- 24 Aug, 2021 3 commits
-
-
Takashi Iwai authored
-
Johnathon Clark authored
This patch extends support for the HP Spectre x360 14 amp enable quirk to support a model of the device with an additional subdevice ID. Signed-off-by:
Johnathon Clark <john.clark@cantab.net> Link: https://lore.kernel.org/r/20210823162110.8870-1-john.clark@cantab.net Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
We've got a regression report for USB-audio with Sony WALKMAN NW-A45 DAC device where no sound is audible on recent kernel. The bisection resulted in the code change wrt endpoint management, and the further debug session revealed that it was caused by the order of the USB audio interface. In the earlier code, we always set up the USB interface at first before other setups, but it was changed to be done at the last for UAC2/3, which is more standard way, while keeping the old way for UAC1. OTOH, this device seems requiring the setup of the interface at first just like UAC1. This patch works around the regression by applying the interface setup specifically for the WALKMAN at the beginning of the endpoint setup procedure. This change is written straightforwardly to be easily backported in old kernels. A further cleanup to move the workaround into a generic quirk section will follow in a later patch. Fixes: bf6313a0 ("ALSA: usb-audio: Refactor endpoint management") Cc: <stable@vger.kernel.org> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214105 Link: https://lore.kernel.org/r/20210824054700.8236-1-tiwai@suse.deSigned-off-by:
-
- 23 Aug, 2021 8 commits
-
-
Takashi Iwai authored
We worked around the breakage of PCM buffer setup by the commit 65ca89c2 ("ASoC: intel: atom: Fix breakage for PCM buffer address setup"), but this isn't necessary since the CONTINUOUS buffer type also sets runtime->dma_addr since commit f84ba106 ("ALSA: memalloc: Store snd_dma_buffer.addr for continuous pages, too"). Let's revert the change again. Link: https://lore.kernel.org/r/20210822072127.9786-1-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
-
Takashi Iwai authored
Fix a trivial warning for the indentation by putting an empty line: Documentation/sound/alsa-configuration.rst:2258: WARNING: Unexpected indentation. Fixes: a39978ed ("ALSA: doc: Add the description of quirk_flags option for snd-usb-audio") Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Link: https://lore.kernel.org/r/20210823113518.30134-1-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
The previous patch allowed user to specify the aliasing of SSID via model option for applying a quirk. Update the documentation accordingly. Link: https://lore.kernel.org/r/20210823073722.14873-4-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
There are tons of quirks for HD-audio and many of them are without model string, hence it's not trivial to apply the same quirk for a new device. This patch makes it easier: namely, the model string accepts a form as "XXXX:YYYY" (a pair of hex numbers of the subsystem-vendor and subsystem-device IDs), to specify the alias of PCI (or codec) SSID. e.g. passing model=1234:abcd would apply the quirk that matches with the given SSID 1234:abcd instead of the actual SSID. Link: https://lore.kernel.org/r/20210823073722.14873-3-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
This contains a slight code refactoring of snd_hda_pick_fixup(): - Unify the ID setup - Unify the debug print message - Use snd_pci_quirk_lookup_id() for the codec SSID matching Mostly for simplifying the code flow but also it makes easier to add the codec alias handling in the upcoming patch. Link: https://lore.kernel.org/r/20210823073722.14873-2-tiwai@suse.deSigned-off-by:
-
Takashi Sakamoto authored
Mark of the Unicorn (MOTU) shipped 896HD 2003 as one of models in second generation of its FireWire series, and already discontinued it. The model consists of below ICs: * Texas Instruments TSB41AB2 * Phillips Semiconductors PDI1394L40 * Altera cyclone EP1C3 * Texas Instruments TMS320VC5402 It supports sampling transmission frequency up to 192.0 kHz. The packet format differs depending on both of sampling transfer frequency and enabling ADAT channels. The model doesn't support MIDI message transmission. This commit adds support for it. $ python3 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 04101b66 bus_info_length 4, crc_length 16, crc 7014 404 31333934 bus_name "1394" 408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4) 40c 0001f200 company_id 0001f2 | 410 0001dbce