- 16 Oct, 2020 1 commit
-
-
Filipe Manana authored
When doing a fallocate() we have a short time window, after reserving an extent and before starting a transaction, where if relocation for the block group containing the reserved extent happens, we can end up missing the extent in the data relocation inode causing relocation to fail later. This only happens when we don't pass a transaction to the internal fallocate function __btrfs_prealloc_file_range(), which is for all the cases where fallocate() is called from user space (the internal use cases include space cache extent allocation and relocation). When the race triggers the relocation failure, it produces a trace like the following: [200611.995995] ------------[ cut here ]------------ [200611.997084] BTRFS: Transaction aborted (error -2) [200611.998208] WARNING: CPU: 3 PID: 235845 at fs/btrfs/ctree.c:1074 __btrfs_cow_block+0x3a0/0x5b0 [btrfs] [200611.999042] Modules linked in: dm_thin_pool dm_persistent_data (...) [200612.003287] CPU: 3 PID: 235845 Comm: btrfs Not tainted 5.9.0-rc6-btrfs-next-69 #1 [200612.004442] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [200612.006186] RIP: 0010:__btrfs_cow_block+0x3a0/0x5b0 [btrfs] [200612.007110] Code: 1b 00 00 02 72 2a 83 f8 fb 0f 84 b8 01 (...) [200612.007341] BTRFS warning (device sdb): Skipping commit of aborted transaction. [200612.008959] RSP: 0018:ffffaee38550f918 EFLAGS: 00010286 [200612.009672] BTRFS: error (device sdb) in cleanup_transaction:1901: errno=-30 Readonly filesystem [200612.010428] RAX: 0000000000000000 RBX: ffff9174d96f4000 RCX: 0000000000000000 [200612.011078] BTRFS info (device sdb): forced readonly [200612.011862] RDX: 0000000000000001 RSI: ffffffffa8161978 RDI: 00000000ffffffff [200612.013215] RBP: ffff9172569a0f80 R08: 0000000000000000 R09: 0000000000000000 [200612.014263] R10: 0000000000000000 R11: 0000000000000000 R12: ffff9174b8403b88 [200612.015203] R13: ffff9174b8400a88 R14: ffff9174c90f1000 R15: ffff9174a5a60e08 [200612.016182] FS: 00007fa55cf878c0(0000) GS:ffff9174ece00000(0000) knlGS:0000000000000000 [200612.017174] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [200612.018418] CR2: 00007f8fb8048148 CR3: 0000000428a46003 CR4: 00000000003706e0 [200612.019510] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [200612.020648] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [200612.021520] Call Trace: [200612.022434] btrfs_cow_block+0x10b/0x250 [btrfs] [200612.023407] do_relocation+0x54e/0x7b0 [btrfs] [200612.024343] ? do_raw_spin_unlock+0x4b/0xc0 [200612.025280] ? _raw_spin_unlock+0x29/0x40 [200612.026200] relocate_tree_blocks+0x3bc/0x6d0 [btrfs] [200612.027088] relocate_block_group+0x2f3/0x600 [btrfs] [200612.027961] btrfs_relocate_block_group+0x15e/0x340 [btrfs] [200612.028896] btrfs_relocate_chunk+0x38/0x110 [btrfs] [200612.029772] btrfs_balance+0xb22/0x1790 [btrfs] [200612.030601] ? btrfs_ioctl_balance+0x253/0x380 [btrfs] [200612.031414] btrfs_ioctl_balance+0x2cf/0x380 [btrfs] [200612.032279] btrfs_ioctl+0x620/0x36f0 [btrfs] [200612.033077] ? _raw_spin_unlock+0x29/0x40 [200612.033948] ? handle_mm_fault+0x116d/0x1ca0 [200612.034749] ? up_read+0x18/0x240 [200612.035542] ? __x64_sys_ioctl+0x83/0xb0 [200612.036244] __x64_sys_ioctl+0x83/0xb0 [200612.037269] do_syscall_64+0x33/0x80 [200612.038190] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [200612.038976] RIP: 0033:0x7fa55d07ed87 [200612.040127] Code: 00 00 00 48 8b 05 09 91 0c 00 64 c7 00 26 (...) [200612.041669] RSP: 002b:00007ffd5ebf03e8 EFLAGS: 00000206 ORIG_RAX: 0000000000000010 [200612.042437] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007fa55d07ed87 [200612.043511] RDX: 00007ffd5ebf0470 RSI: 00000000c4009420 RDI: 0000000000000003 [200612.044250] RBP: 0000000000000003 R08: 000055d8362642a0 R09: 00007fa55d148be0 [200612.044963] R10: fffffffffffff52e R11: 0000000000000206 R12: 00007ffd5ebf1614 [200612.045683] R13: 00007ffd5ebf0470 R14: 0000000000000002 R15: 00007ffd5ebf0470 [200612.046361] irq event stamp: 0 [200612.047040] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [200612.047725] hardirqs last disabled at (0): [<ffffffffa6eb5ab3>] copy_process+0x823/0x1bc0 [200612.048387] softirqs last enabled at (0): [<ffffffffa6eb5ab3>] copy_process+0x823/0x1bc0 [200612.049024] softirqs last disabled at (0): [<0000000000000000>] 0x0 [200612.049722] ---[ end trace 49006c6876e65227 ]--- The race happens like this: 