- 20 Jan, 2023 10 commits
-
-
George Kennedy authored
The call to get_user_pages_fast() in vmci_host_setup_notify() can return NULL context->notify_page causing a GPF. To avoid GPF check if context->notify_page == NULL and return error if so. general protection fault, probably for non-canonical address 0xe0009d1000000060: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: maybe wild-memory-access in range [0x0005088000000300- 0x0005088000000307] CPU: 2 PID: 26180 Comm: repro_34802241 Not tainted 6.1.0-rc4 #1 Hardware name: Red Hat KVM, BIOS 1.15.0-2.module+el8.6.0 04/01/2014 RIP: 0010:vmci_ctx_check_signal_notify+0x91/0xe0 Call Trace: <TASK> vmci_host_unlocked_ioctl+0x362/0x1f40 __x64_sys_ioctl+0x1a1/0x230 do_syscall_64+0x3a/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: a1d88436 ("VMCI: Fix two UVA mapping bugs") Reported-by:syzkaller <syzkaller@googlegroups.com> Signed-off-by:
George Kennedy <george.kennedy@oracle.com> Reviewed-by:
Vishnu Dasa <vdasa@vmware.com> Link: https://lore.kernel.org/r/1669666705-24012-1-git-send-email-george.kennedy@oracle.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Yang Yingliang authored
If add device "stratix10-rsu" failed in stratix10_svc_drv_probe(), the 'svc_fifo' and 'genpool' need be freed in the error path. If allocate or add device "intel-fcs" failed in stratix10_svc_drv_probe(), the device "stratix10-rsu" need be unregistered in the error path. Fixes: e6281c26 ("firmware: stratix10-svc: Add support for FCS") Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Signed-off-by:
Dinh Nguyen <dinguyen@kernel.org> Link: https://lore.kernel.org/r/20221129163602.462369-2-dinguyen@kernel.orgSigned-off-by:
-
Yang Yingliang authored
In error path in stratix10_svc_drv_probe(), gen_pool_destroy() should be called to destroy the memory pool that created by svc_create_memory_pool(). Fixes: 7ca5ce89 ("firmware: add Intel Stratix10 service layer driver") Signed-off-by:
-
Xiongfeng Wang authored
As comment of pci_get_class() says, it returns a pci_device with its refcount increased and decreased the refcount for the input parameter @from if it is not NULL. If we break the loop in applicom_init() with 'dev' not NULL, we need to call pci_dev_put() to decrease the refcount. Add the missing pci_dev_put() to avoid refcount leak. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Xiongfeng Wang <wangxiongfeng2@huawei.com> Link: https://lore.kernel.org/r/20221122114035.24194-1-wangxiongfeng2@huawei.comSigned-off-by:
-
Kai Ye authored
Define the device isolation strategy by the device driver. The user configures a hardware error threshold value by uacce interface. If the number of hardware errors exceeds the value of setting error threshold in one hour. The device will not be available in user space. The VF device use the PF device isolation strategy. All the hardware errors are processed by PF driver. Signed-off-by:
Kai Ye <yekai13@huawei.com> Acked-by:
Herbert Xu <herbert@gondor.apana.org.au> Link: https://lore.kernel.org/r/20221119074817.12063-4-yekai13@huawei.comSigned-off-by:
-
Kai Ye authored
Update documentation describing sysfs node that could help to configure hardware error threshold for users in the user space. And describing sysfs node that could read the device isolated state. Signed-off-by:
-
Kai Ye authored
UACCE adds the hardware error isolation feature. To improve service reliability, some uacce devices that frequently encounter hardware errors are isolated. Therefore, this feature is added. Users can configure the hardware error threshold by 'isolate_strategy' sysfs node. The user space can get the device isolated state by 'isolate' sysfs node. If the number of device errors exceeds the configured error threshold, the device will be isolated. It means the uacce device is unavailable. Signed-off-by:
-
Paulo Miguel Almeida authored