device_id 000001dbce | EUI-64 0001f2000001dbce root directory ----------------------------------------------------------------- 414 0004c65c directory_length 4, crc 50780 418 030001f2 vendor 41c 0c0083c0 node capabilities per IEEE 1394 420 8d000006 --> eui-64 leaf at 438 424 d1000001 --> unit directory at 428 unit directory at 428 ----------------------------------------------------------------- 428 0003dcc1 directory_length 3, crc 56513 42c 120001f2 specifier id 430 13000005 version 434 17102800 model eui-64 leaf at 438 ----------------------------------------------------------------- 438 000264f2 leaf_length 2, crc 25842 43c 0001f200 company_id 0001f2 | 440 0001dbce device_id 000001dbce | EUI-64 0001f2000001dbce Signed-off-by:Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210823085741.33864-1-o-takashi@sakamocchi.jpSigned-off-by:
-
Takashi Iwai authored
ASUS ROG Strix G17 has the very same PCI and codec SSID (1043:103f) as ASUS TX300, and unfortunately, the existing quirk for TX300 is broken on ASUS ROG. Actually the device works without the quirk, so we'll need to clear the quirk before applying for this device. Since ASUS ROG has a different codec (ALC294 - while TX300 has ALC282), this patch adds a workaround for the device, just clearing the codec->fixup_id by checking the codec vendor_id. It's a bit ugly to add such a workaround there, but it seems to be the simplest way. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214101 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210820143214.3654-1-tiwai@suse.deSigned-off-by:
-
- 19 Aug, 2021 2 commits
-
-
Takashi Iwai authored
The commit 2e6b8363 ("ASoC: intel: atom: Fix reference to PCM buffer address") changed the reference of PCM buffer address to substream->runtime->dma_addr as the buffer address may change dynamically. However, I forgot that the dma_addr field is still not set up for the CONTINUOUS buffer type (that this driver uses) yet in 5.14 and earlier kernels, and it resulted in garbage I/O. The problem will be fixed in 5.15, but we need to address it quickly for now. The fix is to deduce the address again from the DMA pointer with virt_to_phys(), but from the right one, substream->runtime->dma_area. Fixes: 2e6b8363 ("ASoC: intel: atom: Fix reference to PCM buffer address") Reported-and-tested-by:
Hans de Goede <hdegoede@redhat.com> Cc: <stable@vger.kernel.org> Acked-by:
Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/2048c6aa-2187-46bd-6772-36a4fb3c5aeb@redhat.com Link: https://lore.kernel.org/r/20210819152945.8510-1-tiwai@suse.deSigned-off-by:
-
Kai-Heng Feng authored
The mic has lots of noises if mic boost is enabled. So disable mic boost to get crystal clear audio capture. Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210818144119.121738-1-kai.heng.feng@canonical.comSigned-off-by:
-
- 18 Aug, 2021 2 commits
-
-
Nathan Chancellor authored
When CONFIG_PM is not set, there is an unused function warning: sound/pci/hda/patch_analog.c:115:13: warning: unused function 'ad198x_shutup' [-Wunused-function] static void ad198x_shutup(struct hda_codec *codec) ^ 1 warning generated. Sink ad198x_shutup() into ad198x_suspend(), as it is only called in that one space. Move the CONFIG_PM guards above ad198x_power_eapd_write() as it is only called in ad198x_power_eapd(), which is in turn only called in ad198x_power_eapd(). Those two functions are large enough that they are left alone. Fixes: 327b34f2 ("ALSA: hda: Nuke unused reboot_notify callback") Signed-off-by:Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20210818012705.311963-2-nathan@kernel.orgSigned-off-by:
-
Nathan Chancellor authored
When CONFIG_PM is not set, there is an unused function warning: sound/pci/hda/patch_sigmatel.c:4383:13: warning: unused function 'stac_shutup' [-Wunused-function] static void stac_shutup(struct hda_codec *codec) ^ 1 warning generated. Sink the contents of stac_shutup() into stac_suspend() since stac_shutup() is only called in that one location now. Fixes: 327b34f2 ("ALSA: hda: Nuke unused reboot_notify callback") Signed-off-by:
-
- 17 Aug, 2021 4 commits
-
-
Takashi Iwai authored