1) Task A starts an fallocate() (plain or zero range) and it calls __btrfs_prealloc_file_range() with the 'trans' parameter set to NULL; 2) Task A calls btrfs_reserve_extent() and gets an extent that belongs to block group X; 3) Before task A gets into btrfs_replace_file_extents(), through the call to insert_prealloc_file_extent(), task B starts relocation of block group X; 4) Task B enters btrfs_relocate_block_group() and it sets block group X to RO mode; 5) Task B enters relocate_block_group(), it calls prepare_to_relocate() whichs joins/starts a transaction and then commits the transaction; 6) Task B then starts scanning the extent tree looking for extents that belong to block group X - it does not find yet the extent reserved by task A, since that extent was not yet added to the extent tree, as its delayed reference was not even yet created at this point; 7) The data relocation inode ends up not having the extent reserved by task A associated to it; 8) Task A then starts a transaction through btrfs_replace_file_extents(), inserts a file extent item in the subvolume tree pointing to the reserved extent and creates a delayed reference for it; 9) Task A finishes and returns success to user space; 10) Later on, while relocation is still in progress, the leaf where task A inserted the new file extent item is COWed, so we end up at __btrfs_cow_block(), which calls btrfs_reloc_cow_block(), and that in turn calls relocation.c:replace_file_extents(); 11) At relocation.c:replace_file_extents() we iterate over all the items in the leaf and find the file extent item pointing to the extent that was allocated by task A, and then call relocation.c:get_new_location(), to find the new location for the extent; 12) However relocation.c:get_new_location() fails, returning -ENOENT, because it couldn't find a corresponding file extent item associated with the data relocation inode. This is because the extent was not seen in the extent tree at step 6). The -ENOENT error is propagated to __btrfs_cow_block(), which aborts the transaction. So fix this simply by decrementing the block group's number of reservations after calling insert_prealloc_file_extent(), as relocation waits for that counter to go down to zero before calling prepare_to_relocate() and start looking for extents in the extent tree. This issue only started to happen recently as of commit 8fccebfa ("btrfs: fix metadata reservation for fallocate that leads to transaction aborts"), because now we can reserve an extent before starting/joining a transaction, and previously we always did it after that, so relocation ended up waiting for a concurrent fallocate() to finish because before searching for the extents of the block group, it starts/joins a transaction and then commits it (at prepare_to_relocate()), which made it wait for the fallocate task to complete first. Fixes: 8fccebfa ("btrfs: fix metadata reservation for fallocate that leads to transaction aborts") Reviewed-by:Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
- 07 Oct, 2020 39 commits
-
-
Nikolay Borisov authored
Commit 8d875f95 ("btrfs: disable strict file flushes for renames and truncates") eliminated the notion of ordered operations and instead BTRFS_INODE_ORDERED_DATA_CLOSE only remained as a flag indicating that a file's content should be synced to disk in case a file is truncated and any writes happen to it concurrently. In fact this intendend behavior was broken until it was fixed in f6dc45c7 ("Btrfs: fix filemap_flush call in btrfs_file_release"). All things considered let's give the flag a more descriptive name. Also slightly reword comments. Signed-off-by:
Nikolay Borisov <nborisov@suse.com> Reviewed-by:
-
Madhuparna Bhowmik authored
This patch fixes the following sparse errors in fs/btrfs/super.c in function btrfs_show_devname() fs/btrfs/super.c: error: incompatible types in comparison expression (different address spaces): fs/btrfs/super.c: struct rcu_string [noderef] <asn:4> * fs/btrfs/super.c: struct rcu_string * The error was because of the following line in function btrfs_show_devname(): if (first_dev) seq_escape(m, rcu_str_deref(first_dev->name), " \t\n\\"); Annotating the btrfs_device::name member with __rcu fixes the sparse error. Acked-by:
Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by:
Madhuparna Bhowmik <madhuparnabhowmik04@gmail.com> Signed-off-by:
-
Anand Jain authored
