- 12 Dec, 2018 5 commits
-
-
Nir Dotan authored
Add specific ACL operations needed for programming multicast routing ACL groups and routes. Signed-off-by: Nir Dotan <nird@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nir Dotan authored
Add virtual router ID fields to Spectrum-2 key blocks set, as the field is required for multicast routing. Signed-off-by: Nir Dotan <nird@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nir Dotan authored
In Spectrum-2, MC routing is implemented using ACL block explicitly, so router initialization should take place after ACL initialization. Set the initialization of the ACL block before IP router initizalization takes place, so multicast router will be able to allocate ACL data structures and create its required chains. Signed-off-by: Nir Dotan <nird@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nir Dotan authored
In Spectrum-2, multicast routing is implemented explicitly using policy engine (ACL) block. PEMRBT register is used to bind a dedicated ACL group to a specific IP protocol. Add the register to be later used in multicast router implementation. Signed-off-by: Nir Dotan <nird@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xue Chaojing authored
There is no need to schedule a different tasklet for refill, This patch remove it. Suggested-by: Neil Horman <nhorman@redhat.com> Signed-off-by: Xue Chaojing <xuechaojing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 11 Dec, 2018 4 commits
-
-
Daniel Borkmann authored
Minor markup fixup from bpf-next into net-next merge in the BPF helper description of bpf_sk_lookup_tcp() and bpf_sk_lookup_udp(). Also sync up the copy of bpf.h from tooling infrastructure. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf-next 2018-12-11 The following pull-request contains BPF updates for your *net-next* tree. It has three minor merge conflicts, resolutions: 1) tools/testing/selftests/bpf/test_verifier.c Take first chunk with alignment_prevented_execution. 2) net/core/filter.c [...] case bpf_ctx_range_ptr(struct __sk_buff, flow_keys): case bpf_ctx_range(struct __sk_buff, wire_len): return false; [...] 3) include/uapi/linux/bpf.h Take the second chunk for the two cases each. The main changes are: 1) Add support for BPF line info via BTF and extend libbpf as well as bpftool's program dump to annotate output with BPF C code to facilitate debugging and introspection, from Martin. 2) Add support for BPF_ALU | BPF_ARSH | BPF_{K,X} in interpreter and all JIT backends, from Jiong. 3) Improve BPF test coverage on archs with no efficient unaligned access by adding an "any alignment" flag to the BPF program load to forcefully disable verifier alignment checks, from David. 4) Add a new bpf_prog_test_run_xattr() API to libbpf which allows for proper use of BPF_PROG_TEST_RUN with data_out, from Lorenz. 5) Extend tc BPF programs to use a new __sk_buff field called wire_len for more accurate accounting of packets going to wire, from Petar. 6) Improve bpftool to allow dumping the trace pipe from it and add several improvements in bash completion and map/prog dump, from Quentin. 7) Optimize arm64 BPF JIT to always emit movn/movk/movk sequence for kernel addresses and add a dedicated BPF JIT backend allocator, from Ard. 8) Add a BPF helper function for IR remotes to report mouse movements, from Sean. 9) Various cleanups in BPF prog dump e.g. to make UAPI bpf_prog_info member naming consistent with existing conventions, from Yonghong and Song. 10) Misc cleanups and improvements in allowing to pass interface name via cmdline for xdp1 BPF example, from Matteo. 11) Fix a potential segfault in BPF sample loader's kprobes handling, from Daniel T. 12) Fix SPDX license in libbpf's README.rst, from Andrey. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
Adding and removing neighbor entries to / from the gc_list need to be done while holding the table lock; a couple of places were missed in the original patch. Move the list_add_tail in neigh_alloc to ___neigh_create where the lock is already obtained. Since neighbor entries should rarely be moved to/from PERMANENT state, add lock/unlock around the gc_list changes in neigh_change_state rather than extending the lock hold around all neighbor updates. Fixes: 58956317 ("neighbor: Improve garbage collection") Reported-by: Andrei Vagin <avagin@gmail.com> Reported-by: syzbot+6cc2fd1d3bdd2e007363@syzkaller.appspotmail.com Reported-by: syzbot+35e87b87c00f386b041f@syzkaller.appspotmail.com Reported-by: syzbot+b354d1fb59091ea73c37@syzkaller.appspotmail.com Reported-by: syzbot+3ddead5619658537909b@syzkaller.appspotmail.com Reported-by: syzbot+424d47d5c456ce8b2bbe@syzkaller.appspotmail.com Reported-by: syzbot+e4d42eb35f6a27b0a628@syzkaller.appspotmail.com Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed: ==================== mlx5e-updates-2018-12-10 (gre) This patch set adds GRE offloading support to Mellanox ethernet driver. Patches 1-5 replace the existing egdev mechanism with the new TC indirect block binds mechanism that was introduced by Netronome: 7f76fa36 ("net: sched: register callbacks for indirect tc block binds") Patches 6-9 add GRE offloading support along with some required refactoring work. Patch 10, Add netif_is_gretap()/netif_is_ip6gretap() - Changed the is_gretap_dev and is_ip6gretap_dev logic from structure comparison to string comparison of the rtnl_link_ops kind field. Patch 11, add GRE offloading support to mlx5. Patch 12 removes the egdev mechanism from TC as it is no longer used by any of the drivers. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 10 Dec, 2018 31 commits
-
-
Oz Shlomo authored
The egdev mechanism was replaced by the TC indirect block notifications platform. Signed-off-by: Oz Shlomo <ozsh@mellanox.com> Reviewed-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Cc: John Hurley <john.hurley@netronome.com> Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Oz Shlomo authored