The commit 0165c4e1 ("ALSA: hda: Fix hang during shutdown due to link reset") modified the shutdown callback of the HD-audio controller for working around a hang. Meanwhile, the actual culprit of the hang was identified to be the leftover active codecs that may interfere with the powered down controller somehow, but we took a minimal fix approach for 5.14, and that was the commit above. Now, since the codec drivers go runtime-suspend at shutdown for 5.15, we can revert the change and make sure that the full runtime-suspend is performed at shutdown of HD-audio controller again. This patch essentially reverts the commit above to restore the behavior. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214045 Link: https://lore.kernel.org/r/20210817075630.7115-1-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
-
Takashi Iwai authored
ASUS B23E requires the same workaround like other machines with VT1802, otherwise it looses the codec power on a few nodes and the sound kept silence. Fixes: a0645daf ("ALSA: HDA: Early Forbid of runtime PM") Link: https://lore.kernel.org/r/ac2232f142efcd67fe6ac38897f704f7176bd200.camel@gmail.com Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210817052432.14751-1-tiwai@suse.deSigned-off-by:
-
Imre Deak authored
During system shutdown codecs may be still active, and resetting the controller->codec HW link in this state - based on the bug reporter's tests - leads to the shutdown sequence to get stuck. This happens at least on the reporter's KBL system with an ALC662 codec. For now fix the issue by skipping the link reset step. Fixes: 472e18f6 ("ALSA: hda: Release controller display power during shutdown/reboot") References: https://bugzilla.kernel.org/show_bug.cgi?id=214045 References: https://gitlab.freedesktop.org/drm/intel/-/issues/3618#note_1024665 Reported-and-tested-by: youling257@gmail.com Cc: youling257@gmail.com Signed-off-by:
Imre Deak <imre.deak@intel.com> Link: https://lore.kernel.org/r/20210816174259.2759103-1-imre.deak@intel.comSigned-off-by:
-
- 15 Aug, 2021 1 commit
-
-
Kristin Paget authored
The 2021-model XPS 15 appears to use the same 4-speakers-on-ALC289 audio setup as the Precision models, so requires the same quirk to enable woofer output. Tested on my own 9510. Signed-off-by:
Kristin Paget <kristin@tombom.co.uk> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/e1fc95c5-c10a-1f98-a5c2-dd6e336157e1@tombom.co.ukSigned-off-by:
-
- 14 Aug, 2021 5 commits
-
-
Takashi Iwai authored
As reboot_notify callback is no longer used by the codec core, let's get rid of the unused code. Conexant codec needs a slight code change as it used to call the reboot_notify at the codec removal, too. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214045 Link: https://lore.kernel.org/r/20210813081230.4268-4-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
So far we have a few workarounds at shutdown for each codec, e.g. turning off the display power and setting the codec to D3. But all those are basically a part of the suspend procedure. Moreover, the streams are still active after that call, hence it might hit the update on the codec that has been already put to D3. In this patch, instead of calling each reboot_notify callback, simply put the codec into the runtime-suspended state after the manual suspend of all PCM streams. It makes the code and the behavior more consistent. The reboot_notify callback is no longer used after this patch, and will be cleaned up later. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214045 Link: https://lore.kernel.org/r/20210813081230.4268-3-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Conexant codecs have a workaround for the noise at shutdown to turn off EAPD, but it wasn't applied at suspend. In the later patch, we'll switch from reboot_notify callback to the general suspend-at-shutdown, so let's apply the workaround to the suspend case, too. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214045 Link: https://lore.kernel.org/r/20210813081230.4268-2-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
ALSA PCM core has an optimized way to communicate with user-space for its control and status data via mmap on the supported architectures like x86. Depending on the situation, however, we'd rather want to enforce user-space notifying the applptr or hwptr change explicitly via ioctl. For example, the upcoming non-contig and non-coherent buffer handling would need an explicit sync, and this needs to catch the applptr and hwptr changes. Also, ASoC SOF driver will have the SPIB support that has the similar requirement for the explicit control of the applptr and hwptr. This patch adds the new PCM hardware info flag, SNDRV_PCM_INFO_EXPLICIT_SYNC. When this flag is set, PCM core disables both the control and the status mmap, which enforces user-space to update via SYNC_PTR ioctl. In that way, drivers can catch the applptr and hwptr update and apply the sync operation if needed. Link: https://lore.kernel.org/r/20210812113818.6479-1-tiwai@suse.de Link: https://lore.kernel.org/r/20210610205326.1176400-1-pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20210813082142.5375-1-tiwai@suse.deSigned-off-by:
-
Damien Zammit authored
This adds a second mixer control to Digidesign Mbox to select between Analog/SPDIF capture. Users will note that selecting the SPDIF input source automatically switches the clock mode to sync to SPDIF, which is a feature of the hardware. (You can change the clock source back to internal if you want to capture from spdif but not sync to its clock although this mode is probably not recommended). Unfortunately, starting the stream resets both modes to Internally clocked and Analog input mode. Signed-off-by:
Damien Zammit <damien@zamaudio.com> Tested-by:
-
- 13 Aug, 2021 4 commits
-
-
Takashi Iwai authored
This is an enhancement for the SG-style page handling in vmalloc buffer handler to calculate the continuous pages. When snd_sgbuf_get_chunk_size() is called for a vmalloc buffer, currently we return only the size that fits into a single page. However, this API call is rather supposed for obtaining the continuous pages and most of vmalloc or noncontig buffers do have lots of continuous pages indeed. So, in this patch, the callback now calculates the possibly continuous pages up to the given size limit. Note that the end address in the function is calculated from the last byte, hence it's one byte shorter. This is because ofs + size can be above the actual buffer size boundary. Until now, this feature isn't really used, but it'll become useful in a later patch that adds the non-contiguous buffer type that shares the same callback function as vmalloc. Link: https://lore.kernel.org/r/20210812113818.6479-1-tiwai@suse.de Link: https://lore.kernel.org/r/20210813081645.4680-1-tiwai@suse.deSigned-off-by:
-
Stefan Binding authored
Some of the register values set for type detection cause pops during suspend, ensure these are cleaned up after type detection completes, as well ensuring that these are cleared when we suspend. Signed-off-by:
Stefan Binding <sbinding@opensource.cirrus.com> Signed-off-by:
Vitaly Rodionov <vitalyr@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210812183433.6330-1-vitalyr@opensource.cirrus.comSigned-off-by:
-
Pierre-Louis Bossart authored
Add missing @ Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by:
Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20210812225904.171529-3-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Pierre-Louis Bossart authored
strlcpy is deprecated, use its safe replacement Signed-off-by:
Bard Liao <bard.liao@intel.com> Reviewed-by:
Paul Olaru <paul.olaru@oss.nxp.com> Reviewed-by:
-
- 12 Aug, 2021 11 commits
-
-
Stefan Binding authored
Codec is muted on init, and then unmuted when the stream starts. Signed-off-by:
-
Stefan Binding authored
Signed-off-by:
-
Stefan Binding authored
Since delays when starting jack detection after initialization have been reduced/removed, it is necessary to add back in an extra 20ms delay after the init sequence to allow the CS42L42 to power up correctly. Signed-off-by:
-
Stefan Binding authored
Signed-off-by:
-
Stefan Binding authored
CS42L42 is configured to use a fixed sample rate of 48kHz. Signed-off-by:
-
Stefan Binding authored
Headphones codec will keep reduced maximum volume. Line Out codec will have increased maximum volume. Signed-off-by:
-
Lucas Tanure authored
Dolphin devices have CS8409 HDA Bridge connected to two CS42L42 codecs. Codec 1 supports Headphone and Headset Mic. Codec 2 supports Line Out. Features: - Front and Read Jacks appear as separate jacks; Removal or connection of on jack should not affect the connection of the other. - Front Jack only shows up on jack detection. - Rear Jack is Phantom Jack. - Separate Volume Controls for each Jack Signed-off-by:
Lucas Tanure <tanureal@opensource.cirrus.com> Signed-off-by:
-
Stefan Binding authored
Some hardware configurations do not support jack type detection. Instead, for those configurations, only tip detection is supported. Signed-off-by:
-
Stefan Binding authored
Signed-off-by:
-
Lucas Tanure authored
To accommodate move, cs42l42_resume has been added to mirror the existing function cs42l42_suspend. Function cs42l42_reset is no longer required, since cs42l42_resume and cs42l42_suspend perform the same operations. Signed-off-by:
-
Lucas Tanure authored
Signed-off-by:
-