Many things can happen after the device is scanned and before the device is mounted. One such thing is losing the BTRFS_MAGIC on the device. If it happens we still won't free that device from the memory and cause the userland confusion. For example: As the BTRFS_IOC_DEV_INFO still carries the device path which does not have the BTRFS_MAGIC, 'btrfs fi show' still lists device which does not belong to the filesystem anymore: $ mkfs.btrfs -fq -draid1 -mraid1 /dev/sda /dev/sdb $ wipefs -a /dev/sdb # /dev/sdb does not contain magic signature $ mount -o degraded /dev/sda /btrfs $ btrfs fi show -m Label: none uuid: 470ec6fb-646b-4464-b3cb-df1b26c527bd Total devices 2 FS bytes used 128.00KiB devid 1 size 3.00GiB used 571.19MiB path /dev/sda devid 2 size 3.00GiB used 571.19MiB path /dev/sdb We need to distinguish the missing signature and invalid superblock, so add a specific error code ENODATA for that. This also fixes failure of fstest btrfs/198. CC: stable@vger.kernel.org # 4.19+ Reviewed-by:
Anand Jain <anand.jain@oracle.com> Reviewed-by:
-
Josef Bacik authored
In fstest btrfs/064 a transaction abort in __btrfs_cow_block could lead to a system lockup. It gets stuck trying to write back inodes, and the write back thread was trying to lock an extent buffer: $ cat /proc/2143497/stack [<0>] __btrfs_tree_lock+0x108/0x250 [<0>] lock_extent_buffer_for_io+0x35e/0x3a0 [<0>] btree_write_cache_pages+0x15a/0x3b0 [<0>] do_writepages+0x28/0xb0 [<0>] __writeback_single_inode+0x54/0x5c0 [<0>] writeback_sb_inodes+0x1e8/0x510 [<0>] wb_writeback+0xcc/0x440 [<0>] wb_workfn+0xd7/0x650 [<0>] process_one_work+0x236/0x560 [<0>] worker_thread+0x55/0x3c0 [<0>] kthread+0x13a/0x150 [<0>] ret_from_fork+0x1f/0x30 This is because we got an error while COWing a block, specifically here if (test_bit(BTRFS_ROOT_SHAREABLE, &root->state)) { ret = btrfs_reloc_cow_block(trans, root, buf, cow); if (ret) { btrfs_abort_transaction(trans, ret); return ret; } } [16402.241552] BTRFS: Transaction aborted (error -2) [16402.242362] WARNING: CPU: 1 PID: 2563188 at fs/btrfs/ctree.c:1074 __btrfs_cow_block+0x376/0x540 [16402.249469] CPU: 1 PID: 2563188 Comm: fsstress Not tainted 5.9.0-rc6+ #8 [16402.249936] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 [16402.250525] RIP: 0010:__btrfs_cow_block+0x376/0x540 [16402.252417] RSP: 0018:ffff9cca40e578b0 EFLAGS: 00010282 [16402.252787] RAX: 0000000000000025 RBX: 0000000000000002 RCX: ffff9132bbd19388 [16402.253278] RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ffff9132bbd19380 [16402.254063] RBP: ffff9132b41a49c0 R08: 0000000000000000 R09: 0000000000000000 [16402.254887] R10: 0000000000000000 R11: ffff91324758b080 R12: ffff91326ef17ce0 [16402.255694] R13: ffff91325fc0f000 R14: ffff91326ef176b0 R15: ffff9132815e2000 [16402.256321] FS: 00007f542c6d7b80(0000) GS:ffff9132bbd00000(0000) knlGS:0000000000000000 [16402.256973] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [16402.257374] CR2: 00007f127b83f250 CR3: 0000000133480002 CR4: 0000000000370ee0 [16402.257867] Call Trace: [16402.258072] btrfs_cow_block+0x109/0x230 [16402.258356] btrfs_search_slot+0x530/0x9d0 [16402.258655] btrfs_lookup_file_extent+0x37/0x40 [16402.259155] __btrfs_drop_extents+0x13c/0xd60 [16402.259628] ? btrfs_block_rsv_migrate+0x4f/0xb0 [16402.259949] btrfs_replace_file_extents+0x190/0x820 [16402.260873] btrfs_clone+0x9ae/0xc00 [16402.261139] btrfs_extent_same_range+0x66/0x90 [16402.261771] btrfs_remap_file_range+0x353/0x3b1 [16402.262333] vfs_dedupe_file_range_one.part.0+0xd5/0x140 [16402.262821] vfs_dedupe_file_range+0x189/0x220 [16402.263150] do_vfs_ioctl+0x552/0x700 [16402.263662] __x64_sys_ioctl+0x62/0xb0 [16402.264023] do_syscall_64+0x33/0x40 [16402.264364] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [16402.264862] RIP: 0033:0x7f542c7d15cb [16402.266901] RSP: 002b:00007ffd35944ea8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [16402.267627] RAX: ffffffffffffffda RBX: 00000000009d1968 RCX: 00007f542c7d15cb [16402.268298] RDX: 00000000009d2490 RSI: 00000000c0189436 RDI: 0000000000000003 [16402.268958] RBP: 00000000009d2520 R08: 0000000000000036 R09: 00000000009d2e64 [16402.269726] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000002 [16402.270659] R13: 000000000001f000 R14: 00000000009d1970 R15: 00000000009d2e80 [16402.271498] irq event stamp: 0 [16402.271846] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [16402.272497] hardirqs