It's common for drivers that share same physical components to also duplicate source code (or at least portions of it). A good example is both drivers/gpu/drm/amdgpu/* and drivers/gpu/drm/radeon/* have a header file called atombios.h. While their contents aren't the same, a lot of their structs have the exact same names which makes navigating through the code base a bit messy as cscope will show up 'references' across drivers which aren't exactly correct. Add IGNORE_DIRS variable, which specifies which directories to be ignored from indexing. Example: make ARCH=x86 IGNORE_DIRS="drivers/gpu/drm/radeon tools" cscope Signed-off-by:Paulo Miguel Almeida <paulo.miguel.almeida.rodenas@gmail.com> Reviewed-by:
Nicolas Schier <nicolas@fjasle.eu> Reviewed-by:
Vipin Sharma <vipinsh@google.com> Link: https://lore.kernel.org/r/Y5jf59VCL/HAt60q@mail.google.comSigned-off-by:
-
Yuan Can authored
A problem about idt_89hpesx create debugfs failed is triggered with the following log given: [ 4973.269647] debugfs: Directory 'idt_csr' with parent '/' already present! The reason is that idt_init() returns i2c_add_driver() directly without checking its return value, if i2c_add_driver() failed, it returns without destroy the newly created debugfs, resulting the debugfs of idt_csr can never be created later. idt_init() debugfs_create_dir() # create debugfs directory i2c_add_driver() driver_register() bus_add_driver() priv = kzalloc(...) # OOM happened # return without destroy debugfs directory Fix by removing debugfs when i2c_add_driver() returns error. Fixes: cfad6425 ("eeprom: Add IDT 89HPESx EEPROM/CSR driver") Signed-off-by:Yuan Can <yuancan@huawei.com> Acked-by:
Serge Semin <fancer.lancer@gmail.com> Link: https://lore.kernel.org/r/20221110020030.47711-1-yuancan@huawei.comSigned-off-by:
-
Andy Shevchenko authored
Replace open coded fwnode_device_is_compatible() in the driver. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230119175742.77723-1-andriy.shevchenko@linux.intel.comSigned-off-by:
-
- 19 Jan, 2023 10 commits
-
-
Ian Abbott authored
Comedi INSN_CONFIG instructions have different expected instructtion data lengths depending on the type of configuration instruction specified by the first word of data. This is checked by `check_insn_config_length()`. There are a few configuration instructions whose data lengths are not currently checked, usually for rare configuration instructions that are implemented differently by different drivers. For unknown configuration instructions, the function logs a warning and accepts the specified data length. The `INSN_CONFIG_GET_PWM_OUTPUT` configuration instruction length is not currently checked, but all the places it is currently used expect a data length of 3. (These places are `ni_get_pwm_config()` in "ni_mio_common.c", and `pci1760_pwm_insn_config()` in "adv_pci1760.c".) Make this length official by checking it in `check_insn_config_length()`. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/20230103151127.19287-1-abbotti@mev.co.ukSigned-off-by:
-
Randy Dunlap authored
Bring the Comedi menu in line with most other device drivers by using "menuconfig" instead of "config" for the top-level entry. This also fixes a menu presentation issue with xconfig. Fixes: ed9eccbe ("Staging: add comedi core") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: David Schleef <ds@schleef.org> Cc: Shawn Bohrer <shawn.bohrer@gmail.com> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20230110064844.18533-1-rdunlap@infradead.orgSigned-off-by:
-
Randy Dunlap authored
Don't separate a function's kernel-doc comment and its definition with macros or data; move the macro and data ahead of the function and its comments to prevent a warning: drivers/misc/genwqe/card_utils.c:162: warning: expecting prototype for genwqe_init_crc32(). Prototype was for CRC32_POLYNOMIAL() instead Signed-off-by:
-
Duoming Zhou authored
This reverts commit be826ada. The function monitor_card() is a timer handler that runs in an atomic context, but it calls usleep_range() that can sleep. As a result, the sleep-in-atomic-context bugs will happen. The process is shown below: (atomic context) monitor_card() set_protocol() usleep_range() //sleep The origin commit c1986ee9 ("[PATCH] New Omnikey Cardman 4000 driver") works fine. Fixes: be826ada ("char: pcmcia: cm4000_cs: Replace mdelay with usleep_range in set_protocol") Signed-off-by:
Duoming Zhou <duoming@zju.edu.cn> Link: https://lore.kernel.org/r/20230118141000.5580-1-duoming@zju.edu.cnSigned-off-by:
-
Randy Dunlap authored
Remove all kernel-doc "/**" markers; just use "/*" comments since these are not in kernel-doc format. This eliminates 11 kernel-doc warnings: drivers/char/pcmcia/synclink_cs.c:487: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * line discipline callback wrappers drivers/char/pcmcia/synclink_cs.c:3861: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * called by generic HDLC layer when protocol selected (PPP, frame relay, etc.) drivers/char/pcmcia/synclink_cs.c:3914: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * called by generic HDLC layer to send frame drivers/char/pcmcia/synclink_cs.c:3959: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * called by network layer when interface enabled drivers/char/pcmcia/synclink_cs.c:4022: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * called by network layer when interface is disabled drivers/char/pcmcia/synclink_cs.c:4053: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * called by network layer to process IOCTL call to network device drivers/char/pcmcia/synclink_cs.c:4156: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * called by network layer when transmit timeout is detected drivers/char/pcmcia/synclink_cs.c:4179: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * called by device driver when transmit completes drivers/char/pcmcia/synclink_cs.c:4191: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * called by device driver when frame received drivers/char/pcmcia/synclink_cs.c:4231: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * called by device driver when adding device instance drivers/char/pcmcia/synclink_cs.c:4279: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * called by device driver when removing device instance Signed-off-by:
-
Randy Dunlap authored
Tell kconfig users what "MOST" means so that they can have a bit of information about what it is. I.e., more than zero information. Signed-off-by:
-
Randy Dunlap authored
Fix various W=1 kernel-doc warnings in drivers/most/: drivers/most/most_usb.c:669: warning: Excess function parameter 'data' description in 'link_stat_timer_handler' drivers/most/most_usb.c:769: warning: cannot understand function prototype: 'const struct file_operations hdm_usb_fops = ' drivers/most/most_usb.c:776: warning: cannot understand function prototype: 'const struct usb_device_id usbid[] = ' drivers/most/most_cdev.c:301: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Initialization of struct file_operations drivers/most/most_cdev.c:414: warning: Function parameter or member 'args' not described in 'comp_probe' drivers/most/most_snd.c:56: warning: Function parameter or member 'pcm_hardware' not described in 'channel' drivers/most/most_snd.c:56: warning: Function parameter or member 'copy_fn' not described in 'channel' drivers/most/most_snd.c:404: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Initialization of struct snd_pcm_ops drivers/most/most_snd.c:514: warning: Function parameter or member 'device_name' not described in 'audio_probe_channel' drivers/most/most_snd.c:703: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Initialization of the struct most_component Signed-off-by:
-
Randy Dunlap authored
Clean up kernel-doc notation, use correct function and parameter names. drivers/android/binderfs.c:236: warning: expecting prototype for binderfs_ctl_ioctl(). Prototype was for binder_ctl_ioctl() instead drivers/android/binder.c:386: warning: expecting prototype for binder_node_unlock(). Prototype was for binder_node_inner_unlock() instead drivers/android/binder.c:1206: warning: expecting prototype for binder_dec_ref(). Prototype was for binder_dec_ref_olocked() instead drivers/andrond/binder.c:284: warning: Excess function parameter 'proc' description in 'binder_proc_unlock' drivers/andrond/binder.c:387: warning: expecting prototype for binder_node_unlock(). Prototype was for binder_node_inner_unlock() instead Signed-off-by:
Carlos Llamas <cmllamas@google.com> Link: https://lore.kernel.org/r/20230117183745.20842-1-rdunlap@infradead.orgSigned-off-by:
-
Li Li authored
An async transaction to a frozen process will still be successfully put in the queue. But this pending async transaction won't be processed until the target process is unfrozen at an unspecified time in the future. Pass this important information back to the user space caller by returning BR_TRANSACTION_PENDING_FROZEN. Signed-off-by:
Li Li <dualli@google.com> Acked-by:
-
Jiazi.Li authored
In binder_ioctl function, the legitimacy check of cmd size has been done in switch-case code: switch (cmd) { case BINDER_WRITE_READ;//BINDER_WRITE_READ contains size info So unneeded do size check in binder_ioctl and binder_ioctl_write_read again. In the following version of Google GKI: Linux version 5.10.110-android12-9-00011-g2c814f559132-ab8969555 It seems that the compiler has made optimization and has not passed cmd parameters to binder_ioctl_write_read: <binder_ioctl+628>: mov w8, #0x6201 // #25089 <binder_ioctl+632>: movk w8, #0xc030, lsl #16 <binder_ioctl+636>: cmp w20, w8 <binder_ioctl+640>: b.ne 0xffffffda8aa97880 <binder_ioctl+3168> <binder_ioctl+644>: mov x0, x23 //filp <binder_ioctl+648>: mov x1, x27 //arg <binder_ioctl+652>: mov x2, x22 //thread <binder_ioctl+656>: bl 0xffffffda8aa9e6e4 <binder_ioctl_write_read> <binder_ioctl+660>: mov w26, w0 Signed-off-by:Jiazi.Li <jiazi.li@transsion.com> Acked-by:
-
- 15 Jan, 2023 4 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Borislav Petkov: - Make sure the poking PGD is pinned for Xen PV as it requires it this way - Fixes for two resctrl races when moving a task or creating a new monitoring group - Fix SEV-SNP guests running under HyperV where MTRRs are disabled to not return a UC- type mapping type on memremap() and thus cause a serious slowdown - Fix insn mnemonics in bioscall.S now that binutils is starting to fix confusing insn suffixes * tag 'x86_urgent_for_v6.2_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: fix poking_init() for Xen PV guests x86/resctrl: Fix event counts regression in reused RMIDs x86/resctrl: Fix task CLOSID/RMID update race x86/pat: Fix pat_x_mtrr_type() for MTRR disabled case x86/boot: Avoid using Intel mnemonics in AT&T syntax asm
-
git://git.kernel.org/pub/scm/linux/kernel/git/ras/rasLinus Torvalds authored
Pull EDAC fixes from Borislav Petkov: - Fix the EDAC device's confusion in the polling setting units - Fix a memory leak in highbank's probing function * tag 'edac_urgent_for_v6.2_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/highbank: Fix memory leak in highbank_mc_probe() EDAC/device: Fix period calculation in edac_device_reset_delay_period()
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - Fix a build failure with some versions of ld that have an odd version string - Fix incorrect use of mutex in the IMC PMU driver Thanks to Kajol Jain, Michael Petlan, Ojaswin Mujoo, Peter Zijlstra, and Yang Yingliang. * tag 'powerpc-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s/hash: Make stress_hpt_timer_fn() static powerpc/imc-pmu: Fix use of mutex in IRQs disabled section powerpc/boot: Fix incorrect version calculation issue in ld_version
-
- 14 Jan, 2023 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds authored
Pull iommu fixes from Joerg Roedel: - Core: Fix an iommu-group refcount leak - Fix overflow issue in IOVA alloc path - ARM-SMMU fixes from Will: - Fix VFIO regression on NXP SoCs by reporting IOMMU_CAP_CACHE_COHERENCY - Fix SMMU shutdown paths to avoid device unregistration race - Error handling fix for Mediatek IOMMU driver * tag 'iommu-fixes-v6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/mediatek-v1: Fix an error handling path in mtk_iommu_v1_probe() iommu/iova: Fix alloc iova overflows issue iommu: Fix refcount leak in iommu_device_claim_dma_owner iommu/arm-smmu-v3: Don't unregister on shutdown iommu/arm-smmu: Don't unregister on shutdown iommu/arm-smmu: Report IOMMU_CAP_CACHE_COHERENCY even betterer -
