IPv6]: UFO Scatter-gather approach")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull sparc updates from David Miller:

 1) Recognize M8 cpus, just basic chip ID matching, from Allen Pais.

 2) Prevent crashes when bringing up sunvdc virtual block devices in
    some environments. From Jim Quigley.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sunvdc: prevent sunvdc panic when mpgroup disk added to guest domain
  sparc64: Increase max_phys_bits to 51 and VA bits to 53 for M8.
  sparc64: recognize and support sparc M8 cpu type
  sparc64: properly name the cpu constants

Commit 55917a21 ("netfilter: x_tables: add context to know if
extension runs from nft_compat") introduced a member nft_compat to
xt_tgchk_param structure.

But it didn't set it's value for ipt_init_target. With unexpected
value in par.nft_compat, it may return unexpected result in some
target's checkentry.

This patch is to set all it's fields as 0 and only initialize the
non-zero fields in ipt_init_target.

v1->v2:
  As Wang Cong's suggestion, fix it by setting all it's fields as
  0 and only initializing the non-zero fields.

Fixes: 55917a21 ("netfilter: x_tables: add context to know if extension runs from nft_compat")
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit dcd87999 ("igmp: net: Move igmp namespace init to correct file")
moved the igmp sysctls initialization from tcp_sk_init to igmp_net_init. This
function is only called as part of per-namespace initialization, only if
CONFIG_IP_MULTICAST is defined, otherwise igmp_mc_init() call in ip_init is
compiled out, casuing the igmp pernet ops to not be registerd and those sysctl
being left initialized with 0. However, there are certain functions, such as
ip_mc_join_group which are always compiled and make use of some of those
sysctls. Let's do a partial revert of the aforementioned commit and move the
sysctl initialization into inet_init_net, that way they will always have
sane values.

Fixes: dcd87999 ("igmp: net: Move igmp namespace init to correct file")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=196595Reported-by: Gerardo Exequiel Pozzi <vmlinuz386@gmail.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Geneve's Virtual Network Identifier (VNI) is 24 bit long, so the range
of values for it would be from 0 to 16777215 (2^24 -1).  However, one
cannot create a geneve device with VNI set to 16777215. This patch fixes
this issue.
Signed-off-by: Girish Moodalbail <girish.moodalbail@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

With SYSTEMPORT Lite we have holes in our statistics layout that make us
skip over the hardware MIB counters, bcm_sysport_get_stats() was not
taking that into account resulting in reporting 0 for all SW-maintained
statistics, fix this by skipping accordingly.

Fixes: 44a4524c ("net: systemport: Add support for SYSTEMPORT Lite")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When a link between two nodes come up, both endpoints will initially
send out a STATE message to the peer, to increase the probability that
the peer endpoint also is up when the first traffic message arrives.
Thereafter, if the establishing link is the second link between two
nodes, this first "traffic" message is a TUNNEL_PROTOCOL/SYNCH message,
helping the peer to perform initial synchronization between the two
links.

However, the initial STATE message may be lost, in which case the SYNCH
message will be the first one arriving at the peer. This should also
work, as the SYNCH message itself will be used to take up the link
endpoint before  initializing synchronization.

Unfortunately the code for this case is broken. Currently, the link is
brought up through a tipc_link_fsm_evt(ESTABLISHED) when a SYNCH
arrives, whereupon __tipc_node_link_up() is called to distribute the
link slots and take the link into traffic. But, __tipc_node_link_up() is
itself starting with a test for whether the link is up, and if true,
returns without action. Clearly, the tipc_link_fsm_evt(ESTABLISHED) call
is unnecessary, since tipc_node_link_up() is itself issuing such an
event, but also harmful, since it inhibits tipc_node_link_up() to
perform the test of its tasks, and the link endpoint in question hence
is never taken into traffic.

This problem has been exposed when we set up dual links between pre-
and post-4.4 kernels, because the former ones don't send out the
initial STATE message described above.

We fix this by removing the unnecessary event call.
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>