last disabled at (0): [<ffffffff910dbf59>] copy_process+0x6b9/0x1ba0 [16402.273343] softirqs last enabled at (0): [<ffffffff910dbf59>] copy_process+0x6b9/0x1ba0 [16402.273905] softirqs last disabled at (0): [<0000000000000000>] 0x0 [16402.274338] ---[ end trace 737874a5a41a8236 ]--- [16402.274669] BTRFS: error (device dm-9) in __btrfs_cow_block:1074: errno=-2 No such entry [16402.276179] BTRFS info (device dm-9): forced readonly [16402.277046] BTRFS: error (device dm-9) in btrfs_replace_file_extents:2723: errno=-2 No such entry [16402.278744] BTRFS: error (device dm-9) in __btrfs_cow_block:1074: errno=-2 No such entry [16402.279968] BTRFS: error (device dm-9) in __btrfs_cow_block:1074: errno=-2 No such entry [16402.280582] BTRFS info (device dm-9): balance: ended with status: -30 The problem here is that as soon as we allocate the new block it is locked and marked dirty in the btree inode. This means that we could attempt to writeback this block and need to lock the extent buffer. However we're not unlocking it here and thus we deadlock. Fix this by unlocking the cow block if we have any errors inside of __btrfs_cow_block, and also free it so we do not leak it. CC: stable@vger.kernel.org # 4.4+ Reviewed-by: -
Goldwyn Rodrigues authored
Since we now perform direct reads using i_rwsem, we can remove this inode flag used to co-ordinate unlocked reads. The truncate call takes i_rwsem. This means it is correctly synchronized with concurrent direct reads. Reviewed-by:
Johannes Thumshirn <jth@kernel.org> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Goldwyn Rodrigues <rgoldwyn@suse.com> Reviewed-by:
-
Goldwyn Rodrigues authored
Since we removed the last user of dio_end_io() when btrfs got converted to iomap infrastructure ("btrfs: switch to iomap for direct IO"), remove the helper function dio_end_io(). Reviewed-by:Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
-
Josef Bacik authored
I noticed when fixing device stats for seed devices that we simply threw away the return value from btrfs_search_slot(). This is because we may not have stat items, but we could very well get an error, and thus miss reporting the error up the chain. Fix this by returning ret if it's an actual error, and then stop trying to init the rest of the devices stats and return the error up the chain. Reviewed-by:
-
Josef Bacik authored
We recently started recording device stats across the fleet, and noticed a large increase in messages such as this BTRFS warning (device dm-0): get dev_stats failed, not yet valid on our tiers that use seed devices for their root devices. This is because we do not initialize the device stats for any seed devices if we have a sprout device and mount using that sprout device. The basic steps for reproducing are: $ mkfs seed device $ mount seed device # fill seed device $ umount seed device $ btrfstune -S 1 seed device $ mount seed device $ btrfs device add -f sprout device /mnt/wherever $ umount /mnt/wherever $ mount sprout device /mnt/wherever $ btrfs device stats /mnt/wherever This will fail with the above message in dmesg. Fix this by iterating over the fs_devices->seed if they exist in btrfs_init_dev_stats. This fixed the problem and properly reports the stats for both devices. Reviewed-by:
-
Nikolay Borisov authored
It's no longer used just remove the function and any related code which was initialising it for inodes. No functional changes. Removing 8 bytes from extent_io_tree in turn reduces size of other structures where it is embedded, notably btrfs_inode where it reduces size by 24 bytes. Signed-off-by:
-
Nikolay Borisov authored
No need to go through a function pointer indirection simply call submit_bio_hook directly by exporting and renaming the helper to btrfs_submit_metadata_bio. This makes the code more readable and should result in somewhat faster code due to no longer paying the price for specualtive attack mitigations that come with indirect function calls. Signed-off-by:
-
Nikolay Borisov authored
Instead export and rename the function to btrfs_submit_data_bio and call it directly in submit_one_bio. This avoids paying the cost for speculative attacks mitigations and improves code readability. Signed-off-by:
-
Nikolay Borisov authored
Use the is_data_inode helper. Signed-off-by:
-
Nikolay Borisov authored