Add HW offloading support for TC flower filters configured on gretap/ip6gretap net devices. Signed-off-by: Oz Shlomo <ozsh@mellanox.com> Reviewed-by: Eli Britstein <elibr@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Oz Shlomo authored
Changed the is_gretap_dev and is_ip6gretap_dev logic from structure comparison to string comparison of the rtnl_link_ops kind field. This approach aligns with the current identification methods and function names of vxlan and geneve network devices. Convert mlxsw to use these helpers and use them in downstream mlx5 patch. Signed-off-by: Oz Shlomo <ozsh@mellanox.com> Reviewed-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Oz Shlomo authored
Move tunnel offloading related code to a separate source file for better code maintainability. Code refactoring with no functional change. Signed-off-by: Oz Shlomo <ozsh@mellanox.com> Reviewed-by: Eli Britstein <elibr@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Oz Shlomo authored
Currently the tunnel offloading encap/decap methods assumes that VXLAN is the sole tunneling protocol. Lay the infrastructure for supporting multiple tunneling protocols by branching according to the tunnel net device kind. Encap filters tunnel type is determined according to the egress/mirred net device. Decap filters classify the tunnel type according to the filter's ingress net device kind. Distinguish between the tunnel type as defined by the SW model and the FW reformat type that specifies the HW operation being made. Signed-off-by: Oz Shlomo <ozsh@mellanox.com> Reviewed-by: Eli Britstein <elibr@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Oz Shlomo authored
Separates the vxlan header match handling from the matching on the general fields of ipv4/6 tunnels, thus allowing the common IP tunnel match code to branch in down stream patch, to multiple IP tunnels. This patch doesn't add any functionality. Signed-off-by: Oz Shlomo <ozsh@mellanox.com> Reviewed-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Oz Shlomo authored
Separates the vxlan header encap logic from the general ipv4/6 encapsulation methods, thus allowing the common IP encap/decap code to branch in downstream patch to multiple IP tunnels. Code refactoring with no functional change. Signed-off-by: Oz Shlomo <ozsh@mellanox.com> Reviewed-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Oz Shlomo authored
Use TC indirect block notifications to offload filters that are configured on higher level device interfaces (e.g. tunnel devices). This mechanism replaces the current egdev implementation. Signed-off-by: Oz Shlomo <ozsh@mellanox.com> Reviewed-by: Eli Britstein <elibr@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Oz Shlomo authored
Propagate the filter's net_device parameter to the tc flower parsed attributes structure so that it can later be used in tunnel decap offloading sequences. Pre-step for replacing egdev logic with the indirect block notification mechanism. Signed-off-by: Oz Shlomo <ozsh@mellanox.com> Reviewed-by: Eli Britstein <elibr@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Oz Shlomo authored
Currently the driver controls flower filters that are installed on its devices. However, with the introduction of the indirect block notifications platform the driver may receive control events for filters that are installed on higher level net devices (e.g. tunnel devices). Therefore, the driver filter control API will not be able to implicitly assume the filter's net device. Explicitly specify the filter's net device, no functional change Signed-off-by: Oz Shlomo <ozsh@mellanox.com> Reviewed-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Oz Shlomo authored
Towards using this mechanism as the means to offload tunnel decap rules set on SW tunnel devices instead of egdev, add the supporting structures and functions. Signed-off-by: Oz Shlomo <ozsh@mellanox.com> Reviewed-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Oz Shlomo authored
Currently only a single field in the representor private structure is relevant for uplink representors. As a pre-step to allow adding additional uplink representor fields, introduce uplink representor private structure. This is prepration step towards replacing egdev logic with the indirect block notification mechanism. This patch doesn't change any functionality. Signed-off-by: Oz Shlomo <ozsh@mellanox.com> Reviewed-by: Eli Britstein <elibr@mellanox.com> Acked-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linuxSaeed Mahameed authored
mlx5-next shared branch with rdma subtree to avoid mlx5 rdma v.s. netdev conflicts. Highlights: 1) RDMA ODP (On Demand Paging) improvements and moving ODP logic to mlx5 RDMA driver 2) Improved mlx5 core driver and device events handling and provided API for upper layers to subscribe to device events. 3) RDMA only code cleanup from mlx5 core 4) Add helper to get CQE opcode 5) Rework handling of port module events 6) shared mlx5_ifc.h updates to avoid conflicts Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Alexei Starovoitov authored
Yonghong Song says: ==================== Before func_info and line_info are added to the kernel, there are several fields in structure bpf_prog_info specifying the "count" of a user buffer, e.g., __u32 nr_jited_ksyms; __u32 nr_jited_func_lens; The naming convention has the prefix "nr_". The func_info and line_info support added several fields __u32 func_info_cnt; __u32 line_info_cnt; __u32 jited_line_info_cnt; to indicate the "count" of buffers func_info, line_info and jited_line_info. The original intention is to keep the field names the same as those in structure bpf_attr, so it will be clear that the "count" returned to user space will be the same as the one passed to the kernel during prog load. Unfortunately, the field names *_info_cnt are not consistent with other existing fields in bpf_prog_info. This patch set renamed the fields *_info_cnt to nr_*_info to keep naming convention consistent. ==================== Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