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblockLinus Torvalds authored
Pull memblock fix from Mike Rapoport: "memblock: always release pages to the buddy allocator in memblock_free_late() If CONFIG_DEFERRED_STRUCT_PAGE_INIT is enabled, memblock_free_pages() only releases pages to the buddy allocator if they are not in the deferred range. This is correct for free pages (as defined by for_each_free_mem_pfn_range_in_zone()) because free pages in the deferred range will be initialized and released as part of the deferred init process. memblock_free_pages() is called by memblock_free_late(), which is used to free reserved ranges after memblock_free_all() has run. All pages in reserved ranges have been initialized at that point, and accordingly, those pages are not touched by the deferred init process. This means that currently, if the pages that memblock_free_late() intends to release are in the deferred range, they will never be released to the buddy allocator. They will forever be reserved. In addition, memblock_free_pages() calls kmsan_memblock_free_pages(), which is also correct for free pages but is not correct for reserved pages. KMSAN metadata for reserved pages is initialized by kmsan_init_shadow(), which runs shortly before memblock_free_all(). For both of these reasons, memblock_free_pages() should only be called for free pages, and memblock_free_late() should call __free_pages_core() directly instead. One case where this issue can occur in the wild is EFI boot on x86_64. The x86 EFI code reserves all EFI boot services memory ranges via memblock_reserve() and frees them later via memblock_free_late() (efi_reserve_boot_services() and efi_free_boot_services(), respectively). If any of those ranges happens to fall within the deferred init range, the pages will not be released and that memory will be unavailable. For example, on an Amazon EC2 t3.micro VM (1 GB) booting via EFI: v6.2-rc2: Node 0, zone DMA spanned 4095 present 3999 managed 3840 Node 0, zone DMA32 spanned 246652 present 245868 managed 178867 v6.2-rc2 + patch: Node 0, zone DMA spanned 4095 present 3999 managed 3840 Node 0, zone DMA32 spanned 246652 present 245868 managed 222816 # +43,949 pages" * tag 'fixes-2023-01-14' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock: mm: Always release pages to the buddy allocator in memblock_free_late(). -
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull kernel hardening fixes from Kees Cook: - Fix CFI hash randomization with KASAN (Sami Tolvanen) - Check size of coreboot table entry and use flex-array * tag 'hardening-v6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: kbuild: Fix CFI hash randomization with KASAN firmware: coreboot: Check size of table entry and use flex-array
-
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linuxLinus Torvalds authored
Pull module fix from Luis Chamberlain: "Just one fix for modules by Nick" * tag 'modules-6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: kallsyms: Fix scheduling with interrupts disabled in self-test
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: - memory leak and double free fix - two symlink fixes - minor cleanup fix - two smb1 fixes * tag '6.2-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: Fix uninitialized memory read for smb311 posix symlink create cifs: fix potential memory leaks in session setup cifs: do not query ifaces on smb1 mounts cifs: fix double free on failed kerberos auth cifs: remove redundant assignment to the variable match cifs: fix file info setting in cifs_open_file() cifs: fix file info setting in cifs_query_path_info()