BTRFS has 2 inode types (for the purposes of the code in submit_one_bio) - ordinary data inodes (including the freespace inode) and the btree inode. Both of these implement submit_bio_hook so btrfsic_submit_bio can never be called from submit_one_bio so just remove it. Signed-off-by:
-
Nikolay Borisov authored
It's no longer used so let's remove it. Signed-off-by:
-
Nikolay Borisov authored
Don't call readpage_end_io_hook for the btree inode. Instead of relying on indirect calls to implement metadata buffer validation simply check if the inode whose page we are processing equals the btree inode. If it does call the necessary function. This is an improvement in 2 directions: 1. We aren't paying the penalty of indirect calls in a post-speculation attacks world. 2. The function is now named more explicitly so it's obvious what's going on This is in preparation to removing struct extent_io_ops altogether. Signed-off-by:
-
Filipe Manana authored
During an incremental send, when an inode has multiple new references we might end up emitting rename operations for orphanizations that have a source path that is no longer valid due to a previous orphanization of some directory inode. This causes the receiver to fail since it tries to rename a path that does not exists. Example reproducer: $ cat reproducer.sh #!/bin/bash mkfs.btrfs -f /dev/sdi >/dev/null mount /dev/sdi /mnt/sdi touch /mnt/sdi/f1 touch /mnt/sdi/f2 mkdir /mnt/sdi/d1 mkdir /mnt/sdi/d1/d2 # Filesystem looks like: # # . (ino 256) # |----- f1 (ino 257) # |----- f2 (ino 258) # |----- d1/ (ino 259) # |----- d2/ (ino 260) btrfs subvolume snapshot -r /mnt/sdi /mnt/sdi/snap1 btrfs send -f /tmp/snap1.send /mnt/sdi/snap1 # Now do a series of changes such that: # # *) inode 258 has one new hardlink and the previous name changed # # *) both names conflict with the old names of two other inodes: # # 1) the new name "d1" conflicts with the old name of inode 259, # under directory inode 256 (root) # # 2) the new name "d2" conflicts with the old name of inode 260 # under directory inode 259 # # *) inodes 259 and 260 now have the old names of inode 258 # # *) inode 257 is now located under inode 260 - an inode with a number # smaller than the inode (258) for which we created a second hard # link and swapped its names with inodes 259 and 260 # ln /mnt/sdi/f2 /mnt/sdi/d1/f2_link mv /mnt/sdi/f1 /mnt/sdi/d1/d2/f1 # Swap d1 and f2. mv /mnt/sdi/d1 /mnt/sdi/tmp mv /mnt/sdi/f2 /mnt/sdi/d1 mv /mnt/sdi/tmp /mnt/sdi/f2 # Swap d2 and f2_link mv /mnt/sdi/f2/d2 /mnt/sdi/tmp mv /mnt/sdi/f2/f2_link /mnt/sdi/f2/d2 mv /mnt/sdi/tmp /mnt/sdi/f2/f2_link # Filesystem now looks like: # # . (ino 256) # |----- d1 (ino 258) # |----- f2/ (ino 259) # |----- f2_link/ (ino 260) # | |----- f1 (ino 257) # | # |----- d2 (ino 258) btrfs subvolume snapshot -r /mnt/sdi /mnt/sdi/snap2 btrfs send -f /tmp/snap2.send -p /mnt/sdi/snap1 /mnt/sdi/snap2 mkfs.btrfs -f /dev/sdj >/dev/null mount /dev/sdj /mnt/sdj btrfs receive -f /tmp/snap1.send /mnt/sdj btrfs receive -f /tmp/snap2.send /mnt/sdj umount /mnt/sdi umount /mnt/sdj When executed the receive of the incremental stream fails: $ ./reproducer.sh Create a readonly snapshot of '/mnt/sdi' in '/mnt/sdi/snap1' At subvol /mnt/sdi/snap1 Create a readonly snapshot of '/mnt/sdi' in '/mnt/sdi/snap2' At subvol /mnt/sdi/snap2 At subvol snap1 At snapshot snap2 ERROR: rename d1/d2 -> o260-6-0 failed: No such file or directory This happens because: 1) When processing inode 257 we end up computing the name for inode 259 because it is an ancestor in the send snapshot, and at that point it still has its old name, "d1", from the parent snapshot because inode 259 was not yet processed. We then cache that name, which is valid until we start processing inode 259 (or set the progress to 260 after processing its references); 2) Later we start processing inode 258 and collecting all its new references into the list sctx->new_refs. The first reference in the list happens to be the reference for name "d1" while the reference for name "d2" is next (the last element of the list). We compute the full path "d1/d2" for this second reference and store it in the reference (its ->full_path member). The path used for the new parent directory was "d1" and not "f2" because inode 259, the new parent, was not yet processed; 3) When we start processing the new references at process_recorded_refs() we start with the first reference in the list, for the new name "d1". Because there is a conflicting inode that