Yonghong Song authored
Rename all occurances of *_info_cnt field access to nr_*_info in tools directory. The local variables finfo_cnt, linfo_cnt and jited_linfo_cnt in function do_dump() of tools/bpf/bpftool/prog.c are also changed to nr_finfo, nr_linfo and nr_jited_linfo to keep naming convention consistent. Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
Yonghong Song authored
Sync kernel uapi bpf.h "*_info_cnt => nr_*_info" changes to tools directory. Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
Yonghong Song authored
In uapi bpf.h, currently we have the following fields in the struct bpf_prog_info: __u32 func_info_cnt; __u32 line_info_cnt; __u32 jited_line_info_cnt; The above field names "func_info_cnt" and "line_info_cnt" also appear in union bpf_attr for program loading. The original intention is to keep the names the same between bpf_prog_info and bpf_attr so it will imply what we returned to user space will be the same as what the user space passed to the kernel. Such a naming convention in bpf_prog_info is not consistent with other fields like: __u32 nr_jited_ksyms; __u32 nr_jited_func_lens; This patch made this adjustment so in bpf_prog_info newly introduced *_info_cnt becomes nr_*_info. Acked-by: Song Liu <songliubraving@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
Song Liu authored
info.nr_jited_ksyms and info.nr_jited_func_lens cannot be 0 in these two statements, so we don't need to check them. Signed-off-by: Song Liu <songliubraving@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
Or Gerlitz authored
This isn't used anywhere across the mlx5 driver stack, remove it. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Eli Britstein authored
Update the flow steering command formatting according to the extended destination API. Note that the FW dictates that multi destination FTEs that involve at least one encap must use the extended destination format, while single destination ones must use the legacy format. Using extended destination format requires FW support. Check for its capabilities and return error if not supported. Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Oz Shlomo <ozsh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Eli Britstein authored
Change the driver flow destination struct to use bit flags with the vhca id valid being the 1st one. The flags field is more extendable and will be used in downstream patch. Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Oz Shlomo <ozsh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Eli Britstein authored
Extended destinations provide the ability to configure different encapsulation properties per destination on a single FTE. This is needed for use-cases such as remote mirroring over tunneled networks. Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Oz Shlomo <ozsh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Oz Shlomo authored
GRE RFC defines a 32 bit key field. NVGRE RFC splits the 32 bit key field to 24 bit VSID (gre_key_h) and 8 bit flow entropy (gre_key_l). Define the two key parsing alternatives in a union, thus enabling both access methods. Signed-off-by: Oz Shlomo <ozsh@mellanox.com> Reviewed-by: Eli Britstein <elibr@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Eyal Davidovich authored
Will be used in downstream patch to monitor counter changes by the HCA and report it to the driver by an event. The driver will update its counters cached data accordingly. Signed-off-by: Eyal Davidovich <eyald@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Mikhael Goikhman authored
Support a new hardware module status in port module events: - module_status=0x4 (Cable plugged, but disabled) Signed-off-by: Mikhael Goikhman <migo@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Mikhael Goikhman authored
Support a new hardware error type in port module events: - error_type=0xc (PCIe system power slot exceeded) Signed-off-by: Mikhael Goikhman <migo@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Mikhael Goikhman authored
Add explicit HW defined error values. For simplicity, keep counters for all statuses starting from 0, although currently status=0 is not used. Additionally, when HW signals an unexpected cable status, it is reported now rather than ignored. And status counter is now updated on errors. Signed-off-by: Mikhael Goikhman <migo@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Martin KaFai Lau authored
This patch fixes a few newline issues and also replaces p_err with p_info in prog.c Fixes: b053b439 ("bpf: libbpf: bpftool: Print bpf_line_info during prog dump") Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
Eric Dumazet authored
In commit f9bfe4e6 ("tcp: lack of available data can also cause TSO defer") we moved the test in tcp_tso_should_defer() for packets with a FIN flag, and we mentioned that the same would be done later for EOR flag. Both flags should be handled at the same time, after all other heuristics have been considered. They both mean that no more bytes can be added to this skb by an application. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Marek Vasut says: ==================== net: dsa: ksz: Add reset GPIO handling Add code to handle optional reset GPIO in the KSZ switch driver and a matching DT property adjustments. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Marek Vasut authored
Add code to handle optional reset GPIO in the KSZ switch driver. The switch has a reset GPIO line which can be controlled by the CPU, so make sure it is configured correctly in such setups. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Cc: Woojung Huh <woojung.huh@microchip.com> Cc: David S. Miller <davem@davemloft.net> Cc: Tristram Ha <Tristram.Ha@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-