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Two minor fixes in the hisi_sas driver which only impact enterprise style multi-expander and shared disk situations and no core changes" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: hisi_sas: Set a port invalid only if there are no devices attached when refreshing port id scsi: hisi_sas: Use abort task set to reset SAS disks when discovered
-
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libataLinus Torvalds authored
Pull ATA fix from Damien Le Moal: "A single fix to prevent building the pata_cs5535 driver with user mode linux as it uses msr operations that are not defined with UML" * tag 'ata-6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: pata_cs5535: Don't build on UML
-
- 13 Jan, 2023 9 commits
-
-
git://git.kernel.dk/linuxLinus Torvalds authored
Pull block fixes from Jens Axboe: "Nothing major in here, just a collection of NVMe fixes and dropping a wrong might_sleep() that static checkers tripped over but which isn't valid" * tag 'block-6.2-2023-01-13' of git://git.kernel.dk/linux: MAINTAINERS: stop nvme matching for nvmem files nvme: don't allow unprivileged passthrough on partitions nvme: replace the "bool vec" arguments with flags in the ioctl path nvme: remove __nvme_ioctl nvme-pci: fix error handling in nvme_pci_enable() nvme-pci: add NVME_QUIRK_IDENTIFY_CNS quirk to Apple T2 controllers nvme-apple: add NVME_QUIRK_IDENTIFY_CNS quirk to fix regression block: Drop spurious might_sleep() from blk_put_queue()
-
git://git.kernel.dk/linuxLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: "A fix for a regression that happened last week, rest is fixes that will be headed to stable as well. In detail: - Fix for a regression added with the leak fix from last week (me) - In writing a test case for that leak, inadvertently discovered a case where we a poll request can race. So fix that up and mark it for stable, and also ensure that fdinfo covers both the poll tables that we have. The latter was an oversight when the split poll table were added (me) - Fix for a lockdep reported issue with IOPOLL (Pavel)" * tag 'io_uring-6.2-2023-01-13' of git://git.kernel.dk/linux: io_uring: lock overflowing for IOPOLL io_uring/poll: attempt request issue after racy poll wakeup io_uring/fdinfo: include locked hash table in fdinfo output io_uring/poll: add hash if ready poll request can't complete inline io_uring/io-wq: only free worker if it was allocated for creation -
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull pci fixes from Bjorn Helgaas: - Work around apparent firmware issue that made Linux reject MMCONFIG space, which broke PCI extended config space (Bjorn Helgaas) - Fix CONFIG_PCIE_BT1 dependency due to mid-air collision between a PCI_MSI_IRQ_DOMAIN -> PCI_MSI change and addition of PCIE_BT1 (Lukas Bulwahn) * tag 'pci-v6.2-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: x86/pci: Treat EfiMemoryMappedIO as reservation of ECAM space x86/pci: Simplify is_mmconf_reserved() messages PCI: dwc: Adjust to recent removal of PCI_MSI_IRQ_DOMAIN
-
Sami Tolvanen authored
Clang emits a asan.module_ctor constructor to each object file when KASAN is enabled, and these functions are indirectly called in do_ctors. With CONFIG_CFI_CLANG, the compiler also emits a CFI type hash before each address-taken global function so they can pass indirect call checks. However, in commit 0c3e806e ("x86/cfi: Add boot time hash randomization"), x86 implemented boot time hash randomization, which relies on the .cfi_sites section generated by objtool. As objtool is run against vmlinux.o instead of individual object files with X86_KERNEL_IBT (enabled by default), CFI types in object files that are not part of vmlinux.o end up not being included in .cfi_sites, and thus won't get randomized and trip CFI when called. Only .vmlinux.export.o and init/version-timestamp.o are linked into vmlinux separately from vmlinux.o. As these files don't contain any functions, disable KASAN for both of them to avoid breaking hash randomization. Link: https://github.com/ClangBuiltLinux/linux/issues/1742 Fixes: 0c3e806e ("x86/cfi: Add boot time hash randomization") Signed-off-by:
Sami Tolvanen <samitolvanen@google.com> Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20230112224948.1479453-2-samitolvanen@google.com
-
Kees Cook authored
The memcpy() of the data following a coreboot_table_entry couldn't be evaluated by the compiler under CONFIG_FORTIFY_SOURCE. To make it easier to reason about, add an explicit flexible array member to struct coreboot_device so the entire entry can be copied at once. Additionally, validate the sizes before copying. Avoids this run-time false positive warning: memcpy: detected field-spanning write (size 168) of single field "&device->entry" at drivers/firmware/google/coreboot_table.c:103 (size 8) Reported-by:
Paul Menzel <pmenzel@molgen.mpg.de> Link: https://lore.kernel.org/all/03ae2704-8c30-f9f0-215b-7cdf4ad35a9a@molgen.mpg.de/ Cc: Jack Rosenthal <jrosenth@chromium.org> Cc: Guenter Roeck <groeck@chromium.org> Cc: Julius Werner <jwerner@chromium.org> Cc: Brian Norris <briannorris@chromium.org> Cc: Stephen Boyd <swboyd@chromium.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Julius Werner <jwerner@chromium.org> Reviewed-by:
Guenter Roeck <groeck@chromium.org> Link: https://lore.kernel.org/r/20230107031406.gonna.761-kees@kernel.orgReviewed-by:
Stephen Boyd <swboyd@chromium.org> Reviewed-by:
Jack Rosenthal <jrosenth@chromium.org> Link: https://lore.kernel.org/r/20230112230312.give.446-kees@kernel.org
-
Nicholas Piggin authored
kallsyms_on_each* may schedule so must not be called with interrupts disabled. The iteration function could disable interrupts, but this also changes lookup_symbol() to match the change to the other timing code. Reported-by:
Erhard F. <erhard_f@mailbox.org> Link: https://lore.kernel.org/all/bug-216902-206035@https.bugzilla.kernel.org%2F/Reported-by:
kernel test robot <oliver.sang@intel.com> Link: https://lore.kernel.org/oe-lkp/202212251728.8d0872ff-oliver.sang@intel.com Fixes: 30f3bb09 ("kallsyms: Add self-test facility") Tested-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
Luis Chamberlain <mcgrof@kernel.org>
-
Peter Foley authored
This driver uses MSR functions that aren't implemented under UML. Avoid building it to prevent tripping up allyesconfig. e.g. /usr/lib/gcc/x86_64-pc-linux-gnu/12/../../../../x86_64-pc-linux-gnu/bin/ld: pata_cs5535.c:(.text+0x3a3): undefined reference to `__tracepoint_read_msr' /usr/lib/gcc/x86_64-pc-linux-gnu/12/../../../../x86_64-pc-linux-gnu/bin/ld: pata_cs5535.c:(.text+0x3d2): undefined reference to `__tracepoint_write_msr' /usr/lib/gcc/x86_64-pc-linux-gnu/12/../../../../x86_64-pc-linux-gnu/bin/ld: pata_cs5535.c:(.text+0x457): undefined reference to `__tracepoint_write_msr' /usr/lib/gcc/x86_64-pc-linux-gnu/12/../../../../x86_64-pc-linux-gnu/bin/ld: pata_cs5535.c:(.text+0x481): undefined reference to `do_trace_write_msr' /usr/lib/gcc/x86_64-pc-linux-gnu/12/../../../../x86_64-pc-linux-gnu/bin/ld: pata_cs5535.c:(.text+0x4d5): undefined reference to `do_trace_write_msr' /usr/lib/gcc/x86_64-pc-linux-gnu/12/../../../../x86_64-pc-linux-gnu/bin/ld: pata_cs5535.c:(.text+0x4f5): undefined reference to `do_trace_read_msr' /usr/lib/gcc/x86_64-pc-linux-gnu/12/../../../../x86_64-pc-linux-gnu/bin/ld: pata_cs5535.c:(.text+0x51c): undefined reference to `do_trace_write_msr' Signed-off-by:
Peter Foley <pefoley2@pefoley.com> Reviewed-by:
Damien Le Moal <damien.lemoal@opensource.wdc.com>