was not yet processed, which is directory inode 259, we orphanize it, renaming it from "d1" to "o259-6-0"; 4) Then we start processing the new reference for name "d2", and we realize it conflicts with the reference of inode 260 in the parent snapshot. So we issue an orphanization operation for inode 260 by emitting a rename operation with a destination path of "o260-6-0" and a source path of "d1/d2" - this source path is the value we stored in the reference earlier at step 2), corresponding to the ->full_path member of the reference, however that path is no longer valid due to the orphanization of the directory inode 259 in step 3). This makes the receiver fail since the path does not exists, it should have been "o259-6-0/d2". Fix this by recomputing the full path of a reference before emitting an orphanization if we previously orphanized any directory, since that directory could be a parent in the new path. This is a rare scenario so keeping it simple and not checking if that previously orphanized directory is in fact an ancestor of the inode we are trying to orphanize. A test case for fstests follows soon. CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
-
Filipe Manana authored
When doing an incremental send it is possible that when processing the new references for an inode we end up issuing rename or link operations that have an invalid path, which contains the orphanized name of a directory before we actually orphanized it, causing the receiver to fail. The following reproducer triggers such scenario: $ cat reproducer.sh #!/bin/bash mkfs.btrfs -f /dev/sdi >/dev/null mount /dev/sdi /mnt/sdi touch /mnt/sdi/a touch /mnt/sdi/b mkdir /mnt/sdi/testdir # We want "a" to have a lower inode number then "testdir" (257 vs 259). mv /mnt/sdi/a /mnt/sdi/testdir/a # Filesystem looks like: # # . (ino 256) # |----- testdir/ (ino 259) # | |----- a (ino 257) # | # |----- b (ino 258) btrfs subvolume snapshot -r /mnt/sdi /mnt/sdi/snap1 btrfs send -f /tmp/snap1.send /mnt/sdi/snap1 # Now rename 259 to "testdir_2", then change the name of 257 to # "testdir" and make it a direct descendant of the root inode (256). # Also create a new link for inode 257 with the old name of inode 258. # By swapping the names and location of several inodes and create a # nasty dependency chain of rename and link operations. mv /mnt/sdi/testdir/a /mnt/sdi/a2 touch /mnt/sdi/testdir/a mv /mnt/sdi/b /mnt/sdi/b2 ln /mnt/sdi/a2 /mnt/sdi/b mv /mnt/sdi/testdir /mnt/sdi/testdir_2 mv /mnt/sdi/a2 /mnt/sdi/testdir # Filesystem now looks like: # # . (ino 256) # |----- testdir_2/ (ino 259) # | |----- a (ino 260) # | # |----- testdir (ino 257) # |----- b (ino 257) # |----- b2 (ino 258) btrfs subvolume snapshot -r /mnt/sdi /mnt/sdi/snap2 btrfs send -f /tmp/snap2.send -p /mnt/sdi/snap1 /mnt/sdi/snap2 mkfs.btrfs -f /dev/sdj >/dev/null mount /dev/sdj /mnt/sdj btrfs receive -f /tmp/snap1.send /mnt/sdj btrfs receive -f /tmp/snap2.send /mnt/sdj umount /mnt/sdi umount /mnt/sdj When running the reproducer, the receive of the incremental send stream fails: $ ./reproducer.sh Create a readonly snapshot of '/mnt/sdi' in '/mnt/sdi/snap1' At subvol /mnt/sdi/snap1 Create a readonly snapshot of '/mnt/sdi' in '/mnt/sdi/snap2' At subvol /mnt/sdi/snap2 At subvol snap1 At snapshot snap2 ERROR: link b -> o259-6-0/a failed: No such file or directory The problem happens because of the following: 1) Before we start iterating the list of new references for inode 257, we generate its current path and store it at @valid_path, done at the very beginning of process_recorded_refs(). The generated path is "o259-6-0/a", containing the orphanized name for inode 259; 2) Then we iterate over the list of new references, which has the references "b" and "testdir" in that specific order; 3) We process reference "b" first, because it is in the list before reference "testdir". We then issue a link operation to create the new reference "b" using a target path corresponding to the content at @valid_path, which corresponds to "o259-6-0/a". However we haven't yet orphanized inode 259, its name is still "testdir", and not "o259-6-0". The orphanization of 259 did not happen yet because we will process the reference named "testdir" for inode 257 only in the next iteration of the loop that goes over the list of new references. Fix the issue by having a preliminar iteration over all the new references at process_recorded_refs(). This iteration is responsible only for doing the orphanization of other inodes that have and old reference that conflicts with one of the new references of the inode we are currently processing. The emission of rename and link operations happen now in the next iteration of the new references. A test case for fstests will follow soon. CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
-
Qu Wenruo authored
Commit 259ee775 ("btrfs: tree-checker: Add ROOT_ITEM check") introduced btrfs root item size check, however btrfs root item has two versions, the legacy one which just ends before generation_v2 member, is smaller than current btrfs root item size. This caused btrfs kernel to reject valid but old tree root leaves. Fix this problem by also allowing legacy root item, since kernel can already handle them pretty well and upgrade to newer root item format when needed. Reported-by:
Martin Steigerwald <martin@lichtvoll.de> Fixes: 259ee775 ("btrfs: tree-checker: Add ROOT_ITEM check") CC: stable@vger.kernel.org # 5.4+ Tested-By:
Qu Wenruo <wqu@suse.com> Reviewed-by:
-
David Sterba authored
In the definitions generated by BTRFS_SETGET_HEADER_FUNCS there's direct pointer assignment but we should use the helpers for unaligned access for clarity. It hasn't been a problem so far because of the natural alignment. Similarly for BTRFS_SETGET_STACK_FUNCS, that usually get a structure from stack that has an aligned start but some members may not be aligned due to packing. This as well hasn't caused problems so far. Move the put/get_unaligned_le8 stubs to ctree.h so we can use them. Signed-off-by: -
David Sterba authored
The free space inode stores the tracking data, checksums etc, using the io_ctl structure and moving the pointers. The data are generally aligned to at least 4 bytes (u32 for CRC) so it's not completely unaligned but for clarity we should use the proper helpers whenever a struct is initialized from io_ctl->cur pointer. Signed-off-by: -
David Sterba authored
The header is mapped onto the send buffer and thus its members may be potentially unaligned so use the helpers instead of directly assigning the pointers. This has worked so far but let's use the helpers to make that clear. Signed-off-by: -
Qu Wenruo authored
Btree inode is special compared to all other inode extent io_trees, although it has a btrfs inode, it doesn't have the track_uptodate bit at all. This means a lot of things like extent locking doesn't even need to be applied to btree io tree. Since it's so special, adds a new owner value for it to make debuging a little easier. Signed-off-by:
-
Johannes Thumshirn authored
We have several occurrences of a soft lockup from fstest's generic/175 testcase, which look more or less like this one: watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [xfs_io:10030] Kernel panic - not syncing: softlockup: hung tasks CPU: 0 PID: 10030 Comm: xfs_io Tainted: G L 5.9.0-rc5+ #768 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4-rebuilt.opensuse.org 04/01/2014 Call Trace: <IRQ> dump_stack+0x77/0xa0 panic+0xfa/0x2cb watchdog_timer_fn.cold+0x85/0xa5 ? lockup_detector_update_enable+0x50/0x50 __hrtimer_run_queues+0x99/0x4c0 ? recalibrate_cpu_khz+0x10/0x10 hrtimer_run_queues+0x9f/0xb0 update_process_times+0x28/0x80 tick_handle_periodic+0x1b/0x60 __sysvec_apic_timer_interrupt+0x76/0x210 asm_call_on_stack+0x12/0x20 </IRQ> sysvec_apic_timer_interrupt+0x7f/0x90 asm_sysvec_apic_timer_interrupt+0x12/0x20 RIP: 0010:btrfs_tree_unlock+0x91/0x1a0 [btrfs] RSP: 0018:ffffc90007123a58 EFLAGS: 00000282 RAX: ffff8881cea2fbe0 RBX: ffff8881cea2fbe0 RCX: 0000000000000000 RDX: ffff8881d23fd200 RSI: ffffffff82045220 RDI: ffff8881cea2fba0 RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000032 R10: 0000160000000000 R11: 0000000000001000 R12: 0000000000001000 R13: ffff8882357fd5b0 R14: ffff88816fa76e70 R15: ffff8881cea2fad0 ? btrfs_tree_unlock+0x15b/0x1a0 [btrfs] btrfs_release_path+0x67/0x80 [btrfs] btrfs_insert_replace_extent+0x177/0x2c0 [btrfs] btrfs_replace_file_extents+0x472/0x7c0 [btrfs] btrfs_clone+0x9ba/0xbd0 [btrfs] btrfs_clone_files.isra.0+0xeb/0x140 [btrfs] ? file_update_time+0xcd/0x120 btrfs_remap_file_range+0x322/0x3b0 [btrfs] do_clone_file_range+0xb7/0x1e0 vfs_clone_file_range+0x30/0xa0 ioctl_file_clone+0x8a/0xc0 do_vfs_ioctl+0x5b2/0x6f0 __x64_sys_ioctl+0x37/0xa0 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f87977fc247 