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm fixes from Paolo Bonzini: "ARM: - Fix the PMCR_EL0 reset value after the PMU rework - Correctly handle S2 fault triggered by a S1 page table walk by not always classifying it as a write, as this breaks on R/O memslots - Document why we cannot exit with KVM_EXIT_MMIO when taking a write fault from a S1 PTW on a R/O memslot - Put the Apple M2 on the naughty list for not being able to correctly implement the vgic SEIS feature, just like the M1 before it - Reviewer updates: Alex is stepping down, replaced by Zenghui x86: - Fix various rare locking issues in Xen emulation and teach lockdep to detect them - Documentation improvements - Do not return host topology information from KVM_GET_SUPPORTED_CPUID" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86/xen: Avoid deadlock by adding kvm->arch.xen.xen_lock leaf node lock KVM: Ensure lockdep knows about kvm->lock vs. vcpu->mutex ordering rule KVM: x86/xen: Fix potential deadlock in kvm_xen_update_runstate_guest() KVM: x86/xen: Fix lockdep warning on "recursive" gpc locking Documentation: kvm: fix SRCU locking order docs KVM: x86: Do not return host topology information from KVM_GET_SUPPORTED_CPUID KVM: nSVM: clarify recalc_intercepts() wrt CR8 MAINTAINERS: Remove myself as a KVM/arm64 reviewer MAINTAINERS: Add Zenghui Yu as a KVM/arm64 reviewer KVM: arm64: vgic: Add Apple M2 cpus to the list of broken SEIS implementations KVM: arm64: Convert FSC_* over to ESR_ELx_FSC_* KVM: arm64: Document the behaviour of S1PTW faults on RO memslots KVM: arm64: Fix S1PTW handling on RO memslots KVM: arm64: PMU: Fix PMCR_EL0 reset value -
Mateusz Guzik authored
On the x86-64 architecture even a failing cmpxchg grants exclusive access to the cacheline, making it preferable to retry the failed op immediately instead of stalling with the pause instruction. To illustrate the impact, below are benchmark results obtained by running various will-it-scale tests on top of the 6.2-rc3 kernel and Cascade Lake (2 sockets * 24 cores * 2 threads) CPU. All results in ops/s. Note there is some variance in re-runs, but the code is consistently faster when contention is present. open3 ("Same file open/close"): proc stock no-pause 1 805603 814942 (+%1) 2 1054980 1054781 (-0%) 8 1544802 1822858 (+18%) 24 1191064 2199665 (+84%) 48 851582 1469860 (+72%) 96 609481 1427170 (+134%) fstat2 ("Same file fstat"): proc stock no-pause 1 3013872 3047636 (+1%) 2 4284687 4400421 (+2%) 8 3257721 5530156 (+69%) 24 2239819 5466127 (+144%) 48 1701072 5256609 (+209%) 96 1269157 6649326 (+423%) Additionally, a kernel with a private patch to help access() scalability: access2 ("Same file access"): proc stock patched patched +nopause 24 2378041 2005501 5370335 (-15% / +125%) That is, fixing the problems in access itself *reduces* scalability after the cacheline ping-pong only happens in lockref with the pause instruction. Note that fstat and access benchmarks are not currently integrated into will-it-scale, but interested parties can find them in pull requests to said project. Code at hand has a rather tortured history. First modification showed up in commit d472d9d9 ("lockref: Relax in cmpxchg loop"), written with Itanium in mind. Later it got patched up to use an arch-dependent macro to stop doing it on s390 where it caused a significant regression. Said macro had undergone revisions and was ultimately eliminated later, going back to cpu_relax. While I intended to only remove cpu_relax for x86-64, I got the following comment from Linus: I would actually prefer just removing it entirely and see if somebody else hollers. You have the numbers to prove it hurts on real hardware, and I don't think we have any numbers to the contrary. So I think it's better to trust the numbers and remove it as a failure, than say "let's just remove it on x86-64 and leave everybody else with the potentially broken code" Additionally, Will Deacon (maintainer of the arm64 port, one of the architectures previously benchmarked): So, from the arm64 side of the fence, I'm perfectly happy just removing the cpu_relax() calls from lockref. As such, come back full circle in history and whack it altogether. Signed-off-by:Mateusz Guzik <mjguzik@gmail.com> Link: https://lore.kernel.org/all/CAGudoHHx0Nqg6DE70zAVA75eV-HXfWyhVMWZ-aSeOofkA_=WdA@mail.gmail.com/ Acked-by: Tony Luck <tony.luck@intel.com> # ia64 Acked-by: Nicholas Piggin <npiggin@gmail.com> # powerpc Acked-by: Will Deacon <will@kernel.org> # arm64 Acked-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