RSP: 002b:00007ffd51a2f6d8 EFLAGS: 00000206 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f87977fc247 RDX: 00007ffd51a2f710 RSI: 000000004020940d RDI: 0000000000000003 RBP: 0000000000000004 R08: 00007ffd51a79080 R09: 0000000000000000 R10: 00005621f11352f2 R11: 0000000000000206 R12: 0000000000000000 R13: 0000000000000000 R14: 00005621f128b958 R15: 0000000080000000 Kernel Offset: disabled ---[ end Kernel panic - not syncing: softlockup: hung tasks ]--- All of these lockup reports have the call chain btrfs_clone_files() -> btrfs_clone() in common. btrfs_clone_files() calls btrfs_clone() with both source and destination extents locked and loops over the source extent to create the clones. Conditionally reschedule in the btrfs_clone() loop, to give some time back to other processes. CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by:
-
Denis Efremov authored
Replace kvzalloc() call with kvcalloc() that also checks the size internally. There's a standalone overflow check in the function so we can return invalid parameter combination. Use array_size() helper to compute the memory size for clone_sources_tmp. Cc: Kees Cook <keescook@chromium.org> Signed-off-by:
Denis Efremov <efremov@linux.com> Reviewed-by:
-
Denis Efremov authored
btrfs_ioctl_send() used open-coded kvzalloc implementation earlier. The code was accidentally replaced with kzalloc() call [1]. Restore the original code by using kvzalloc() to allocate sctx->clone_roots. [1] https://patchwork.kernel.org/patch/9757891/#20529627 Fixes: 818e010b ("btrfs: replace opencoded kvzalloc with the helper") CC: stable@vger.kernel.org # 4.14+ Signed-off-by:
-
Nikolay Borisov authored
The passed in ordered_extent struct is always well-formed and contains the inode making the explicit argument redundant. Signed-off-by:
-
Nikolay Borisov authored
It's used to reference the csum root which can be done from the trans handle as well. Simplify the signature and while at it also remove the noinline attribute as the function uses only at most 16 bytes of stack space. Signed-off-by:
-
Nikolay Borisov authored
Signed-off-by:
-
Nikolay Borisov authored
Signed-off-by:
-
Nikolay Borisov authored
Signed-off-by:
-
Nikolay Borisov authored
This makes reading the code a tad easier by decreasing the level of indirection by one. Reviewed-by:
-
Nikolay Borisov authored
It's always set to 0 by the 2 callers so move it inside __do_readpage. Reviewed-by:
-
Nikolay Borisov authored
It's always set to 0 by its sole caller - btrfs_readpage. Simply remove it. Reviewed-by:
-
Nikolay Borisov authored
It's always set to 0 from the sole caller - btrfs_readpage. Reviewed-by:
-
Nikolay Borisov authored
Now that btrfs_readpage is the only caller of extent_read_full_page the latter can be open coded in the former. Use the occassion to rename __extent_read_full_page to extent_read_full_page. To facillitate this change submit_one_bio has to be exported as well. Reviewed-by:
-
Nikolay Borisov authored
It's called only from btrfs_readpage which always passes 0 so just sink the argument into extent_read_full_page. Reviewed-by:
-
Nikolay Borisov authored
Now that this function is only responsible for reading data pages it's no longer necessary to pass get_extent_t parameter across several layers of functions. This patch removes this parameter from multiple functions: __get_extent_map/__do_readpage/__extent_read_full_page/ extent_read_full_page and simply calls btrfs_get_extent directly in __get_extent_map. Reviewed-by:
-
Nikolay Borisov authored
The sole purpose of this function was to satisfy the requirements of __do_readpage. Since that function is no longer used to read metadata pages the need to keep btree_get_extent around has also disappeared. Simply remove it. Reviewed-by:
-
Nikolay Borisov authored
Metadata pages currently use __do_readpage to read metadata pages, unfortunately this function is also used to deal with ordinary data pages. This makes the metadata pages reading code to go through multiple hoops in order to adhere to __do_readpage invariants. Most of these are necessary for data pages which could be compressed. For metadata it's enough to simply build a bio and submit it. To this effect simply call submit_extent_page directly from read_extent_buffer_pages which is the only callpath used to populate extent_buffers with data. This in turn enables further cleanups. Reviewed-by:
-
